| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Keymile KMETER1 Device Tree Source |
| 4 |
* |
| 5 |
* 2008-2011 DENX Software Engineering GmbH |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "KMETER1"; |
| 12 |
compatible = "keymile,KMETER1"; |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
|
| 16 |
aliases { |
| 17 |
ethernet0 = &enet_piggy2; |
| 18 |
ethernet1 = &enet_estar1; |
| 19 |
ethernet2 = &enet_estar2; |
| 20 |
ethernet3 = &enet_eth1; |
| 21 |
ethernet4 = &enet_eth2; |
| 22 |
ethernet5 = &enet_eth3; |
| 23 |
ethernet6 = &enet_eth4; |
| 24 |
serial0 = &serial0; |
| 25 |
}; |
| 26 |
|
| 27 |
cpus { |
| 28 |
#address-cells = <1>; |
| 29 |
#size-cells = <0>; |
| 30 |
|
| 31 |
PowerPC,8360@0 { |
| 32 |
device_type = "cpu"; |
| 33 |
reg = <0x0>; |
| 34 |
d-cache-line-size = <32>; // 32 bytes |
| 35 |
i-cache-line-size = <32>; // 32 bytes |
| 36 |
d-cache-size = <32768>; // L1, 32K |
| 37 |
i-cache-size = <32768>; // L1, 32K |
| 38 |
timebase-frequency = <0>; /* Filled in by U-Boot */ |
| 39 |
bus-frequency = <0>; /* Filled in by U-Boot */ |
| 40 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
memory { |
| 45 |
device_type = "memory"; |
| 46 |
reg = <0 0>; /* Filled in by U-Boot */ |
| 47 |
}; |
| 48 |
|
| 49 |
soc8360@e0000000 { |
| 50 |
#address-cells = <1>; |
| 51 |
#size-cells = <1>; |
| 52 |
device_type = "soc"; |
| 53 |
compatible = "fsl,mpc8360-immr", "simple-bus"; |
| 54 |
ranges = <0x0 0xe0000000 0x00200000>; |
| 55 |
reg = <0xe0000000 0x00000200>; |
| 56 |
bus-frequency = <0>; /* Filled in by U-Boot */ |
| 57 |
|
| 58 |
pmc: power@b00 { |
| 59 |
compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; |
| 60 |
reg = <0xb00 0x100 0xa00 0x100>; |
| 61 |
interrupts = <80 0x8>; |
| 62 |
interrupt-parent = <&ipic>; |
| 63 |
}; |
| 64 |
|
| 65 |
i2c@3000 { |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <0>; |
| 68 |
cell-index = <0>; |
| 69 |
compatible = "fsl,mpc8313-i2c","fsl-i2c"; |
| 70 |
reg = <0x3000 0x100>; |
| 71 |
interrupts = <14 0x8>; |
| 72 |
interrupt-parent = <&ipic>; |
| 73 |
clock-frequency = <400000>; |
| 74 |
}; |
| 75 |
|
| 76 |
serial0: serial@4500 { |
| 77 |
cell-index = <0>; |
| 78 |
device_type = "serial"; |
| 79 |
compatible = "fsl,ns16550", "ns16550"; |
| 80 |
reg = <0x4500 0x100>; |
| 81 |
clock-frequency = <264000000>; |
| 82 |
interrupts = <9 0x8>; |
| 83 |
interrupt-parent = <&ipic>; |
| 84 |
}; |
| 85 |
|
| 86 |
dma@82a8 { |
| 87 |
#address-cells = <1>; |
| 88 |
#size-cells = <1>; |
| 89 |
compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; |
| 90 |
reg = <0x82a8 4>; |
| 91 |
ranges = <0 0x8100 0x1a8>; |
| 92 |
interrupt-parent = <&ipic>; |
| 93 |
interrupts = <71 8>; |
| 94 |
cell-index = <0>; |
| 95 |
dma-channel@0 { |
| 96 |
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| 97 |
reg = <0 0x80>; |
| 98 |
interrupt-parent = <&ipic>; |
| 99 |
interrupts = <71 8>; |
| 100 |
}; |
| 101 |
dma-channel@80 { |
| 102 |
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| 103 |
reg = <0x80 0x80>; |
| 104 |
interrupt-parent = <&ipic>; |
| 105 |
interrupts = <71 8>; |
| 106 |
}; |
| 107 |
dma-channel@100 { |
| 108 |
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| 109 |
reg = <0x100 0x80>; |
| 110 |
interrupt-parent = <&ipic>; |
| 111 |
interrupts = <71 8>; |
| 112 |
}; |
| 113 |
dma-channel@180 { |
| 114 |
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| 115 |
