| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* MPC8308RDB Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2009 Freescale Semiconductor Inc. |
| 6 |
* Copyright 2010 Ilya Yanok, Emcraft Systems, [email protected] |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "fsl,mpc8308rdb"; |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
|
| 16 |
aliases { |
| 17 |
ethernet0 = &enet0; |
| 18 |
ethernet1 = &enet1; |
| 19 |
serial0 = &serial0; |
| 20 |
serial1 = &serial1; |
| 21 |
pci0 = &pci0; |
| 22 |
}; |
| 23 |
|
| 24 |
cpus { |
| 25 |
#address-cells = <1>; |
| 26 |
#size-cells = <0>; |
| 27 |
|
| 28 |
PowerPC,8308@0 { |
| 29 |
device_type = "cpu"; |
| 30 |
reg = <0x0>; |
| 31 |
d-cache-line-size = <32>; |
| 32 |
i-cache-line-size = <32>; |
| 33 |
d-cache-size = <16384>; |
| 34 |
i-cache-size = <16384>; |
| 35 |
timebase-frequency = <0>; // from bootloader |
| 36 |
bus-frequency = <0>; // from bootloader |
| 37 |
clock-frequency = <0>; // from bootloader |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
memory@0 { |
| 42 |
device_type = "memory"; |
| 43 |
reg = <0x00000000 0x08000000>; // 128MB at 0 |
| 44 |
}; |
| 45 |
|
| 46 |
localbus@e0005000 { |
| 47 |
#address-cells = <2>; |
| 48 |
#size-cells = <1>; |
| 49 |
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; |
| 50 |
reg = <0xe0005000 0x1000>; |
| 51 |
interrupts = <77 0x8>; |
| 52 |
interrupt-parent = <&ipic>; |
| 53 |
|
| 54 |
// CS0 and CS1 are swapped when |
| 55 |
// booting from nand, but the |
| 56 |
// addresses are the same. |
| 57 |
ranges = <0x0 0x0 0xfe000000 0x00800000 |
| 58 |
0x1 0x0 0xe0600000 0x00002000 |
| 59 |
0x2 0x0 0xf0000000 0x00020000 |
| 60 |
0x3 0x0 0xfa000000 0x00008000>; |
| 61 |
|
| 62 |
flash@0,0 { |
| 63 |
#address-cells = <1>; |
| 64 |
#size-cells = <1>; |
| 65 |
compatible = "cfi-flash"; |
| 66 |
reg = <0x0 0x0 0x800000>; |
| 67 |
bank-width = <2>; |
| 68 |
device-width = <1>; |
| 69 |
|
| 70 |
u-boot@0 { |
| 71 |
reg = <0x0 0x60000>; |
| 72 |
read-only; |
| 73 |
}; |
| 74 |
env@60000 { |
| 75 |
reg = <0x60000 0x10000>; |
| 76 |
}; |
| 77 |
env1@70000 { |
| 78 |
reg = <0x70000 0x10000>; |
| 79 |
}; |
| 80 |
kernel@80000 { |
| 81 |
reg = <0x80000 0x200000>; |
| 82 |
}; |
| 83 |
dtb@280000 { |
| 84 |
reg = <0x280000 0x10000>; |
| 85 |
}; |
| 86 |
ramdisk@290000 { |
| 87 |
reg = <0x290000 0x570000>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
nand@1,0 { |
| 92 |
#address-cells = <1>; |
| 93 |
#size-cells = <1>; |
| 94 |
compatible = "fsl,mpc8315-fcm-nand", |
| 95 |
"fsl,elbc-fcm-nand"; |
| 96 |
reg = <0x1 0x0 0x2000>; |
| 97 |
|
| 98 |
jffs2@0 { |
| 99 |
reg = <0x0 0x2000000>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
immr@e0000000 { |
| 105 |
#address-cells = <1>; |
| 106 |
#size-cells = <1>; |
| 107 |
device_type = "soc"; |
| 108 |
compatible = "fsl,mpc8308-immr", "simple-bus"; |
| 109 |
ranges = <0 0xe0000000 0x00100000>; |
| 110 |
