| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* MPC832x RDB Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2007 Freescale Semiconductor Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "MPC8323ERDB"; |
| 12 |
compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB"; |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
|
| 16 |
aliases { |
| 17 |
ethernet0 = &enet1; |
| 18 |
ethernet1 = &enet0; |
| 19 |
serial0 = &serial0; |
| 20 |
serial1 = &serial1; |
| 21 |
pci0 = &pci0; |
| 22 |
}; |
| 23 |
|
| 24 |
cpus { |
| 25 |
#address-cells = <1>; |
| 26 |
#size-cells = <0>; |
| 27 |
|
| 28 |
PowerPC,8323@0 { |
| 29 |
device_type = "cpu"; |
| 30 |
reg = <0x0>; |
| 31 |
d-cache-line-size = <0x20>; // 32 bytes |
| 32 |
i-cache-line-size = <0x20>; // 32 bytes |
| 33 |
d-cache-size = <16384>; // L1, 16K |
| 34 |
i-cache-size = <16384>; // L1, 16K |
| 35 |
timebase-frequency = <0>; |
| 36 |
bus-frequency = <0>; |
| 37 |
clock-frequency = <0>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
memory@0 { |
| 42 |
device_type = "memory"; |
| 43 |
reg = <0x00000000 0x04000000>; |
| 44 |
}; |
| 45 |
|
| 46 |
soc8323@e0000000 { |
| 47 |
#address-cells = <1>; |
| 48 |
#size-cells = <1>; |
| 49 |
device_type = "soc"; |
| 50 |
compatible = "simple-bus"; |
| 51 |
ranges = <0x0 0xe0000000 0x00100000>; |
| 52 |
reg = <0xe0000000 0x00000200>; |
| 53 |
bus-frequency = <0>; |
| 54 |
|
| 55 |
watchdog@200 { |
| 56 |
device_type = "watchdog"; |
| 57 |
compatible = "mpc83xx_wdt"; |
| 58 |
reg = <0x200 0x100>; |
| 59 |
}; |
| 60 |
|
| 61 |
pmc: power@b00 { |
| 62 |
compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; |
| 63 |
reg = <0xb00 0x100 0xa00 0x100>; |
| 64 |
interrupts = <80 0x8>; |
| 65 |
interrupt-parent = <&ipic>; |
| 66 |
}; |
| 67 |
|
| 68 |
i2c@3000 { |
| 69 |
#address-cells = <1>; |
| 70 |
#size-cells = <0>; |
| 71 |
cell-index = <0>; |
| 72 |
compatible = "fsl-i2c"; |
| 73 |
reg = <0x3000 0x100>; |
| 74 |
interrupts = <14 0x8>; |
| 75 |
interrupt-parent = <&ipic>; |
| 76 |
dfsrr; |
| 77 |
}; |
| 78 |
|
| 79 |
serial0: serial@4500 { |
| 80 |
cell-index = <0>; |
| 81 |
device_type = "serial"; |
| 82 |
compatible = "fsl,ns16550", "ns16550"; |
| 83 |
reg = <0x4500 0x100>; |
| 84 |
clock-frequency = <0>; |
| 85 |
interrupts = <9 0x8>; |
| 86 |
interrupt-parent = <&ipic>; |
| 87 |
}; |
| 88 |
|
| 89 |
serial1: serial@4600 { |
| 90 |
cell-index = <1>; |
| 91 |
device_type = "serial"; |
| 92 |
compatible = "fsl,ns16550", "ns16550"; |
| 93 |
reg = <0x4600 0x100>; |
| 94 |
clock-frequency = <0>; |
| 95 |
interrupts = <10 0x8>; |
| 96 |
interrupt-parent = <&ipic>; |
| 97 |
}; |
| 98 |
|
| 99 |
dma@82a8 { |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <1>; |
| 102 |
compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; |
| 103 |
reg = <0x82a8 4>; |
| 104 |
ranges = <0 0x8100 0x1a8>; |
| 105 |
interrupt-parent = <&ipic>; |
| 106 |
interrupts = <71 8>; |
| 107 |
cell-index = <0>; |
| 108 |
dma-channel@0 { |
| 109 |
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| 110 |
reg = <0 0x80>; |
| 111 |
cell-index = <0>; |
| 112 |
interrupt-parent = <&ipic>; |
| 113 |
interrupts = <71 8>; |
| 114 |
}; |
| 115 |
dma-channel@80 { |
| 116 |
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| 117 |
reg = <0x80 0x80>; |
| 118 |
cell-index = <1>; |
| 119 |
interrupt-parent = <&ipic>; |
| 120 |
interrupts = <71 8>; |
| 121 |
}; |
| 122 |
dma-channel@100 { |
| 123 |
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| 124 |
reg = <0x100 0x80>; |
| 125 |
cell-index = <2>; |
| 126 |
interrupt-parent = <&ipic>; |
| 127 |
interrupts = <71 8>; |
| 128 |
}; |
| 129 |
dma-channel@180 { |
| 130 |
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| 131 |
reg = <0x180 0x28>; |
| 132 |
cell-index = <3>; |
| 133 |
interrupt-parent = <&ipic>; |
| 134 |
interrupts = <71 8>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
crypto@30000 { |
| 139 |
compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; |
| 140 |
reg = <0x30000 0x10000>; |
| 141 |
interrupts = <11 0x8>; |
| 142 |
interrupt-parent = <&ipic>; |
| 143 |
fsl,num-channels = <1>; |
| 144 |
fsl,channel-fifo-len = <24>; |
| 145 |
fsl,exec-units-mask = <0x4c>; |
| 146 |
fsl,descriptor-types-mask = <0x0122003f>; |
| 147 |
sleep = <&pmc 0x03000000>; |
| 148 |
}; |
| 149 |
|
| 150 |
ipic:pic@700 { |
| 151 |
interrupt-controller; |
| 152 |
#address-cells = <0>; |
| 153 |
#interrupt-cells = <2>; |
| 154 |
reg = <0x700 0x100>; |
| 155 |
device_type = "ipic"; |
| 156 |
}; |
| 157 |
|
| 158 |
par_io@1400 { |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <1>; |
| 161 |
reg = <0x1400 0x100>; |
| 162 |
ranges = <3 0x1448 0x18>; |
| 163 |
compatible = "fsl,mpc8323-qe-pario"; |
| 164 |
device_type = "par_io"; |
| 165 |
num-ports = <7>; |
| 166 |
|
| 167 |
qe_pio_d: gpio-controller@1448 { |
| 168 |
#gpio-cells = <2>; |
| 169 |
compatible = "fsl,mpc8323-qe-pario-bank"; |
| 170 |
reg = <3 0x18>; |
| 171 |
gpio-controller; |
| 172 |
}; |
| 173 |
|
| 174 |
ucc2pio:ucc_pin@2 { |
| 175 |
pio-map = < |
| 176 |
/* port pin dir open_drain assignment has_irq */ |
| 177 |
3 4 3 0 2 0 /* MDIO */ |
| 178 |
3 5 1 0 2 0 /* MDC */ |
| 179 |
3 21 2 0 1 0 /* RX_CLK (CLK16) */ |
| 180 |
3 23 2 0 1 0 /* TX_CLK (CLK3) */ |
| 181 |
0 18 1 0 1 0 /* TxD0 */ |
| 182 |
0 19 1 0 1 0 /* TxD1 */ |
| 183 |
0 20 1 0 1 0 /* TxD2 */ |
| 184 |
0 21 1 0 1 0 /* TxD3 */ |
| 185 |
0 22 2 0 1 0 /* RxD0 */ |
| 186 |
0 23 2 0 1 0 /* RxD1 */ |
| 187 |
0 24 2 0 1 0 /* RxD2 */ |