reg = <0x180 0x28>; |
| 116 |
interrupt-parent = <&ipic>; |
| 117 |
interrupts = <71 8>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
ipic: pic@700 { |
| 122 |
#address-cells = <0>; |
| 123 |
#interrupt-cells = <2>; |
| 124 |
compatible = "fsl,pq2pro-pic", "fsl,ipic"; |
| 125 |
interrupt-controller; |
| 126 |
reg = <0x700 0x100>; |
| 127 |
}; |
| 128 |
|
| 129 |
par_io@1400 { |
| 130 |
#address-cells = <1>; |
| 131 |
#size-cells = <0>; |
| 132 |
reg = <0x1400 0x100>; |
| 133 |
compatible = "fsl,mpc8360-par_io"; |
| 134 |
num-ports = <7>; |
| 135 |
|
| 136 |
qe_pio_c: gpio-controller@30 { |
| 137 |
#gpio-cells = <2>; |
| 138 |
compatible = "fsl,mpc8360-qe-pario-bank", |
| 139 |
"fsl,mpc8323-qe-pario-bank"; |
| 140 |
reg = <0x1430 0x18>; |
| 141 |
gpio-controller; |
| 142 |
}; |
| 143 |
pio_ucc1: ucc_pin@0 { |
| 144 |
reg = <0>; |
| 145 |
|
| 146 |
pio-map = < |
| 147 |
/* port pin dir open_drain assignment has_irq */ |
| 148 |
0 1 3 0 2 0 /* MDIO */ |
| 149 |
0 2 1 0 1 0 /* MDC */ |
| 150 |
|
| 151 |
0 3 1 0 1 0 /* TxD0 */ |
| 152 |
0 4 1 0 1 0 /* TxD1 */ |
| 153 |
0 5 1 0 1 0 /* TxD2 */ |
| 154 |
0 6 1 0 1 0 /* TxD3 */ |
| 155 |
0 9 2 0 1 0 /* RxD0 */ |
| 156 |
0 10 2 0 1 0 /* RxD1 */ |
| 157 |
0 11 2 0 1 0 /* RxD2 */ |
| 158 |
0 12 2 0 1 0 /* RxD3 */ |
| 159 |
0 7 1 0 1 0 /* TX_EN */ |
| 160 |
0 8 1 0 1 0 /* TX_ER */ |
| 161 |
0 15 2 0 1 0 /* RX_DV */ |
| 162 |
0 16 2 0 1 0 /* RX_ER */ |
| 163 |
0 0 2 0 1 0 /* RX_CLK */ |
| 164 |
2 9 1 0 3 0 /* GTX_CLK - CLK10 */ |
| 165 |
2 8 2 0 1 0 /* GTX125 - CLK9 */ |
| 166 |
>; |
| 167 |
}; |
| 168 |
|
| 169 |
pio_ucc2: ucc_pin@1 { |
| 170 |
reg = <1>; |
| 171 |
|
| 172 |
pio-map = < |
| 173 |
/* port pin dir open_drain assignment has_irq */ |
| 174 |
0 1 3 0 2 0 /* MDIO */ |
| 175 |
0 2 1 0 1 0 /* MDC */ |
| 176 |
|
| 177 |
0 17 1 0 1 0 /* TxD0 */ |
| 178 |
0 18 1 0 1 0 /* TxD1 */ |
| 179 |
0 19 1 0 1 0 /* TxD2 */ |
| 180 |
0 20 1 0 1 0 /* TxD3 */ |
| 181 |
0 23 2 0 1 0 /* RxD0 */ |
| 182 |
0 24 2 0 1 0 /* RxD1 */ |
| 183 |
0 25 2 0 1 0 /* RxD2 */ |
| 184 |
0 26 2 0 1 0 /* RxD3 */ |
| 185 |
0 21 1 0 1 0 /* TX_EN */ |
| 186 |
0 22 1 0 1 0 /* TX_ER */ |
| 187 |
0 29 2 0 1 0 /* RX_DV */ |
| 188 |
0 30 2 0 1 0 /* RX_ER */ |
| 189 |
0 31 2 0 1 0 /* RX_CLK */ |
| 190 |
2 2 1 0 2 0 /* GTX_CLK - CLK3 */ |
| 191 |
2 3 2 0 1 0 /* GTX125 - CLK4 */ |
| 192 |
>; |
| 193 |
}; |
| 194 |
|
| 195 |
pio_ucc4: ucc_pin@3 { |
| 196 |
reg = <3>; |
| 197 |
|
| 198 |
pio-map = < |
| 199 |
/* port pin dir open_drain assignment has_irq */ |
| 200 |
0 1 3 0 2 0 /* MDIO */ |
| 201 |
0 2 1 0 1 0 /* MDC */ |
| 202 |
|
| 203 |
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ |
| 204 |
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ |
| 205 |
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ |
| 206 |
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ |
| 207 |
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ |
| 208 |
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ |
| 209 |
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ |
| 210 |
|
| 211 |
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ |
| 212 |
>; |
| 213 |
}; |
| 214 |
|
| 215 |
pio_ucc5: ucc_pin@4 { |
| 216 |
reg = <4>; |
| 217 |
|
| 218 |
pio-map = < |
| 219 |
/* port pin dir open_drain assignment has_irq */ |
| 220 |
0 1 3 0 2 0 /* MDIO */ |
| 221 |
0 2 1 0 1 0 /* MDC */ |
| 222 |
|
| 223 |
