| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* STx/Freescale ADS5125 MPC5125 silicon |
| 4 |
* |
| 5 |
* Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved. |
| 6 |
* |
| 7 |
* Reworked by Matteo Facchinetti ([email protected]) |
| 8 |
* Copyright (C) 2013 Sirius Electronic Systems |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <dt-bindings/clock/mpc512x-clock.h> |
| 12 |
|
| 13 |
/dts-v1/; |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "mpc5125twr"; // In BSP "mpc5125ads" |
| 17 |
compatible = "fsl,mpc5125ads", "fsl,mpc5125"; |
| 18 |
#address-cells = <1>; |
| 19 |
#size-cells = <1>; |
| 20 |
interrupt-parent = <&ipic>; |
| 21 |
|
| 22 |
aliases { |
| 23 |
gpio0 = &gpio0; |
| 24 |
gpio1 = &gpio1; |
| 25 |
ethernet0 = ð0; |
| 26 |
}; |
| 27 |
|
| 28 |
cpus { |
| 29 |
#address-cells = <1>; |
| 30 |
#size-cells = <0>; |
| 31 |
|
| 32 |
PowerPC,5125@0 { |
| 33 |
device_type = "cpu"; |
| 34 |
reg = <0>; |
| 35 |
d-cache-line-size = <0x20>; // 32 bytes |
| 36 |
i-cache-line-size = <0x20>; // 32 bytes |
| 37 |
d-cache-size = <0x8000>; // L1, 32K |
| 38 |
i-cache-size = <0x8000>; // L1, 32K |
| 39 |
timebase-frequency = <49500000>;// 49.5 MHz (csb/4) |
| 40 |
bus-frequency = <198000000>; // 198 MHz csb bus |
| 41 |
clock-frequency = <396000000>; // 396 MHz ppc core |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
memory { |
| 46 |
device_type = "memory"; |
| 47 |
reg = <0x00000000 0x10000000>; // 256MB at 0 |
| 48 |
}; |
| 49 |
|
| 50 |
sram@30000000 { |
| 51 |
compatible = "fsl,mpc5121-sram"; |
| 52 |
reg = <0x30000000 0x08000>; // 32K at 0x30000000 |
| 53 |
}; |
| 54 |
|
| 55 |
clocks { |
| 56 |
#address-cells = <1>; |
| 57 |
#size-cells = <0>; |
| 58 |
|
| 59 |
osc: osc { |
| 60 |
compatible = "fixed-clock"; |
| 61 |
#clock-cells = <0>; |
| 62 |
clock-frequency = <33000000>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
soc@80000000 { |
| 67 |
compatible = "fsl,mpc5121-immr"; |
| 68 |
#address-cells = <1>; |
| 69 |
#size-cells = <1>; |
| 70 |
ranges = <0x0 0x80000000 0x400000>; |
| 71 |
reg = <0x80000000 0x400000>; |
| 72 |
bus-frequency = <66000000>; // 66 MHz ips bus |
| 73 |
|
| 74 |
// IPIC |
| 75 |
// interrupts cell = <intr #, sense> |
| 76 |
// sense values match linux IORESOURCE_IRQ_* defines: |
| 77 |
// sense == 8: Level, low assertion |
| 78 |
// sense == 2: Edge, high-to-low change |
| 79 |
// |
| 80 |
ipic: interrupt-controller@c00 { |
| 81 |
compatible = "fsl,mpc5121-ipic", "fsl,ipic"; |
| 82 |
interrupt-controller; |
| 83 |
#address-cells = <0>; |
| 84 |
#interrupt-cells = <2>; |
| 85 |
reg = <0xc00 0x100>; |
| 86 |
}; |
| 87 |
|
| 88 |
rtc@a00 { // Real time clock |
| 89 |
compatible = "fsl,mpc5121-rtc"; |
| 90 |
reg = <0xa00 0x100>; |
| 91 |
interrupts = <79 0x8 80 0x8>; |
| 92 |
}; |
| 93 |
|
| 94 |
reset@e00 { // Reset module |
| 95 |
compatible = "fsl,mpc5125-reset"; |
| 96 |
reg = <0xe00 0x100>; |
| 97 |
}; |
| 98 |
|
| 99 |
