| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* base MPC5200b Device Tree Source |
| 4 |
* |
| 5 |
* Copyright (C) 2010 SecretLab |
| 6 |
* Grant Likely <[email protected]> |
| 7 |
* John Bonesio <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "fsl,mpc5200b"; |
| 14 |
compatible = "fsl,mpc5200b"; |
| 15 |
#address-cells = <1>; |
| 16 |
#size-cells = <1>; |
| 17 |
interrupt-parent = <&mpc5200_pic>; |
| 18 |
|
| 19 |
cpus { |
| 20 |
#address-cells = <1>; |
| 21 |
#size-cells = <0>; |
| 22 |
|
| 23 |
powerpc: PowerPC,5200@0 { |
| 24 |
device_type = "cpu"; |
| 25 |
reg = <0>; |
| 26 |
d-cache-line-size = <32>; |
| 27 |
i-cache-line-size = <32>; |
| 28 |
d-cache-size = <0x4000>; // L1, 16K |
| 29 |
i-cache-size = <0x4000>; // L1, 16K |
| 30 |
timebase-frequency = <0>; // from bootloader |
| 31 |
bus-frequency = <0>; // from bootloader |
| 32 |
clock-frequency = <0>; // from bootloader |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
memory: memory@0 { |
| 37 |
device_type = "memory"; |
| 38 |
reg = <0x00000000 0x04000000>; // 64MB |
| 39 |
}; |
| 40 |
|
| 41 |
soc: soc5200@f0000000 { |
| 42 |
#address-cells = <1>; |
| 43 |
#size-cells = <1>; |
| 44 |
compatible = "fsl,mpc5200b-immr"; |
| 45 |
ranges = <0 0xf0000000 0x0000c000>; |
| 46 |
reg = <0xf0000000 0x00000100>; |
| 47 |
bus-frequency = <0>; // from bootloader |
| 48 |
system-frequency = <0>; // from bootloader |
| 49 |
|
| 50 |
cdm@200 { |
| 51 |
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; |
| 52 |
reg = <0x200 0x38>; |
| 53 |
}; |
| 54 |
|
| 55 |
mpc5200_pic: interrupt-controller@500 { |
| 56 |
// 5200 interrupts are encoded into two levels; |
| 57 |
interrupt-controller; |
| 58 |
#interrupt-cells = <3>; |
| 59 |
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; |
| 60 |
reg = <0x500 0x80>; |
| 61 |
}; |
| 62 |
|
| 63 |
gpt0: timer@600 { // General Purpose Timer |
| 64 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 65 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 66 |
reg = <0x600 0x10>; |
| 67 |
interrupts = <1 9 0>; |
| 68 |
// add 'fsl,has-wdt' to enable watchdog |
| 69 |
}; |
| 70 |
|
| 71 |
gpt1: timer@610 { // General Purpose Timer |
| 72 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 73 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 74 |
reg = <0x610 0x10>; |
| 75 |
interrupts = <1 10 0>; |
| 76 |
}; |
| 77 |
|
| 78 |
gpt2: timer@620 { // General Purpose Timer |
| 79 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 80 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 81 |
reg = <0x620 0x10>; |
| 82 |
interrupts = <1 11 0>; |
| 83 |
}; |
| 84 |
|
| 85 |
gpt3: timer@630 { // General Purpose Timer |
| 86 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 87 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 88 |
reg = <0x630 0x10>; |
| 89 |
interrupts = <1 12 0>; |
| 90 |
}; |
| 91 |
|
| 92 |
gpt4: timer@640 { // General Purpose Timer |
| 93 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 94 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 95 |
reg = <0x640 0x10>; |
| 96 |
interrupts = <1 13 0>; |
| 97 |
}; |
| 98 |
|
| 99 |
gpt5: timer@650 { // General Purpose Timer |
| 100 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 101 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 102 |
reg = <0x650 0x10>; |
| 103 |
interrupts = <1 14 0>; |
| 104 |
}; |
| 105 |
|
| 106 |
gpt6: timer@660 { // General Purpose Timer |
| 107 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 108 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 109 |
reg = <0x660 0x10>; |
| 110 |
interrupts = <1 15 0>; |
| 111 |
}; |
| 112 |
|
| 113 |
gpt7: timer@670 { // General Purpose Timer |
| 114 |
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; |
| 115 |
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode |
| 116 |
reg = <0x670 0x10>; |
| 117 |
interrupts = <1 16 0>; |
| 118 |
}; |
| 119 |
|
| 120 |
rtc@800 { // Real time clock |
| 121 |
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; |
| 122 |
reg = <0x800 0x100>; |
| 123 |
interrupts = <1 5 0 1 6 0>; |
| 124 |
}; |
| 125 |
|
| 126 |
can@900 { |
| 127 |
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; |
| 128 |
interrupts = <2 17 0>; |
| 129 |
reg = <0x900 0x80>; |
| 130 |
}; |
| 131 |
|
| 132 |
can@980 { |
| 133 |
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; |
| 134 |
interrupts = <2 18 0>; |
| 135 |
reg = <0x980 0x80>; |
| 136 |
}; |
| 137 |
|
| 138 |
gpio_simple: gpio@b00 { |
| 139 |
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; |
| 140 |
reg = <0xb00 0x40>; |
| 141 |
interrupts = <1 7 0>; |
| 142 |
gpio-controller; |
| 143 |
#gpio-cells = <2>; |
| 144 |
}; |
