| 1 |
/* |
| 2 |
* Device Tree Source for AMCC Redwood(460SX) |
| 3 |
* |
| 4 |
* Copyright 2008 AMCC <[email protected]> |
| 5 |
* |
| 6 |
* This file is licensed under the terms of the GNU General Public |
| 7 |
* License version 2. This program is licensed "as is" without |
| 8 |
* any warranty of any kind, whether express or implied. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
/ { |
| 14 |
#address-cells = <2>; |
| 15 |
#size-cells = <1>; |
| 16 |
model = "amcc,redwood"; |
| 17 |
compatible = "amcc,redwood"; |
| 18 |
dcr-parent = <&{/cpus/cpu@0}>; |
| 19 |
|
| 20 |
aliases { |
| 21 |
ethernet0 = &EMAC0; |
| 22 |
serial0 = &UART0; |
| 23 |
}; |
| 24 |
|
| 25 |
cpus { |
| 26 |
#address-cells = <1>; |
| 27 |
#size-cells = <0>; |
| 28 |
|
| 29 |
cpu@0 { |
| 30 |
device_type = "cpu"; |
| 31 |
model = "PowerPC,460SX"; |
| 32 |
reg = <0x00000000>; |
| 33 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 34 |
timebase-frequency = <0>; /* Filled in by U-Boot */ |
| 35 |
i-cache-line-size = <32>; |
| 36 |
d-cache-line-size = <32>; |
| 37 |
i-cache-size = <32768>; |
| 38 |
d-cache-size = <32768>; |
| 39 |
dcr-controller; |
| 40 |
dcr-access-method = "native"; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
memory { |
| 45 |
device_type = "memory"; |
| 46 |
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ |
| 47 |
}; |
| 48 |
|
| 49 |
UIC0: interrupt-controller0 { |
| 50 |
compatible = "ibm,uic-460sx","ibm,uic"; |
| 51 |
interrupt-controller; |
| 52 |
cell-index = <0>; |
| 53 |
dcr-reg = <0x0c0 0x009>; |
| 54 |
#address-cells = <0>; |
| 55 |
#size-cells = <0>; |
| 56 |
#interrupt-cells = <2>; |
| 57 |
}; |
| 58 |
|
| 59 |
UIC1: interrupt-controller1 { |
| 60 |
compatible = "ibm,uic-460sx","ibm,uic"; |
| 61 |
interrupt-controller; |
| 62 |
cell-index = <1>; |
| 63 |
dcr-reg = <0x0d0 0x009>; |
| 64 |
#address-cells = <0>; |
| 65 |
#size-cells = <0>; |
| 66 |
#interrupt-cells = <2>; |
| 67 |
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ |
| 68 |
interrupt-parent = <&UIC0>; |
| 69 |
}; |
| 70 |
|
| 71 |
UIC2: interrupt-controller2 { |
| 72 |
compatible = "ibm,uic-460sx","ibm,uic"; |
| 73 |
interrupt-controller; |
| 74 |
cell-index = <2>; |
| 75 |
dcr-reg = <0x0e0 0x009>; |
| 76 |
#address-cells = <0>; |
| 77 |
#size-cells = <0>; |
| 78 |
#interrupt-cells = <2>; |
| 79 |
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ |
| 80 |
interrupt-parent = <&UIC0>; |
| 81 |
}; |
| 82 |
|
| 83 |
UIC3: interrupt-controller3 { |
| 84 |
compatible = "ibm,uic-460sx","ibm,uic"; |
| 85 |
interrupt-controller; |
| 86 |
cell-index = <3>; |
| 87 |
dcr-reg = <0x0f0 0x009>; |
| 88 |
#address-cells = <0>; |
| 89 |
#size-cells = <0>; |
| 90 |
#interrupt-cells = <2>; |
| 91 |
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ |
| 92 |
interrupt-parent = <&UIC0>; |
| 93 |
}; |
| 94 |
|
| 95 |
SDR0: sdr { |
| 96 |
compatible = "ibm,sdr-460sx"; |
| 97 |
dcr-reg = <0x00e 0x002>; |
| 98 |
}; |
| 99 |
|
| 100 |
CPR0: cpr { |
| 101 |
compatible = "ibm,cpr-460sx"; |
| 102 |
dcr-reg = <0x00c 0x002>; |
| 103 |
}; |
| 104 |
|
| 105 |
plb { |
| 106 |
compatible = "ibm,plb-460sx", "ibm,plb4"; |
| 107 |
#address-cells = <2>; |
| 108 |
