| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* MPC8313E RDB Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "MPC8313ERDB"; |
| 13 |
compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <1>; |
| 16 |
|
| 17 |
aliases { |
| 18 |
ethernet0 = &enet0; |
| 19 |
ethernet1 = &enet1; |
| 20 |
serial0 = &serial0; |
| 21 |
serial1 = &serial1; |
| 22 |
pci0 = &pci0; |
| 23 |
}; |
| 24 |
|
| 25 |
cpus { |
| 26 |
#address-cells = <1>; |
| 27 |
#size-cells = <0>; |
| 28 |
|
| 29 |
PowerPC,8313@0 { |
| 30 |
device_type = "cpu"; |
| 31 |
reg = <0x0>; |
| 32 |
d-cache-line-size = <32>; |
| 33 |
i-cache-line-size = <32>; |
| 34 |
d-cache-size = <16384>; |
| 35 |
i-cache-size = <16384>; |
| 36 |
timebase-frequency = <0>; // from bootloader |
| 37 |
bus-frequency = <0>; // from bootloader |
| 38 |
clock-frequency = <0>; // from bootloader |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
memory@0 { |
| 43 |
device_type = "memory"; |
| 44 |
reg = <0x00000000 0x08000000>; // 128MB at 0 |
| 45 |
}; |
| 46 |
|
| 47 |
localbus@e0005000 { |
| 48 |
#address-cells = <2>; |
| 49 |
#size-cells = <1>; |
| 50 |
compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; |
| 51 |
reg = <0xe0005000 0x1000>; |
| 52 |
interrupts = <77 IRQ_TYPE_LEVEL_LOW>; |
| 53 |
interrupt-parent = <&ipic>; |
| 54 |
|
| 55 |
// CS0 and CS1 are swapped when |
| 56 |
// booting from nand, but the |
| 57 |
// addresses are the same. |
| 58 |
ranges = <0x0 0x0 0xfe000000 0x00800000 |
| 59 |
0x1 0x0 0xe2800000 0x00008000 |
| 60 |
0x2 0x0 0xf0000000 0x00020000 |
| 61 |
0x3 0x0 0xfa000000 0x00008000>; |
| 62 |
|
| 63 |
flash@0,0 { |
| 64 |
#address-cells = <1>; |
| 65 |
#size-cells = <1>; |
| 66 |
compatible = "cfi-flash"; |
| 67 |
reg = <0x0 0x0 0x800000>; |
| 68 |
bank-width = <2>; |
| 69 |
device-width = <1>; |
| 70 |
}; |
| 71 |
|
| 72 |
nand@1,0 { |
| 73 |
#address-cells = <1>; |
| 74 |
#size-cells = <1>; |
| 75 |
compatible = "fsl,mpc8313-fcm-nand", |
| 76 |
"fsl,elbc-fcm-nand"; |
| 77 |
reg = <0x1 0x0 0x2000>; |
| 78 |
|
| 79 |
u-boot@0 { |
| 80 |
reg = <0x0 0x100000>; |
| 81 |
read-only; |
| 82 |
}; |
| 83 |
|
| 84 |
kernel@100000 { |
| 85 |
reg = <0x100000 0x300000>; |
| 86 |
}; |
| 87 |
|
| 88 |
fs@400000 { |
| 89 |
reg = <0x400000 0x1c00000>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
soc8313@e0000000 { |
| 95 |
#address-cells = <1>; |
| 96 |
#size-cells = <1>; |
| 97 |
device_type = "soc"; |
| 98 |
compatible = "simple-bus"; |
| 99 |
ranges = <0x0 0xe0000000 0x00100000>; |
| 100 |
reg = <0xe0000000 0x00000200>; |
| 101 |
bus-frequency = <0>; |
| 102 |
|
| 103 |
watchdog@200 { |
| 104 |
device_type = "watchdog"; |
| 105 |
compatible = "mpc83xx_wdt"; |
| 106 |
reg = <0x200 0x100>; |
| 107 |
}; |
| 108 |
|
| 109 |
sleep-nexus { |
| 110 |
#address-cells = <1>; |
| 111 |
#size-cells = <1>; |
| 112 |
compatible = "simple-bus"; |
| 113 |
sleep = <&pmc 0x03000000>; |
| 114 |
ranges; |
| 115 |
|
| 116 |
i2c@3000 { |
| 117 |
#address-cells = <1>; |
| 118 |
#size-cells = <0>; |
| 119 |
cell-index = <0>; |
| 120 |
compatible = "fsl-i2c"; |
| 121 |
reg = <0x3000 0x100>; |
| 122 |
