| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* MPC5121E ADS Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2007-2008 Freescale Semiconductor Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "mpc5121.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "mpc5121ads"; |
| 12 |
compatible = "fsl,mpc5121ads", "fsl,mpc5121"; |
| 13 |
|
| 14 |
nfc@40000000 { |
| 15 |
/* |
| 16 |
* ADS has two Hynix 512MB Nand flash chips in a single |
| 17 |
* stacked package. |
| 18 |
*/ |
| 19 |
chips = <2>; |
| 20 |
|
| 21 |
nand@0 { |
| 22 |
label = "nand"; |
| 23 |
reg = <0x00000000 0x40000000>; /* 512MB + 512MB */ |
| 24 |
}; |
| 25 |
}; |
| 26 |
|
| 27 |
localbus@80000020 { |
| 28 |
ranges = <0x0 0x0 0xfc000000 0x04000000 |
| 29 |
0x2 0x0 0x82000000 0x00008000>; |
| 30 |
|
| 31 |
flash@0,0 { |
| 32 |
compatible = "cfi-flash"; |
| 33 |
reg = <0 0x0 0x4000000>; |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <1>; |
| 36 |
bank-width = <4>; |
| 37 |
device-width = <2>; |
| 38 |
|
| 39 |
protected@0 { |
| 40 |
label = "protected"; |
| 41 |
reg = <0x00000000 0x00040000>; // first sector is protected |
| 42 |
read-only; |
| 43 |
}; |
| 44 |
filesystem@40000 { |
| 45 |
label = "filesystem"; |
| 46 |
reg = <0x00040000 0x03c00000>; // 60M for filesystem |
| 47 |
}; |
| 48 |
kernel@3c40000 { |
| 49 |
label = "kernel"; |
| 50 |
reg = <0x03c40000 0x00280000>; // 2.5M for kernel |
| 51 |
}; |
| 52 |
device-tree@3ec0000 { |
| 53 |
label = "device-tree"; |
| 54 |
reg = <0x03ec0000 0x00040000>; // one sector for device tree |
| 55 |
}; |
| 56 |
u-boot@3f00000 { |
| 57 |
label = "u-boot"; |
| 58 |
reg = <0x03f00000 0x00100000>; // 1M for u-boot |
| 59 |
read-only; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
board-control@2,0 { |
| 64 |
compatible = "fsl,mpc5121ads-cpld"; |
| 65 |
reg = <0x2 0x0 0x8000>; |
| 66 |
}; |
| 67 |
|
| 68 |
cpld_pic: pic@2,a { |
| 69 |
compatible = "fsl,mpc5121ads-cpld-pic"; |
| 70 |
interrupt-controller; |
| 71 |
#interrupt-cells = <2>; |
| 72 |
reg = <0x2 0xa 0x5>; |
| 73 |
/* irq routing: |
| 74 |
* all irqs but touch screen are routed to irq0 (ipic 48) |
| 75 |
* touch screen is statically routed to irq1 (ipic 17) |
| 76 |
* so don't use it here |
| 77 |
*/ |
| 78 |
interrupts = <48 0x8>; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
soc@80000000 { |
| 83 |
|
| 84 |
i2c@1700 { |
| 85 |
fsl,preserve-clocking; |
| 86 |
|
| 87 |
hwmon@4a { |
| 88 |
compatible = "adi,ad7414"; |
| 89 |
reg = <0x4a>; |
| 90 |
}; |
| 91 |
|
| 92 |
eeprom@50 { |
| 93 |
compatible = "atmel,24c32"; |
| 94 |
reg = <0x50>; |
| 95 |
}; |
| 96 |
|
| 97 |
rtc@68 { |
| 98 |
compatible = "st,m41t62"; |
| 99 |
reg = <0x68>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
eth0: ethernet@2800 { |
| 104 |
phy-handle = <&phy0>; |
| 105 |
}; |
| 106 |
|
| 107 |
can@2300 { |
| 108 |
status = "disabled"; |
| 109 |
}; |
| 110 |
|
| 111 |
can@2380 { |
| 112 |
status = "disabled"; |
| 113 |
}; |
| 114 |
|
| 115 |
viu@2400 { |
| 116 |
status = "disabled"; |
| 117 |
}; |
| 118 |
|
| 119 |
mdio@2800 { |
| 120 |
phy0: ethernet-phy@0 { |
| 121 |
reg = <1>; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
/* mpc5121ads only uses USB0 */ |
| 126 |
usb@3000 { |
| 127 |
status = "disabled"; |
| 128 |
}; |
| 129 |
|
| 130 |
/* USB0 using internal UTMI PHY */ |
| 131 |
usb@4000 { |
| 132 |
dr_mode = "host"; |
| 133 |
fsl,invert-drvvbus; |
| 134 |
fsl,invert-pwr-fault; |
| 135 |
}; |
| 136 |
|
| 137 |
/* PSC3 serial port A aka ttyPSC0 */ |
| 138 |
psc@11300 { |
| 139 |
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
| 140 |
}; |
| 141 |
|
| 142 |
/* PSC4 serial port B aka ttyPSC1 */ |
| 143 |
psc@11400 { |
| 144 |
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
| 145 |
}; |
| 146 |
|
| 147 |
/* PSC5 in ac97 mode */ |
| 148 |
ac97: psc@11500 { |
| 149 |
compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; |
| 150 |
fsl,mode = "ac97-slave"; |
| 151 |
fsl,rx-fifo-size = <384>; |
| 152 |
fsl,tx-fifo-size = <384>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
pci: pci@80008500 { |
| 157 |
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 158 |
interrupt-map = < |
| 159 |
/* IDSEL 0x15 - Slot 1 PCI */ |
| 160 |
0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 |
| 161 |
0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 |
| 162 |
0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 |
| 163 |
0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 |
| 164 |
|
| 165 |
/* IDSEL 0x16 - Slot 2 MiniPCI */ |
| 166 |
0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 |
| 167 |
0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 |
| 168 |
|
| 169 |
/* IDSEL 0x17 - Slot 3 MiniPCI */ |
| 170 |
0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 |
| 171 |
0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 |
| 172 |
>; |
| 173 |
}; |
| 174 |
}; |