#size-cells = <1>; |
| 109 |
ranges; |
| 110 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 111 |
|
| 112 |
SDRAM0: sdram { |
| 113 |
compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; |
| 114 |
dcr-reg = <0x010 0x002>; |
| 115 |
}; |
| 116 |
|
| 117 |
MAL0: mcmal { |
| 118 |
compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; |
| 119 |
dcr-reg = <0x180 0x62>; |
| 120 |
num-tx-chans = <4>; |
| 121 |
num-rx-chans = <32>; |
| 122 |
#address-cells = <1>; |
| 123 |
#size-cells = <1>; |
| 124 |
interrupt-parent = <&UIC1>; |
| 125 |
interrupts = < /*TXEOB*/ 0x6 0x4 |
| 126 |
/*RXEOB*/ 0x7 0x4 |
| 127 |
/*SERR*/ 0x1 0x4 |
| 128 |
/*TXDE*/ 0x2 0x4 |
| 129 |
/*RXDE*/ 0x3 0x4 |
| 130 |
/*COAL TX0*/ 0x18 0x2 |
| 131 |
/*COAL TX1*/ 0x19 0x2 |
| 132 |
/*COAL TX2*/ 0x1a 0x2 |
| 133 |
/*COAL TX3*/ 0x1b 0x2 |
| 134 |
/*COAL RX0*/ 0x1c 0x2 |
| 135 |
/*COAL RX1*/ 0x1d 0x2 |
| 136 |
/*COAL RX2*/ 0x1e 0x2 |
| 137 |
/*COAL RX3*/ 0x1f 0x2>; |
| 138 |
}; |
| 139 |
|
| 140 |
POB0: opb { |
| 141 |
compatible = "ibm,opb-460sx", "ibm,opb"; |
| 142 |
#address-cells = <1>; |
| 143 |
#size-cells = <1>; |
| 144 |
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; |
| 145 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 146 |
|
| 147 |
EBC0: ebc { |
| 148 |
compatible = "ibm,ebc-460sx", "ibm,ebc"; |
| 149 |
dcr-reg = <0x012 0x002>; |
| 150 |
#address-cells = <2>; |
| 151 |
#size-cells = <1>; |
| 152 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 153 |
/* ranges property is supplied by U-Boot */ |
| 154 |
interrupts = <0x6 0x4>; |
| 155 |
interrupt-parent = <&UIC1>; |
| 156 |
|
| 157 |
nor_flash@0,0 { |
| 158 |
compatible = "amd,s29gl512n", "cfi-flash"; |
| 159 |
bank-width = <2>; |
| 160 |
reg = <0x0000000 0x00000000 0x04000000>; |
| 161 |
#address-cells = <1>; |
| 162 |
#size-cells = <1>; |
| 163 |
partition@0 { |
| 164 |
label = "kernel"; |
| 165 |
reg = <0x00000000 0x001e0000>; |
| 166 |
}; |
| 167 |
partition@1e0000 { |
| 168 |
label = "dtb"; |
| 169 |
reg = <0x001e0000 0x00020000>; |
| 170 |
}; |
| 171 |
partition@200000 { |
| 172 |
label = "ramdisk"; |
| 173 |
reg = <0x00200000 0x01400000>; |
| 174 |
}; |
| 175 |
partition@1600000 { |
| 176 |
label = "jffs2"; |
| 177 |
reg = <0x01600000 0x00400000>; |
| 178 |
}; |
| 179 |
partition@1a00000 { |
| 180 |
label = "user"; |
| 181 |
reg = <0x01a00000 0x02560000>; |
| 182 |
}; |
| 183 |
partition@3f60000 { |
| 184 |
label = "env"; |
| 185 |
reg = <0x03f60000 0x00040000>; |
| 186 |
}; |
| 187 |
partition@3fa0000 { |
| 188 |
label = "u-boot"; |
| 189 |
reg = <0x03fa0000 0x00060000>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
UART0: serial@ef600200 { |
| 195 |
device_type = "serial"; |
| 196 |
compatible = "ns16550"; |
| 197 |
reg = <0xef600200 0x00000008>; |
| 198 |
virtual-reg = <0xef600200>; |
| 199 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 200 |
current-speed = <0>; /* Filled in by U-Boot */ |
| 201 |
interrupt-parent = <&UIC0>; |
| 202 |
interrupts = <0x0 0x4>; |
| 203 |
}; |
| 204 |
|
| 205 |
RGMII0: emac-rgmii@ef600900 { |
| 206 |
compatible = "ibm,rgmii-460sx", "ibm,rgmii"; |
| 207 |
reg = <0xef600900 0x00000008>; |
| 208 |
}; |
| 209 |
|
| 210 |