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ |
| 224 |
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ |
| 225 |
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ |
| 226 |
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ |
| 227 |
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ |
| 228 |
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ |
| 229 |
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ |
| 230 |
>; |
| 231 |
}; |
| 232 |
|
| 233 |
pio_ucc6: ucc_pin@5 { |
| 234 |
reg = <5>; |
| 235 |
|
| 236 |
pio-map = < |
| 237 |
/* port pin dir open_drain assignment has_irq */ |
| 238 |
0 1 3 0 2 0 /* MDIO */ |
| 239 |
0 2 1 0 1 0 /* MDC */ |
| 240 |
|
| 241 |
3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ |
| 242 |
3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ |
| 243 |
3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ |
| 244 |
3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ |
| 245 |
3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ |
| 246 |
3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ |
| 247 |
3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ |
| 248 |
>; |
| 249 |
}; |
| 250 |
|
| 251 |
pio_ucc7: ucc_pin@6 { |
| 252 |
reg = <6>; |
| 253 |
|
| 254 |
pio-map = < |
| 255 |
/* port pin dir open_drain assignment has_irq */ |
| 256 |
0 1 3 0 2 0 /* MDIO */ |
| 257 |
0 2 1 0 1 0 /* MDC */ |
| 258 |
|
| 259 |
4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ |
| 260 |
4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ |
| 261 |
4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ |
| 262 |
4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ |
| 263 |
4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ |
| 264 |
4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ |
| 265 |
4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ |
| 266 |
>; |
| 267 |
}; |
| 268 |
|
| 269 |
pio_ucc8: ucc_pin@7 { |
| 270 |
reg = <7>; |
| 271 |
|
| 272 |
pio-map = < |
| 273 |
/* port pin dir open_drain assignment has_irq */ |
| 274 |
0 1 3 0 2 0 /* MDIO */ |
| 275 |
0 2 1 0 1 0 /* MDC */ |
| 276 |
|
| 277 |
4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ |
| 278 |
4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ |
| 279 |
4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ |
| 280 |
4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ |
| 281 |
4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ |
| 282 |
4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ |
| 283 |
4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ |
| 284 |
|
| 285 |
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ |
| 286 |
>; |
| 287 |
}; |
| 288 |
|
| 289 |
}; |
| 290 |
|
| 291 |
qe@100000 { |
| 292 |
#address-cells = <1>; |
| 293 |
#size-cells = <1>; |
| 294 |
compatible = "fsl,qe"; |
| 295 |
ranges = <0x0 0x100000 0x100000>; |
| 296 |
reg = <0x100000 0x480>; |
| 297 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 298 |
brg-frequency = <0>; /* Filled in by U-Boot */ |
| 299 |
bus-frequency = <0>; /* Filled in by U-Boot */ |
| 300 |
|
| 301 |
muram@10000 { |
| 302 |
#address-cells = <1>; |
| 303 |
#size-cells = <1>; |
| 304 |
compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| 305 |
ranges = <0x0 0x00010000 0x0000c000>; |
| 306 |
|
| 307 |
data-only@0 { |
| 308 |
compatible = "fsl,qe-muram-data", |
| 309 |
"fsl,cpm-muram-data"; |