clks: clock@f00 { // Clock control |
| 100 |
compatible = "fsl,mpc5121-clock"; |
| 101 |
reg = <0xf00 0x100>; |
| 102 |
#clock-cells = <1>; |
| 103 |
clocks = <&osc>; |
| 104 |
clock-names = "osc"; |
| 105 |
}; |
| 106 |
|
| 107 |
pmc@1000 { // Power Management Controller |
| 108 |
compatible = "fsl,mpc5121-pmc"; |
| 109 |
reg = <0x1000 0x100>; |
| 110 |
interrupts = <83 0x2>; |
| 111 |
}; |
| 112 |
|
| 113 |
gpio0: gpio@1100 { |
| 114 |
compatible = "fsl,mpc5125-gpio"; |
| 115 |
reg = <0x1100 0x080>; |
| 116 |
interrupts = <78 0x8>; |
| 117 |
}; |
| 118 |
|
| 119 |
gpio1: gpio@1180 { |
| 120 |
compatible = "fsl,mpc5125-gpio"; |
| 121 |
reg = <0x1180 0x080>; |
| 122 |
interrupts = <86 0x8>; |
| 123 |
}; |
| 124 |
|
| 125 |
can@1300 { // CAN rev.2 |
| 126 |
compatible = "fsl,mpc5121-mscan"; |
| 127 |
interrupts = <12 0x8>; |
| 128 |
reg = <0x1300 0x80>; |
| 129 |
clocks = <&clks MPC512x_CLK_BDLC>, |
| 130 |
<&clks MPC512x_CLK_IPS>, |
| 131 |
<&clks MPC512x_CLK_SYS>, |
| 132 |
<&clks MPC512x_CLK_REF>, |
| 133 |
<&clks MPC512x_CLK_MSCAN0_MCLK>; |
| 134 |
clock-names = "ipg", "ips", "sys", "ref", "mclk"; |
| 135 |
}; |
| 136 |
|
| 137 |
can@1380 { |
| 138 |
compatible = "fsl,mpc5121-mscan"; |
| 139 |
interrupts = <13 0x8>; |
| 140 |
reg = <0x1380 0x80>; |
| 141 |
clocks = <&clks MPC512x_CLK_BDLC>, |
| 142 |
<&clks MPC512x_CLK_IPS>, |
| 143 |
<&clks MPC512x_CLK_SYS>, |
| 144 |
<&clks MPC512x_CLK_REF>, |
| 145 |
<&clks MPC512x_CLK_MSCAN1_MCLK>; |
| 146 |
clock-names = "ipg", "ips", "sys", "ref", "mclk"; |
| 147 |
}; |
| 148 |
|
| 149 |
sdhc@1500 { |
| 150 |
compatible = "fsl,mpc5121-sdhc"; |
| 151 |
interrupts = <8 0x8>; |
| 152 |
reg = <0x1500 0x100>; |
| 153 |
clocks = <&clks MPC512x_CLK_IPS>, |
| 154 |
<&clks MPC512x_CLK_SDHC>; |
| 155 |
clock-names = "ipg", "per"; |
| 156 |
}; |
| 157 |
|
| 158 |
i2c@1700 { |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <0>; |
| 161 |
compatible = "fsl,mpc5121-i2c", "fsl-i2c"; |
| 162 |
reg = <0x1700 0x20>; |
| 163 |
interrupts = <0x9 0x8>; |
| 164 |
clocks = <&clks MPC512x_CLK_I2C>; |
| 165 |
clock-names = "ipg"; |
| 166 |
}; |
| 167 |
|
| 168 |
i2c@1720 { |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <0>; |
| 171 |
compatible = "fsl,mpc5121-i2c", "fsl-i2c"; |
| 172 |
reg = <0x1720 0x20>; |
| 173 |
interrupts = <0xa 0x8>; |
| 174 |
clocks = <&clks MPC512x_CLK_I2C>; |
| 175 |
clock-names = "ipg"; |
| 176 |
}; |
| 177 |
|
| 178 |
i2c@1740 { |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
compatible = "fsl,mpc5121-i2c", "fsl-i2c"; |
| 182 |
reg = <0x1740 0x20>; |
| 183 |
interrupts = <0xb 0x8>; |
| 184 |
clocks = <&clks MPC512x_CLK_I2C>; |
| 185 |
clock-names = "ipg"; |
| 186 |
}; |
| 187 |
|
| 188 |
i2ccontrol@1760 { |
| 189 |
compatible = "fsl,mpc5121-i2c-ctrl"; |
| 190 |
reg = <0x1760 0x8>; |
| 191 |
}; |
| 192 |
|
| 193 |
diu@2100 { |
| 194 |
compatible = "fsl,mpc5121-diu"; |
| 195 |
reg = <0x2100 0x100>; |
| 196 |
interrupts = <64 0x8>; |
| 197 |