EMAC0: ethernet@ef600a00 { |
| 211 |
device_type = "network"; |
| 212 |
compatible = "ibm,emac-460sx", "ibm,emac4"; |
| 213 |
interrupt-parent = <&EMAC0>; |
| 214 |
interrupts = <0x0 0x1>; |
| 215 |
#interrupt-cells = <1>; |
| 216 |
#address-cells = <0>; |
| 217 |
#size-cells = <0>; |
| 218 |
interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4 |
| 219 |
/*Wake*/ 0x1 &UIC2 0x1d 0x4>; |
| 220 |
reg = <0xef600a00 0x00000070>; |
| 221 |
local-mac-address = [000000000000]; /* Filled in by U-Boot */ |
| 222 |
mal-device = <&MAL0>; |
| 223 |
mal-tx-channel = <0>; |
| 224 |
mal-rx-channel = <0>; |
| 225 |
cell-index = <0>; |
| 226 |
max-frame-size = <9000>; |
| 227 |
rx-fifo-size = <4096>; |
| 228 |
tx-fifo-size = <2048>; |
| 229 |
rx-fifo-size-gige = <16384>; |
| 230 |
phy-mode = "rgmii"; |
| 231 |
phy-map = <0x00000000>; |
| 232 |
rgmii-device = <&RGMII0>; |
| 233 |
rgmii-channel = <0>; |
| 234 |
has-inverted-stacr-oc; |
| 235 |
has-new-stacr-staopc; |
| 236 |
}; |
| 237 |
}; |
| 238 |
PCIE0: pcie@d00000000 { |
| 239 |
device_type = "pci"; |
| 240 |
#interrupt-cells = <1>; |
| 241 |
#size-cells = <2>; |
| 242 |
#address-cells = <3>; |
| 243 |
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; |
| 244 |
primary; |
| 245 |
port = <0x0>; /* port number */ |
| 246 |
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ |
| 247 |
0x0000000c 0x10000000 0x00001000>; /* Registers */ |
| 248 |
dcr-reg = <0x100 0x020>; |
| 249 |
sdr-base = <0x300>; |
| 250 |
|
| 251 |
/* Outbound ranges, one memory and one IO, |
| 252 |
* later cannot be changed |
| 253 |
*/ |
| 254 |
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 |
| 255 |
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; |
| 256 |
|
| 257 |
/* Inbound 2GB range starting at 0 */ |
| 258 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| 259 |
|
| 260 |
/* This drives busses 10 to 0x1f */ |
| 261 |
bus-range = <0x10 0x1f>; |
| 262 |
|
| 263 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 264 |
* to invert PCIe legacy interrupts). |
| 265 |
* We are de-swizzling here because the numbers are actually for |
| 266 |
* port of the root complex virtual P2P bridge. But I want |
| 267 |
* to avoid putting a node for it in the tree, so the numbers |
| 268 |
* below are basically de-swizzled numbers. |
| 269 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 270 |
*/ |
| 271 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 272 |
interrupt-map = < |
| 273 |
0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ |
| 274 |
0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ |
| 275 |
0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ |
| 276 |
0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; |
| 277 |
}; |
| 278 |
|
| 279 |
PCIE1: pcie@d20000000 { |
| 280 |
device_type = "pci"; |
| 281 |
#interrupt-cells = <1>; |
| 282 |
#size-cells = <2>; |
| 283 |
#address-cells = <3>; |
| 284 |
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; |
| 285 |
primary; |
| 286 |
port = <0x1>; /* port number */ |
| 287 |
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ |
| 288 |
0x0000000c 0x10001000 0x00001000>; /* Registers */ |
| 289 |
dcr-reg = <0x120 0x020>; |
| 290 |