| 310 |
reg = <0x0 0xc000>; |
| 311 |
}; |
| 312 |
}; |
| 313 |
|
| 314 |
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ |
| 315 |
enet_estar1: ucc@2000 { |
| 316 |
device_type = "network"; |
| 317 |
compatible = "ucc_geth"; |
| 318 |
cell-index = <1>; |
| 319 |
reg = <0x2000 0x200>; |
| 320 |
interrupts = <32>; |
| 321 |
interrupt-parent = <&qeic>; |
| 322 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 323 |
rx-clock-name = "none"; |
| 324 |
tx-clock-name = "clk9"; |
| 325 |
phy-handle = <&phy_estar1>; |
| 326 |
phy-connection-type = "rgmii-id"; |
| 327 |
pio-handle = <&pio_ucc1>; |
| 328 |
}; |
| 329 |
|
| 330 |
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ |
| 331 |
enet_estar2: ucc@3000 { |
| 332 |
device_type = "network"; |
| 333 |
compatible = "ucc_geth"; |
| 334 |
cell-index = <2>; |
| 335 |
reg = <0x3000 0x200>; |
| 336 |
interrupts = <33>; |
| 337 |
interrupt-parent = <&qeic>; |
| 338 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 339 |
rx-clock-name = "none"; |
| 340 |
tx-clock-name = "clk4"; |
| 341 |
phy-handle = <&phy_estar2>; |
| 342 |
phy-connection-type = "rgmii-id"; |
| 343 |
pio-handle = <&pio_ucc2>; |
| 344 |
}; |
| 345 |
|
| 346 |
/* Piggy2 (UCC4, MDIO 0x00, RMII) */ |
| 347 |
enet_piggy2: ucc@3200 { |
| 348 |
device_type = "network"; |
| 349 |
compatible = "ucc_geth"; |
| 350 |
cell-index = <4>; |
| 351 |
reg = <0x3200 0x200>; |
| 352 |
interrupts = <35>; |
| 353 |
interrupt-parent = <&qeic>; |
| 354 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 355 |
rx-clock-name = "none"; |
| 356 |
tx-clock-name = "clk17"; |
| 357 |
phy-handle = <&phy_piggy2>; |
| 358 |
phy-connection-type = "rmii"; |
| 359 |
pio-handle = <&pio_ucc4>; |
| 360 |
}; |
| 361 |
|
| 362 |
/* Eth-1 (UCC5, MDIO 0x08, RMII) */ |
| 363 |
enet_eth1: ucc@2400 { |
| 364 |
device_type = "network"; |
| 365 |
compatible = "ucc_geth"; |
| 366 |
cell-index = <5>; |
| 367 |
reg = <0x2400 0x200>; |
| 368 |
interrupts = <40>; |
| 369 |
interrupt-parent = <&qeic>; |
| 370 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 371 |
rx-clock-name = "none"; |
| 372 |
tx-clock-name = "clk16"; |
| 373 |
phy-handle = <&phy_eth1>; |
| 374 |
phy-connection-type = "rmii"; |
| 375 |
pio-handle = <&pio_ucc5>; |
| 376 |
}; |
| 377 |
|
| 378 |
/* Eth-2 (UCC6, MDIO 0x09, RMII) */ |
| 379 |
enet_eth2: ucc@3400 { |
| 380 |
device_type = "network"; |
| 381 |
compatible = "ucc_geth"; |
| 382 |
cell-index = <6>; |
| 383 |
reg = <0x3400 0x200>; |
| 384 |
interrupts = <41>; |
| 385 |
interrupt-parent = <&qeic>; |
| 386 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 387 |
rx-clock-name = "none"; |
| 388 |
tx-clock-name = "clk16"; |
| 389 |
phy-handle = <&phy_eth2>; |
| 390 |
phy-connection-type = "rmii"; |
| 391 |
pio-handle = <&pio_ucc6>; |
| 392 |
}; |
| 393 |
|
| 394 |
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */ |
| 395 |
enet_eth3: ucc@2600 { |
| 396 |
device_type = "network"; |
| 397 |
compatible = "ucc_geth"; |
| 398 |
cell-index = <7>; |
| 399 |
reg = <0x2600 0x200>; |
| 400 |
interrupts = <42>; |
| 401 |
interrupt-parent = <&qeic>; |
| 402 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 403 |
rx-clock-name = "none"; |
| 404 |
tx-clock-name = "clk16"; |
| 405 |
phy-handle = <&phy_eth3>; |
| 406 |
phy-connection-type = "rmii"; |
| 407 |
pio-handle = <&pio_ucc7>; |
| 408 |
}; |
| 409 |
|
| 410 |