reg = <0xe0000000 0x00000200>; |
| 111 |
bus-frequency = <0>; |
| 112 |
|
| 113 |
i2c@3000 { |
| 114 |
#address-cells = <1>; |
| 115 |
#size-cells = <0>; |
| 116 |
cell-index = <0>; |
| 117 |
compatible = "fsl-i2c"; |
| 118 |
reg = <0x3000 0x100>; |
| 119 |
interrupts = <14 0x8>; |
| 120 |
interrupt-parent = <&ipic>; |
| 121 |
dfsrr; |
| 122 |
rtc@68 { |
| 123 |
compatible = "dallas,ds1339"; |
| 124 |
reg = <0x68>; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
usb@23000 { |
| 129 |
compatible = "fsl-usb2-dr"; |
| 130 |
reg = <0x23000 0x1000>; |
| 131 |
#address-cells = <1>; |
| 132 |
#size-cells = <0>; |
| 133 |
interrupt-parent = <&ipic>; |
| 134 |
interrupts = <38 0x8>; |
| 135 |
dr_mode = "peripheral"; |
| 136 |
phy_type = "ulpi"; |
| 137 |
}; |
| 138 |
|
| 139 |
enet0: ethernet@24000 { |
| 140 |
#address-cells = <1>; |
| 141 |
#size-cells = <1>; |
| 142 |
ranges = <0x0 0x24000 0x1000>; |
| 143 |
|
| 144 |
cell-index = <0>; |
| 145 |
device_type = "network"; |
| 146 |
model = "eTSEC"; |
| 147 |
compatible = "gianfar"; |
| 148 |
reg = <0x24000 0x1000>; |
| 149 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 150 |
interrupts = <32 0x8 33 0x8 34 0x8>; |
| 151 |
interrupt-parent = <&ipic>; |
| 152 |
tbi-handle = < &tbi0 >; |
| 153 |
phy-handle = < &phy2 >; |
| 154 |
fsl,magic-packet; |
| 155 |
|
| 156 |
mdio@520 { |
| 157 |
#address-cells = <1>; |
| 158 |
#size-cells = <0>; |
| 159 |
compatible = "fsl,gianfar-mdio"; |
| 160 |
reg = <0x520 0x20>; |
| 161 |
phy2: ethernet-phy@2 { |
| 162 |
interrupt-parent = <&ipic>; |
| 163 |
interrupts = <17 0x8>; |
| 164 |
reg = <0x2>; |
| 165 |
}; |
| 166 |
tbi0: tbi-phy@11 { |
| 167 |
reg = <0x11>; |
| 168 |
device_type = "tbi-phy"; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
enet1: ethernet@25000 { |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <1>; |
| 176 |
cell-index = <1>; |
| 177 |
device_type = "network"; |
| 178 |
model = "eTSEC"; |
| 179 |
compatible = "gianfar"; |
| 180 |
reg = <0x25000 0x1000>; |
| 181 |
ranges = <0x0 0x25000 0x1000>; |
| 182 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 183 |
interrupts = <35 0x8 36 0x8 37 0x8>; |
| 184 |
interrupt-parent = <&ipic>; |
| 185 |
tbi-handle = < &tbi1 >; |
| 186 |
/* Vitesse 7385 isn't on the MDIO bus */ |
| 187 |
fixed-link = <1 1 1000 0 0>; |
| 188 |
fsl,magic-packet; |
| 189 |
|
| 190 |
mdio@520 { |
| 191 |
#address-cells = <1>; |
| 192 |
#size-cells = <0>; |
| 193 |
compatible = "fsl,gianfar-tbi"; |
| 194 |
reg = <0x520 0x20>; |
| 195 |
|
| 196 |
tbi1: tbi-phy@11 { |
| 197 |
reg = <0x11>; |
| 198 |
device_type = "tbi-phy"; |
| 199 |
}; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
serial0: serial@4500 { |
| 204 |
cell-index = <0>; |
| 205 |
device_type = "serial"; |
| 206 |
compatible = "fsl,ns16550", "ns16550"; |
| 207 |
reg = <0x4500 0x100>; |
| 208 |
clock-frequency = <133333333>; |
| 209 |
interrupts = <9 0x8>; |
| 210 |