interrupts = <14 IRQ_TYPE_LEVEL_LOW>; |
| 123 |
interrupt-parent = <&ipic>; |
| 124 |
dfsrr; |
| 125 |
rtc@68 { |
| 126 |
compatible = "dallas,ds1339"; |
| 127 |
reg = <0x68>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
crypto@30000 { |
| 132 |
compatible = "fsl,sec2.2", "fsl,sec2.1", |
| 133 |
"fsl,sec2.0"; |
| 134 |
reg = <0x30000 0x10000>; |
| 135 |
interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
| 136 |
interrupt-parent = <&ipic>; |
| 137 |
fsl,num-channels = <1>; |
| 138 |
fsl,channel-fifo-len = <24>; |
| 139 |
fsl,exec-units-mask = <0x4c>; |
| 140 |
fsl,descriptor-types-mask = <0x0122003f>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
i2c@3100 { |
| 145 |
#address-cells = <1>; |
| 146 |
#size-cells = <0>; |
| 147 |
cell-index = <1>; |
| 148 |
compatible = "fsl-i2c"; |
| 149 |
reg = <0x3100 0x100>; |
| 150 |
interrupts = <15 IRQ_TYPE_LEVEL_LOW>; |
| 151 |
interrupt-parent = <&ipic>; |
| 152 |
dfsrr; |
| 153 |
}; |
| 154 |
|
| 155 |
spi@7000 { |
| 156 |
cell-index = <0>; |
| 157 |
compatible = "fsl,spi"; |
| 158 |
reg = <0x7000 0x1000>; |
| 159 |
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
| 160 |
interrupt-parent = <&ipic>; |
| 161 |
mode = "cpu"; |
| 162 |
}; |
| 163 |
|
| 164 |
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ |
| 165 |
usb@23000 { |
| 166 |
compatible = "fsl-usb2-dr"; |
| 167 |
reg = <0x23000 0x1000>; |
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <0>; |
| 170 |
interrupt-parent = <&ipic>; |
| 171 |
interrupts = <38 IRQ_TYPE_LEVEL_LOW>; |
| 172 |
phy_type = "utmi_wide"; |
| 173 |
sleep = <&pmc 0x00300000>; |
| 174 |
}; |
| 175 |
|
| 176 |
ptp_clock@24E00 { |
| 177 |
compatible = "fsl,etsec-ptp"; |
| 178 |
reg = <0x24E00 0xB0>; |
| 179 |
interrupts = <12 IRQ_TYPE_LEVEL_LOW>, |
| 180 |
<13 IRQ_TYPE_LEVEL_LOW>; |
| 181 |
interrupt-parent = < &ipic >; |
| 182 |
fsl,tclk-period = <10>; |
| 183 |
fsl,tmr-prsc = <100>; |
| 184 |
fsl,tmr-add = <0x999999A4>; |
| 185 |
fsl,tmr-fiper1 = <0x3B9AC9F6>; |
| 186 |
fsl,tmr-fiper2 = <0x00018696>; |
| 187 |
fsl,max-adj = <659999998>; |
| 188 |
}; |
| 189 |
|
| 190 |
enet0: ethernet@24000 { |
| 191 |
#address-cells = <1>; |
| 192 |
#size-cells = <1>; |
| 193 |
sleep = <&pmc 0x20000000>; |
| 194 |
ranges = <0x0 0x24000 0x1000>; |
| 195 |
|
| 196 |
cell-index = <0>; |
| 197 |
device_type = "network"; |
| 198 |
model = "eTSEC"; |
| 199 |
compatible = "gianfar"; |
| 200 |
reg = <0x24000 0x1000>; |
| 201 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 202 |
interrupts = <37 IRQ_TYPE_LEVEL_LOW>, |
| 203 |
<36 IRQ_TYPE_LEVEL_LOW>, |
| 204 |
<35 IRQ_TYPE_LEVEL_LOW>; |
| 205 |
interrupt-parent = <&ipic>; |
| 206 |
tbi-handle = < &tbi0 >; |
| 207 |
/* Vitesse 7385 isn't on the MDIO bus */ |
| 208 |
fixed-link = <1 1 1000 0 0>; |
| 209 |
fsl,magic-packet; |
| 210 |
|
| 211 |
mdio@520 { |
| 212 |
#address-cells = <1>; |
| 213 |
#size-cells = <0>; |
| 214 |
compatible = "fsl,gianfar-mdio"; |
| 215 |
reg = <0x520 0x20>; |
| 216 |
phy4: ethernet-phy@4 { |
| 217 |
interrupt-parent = <&ipic>; |
| 218 |
interrupts = <20 IRQ_TYPE_LEVEL_LOW>; |
| 219 |
reg = <0x4>; |