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */ |
| 411 |
enet_eth4: ucc@3600 { |
| 412 |
device_type = "network"; |
| 413 |
compatible = "ucc_geth"; |
| 414 |
cell-index = <8>; |
| 415 |
reg = <0x3600 0x200>; |
| 416 |
interrupts = <43>; |
| 417 |
interrupt-parent = <&qeic>; |
| 418 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 419 |
rx-clock-name = "none"; |
| 420 |
tx-clock-name = "clk16"; |
| 421 |
phy-handle = <&phy_eth4>; |
| 422 |
phy-connection-type = "rmii"; |
| 423 |
pio-handle = <&pio_ucc8>; |
| 424 |
}; |
| 425 |
|
| 426 |
mdio@3320 { |
| 427 |
#address-cells = <1>; |
| 428 |
#size-cells = <0>; |
| 429 |
reg = <0x3320 0x18>; |
| 430 |
compatible = "fsl,ucc-mdio"; |
| 431 |
|
| 432 |
/* Piggy2 (UCC4, MDIO 0x00, RMII) */ |
| 433 |
phy_piggy2: ethernet-phy@0 { |
| 434 |
reg = <0x0>; |
| 435 |
}; |
| 436 |
|
| 437 |
/* Eth-1 (UCC5, MDIO 0x08, RMII) */ |
| 438 |
phy_eth1: ethernet-phy@8 { |
| 439 |
reg = <0x08>; |
| 440 |
}; |
| 441 |
|
| 442 |
/* Eth-2 (UCC6, MDIO 0x09, RMII) */ |
| 443 |
phy_eth2: ethernet-phy@9 { |
| 444 |
reg = <0x09>; |
| 445 |
}; |
| 446 |
|
| 447 |
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */ |
| 448 |
phy_eth3: ethernet-phy@a { |
| 449 |
reg = <0x0a>; |
| 450 |
}; |
| 451 |
|
| 452 |
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */ |
| 453 |
phy_eth4: ethernet-phy@b { |
| 454 |
reg = <0x0b>; |
| 455 |
}; |
| 456 |
|
| 457 |
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ |
| 458 |
phy_estar1: ethernet-phy@10 { |
| 459 |
interrupt-parent = <&ipic>; |
| 460 |
interrupts = <17 0x8>; |
| 461 |
reg = <0x10>; |
| 462 |
}; |
| 463 |
|
| 464 |
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ |
| 465 |
phy_estar2: ethernet-phy@11 { |
| 466 |
interrupt-parent = <&ipic>; |
| 467 |
interrupts = <18 0x8>; |
| 468 |
reg = <0x11>; |
| 469 |
}; |
| 470 |
}; |
| 471 |
|
| 472 |
qeic: interrupt-controller@80 { |
| 473 |
interrupt-controller; |
| 474 |
compatible = "fsl,qe-ic"; |
| 475 |
#address-cells = <0>; |
| 476 |
#interrupt-cells = <1>; |
| 477 |
reg = <0x80 0x80>; |
| 478 |
big-endian; |
| 479 |
interrupts = < |
| 480 |
32 0x8 |
| 481 |
33 0x8 |
| 482 |
34 0x8 |
| 483 |
35 0x8 |
| 484 |
40 0x8 |
| 485 |
41 0x8 |
| 486 |
42 0x8 |
| 487 |
43 0x8 |
| 488 |
>; |
| 489 |
interrupt-parent = <&ipic>; |
| 490 |
}; |
| 491 |
}; |
| 492 |
}; |
| 493 |
|
| 494 |
localbus@e0005000 { |
| 495 |
#address-cells = <2>; |
| 496 |
#size-cells = <1>; |
| 497 |
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", |
| 498 |
"simple-bus"; |
| 499 |
reg = <0xe0005000 0xd8>; |
| 500 |
ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */ |
| 501 |
1 0 0xe8000000 0x01000000 /* LB 1 */ |
| 502 |
3 0 0xa0000000 0x10000000>; /* LB 3 */ |
| 503 |
|
| 504 |
flash@0,0 { |
| 505 |
compatible = "cfi-flash"; |
| 506 |
reg = <0 0 0x04000000>; |
| 507 |
#address-cells = <1>; |
| 508 |
#size-cells = <1>; |
| 509 |
bank-width = <2>; |
| 510 |
partition@0 { /* 768KB */ |
| 511 |
label = "u-boot"; |
| 512 |
reg = <0 0xC0000>; |
| 513 |
}; |
| 514 |
partition@c0000 { /* 128KB */ |
| 515 |
label = "env"; |
| 516 |
reg = <0xC0000 0x20000>; |
| 517 |
}; |
| 518 |
partition@e0000 { /* 128KB */ |
| 519 |
label = "envred"; |
| 520 |
reg = <0xE0000 0x20000>; |
| 521 |
}; |
| 522 |
partition@100000 { /* 64512KB */ |
| 523 |
label = "ubi0"; |
| 524 |
reg = <0x100000 0x3F00000>; |
| 525 |
}; |
| 526 |
}; |
| 527 |
}; |
| 528 |
}; |