sdr-base = <0x340>; |
| 291 |
|
| 292 |
/* Outbound ranges, one memory and one IO, |
| 293 |
* later cannot be changed |
| 294 |
*/ |
| 295 |
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 |
| 296 |
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; |
| 297 |
|
| 298 |
/* Inbound 2GB range starting at 0 */ |
| 299 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| 300 |
|
| 301 |
/* This drives busses 10 to 0x1f */ |
| 302 |
bus-range = <0x20 0x2f>; |
| 303 |
|
| 304 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 305 |
* to invert PCIe legacy interrupts). |
| 306 |
* We are de-swizzling here because the numbers are actually for |
| 307 |
* port of the root complex virtual P2P bridge. But I want |
| 308 |
* to avoid putting a node for it in the tree, so the numbers |
| 309 |
* below are basically de-swizzled numbers. |
| 310 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 311 |
*/ |
| 312 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 313 |
interrupt-map = < |
| 314 |
0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ |
| 315 |
0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ |
| 316 |
0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ |
| 317 |
0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; |
| 318 |
}; |
| 319 |
|
| 320 |
PCIE2: pcie@d40000000 { |
| 321 |
device_type = "pci"; |
| 322 |
#interrupt-cells = <1>; |
| 323 |
#size-cells = <2>; |
| 324 |
#address-cells = <3>; |
| 325 |
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; |
| 326 |
primary; |
| 327 |
port = <0x2>; /* port number */ |
| 328 |
reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ |
| 329 |
0x0000000c 0x10002000 0x00001000>; /* Registers */ |
| 330 |
dcr-reg = <0x140 0x020>; |
| 331 |
sdr-base = <0x370>; |
| 332 |
|
| 333 |
/* Outbound ranges, one memory and one IO, |
| 334 |
* later cannot be changed |
| 335 |
*/ |
| 336 |
ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 |
| 337 |
0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; |
| 338 |
|
| 339 |
/* Inbound 2GB range starting at 0 */ |
| 340 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| 341 |
|
| 342 |
/* This drives busses 10 to 0x1f */ |
| 343 |
bus-range = <0x30 0x3f>; |
| 344 |
|
| 345 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 346 |
* to invert PCIe legacy interrupts). |
| 347 |
* We are de-swizzling here because the numbers are actually for |
| 348 |
* port of the root complex virtual P2P bridge. But I want |
| 349 |
* to avoid putting a node for it in the tree, so the numbers |
| 350 |
* below are basically de-swizzled numbers. |
| 351 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 352 |
*/ |
| 353 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 354 |
interrupt-map = < |
| 355 |
0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ |
| 356 |
0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ |
| 357 |
0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ |
| 358 |
0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; |
| 359 |
}; |
| 360 |
|
| 361 |
}; |
| 362 |
|
| 363 |
|
| 364 |
chosen { |
| 365 |
stdout-path = "/plb/opb/serial@ef600200"; |
| 366 |
}; |
| 367 |
|
| 368 |
}; |