| 1 |
/* |
| 2 |
* Device Tree Source for AMCC Glacier (460GT) |
| 3 |
* |
| 4 |
* Copyright 2008-2010 DENX Software Engineering, Stefan Roese <[email protected]> |
| 5 |
* |
| 6 |
* This file is licensed under the terms of the GNU General Public |
| 7 |
* License version 2. This program is licensed "as is" without |
| 8 |
* any warranty of any kind, whether express or implied. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
/ { |
| 14 |
#address-cells = <2>; |
| 15 |
#size-cells = <1>; |
| 16 |
model = "amcc,glacier"; |
| 17 |
compatible = "amcc,glacier"; |
| 18 |
dcr-parent = <&{/cpus/cpu@0}>; |
| 19 |
|
| 20 |
aliases { |
| 21 |
ethernet0 = &EMAC0; |
| 22 |
ethernet1 = &EMAC1; |
| 23 |
ethernet2 = &EMAC2; |
| 24 |
ethernet3 = &EMAC3; |
| 25 |
serial0 = &UART0; |
| 26 |
serial1 = &UART1; |
| 27 |
}; |
| 28 |
|
| 29 |
cpus { |
| 30 |
#address-cells = <1>; |
| 31 |
#size-cells = <0>; |
| 32 |
|
| 33 |
cpu@0 { |
| 34 |
device_type = "cpu"; |
| 35 |
model = "PowerPC,460GT"; |
| 36 |
reg = <0x00000000>; |
| 37 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 38 |
timebase-frequency = <0>; /* Filled in by U-Boot */ |
| 39 |
i-cache-line-size = <32>; |
| 40 |
d-cache-line-size = <32>; |
| 41 |
i-cache-size = <32768>; |
| 42 |
d-cache-size = <32768>; |
| 43 |
dcr-controller; |
| 44 |
dcr-access-method = "native"; |
| 45 |
next-level-cache = <&L2C0>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
memory { |
| 50 |
device_type = "memory"; |
| 51 |
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ |
| 52 |
}; |
| 53 |
|
| 54 |
UIC0: interrupt-controller0 { |
| 55 |
compatible = "ibm,uic-460gt","ibm,uic"; |
| 56 |
interrupt-controller; |
| 57 |
cell-index = <0>; |
| 58 |
dcr-reg = <0x0c0 0x009>; |
| 59 |
#address-cells = <0>; |
| 60 |
#size-cells = <0>; |
| 61 |
#interrupt-cells = <2>; |
| 62 |
}; |
| 63 |
|
| 64 |
UIC1: interrupt-controller1 { |
| 65 |
compatible = "ibm,uic-460gt","ibm,uic"; |
| 66 |
interrupt-controller; |
| 67 |
cell-index = <1>; |
| 68 |
dcr-reg = <0x0d0 0x009>; |
| 69 |
#address-cells = <0>; |
| 70 |
#size-cells = <0>; |
| 71 |
#interrupt-cells = <2>; |
| 72 |
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ |
| 73 |
interrupt-parent = <&UIC0>; |
| 74 |
}; |
| 75 |
|
| 76 |
UIC2: interrupt-controller2 { |
| 77 |
compatible = "ibm,uic-460gt","ibm,uic"; |
| 78 |
interrupt-controller; |
| 79 |
cell-index = <2>; |
| 80 |
dcr-reg = <0x0e0 0x009>; |
| 81 |
#address-cells = <0>; |
| 82 |
#size-cells = <0>; |
| 83 |
#interrupt-cells = <2>; |
| 84 |
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ |
| 85 |
interrupt-parent = <&UIC0>; |
| 86 |
}; |
| 87 |
|
| 88 |
UIC3: interrupt-controller3 { |
| 89 |
compatible = "ibm,uic-460gt","ibm,uic"; |
| 90 |
interrupt-controller; |
| 91 |
cell-index = <3>; |
| 92 |
dcr-reg = <0x0f0 0x009>; |
| 93 |
#address-cells = <0>; |
| 94 |
#size-cells = <0>; |
| 95 |
#interrupt-cells = <2>; |
| 96 |
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ |
| 97 |
interrupt-parent = <&UIC0>; |
| 98 |
}; |
| 99 |
|
| 100 |
SDR0: sdr { |
| 101 |
compatible = "ibm,sdr-460gt"; |
| 102 |
dcr-reg = <0x00e 0x002>; |
| 103 |
}; |
| 104 |
|
| 105 |
CPR0: cpr { |
| 106 |
compatible = "ibm,cpr-460gt"; |