| 145 |
|
| 146 |
gpio_wkup: gpio@c00 { |
| 147 |
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; |
| 148 |
reg = <0xc00 0x40>; |
| 149 |
interrupts = <1 8 0 0 3 0>; |
| 150 |
gpio-controller; |
| 151 |
#gpio-cells = <2>; |
| 152 |
}; |
| 153 |
|
| 154 |
spi@f00 { |
| 155 |
#address-cells = <1>; |
| 156 |
#size-cells = <0>; |
| 157 |
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; |
| 158 |
reg = <0xf00 0x20>; |
| 159 |
interrupts = <2 13 0 2 14 0>; |
| 160 |
}; |
| 161 |
|
| 162 |
usb: usb@1000 { |
| 163 |
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; |
| 164 |
reg = <0x1000 0xff>; |
| 165 |
interrupts = <2 6 0>; |
| 166 |
}; |
| 167 |
|
| 168 |
dma-controller@1200 { |
| 169 |
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; |
| 170 |
reg = <0x1200 0x80>; |
| 171 |
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 |
| 172 |
3 4 0 3 5 0 3 6 0 3 7 0 |
| 173 |
3 8 0 3 9 0 3 10 0 3 11 0 |
| 174 |
3 12 0 3 13 0 3 14 0 3 15 0>; |
| 175 |
}; |
| 176 |
|
| 177 |
xlb@1f00 { |
| 178 |
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; |
| 179 |
reg = <0x1f00 0x100>; |
| 180 |
}; |
| 181 |
|
| 182 |
psc1: psc@2000 { // PSC1 |
| 183 |
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; |
| 184 |
reg = <0x2000 0x100>; |
| 185 |
interrupts = <2 1 0>; |
| 186 |
}; |
| 187 |
|
| 188 |
psc2: psc@2200 { // PSC2 |
| 189 |
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; |
| 190 |
reg = <0x2200 0x100>; |
| 191 |
interrupts = <2 2 0>; |
| 192 |
}; |
| 193 |
|
| 194 |
psc3: psc@2400 { // PSC3 |
| 195 |
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; |
| 196 |
reg = <0x2400 0x100>; |
| 197 |
interrupts = <2 3 0>; |
| 198 |
}; |
| 199 |
|
| 200 |
psc4: psc@2600 { // PSC4 |
| 201 |
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; |
| 202 |
reg = <0x2600 0x100>; |
| 203 |
interrupts = <2 11 0>; |
| 204 |
}; |
| 205 |
|
| 206 |
psc5: psc@2800 { // PSC5 |
| 207 |
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; |
| 208 |
reg = <0x2800 0x100>; |
| 209 |
interrupts = <2 12 0>; |
| 210 |
}; |
| 211 |
|
| 212 |
psc6: psc@2c00 { // PSC6 |
| 213 |
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; |
| 214 |
reg = <0x2c00 0x100>; |
| 215 |
interrupts = <2 4 0>; |
| 216 |
}; |
| 217 |
|
| 218 |
eth0: ethernet@3000 { |
| 219 |
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; |
| 220 |
reg = <0x3000 0x400>; |
| 221 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 222 |
interrupts = <2 5 0>; |
| 223 |
}; |
| 224 |
|
| 225 |
mdio@3000 { |
| 226 |
#address-cells = <1>; |
| 227 |
#size-cells = <0>; |
| 228 |
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; |
| 229 |
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts |
| 230 |
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. |
| 231 |
}; |
| 232 |
|
| 233 |
ata@3a00 { |
| 234 |
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; |
| 235 |
reg = <0x3a00 0x100>; |
| 236 |
interrupts = <2 7 0>; |
| 237 |
}; |
| 238 |
|
| 239 |
sclpc@3c00 { |
| 240 |
compatible = "fsl,mpc5200-lpbfifo"; |
| 241 |
reg = <0x3c00 0x60>; |
| 242 |
interrupts = <2 23 0>; |
| 243 |
}; |
| 244 |
|
| 245 |
i2c@3d00 { |
| 246 |
#address-cells = <1>; |
| 247 |
#size-cells = <0>; |
| 248 |
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; |
| 249 |
reg = <0x3d00 0x40>; |
| 250 |
interrupts = <2 15 0>; |
| 251 |
}; |
| 252 |
|
| 253 |
i2c@3d40 { |
| 254 |
#address-cells = <1>; |
| 255 |
#size-cells = <0>; |
| 256 |
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; |
| 257 |
reg = <0x3d40 0x40>; |
| 258 |
interrupts = <2 16 0>; |
| 259 |
}; |
| 260 |
|
| 261 |
sram@8000 { |
| 262 |
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; |
| 263 |
reg = <0x8000 0x4000>; |
| 264 |
}; |
| 265 |
}; |
| 266 |
|
| 267 |
pci: pci@f0000d00 { |
| 268 |
#interrupt-cells = <1>; |
| 269 |
#size-cells = <2>; |
| 270 |
#address-cells = <3>; |
| 271 |
device_type = "pci"; |
| 272 |
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; |
| 273 |
reg = <0xf0000d00 0x100>; |
| 274 |
// interrupt-map-mask = need to add |
| 275 |
// interrupt-map = need to add |
| 276 |
clock-frequency = <0>; // From boot loader |
| 277 |
interrupts = <2 8 0 2 9 0 2 10 0>; |
| 278 |
bus-range = <0 0>; |
| 279 |
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, |
| 280 |
<0x02000000 0 0x90000000 0x90000000 0 0x10000000>, |
| 281 |
<0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; |
| 282 |
}; |
| 283 |
|
| 284 |
localbus: localbus { |
| 285 |
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; |
| 286 |
#address-cells = <2>; |
| 287 |
#size-cells = <1>; |
| 288 |
ranges = <0 0 0xfc000000 0x2000000>; |
| 289 |
}; |
| 290 |
}; |