interrupt-parent = <&ipic>; |
| 211 |
}; |
| 212 |
|
| 213 |
serial1: serial@4600 { |
| 214 |
cell-index = <1>; |
| 215 |
device_type = "serial"; |
| 216 |
compatible = "fsl,ns16550", "ns16550"; |
| 217 |
reg = <0x4600 0x100>; |
| 218 |
clock-frequency = <133333333>; |
| 219 |
interrupts = <10 0x8>; |
| 220 |
interrupt-parent = <&ipic>; |
| 221 |
}; |
| 222 |
|
| 223 |
gpio@c00 { |
| 224 |
#gpio-cells = <2>; |
| 225 |
device_type = "gpio"; |
| 226 |
compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; |
| 227 |
reg = <0xc00 0x18>; |
| 228 |
interrupts = <74 0x8>; |
| 229 |
interrupt-parent = <&ipic>; |
| 230 |
gpio-controller; |
| 231 |
}; |
| 232 |
|
| 233 |
/* IPIC |
| 234 |
* interrupts cell = <intr #, sense> |
| 235 |
* sense values match linux IORESOURCE_IRQ_* defines: |
| 236 |
* sense == 8: Level, low assertion |
| 237 |
* sense == 2: Edge, high-to-low change |
| 238 |
*/ |
| 239 |
ipic: interrupt-controller@700 { |
| 240 |
compatible = "fsl,ipic"; |
| 241 |
interrupt-controller; |
| 242 |
#address-cells = <0>; |
| 243 |
#interrupt-cells = <2>; |
| 244 |
reg = <0x700 0x100>; |
| 245 |
device_type = "ipic"; |
| 246 |
}; |
| 247 |
|
| 248 |
ipic-msi@7c0 { |
| 249 |
compatible = "fsl,ipic-msi"; |
| 250 |
reg = <0x7c0 0x40>; |
| 251 |
msi-available-ranges = <0x0 0x100>; |
| 252 |
interrupts = < 0x43 0x8 |
| 253 |
0x4 0x8 |
| 254 |
0x51 0x8 |
| 255 |
0x52 0x8 |
| 256 |
0x56 0x8 |
| 257 |
0x57 0x8 |
| 258 |
0x58 0x8 |
| 259 |
0x59 0x8 >; |
| 260 |
interrupt-parent = < &ipic >; |
| 261 |
}; |
| 262 |
|
| 263 |
dma@2c000 { |
| 264 |
compatible = "fsl,mpc8308-dma"; |
| 265 |
reg = <0x2c000 0x1800>; |
| 266 |
interrupts = <3 0x8 |
| 267 |
94 0x8>; |
| 268 |
interrupt-parent = < &ipic >; |
| 269 |
}; |
| 270 |
|
| 271 |
}; |
| 272 |
|
| 273 |
pci0: pcie@e0009000 { |
| 274 |
#address-cells = <3>; |
| 275 |
#size-cells = <2>; |
| 276 |
#interrupt-cells = <1>; |
| 277 |
device_type = "pci"; |
| 278 |
compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; |
| 279 |
reg = <0xe0009000 0x00001000 |
| 280 |
0xb0000000 0x01000000>; |
| 281 |
ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 |
| 282 |
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; |
| 283 |
bus-range = <0 0>; |
| 284 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 285 |
interrupt-map = <0 0 0 1 &ipic 1 8 |
| 286 |
0 0 0 2 &ipic 1 8 |
| 287 |
0 0 0 3 &ipic 1 8 |
| 288 |
0 0 0 4 &ipic 1 8>; |
| 289 |
interrupts = <0x1 0x8>; |
| 290 |
interrupt-parent = <&ipic>; |
| 291 |
clock-frequency = <0>; |
| 292 |
|
| 293 |
pcie@0 { |
| 294 |
#address-cells = <3>; |
| 295 |
#size-cells = <2>; |
| 296 |
device_type = "pci"; |
| 297 |
reg = <0 0 0 0 0>; |
| 298 |
ranges = <0x02000000 0 0xa0000000 |
| 299 |
0x02000000 0 0xa0000000 |
| 300 |
0 0x10000000 |
| 301 |
0x01000000 0 0x00000000 |
| 302 |
0x01000000 0 0x00000000 |
| 303 |
0 0x00800000>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
}; |