| 220 |
}; |
| 221 |
tbi0: tbi-phy@11 { |
| 222 |
reg = <0x11>; |
| 223 |
device_type = "tbi-phy"; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
enet1: ethernet@25000 { |
| 229 |
#address-cells = <1>; |
| 230 |
#size-cells = <1>; |
| 231 |
cell-index = <1>; |
| 232 |
device_type = "network"; |
| 233 |
model = "eTSEC"; |
| 234 |
compatible = "gianfar"; |
| 235 |
reg = <0x25000 0x1000>; |
| 236 |
ranges = <0x0 0x25000 0x1000>; |
| 237 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 238 |
interrupts = <34 IRQ_TYPE_LEVEL_LOW>, |
| 239 |
<33 IRQ_TYPE_LEVEL_LOW>, |
| 240 |
<32 IRQ_TYPE_LEVEL_LOW>; |
| 241 |
interrupt-parent = <&ipic>; |
| 242 |
tbi-handle = < &tbi1 >; |
| 243 |
phy-handle = < &phy4 >; |
| 244 |
sleep = <&pmc 0x10000000>; |
| 245 |
fsl,magic-packet; |
| 246 |
|
| 247 |
mdio@520 { |
| 248 |
#address-cells = <1>; |
| 249 |
#size-cells = <0>; |
| 250 |
compatible = "fsl,gianfar-tbi"; |
| 251 |
reg = <0x520 0x20>; |
| 252 |
|
| 253 |
tbi1: tbi-phy@11 { |
| 254 |
reg = <0x11>; |
| 255 |
device_type = "tbi-phy"; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
|
| 260 |
}; |
| 261 |
|
| 262 |
serial0: serial@4500 { |
| 263 |
cell-index = <0>; |
| 264 |
device_type = "serial"; |
| 265 |
compatible = "fsl,ns16550", "ns16550"; |
| 266 |
reg = <0x4500 0x100>; |
| 267 |
clock-frequency = <0>; |
| 268 |
interrupts = <9 IRQ_TYPE_LEVEL_LOW>; |
| 269 |
interrupt-parent = <&ipic>; |
| 270 |
}; |
| 271 |
|
| 272 |
serial1: serial@4600 { |
| 273 |
cell-index = <1>; |
| 274 |
device_type = "serial"; |
| 275 |
compatible = "fsl,ns16550", "ns16550"; |
| 276 |
reg = <0x4600 0x100>; |
| 277 |
clock-frequency = <0>; |
| 278 |
interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| 279 |
interrupt-parent = <&ipic>; |
| 280 |
}; |
| 281 |
|
| 282 |
/* IPIC |
| 283 |
* interrupts cell = <intr #, type> |
| 284 |
*/ |
| 285 |
ipic: pic@700 { |
| 286 |
interrupt-controller; |
| 287 |
#address-cells = <0>; |
| 288 |
#interrupt-cells = <2>; |
| 289 |
reg = <0x700 0x100>; |
| 290 |
device_type = "ipic"; |
| 291 |
}; |
| 292 |
|
| 293 |
pmc: power@b00 { |
| 294 |
compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; |
| 295 |
reg = <0xb00 0x100 0xa00 0x100>; |
| 296 |
interrupts = <80 IRQ_TYPE_LEVEL_LOW>; |
| 297 |
interrupt-parent = <&ipic>; |
| 298 |
fsl,mpc8313-wakeup-timer = <>m1>; |
| 299 |
|
| 300 |
/* Remove this (or change to "okay") if you have |
| 301 |
* a REVA3 or later board, if you apply one of the |
| 302 |
* workarounds listed in section 8.5 of the board |
| 303 |
* manual, or if you are adapting this device tree |
| 304 |
* to a different board. |
| 305 |
*/ |
| 306 |
status = "fail"; |
| 307 |
}; |
| 308 |
|
| 309 |
gtm1: timer@500 { |
| 310 |
compatible = "fsl,mpc8313-gtm", "fsl,gtm"; |
| 311 |
reg = <0x500 0x100>; |
| 312 |
interrupts = <90 IRQ_TYPE_LEVEL_LOW>, |
| 313 |
<78 IRQ_TYPE_LEVEL_LOW>, |
| 314 |
<84 IRQ_TYPE_LEVEL_LOW>, |
| 315 |
<72 IRQ_TYPE_LEVEL_LOW>; |
| 316 |
interrupt-parent = <&ipic>; |
| 317 |
}; |
| 318 |
|
| 319 |
timer@600 { |
| 320 |
compatible = "fsl,mpc8313-gtm", "fsl,gtm"; |
| 321 |
reg = <0x600 0x100>; |