| 188 |
0 25 2 0 1 0 /* RxD3 */ |
| 189 |
0 26 2 0 1 0 /* RX_ER */ |
| 190 |
0 27 1 0 1 0 /* TX_ER */ |
| 191 |
0 28 2 0 1 0 /* RX_DV */ |
| 192 |
0 29 2 0 1 0 /* COL */ |
| 193 |
0 30 1 0 1 0 /* TX_EN */ |
| 194 |
0 31 2 0 1 0>; /* CRS */ |
| 195 |
}; |
| 196 |
ucc3pio:ucc_pin@3 { |
| 197 |
pio-map = < |
| 198 |
/* port pin dir open_drain assignment has_irq */ |
| 199 |
0 13 2 0 1 0 /* RX_CLK (CLK9) */ |
| 200 |
3 24 2 0 1 0 /* TX_CLK (CLK10) */ |
| 201 |
1 0 1 0 1 0 /* TxD0 */ |
| 202 |
1 1 1 0 1 0 /* TxD1 */ |
| 203 |
1 2 1 0 1 0 /* TxD2 */ |
| 204 |
1 3 1 0 1 0 /* TxD3 */ |
| 205 |
1 4 2 0 1 0 /* RxD0 */ |
| 206 |
1 5 2 0 1 0 /* RxD1 */ |
| 207 |
1 6 2 0 1 0 /* RxD2 */ |
| 208 |
1 7 2 0 1 0 /* RxD3 */ |
| 209 |
1 8 2 0 1 0 /* RX_ER */ |
| 210 |
1 9 1 0 1 0 /* TX_ER */ |
| 211 |
1 10 2 0 1 0 /* RX_DV */ |
| 212 |
1 11 2 0 1 0 /* COL */ |
| 213 |
1 12 1 0 1 0 /* TX_EN */ |
| 214 |
1 13 2 0 1 0>; /* CRS */ |
| 215 |
}; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
qe@e0100000 { |
| 220 |
#address-cells = <1>; |
| 221 |
#size-cells = <1>; |
| 222 |
device_type = "qe"; |
| 223 |
compatible = "fsl,qe"; |
| 224 |
ranges = <0x0 0xe0100000 0x00100000>; |
| 225 |
reg = <0xe0100000 0x480>; |
| 226 |
brg-frequency = <0>; |
| 227 |
bus-frequency = <198000000>; |
| 228 |
fsl,qe-num-riscs = <1>; |
| 229 |
fsl,qe-num-snums = <28>; |
| 230 |
|
| 231 |
muram@10000 { |
| 232 |
#address-cells = <1>; |
| 233 |
#size-cells = <1>; |
| 234 |
compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| 235 |
ranges = <0x0 0x00010000 0x00004000>; |
| 236 |
|
| 237 |
data-only@0 { |
| 238 |
compatible = "fsl,qe-muram-data", |
| 239 |
"fsl,cpm-muram-data"; |
| 240 |
reg = <0x0 0x4000>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
spi@4c0 { |
| 245 |
#address-cells = <1>; |
| 246 |
#size-cells = <0>; |
| 247 |
cell-index = <0>; |
| 248 |
compatible = "fsl,spi"; |
| 249 |
reg = <0x4c0 0x40>; |
| 250 |
interrupts = <2>; |
| 251 |
interrupt-parent = <&qeic>; |
| 252 |
cs-gpios = <&qe_pio_d 13 0>; |
| 253 |
mode = "cpu-qe"; |
| 254 |
|
| 255 |
mmc-slot@0 { |
| 256 |
compatible = "fsl,mpc8323rdb-mmc-slot", |
| 257 |
"mmc-spi-slot"; |
| 258 |
reg = <0>; |
| 259 |
gpios = <&qe_pio_d 14 1 |
| 260 |
&qe_pio_d 15 0>; |
| 261 |
voltage-ranges = <3300 3300>; |
| 262 |
spi-max-frequency = <50000000>; |
| 263 |
}; |
| 264 |
}; |
| 265 |
|
| 266 |
spi@500 { |
| 267 |
cell-index = <1>; |
| 268 |
compatible = "fsl,spi"; |
| 269 |
reg = <0x500 0x40>; |
| 270 |
interrupts = <1>; |
| 271 |
interrupt-parent = <&qeic>; |
| 272 |
mode = "cpu"; |
| 273 |
}; |
| 274 |
|
| 275 |
enet0: ucc@3000 { |
| 276 |
device_type = "network"; |
| 277 |
compatible = "ucc_geth"; |
| 278 |
cell-index = <2>; |
| 279 |
reg = <0x3000 0x200>; |