clocks = <&clks MPC512x_CLK_DIU>; |
| 198 |
clock-names = "ipg"; |
| 199 |
}; |
| 200 |
|
| 201 |
mdio@2800 { |
| 202 |
compatible = "fsl,mpc5121-fec-mdio"; |
| 203 |
reg = <0x2800 0x800>; |
| 204 |
#address-cells = <1>; |
| 205 |
#size-cells = <0>; |
| 206 |
phy0: ethernet-phy@0 { |
| 207 |
reg = <1>; |
| 208 |
}; |
| 209 |
}; |
| 210 |
|
| 211 |
eth0: ethernet@2800 { |
| 212 |
compatible = "fsl,mpc5125-fec"; |
| 213 |
reg = <0x2800 0x800>; |
| 214 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 215 |
interrupts = <4 0x8>; |
| 216 |
phy-handle = < &phy0 >; |
| 217 |
phy-connection-type = "rmii"; |
| 218 |
clocks = <&clks MPC512x_CLK_FEC>; |
| 219 |
clock-names = "per"; |
| 220 |
}; |
| 221 |
|
| 222 |
// IO control |
| 223 |
ioctl@a000 { |
| 224 |
compatible = "fsl,mpc5125-ioctl"; |
| 225 |
reg = <0xA000 0x1000>; |
| 226 |
}; |
| 227 |
|
| 228 |
// disable USB1 port |
| 229 |
// TODO: |
| 230 |
// correct pinmux config and fix USB3320 ulpi dependency |
| 231 |
// before re-enabling it |
| 232 |
usb@3000 { |
| 233 |
compatible = "fsl,mpc5121-usb2-dr"; |
| 234 |
reg = <0x3000 0x400>; |
| 235 |
#address-cells = <1>; |
| 236 |
#size-cells = <0>; |
| 237 |
interrupts = <43 0x8>; |
| 238 |
dr_mode = "host"; |
| 239 |
phy_type = "ulpi"; |
| 240 |
clocks = <&clks MPC512x_CLK_USB1>; |
| 241 |
clock-names = "ipg"; |
| 242 |
status = "disabled"; |
| 243 |
}; |
| 244 |
|
| 245 |
sclpc@10100 { |
| 246 |
compatible = "fsl,mpc512x-lpbfifo"; |
| 247 |
reg = <0x10100 0x50>; |
| 248 |
interrupts = <7 0x8>; |
| 249 |
dmas = <&dma0 26>; |
| 250 |
dma-names = "rx-tx"; |
| 251 |
}; |
| 252 |
|
| 253 |
// 5125 PSCs are not 52xx or 5121 PSC compatible |
| 254 |
// PSC1 uart0 aka ttyPSC0 |
| 255 |
serial@11100 { |
| 256 |
compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; |
| 257 |
reg = <0x11100 0x100>; |
| 258 |
interrupts = <40 0x8>; |
| 259 |
fsl,rx-fifo-size = <16>; |
| 260 |
fsl,tx-fifo-size = <16>; |
| 261 |
clocks = <&clks MPC512x_CLK_PSC1>, |
| 262 |
<&clks MPC512x_CLK_PSC1_MCLK>; |
| 263 |
clock-names = "ipg", "mclk"; |
| 264 |
}; |
| 265 |
|
| 266 |
// PSC9 uart1 aka ttyPSC1 |
| 267 |
serial@11900 { |
| 268 |
compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; |
| 269 |
reg = <0x11900 0x100>; |
| 270 |
interrupts = <40 0x8>; |
| 271 |
fsl,rx-fifo-size = <16>; |
| 272 |
fsl,tx-fifo-size = <16>; |
| 273 |
clocks = <&clks MPC512x_CLK_PSC9>, |
| 274 |
<&clks MPC512x_CLK_PSC9_MCLK>; |
| 275 |
clock-names = "ipg", "mclk"; |
| 276 |
}; |
| 277 |
|
| 278 |
pscfifo@11f00 { |
| 279 |
compatible = "fsl,mpc5121-psc-fifo"; |
| 280 |
reg = <0x11f00 0x100>; |
| 281 |
interrupts = <40 0x8>; |
| 282 |
clocks = <&clks MPC512x_CLK_PSC_FIFO>; |
| 283 |
clock-names = "ipg"; |
| 284 |
}; |
| 285 |
|
| 286 |
dma0: dma@14000 { |
| 287 |
compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2" |
| 288 |
reg = <0x14000 0x1800>; |
| 289 |
interrupts = <65 0x8>; |
| 290 |
#dma-cells = <1>; |
| 291 |
}; |
| 292 |
}; |
| 293 |
}; |