| 1 |
/* |
| 2 |
* Device Tree Source for IBM Embedded PPC 476 Platform |
| 3 |
* |
| 4 |
* Copyright 2010 Torez Smith, IBM Corporation. |
| 5 |
* |
| 6 |
* Based on earlier code: |
| 7 |
* Copyright (c) 2006, 2007 IBM Corp. |
| 8 |
* Josh Boyer <[email protected]>, David Gibson <[email protected]> |
| 9 |
* |
| 10 |
* This file is licensed under the terms of the GNU General Public |
| 11 |
* License version 2. This program is licensed "as is" without |
| 12 |
* any warranty of any kind, whether express or implied. |
| 13 |
*/ |
| 14 |
|
| 15 |
/dts-v1/; |
| 16 |
|
| 17 |
/memreserve/ 0x01f00000 0x00100000; |
| 18 |
|
| 19 |
/ { |
| 20 |
#address-cells = <2>; |
| 21 |
#size-cells = <1>; |
| 22 |
model = "ibm,iss-4xx"; |
| 23 |
compatible = "ibm,iss-4xx"; |
| 24 |
dcr-parent = <&{/cpus/cpu@0}>; |
| 25 |
|
| 26 |
aliases { |
| 27 |
serial0 = &UART0; |
| 28 |
}; |
| 29 |
|
| 30 |
cpus { |
| 31 |
#address-cells = <1>; |
| 32 |
#size-cells = <0>; |
| 33 |
|
| 34 |
cpu@0 { |
| 35 |
device_type = "cpu"; |
| 36 |
model = "PowerPC,4xx"; // real CPU changed in sim |
| 37 |
reg = <0>; |
| 38 |
clock-frequency = <100000000>; // 100Mhz :-) |
| 39 |
timebase-frequency = <100000000>; |
| 40 |
i-cache-line-size = <32>; |
| 41 |
d-cache-line-size = <32>; |
| 42 |
i-cache-size = <32768>; |
| 43 |
d-cache-size = <32768>; |
| 44 |
dcr-controller; |
| 45 |
dcr-access-method = "native"; |
| 46 |
status = "okay"; |
| 47 |
}; |
| 48 |
cpu@1 { |
| 49 |
device_type = "cpu"; |
| 50 |
model = "PowerPC,4xx"; // real CPU changed in sim |
| 51 |
reg = <1>; |
| 52 |
clock-frequency = <100000000>; // 100Mhz :-) |
| 53 |
timebase-frequency = <100000000>; |
| 54 |
i-cache-line-size = <32>; |
| 55 |
d-cache-line-size = <32>; |
| 56 |
i-cache-size = <32768>; |
| 57 |
d-cache-size = <32768>; |
| 58 |
dcr-controller; |
| 59 |
dcr-access-method = "native"; |
| 60 |
status = "disabled"; |
| 61 |
enable-method = "spin-table"; |
| 62 |
cpu-release-addr = <0 0x01f00100>; |
| 63 |
}; |
| 64 |
cpu@2 { |
| 65 |
device_type = "cpu"; |
| 66 |
model = "PowerPC,4xx"; // real CPU changed in sim |
| 67 |
reg = <2>; |
| 68 |
clock-frequency = <100000000>; // 100Mhz :-) |
| 69 |
timebase-frequency = <100000000>; |
| 70 |
i-cache-line-size = <32>; |
| 71 |
d-cache-line-size = <32>; |
| 72 |
i-cache-size = <32768>; |
| 73 |
d-cache-size = <32768>; |
| 74 |
dcr-controller; |
| 75 |
dcr-access-method = "native"; |
| 76 |
status = "disabled"; |
| 77 |
enable-method = "spin-table"; |
| 78 |
cpu-release-addr = <0 0x01f00200>; |
| 79 |
}; |
| 80 |
cpu@3 { |
| 81 |
device_type = "cpu"; |
| 82 |
model = "PowerPC,4xx"; // real CPU changed in sim |
| 83 |
reg = <3>; |
| 84 |
clock-frequency = <100000000>; // 100Mhz :-) |
| 85 |
timebase-frequency = <100000000>; |
| 86 |
i-cache-line-size = <32>; |
| 87 |
d-cache-line-size = <32>; |
| 88 |
i-cache-size = <32768>; |
| 89 |
d-cache-size = <32768>; |
| 90 |
dcr-controller; |
| 91 |
dcr-access-method = "native"; |
| 92 |
status = "disabled"; |
| 93 |
enable-method = "spin-table"; |
| 94 |
cpu-release-addr = <0 0x01f00300>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
memory { |
| 99 |
device_type = "memory"; |
| 100 |
reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage |
| 101 |
|
| 102 |
}; |
| 103 |
|
| 104 |
MPIC: interrupt-controller { |
| 105 |
compatible = "chrp,open-pic"; |
| 106 |
interrupt-controller; |
| 107 |
dcr-reg = <0xffc00000 0x00030000>; |
| 108 |
#address-cells = <0>; |
| 109 |
#size-cells = <0>; |
| 110 |
#interrupt-cells = <2>; |
| 111 |
|
| 112 |
}; |
| 113 |
|
| 114 |
plb { |
| 115 |
compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ |
| 116 |
#address-cells = <2>; |
| 117 |
#size-cells = <1>; |
| 118 |
ranges; |
| 119 |
clock-frequency = <0>; // Filled in by zImage |
| 120 |
|
| 121 |
POB0: opb { |
| 122 |
compatible = "ibm,opb-4xx", "ibm,opb"; |
| 123 |
#address-cells = <1>; |
| 124 |
#size-cells = <1>; |
| 125 |
/* Wish there was a nicer way of specifying a full 32-bit |
| 126 |
range */ |
| 127 |
ranges = <0x00000000 0x00000001 0x00000000 0x80000000 |
| 128 |
0x80000000 0x00000001 0x80000000 0x80000000>; |
| 129 |
clock-frequency = <0>; // Filled in by zImage |
| 130 |
UART0: serial@40000200 { |
| 131 |
device_type = "serial"; |
| 132 |
compatible = "ns16550a"; |
| 133 |
reg = <0x40000200 0x00000008>; |
| 134 |
virtual-reg = <0xe0000200>; |
| 135 |
clock-frequency = <11059200>; |
| 136 |
current-speed = <115200>; |
| 137 |
interrupt-parent = <&MPIC>; |
| 138 |
interrupts = <0x0 0x2>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
nvrtc { |
| 144 |
compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; |
| 145 |
reg = <0 0xEF703000 0x2000>; |
| 146 |
}; |
| 147 |
iss-block { |
| 148 |
compatible = "ibm,iss-sim-block-device"; |
| 149 |
reg = <0 0xEF701000 0x1000>; |
| 150 |
}; |
| 151 |
|
| 152 |
chosen { |
| 153 |
stdout-path = "/plb/opb/serial@40000200"; |
| 154 |
}; |
| 155 |
}; |