| 280 |
interrupts = <33>; |
| 281 |
interrupt-parent = <&qeic>; |
| 282 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 283 |
rx-clock-name = "clk16"; |
| 284 |
tx-clock-name = "clk3"; |
| 285 |
phy-handle = <&phy00>; |
| 286 |
pio-handle = <&ucc2pio>; |
| 287 |
}; |
| 288 |
|
| 289 |
enet1: ucc@2200 { |
| 290 |
device_type = "network"; |
| 291 |
compatible = "ucc_geth"; |
| 292 |
cell-index = <3>; |
| 293 |
reg = <0x2200 0x200>; |
| 294 |
interrupts = <34>; |
| 295 |
interrupt-parent = <&qeic>; |
| 296 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 297 |
rx-clock-name = "clk9"; |
| 298 |
tx-clock-name = "clk10"; |
| 299 |
phy-handle = <&phy04>; |
| 300 |
pio-handle = <&ucc3pio>; |
| 301 |
}; |
| 302 |
|
| 303 |
mdio@3120 { |
| 304 |
#address-cells = <1>; |
| 305 |
#size-cells = <0>; |
| 306 |
reg = <0x3120 0x18>; |
| 307 |
compatible = "fsl,ucc-mdio"; |
| 308 |
|
| 309 |
phy00:ethernet-phy@0 { |
| 310 |
reg = <0x0>; |
| 311 |
}; |
| 312 |
phy04:ethernet-phy@4 { |
| 313 |
reg = <0x4>; |
| 314 |
}; |
| 315 |
}; |
| 316 |
|
| 317 |
qeic:interrupt-controller@80 { |
| 318 |
interrupt-controller; |
| 319 |
compatible = "fsl,qe-ic"; |
| 320 |
#address-cells = <0>; |
| 321 |
#interrupt-cells = <1>; |
| 322 |
reg = <0x80 0x80>; |
| 323 |
big-endian; |
| 324 |
interrupts = <32 0x8 33 0x8>; //high:32 low:33 |
| 325 |
interrupt-parent = <&ipic>; |
| 326 |
}; |
| 327 |
}; |
| 328 |
|
| 329 |
pci0: pci@e0008500 { |
| 330 |
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 331 |
interrupt-map = < |
| 332 |
/* IDSEL 0x10 AD16 (USB) */ |
| 333 |
0x8000 0x0 0x0 0x1 &ipic 17 0x8 |
| 334 |
|
| 335 |
/* IDSEL 0x11 AD17 (Mini1)*/ |
| 336 |
0x8800 0x0 0x0 0x1 &ipic 18 0x8 |
| 337 |
0x8800 0x0 0x0 0x2 &ipic 19 0x8 |
| 338 |
0x8800 0x0 0x0 0x3 &ipic 20 0x8 |
| 339 |
0x8800 0x0 0x0 0x4 &ipic 48 0x8 |
| 340 |
|
| 341 |
/* IDSEL 0x12 AD18 (PCI/Mini2) */ |
| 342 |
0x9000 0x0 0x0 0x1 &ipic 19 0x8 |
| 343 |
0x9000 0x0 0x0 0x2 &ipic 20 0x8 |
| 344 |
0x9000 0x0 0x0 0x3 &ipic 48 0x8 |
| 345 |
0x9000 0x0 0x0 0x4 &ipic 17 0x8>; |
| 346 |
|
| 347 |
interrupt-parent = <&ipic>; |
| 348 |
interrupts = <66 0x8>; |
| 349 |
bus-range = <0x0 0x0>; |
| 350 |
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 351 |
0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 352 |
0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>; |
| 353 |
clock-frequency = <0>; |
| 354 |
#interrupt-cells = <1>; |
| 355 |
#size-cells = <2>; |
| 356 |
#address-cells = <3>; |
| 357 |
reg = <0xe0008500 0x100 /* internal registers */ |
| 358 |
0xe0008300 0x8>; /* config space access registers */ |
| 359 |
compatible = "fsl,mpc8349-pci"; |
| 360 |
device_type = "pci"; |
| 361 |
sleep = <&pmc 0x00010000>; |
| 362 |
}; |
| 363 |
}; |