| 322 |
interrupts = <91 IRQ_TYPE_LEVEL_LOW>, |
| 323 |
<79 IRQ_TYPE_LEVEL_LOW>, |
| 324 |
<85 IRQ_TYPE_LEVEL_LOW>, |
| 325 |
<73 IRQ_TYPE_LEVEL_LOW>; |
| 326 |
interrupt-parent = <&ipic>; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
sleep-nexus { |
| 331 |
#address-cells = <1>; |
| 332 |
#size-cells = <1>; |
| 333 |
compatible = "simple-bus"; |
| 334 |
sleep = <&pmc 0x00010000>; |
| 335 |
ranges; |
| 336 |
|
| 337 |
pci0: pci@e0008500 { |
| 338 |
cell-index = <1>; |
| 339 |
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 340 |
interrupt-map = < |
| 341 |
/* IDSEL 0x0E -mini PCI */ |
| 342 |
0x7000 0x0 0x0 0x1 &ipic 18 0x8 |
| 343 |
0x7000 0x0 0x0 0x2 &ipic 18 0x8 |
| 344 |
0x7000 0x0 0x0 0x3 &ipic 18 0x8 |
| 345 |
0x7000 0x0 0x0 0x4 &ipic 18 0x8 |
| 346 |
|
| 347 |
/* IDSEL 0x0F - PCI slot */ |
| 348 |
0x7800 0x0 0x0 0x1 &ipic 17 0x8 |
| 349 |
0x7800 0x0 0x0 0x2 &ipic 18 0x8 |
| 350 |
0x7800 0x0 0x0 0x3 &ipic 17 0x8 |
| 351 |
0x7800 0x0 0x0 0x4 &ipic 18 0x8>; |
| 352 |
interrupt-parent = <&ipic>; |
| 353 |
interrupts = <66 IRQ_TYPE_LEVEL_LOW>; |
| 354 |
bus-range = <0x0 0x0>; |
| 355 |
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 356 |
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 357 |
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; |
| 358 |
clock-frequency = <66666666>; |
| 359 |
#interrupt-cells = <1>; |
| 360 |
#size-cells = <2>; |
| 361 |
#address-cells = <3>; |
| 362 |
reg = <0xe0008500 0x100 /* internal registers */ |
| 363 |
0xe0008300 0x8>; /* config space access registers */ |
| 364 |
compatible = "fsl,mpc8349-pci"; |
| 365 |
device_type = "pci"; |
| 366 |
}; |
| 367 |
|
| 368 |
dma@82a8 { |
| 369 |
#address-cells = <1>; |
| 370 |
#size-cells = <1>; |
| 371 |
compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; |
| 372 |
reg = <0xe00082a8 4>; |
| 373 |
ranges = <0 0xe0008100 0x1a8>; |
| 374 |
interrupt-parent = <&ipic>; |
| 375 |
interrupts = <71 IRQ_TYPE_LEVEL_LOW>; |
| 376 |
|
| 377 |
dma-channel@0 { |
| 378 |
compatible = "fsl,mpc8313-dma-channel", |
| 379 |
"fsl,elo-dma-channel"; |
| 380 |
reg = <0 0x28>; |
| 381 |
interrupt-parent = <&ipic>; |
| 382 |
interrupts = <71 IRQ_TYPE_LEVEL_LOW>; |
| 383 |
cell-index = <0>; |
| 384 |
}; |
| 385 |
|
| 386 |
dma-channel@80 { |
| 387 |
compatible = "fsl,mpc8313-dma-channel", |
| 388 |
"fsl,elo-dma-channel"; |
| 389 |
reg = <0x80 0x28>; |
| 390 |
interrupt-parent = <&ipic>; |
| 391 |
interrupts = <71 IRQ_TYPE_LEVEL_LOW>; |
| 392 |
cell-index = <1>; |
| 393 |
}; |
| 394 |
|
| 395 |
dma-channel@100 { |
| 396 |
compatible = "fsl,mpc8313-dma-channel", |
| 397 |
"fsl,elo-dma-channel"; |
| 398 |
reg = <0x100 0x28>; |
| 399 |
interrupt-parent = <&ipic>; |
| 400 |
interrupts = <71 IRQ_TYPE_LEVEL_LOW>; |
| 401 |
cell-index = <2>; |
| 402 |
}; |
| 403 |
|
| 404 |
dma-channel@180 { |
| 405 |
compatible = "fsl,mpc8313-dma-channel", |
| 406 |
"fsl,elo-dma-channel"; |
| 407 |
reg = <0x180 0x28>; |
| 408 |
interrupt-parent = <&ipic>; |
| 409 |
interrupts = <71 IRQ_TYPE_LEVEL_LOW>; |
| 410 |
cell-index = <3>; |
| 411 |
}; |
| 412 |
}; |
| 413 |
}; |
| 414 |
}; |