| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Motion-PRO board Device Tree Source |
| 4 |
* |
| 5 |
* Copyright (C) 2007 Semihalf |
| 6 |
* Marian Balakowicz <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/include/ "mpc5200b.dtsi" |
| 10 |
|
| 11 |
&gpt0 { fsl,has-wdt; }; |
| 12 |
&gpt6 { // Motion-PRO status LED |
| 13 |
compatible = "promess,motionpro-led"; |
| 14 |
label = "motionpro-statusled"; |
| 15 |
blink-delay = <100>; // 100 msec |
| 16 |
}; |
| 17 |
&gpt7 { // Motion-PRO ready LED |
| 18 |
compatible = "promess,motionpro-led"; |
| 19 |
label = "motionpro-readyled"; |
| 20 |
}; |
| 21 |
|
| 22 |
/ { |
| 23 |
model = "promess,motionpro"; |
| 24 |
compatible = "promess,motionpro"; |
| 25 |
|
| 26 |
soc5200@f0000000 { |
| 27 |
can@900 { |
| 28 |
status = "disabled"; |
| 29 |
}; |
| 30 |
|
| 31 |
psc@2000 { // PSC1 |
| 32 |
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 33 |
}; |
| 34 |
|
| 35 |
// PSC2 in spi master mode |
| 36 |
psc@2200 { // PSC2 |
| 37 |
compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; |
| 38 |
cell-index = <1>; |
| 39 |
}; |
| 40 |
|
| 41 |
psc@2400 { // PSC3 |
| 42 |
status = "disabled"; |
| 43 |
}; |
| 44 |
|
| 45 |
psc@2600 { // PSC4 |
| 46 |
status = "disabled"; |
| 47 |
}; |
| 48 |
|
| 49 |
psc@2800 { // PSC5 |
| 50 |
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 51 |
}; |
| 52 |
|
| 53 |
psc@2c00 { // PSC6 |
| 54 |
status = "disabled"; |
| 55 |
}; |
| 56 |
|
| 57 |
ethernet@3000 { |
| 58 |
phy-handle = <&phy0>; |
| 59 |
}; |
| 60 |
|
| 61 |
mdio@3000 { |
| 62 |
phy0: ethernet-phy@2 { |
| 63 |
reg = <2>; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
i2c@3d00 { |
| 68 |
status = "disabled"; |
| 69 |
}; |
| 70 |
|
| 71 |
i2c@3d40 { |
| 72 |
rtc@68 { |
| 73 |
compatible = "dallas,ds1339"; |
| 74 |
reg = <0x68>; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
sram@8000 { |
| 79 |
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; |
| 80 |
reg = <0x8000 0x4000>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
pci@f0000d00 { |
| 85 |
status = "disabled"; |
| 86 |
}; |
| 87 |
|
| 88 |
localbus { |
| 89 |
ranges = <0 0 0xff000000 0x01000000 |
| 90 |
1 0 0x50000000 0x00010000 |
| 91 |
2 0 0x50010000 0x00010000 |
| 92 |
3 0 0x50020000 0x00010000>; |
| 93 |
|
| 94 |
// 8-bit DualPort SRAM on LocalPlus Bus CS1 |
| 95 |
kollmorgen@1,0 { |
| 96 |
compatible = "promess,motionpro-kollmorgen"; |
| 97 |
reg = <1 0 0x10000>; |
| 98 |
interrupts = <1 1 0>; |
| 99 |
}; |
| 100 |
|
| 101 |
// 8-bit board CPLD on LocalPlus Bus CS2 |
| 102 |
cpld@2,0 { |
| 103 |
compatible = "promess,motionpro-cpld"; |
| 104 |
reg = <2 0 0x10000>; |
| 105 |
}; |
| 106 |
|
| 107 |
// 8-bit custom Anybus Module on LocalPlus Bus CS3 |
| 108 |
anybus@3,0 { |
| 109 |
compatible = "promess,motionpro-anybus"; |
| 110 |
reg = <3 0 0x10000>; |
| 111 |
}; |
| 112 |
pro_module_general@3,0 { |
| 113 |
compatible = "promess,pro_module_general"; |
| 114 |
reg = <3 0 3>; |
| 115 |
}; |
| 116 |
pro_module_dio@3,800 { |
| 117 |
compatible = "promess,pro_module_dio"; |
| 118 |
reg = <3 0x800 2>; |
| 119 |
}; |
| 120 |
|
| 121 |
// 16-bit flash device at LocalPlus Bus CS0 |
| 122 |
flash@0,0 { |
| 123 |
compatible = "cfi-flash"; |
| 124 |
reg = <0 0 0x01000000>; |
| 125 |
bank-width = <2>; |
| 126 |
device-width = <2>; |
| 127 |
#size-cells = <1>; |
| 128 |
#address-cells = <1>; |
| 129 |
}; |
| 130 |
|
| 131 |
}; |
| 132 |
}; |