| 107 |
dcr-reg = <0x00c 0x002>; |
| 108 |
}; |
| 109 |
|
| 110 |
L2C0: l2c { |
| 111 |
compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; |
| 112 |
dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ |
| 113 |
0x030 0x008>; /* L2 cache DCR's */ |
| 114 |
cache-line-size = <32>; /* 32 bytes */ |
| 115 |
cache-size = <262144>; /* L2, 256K */ |
| 116 |
interrupt-parent = <&UIC1>; |
| 117 |
interrupts = <11 1>; |
| 118 |
}; |
| 119 |
|
| 120 |
plb { |
| 121 |
compatible = "ibm,plb-460gt", "ibm,plb4"; |
| 122 |
#address-cells = <2>; |
| 123 |
#size-cells = <1>; |
| 124 |
ranges; |
| 125 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 126 |
|
| 127 |
SDRAM0: sdram { |
| 128 |
compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; |
| 129 |
dcr-reg = <0x010 0x002>; |
| 130 |
}; |
| 131 |
|
| 132 |
CRYPTO: crypto@180000 { |
| 133 |
compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto", |
| 134 |
"amcc,ppc4xx-crypto"; |
| 135 |
reg = <4 0x00180000 0x80400>; |
| 136 |
interrupt-parent = <&UIC0>; |
| 137 |
interrupts = <0x1d 0x4>; |
| 138 |
}; |
| 139 |
|
| 140 |
HWRNG: hwrng@110000 { |
| 141 |
compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; |
| 142 |
reg = <4 0x00110000 0x50>; |
| 143 |
}; |
| 144 |
|
| 145 |
MAL0: mcmal { |
| 146 |
compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; |
| 147 |
dcr-reg = <0x180 0x062>; |
| 148 |
num-tx-chans = <4>; |
| 149 |
num-rx-chans = <32>; |
| 150 |
#address-cells = <0>; |
| 151 |
#size-cells = <0>; |
| 152 |
interrupt-parent = <&UIC2>; |
| 153 |
interrupts = < /*TXEOB*/ 0x6 0x4 |
| 154 |
/*RXEOB*/ 0x7 0x4 |
| 155 |
/*SERR*/ 0x3 0x4 |
| 156 |
/*TXDE*/ 0x4 0x4 |
| 157 |
/*RXDE*/ 0x5 0x4>; |
| 158 |
desc-base-addr-high = <0x8>; |
| 159 |
}; |
| 160 |
|
| 161 |
POB0: opb { |
| 162 |
compatible = "ibm,opb-460gt", "ibm,opb"; |
| 163 |
#address-cells = <1>; |
| 164 |
#size-cells = <1>; |
| 165 |
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; |
| 166 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 167 |
|
| 168 |
EBC0: ebc { |
| 169 |
compatible = "ibm,ebc-460gt", "ibm,ebc"; |
| 170 |
dcr-reg = <0x012 0x002>; |
| 171 |
#address-cells = <2>; |
| 172 |
#size-cells = <1>; |
| 173 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 174 |
/* ranges property is supplied by U-Boot */ |
| 175 |
interrupts = <0x6 0x4>; |
| 176 |
interrupt-parent = <&UIC1>; |
| 177 |
|
| 178 |
nor_flash@0,0 { |
| 179 |
compatible = "amd,s29gl512n", "cfi-flash"; |
| 180 |
bank-width = <2>; |
| 181 |
reg = <0x00000000 0x00000000 0x04000000>; |
| 182 |
#address-cells = <1>; |
| 183 |
#size-cells = <1>; |
| 184 |
partition@0 { |
| 185 |
label = "kernel"; |
| 186 |
reg = <0x00000000 0x001e0000>; |
| 187 |
}; |
| 188 |
partition@1e0000 { |
| 189 |
label = "dtb"; |
| 190 |
reg = <0x001e0000 0x00020000>; |
| 191 |
}; |
| 192 |
partition@200000 { |
| 193 |
label = "ramdisk"; |
| 194 |
reg = <0x00200000 0x01400000>; |
| 195 |
}; |
| 196 |
partition@1600000 { |
| 197 |
label = "jffs2"; |
| 198 |
reg = <0x01600000 0x00400000>; |
| 199 |
}; |
| 200 |
partition@1a00000 { |
| 201 |
label = "user"; |
| 202 |
reg = <0x01a00000 0x02560000>; |
| 203 |
}; |
| 204 |
partition@3f60000 { |
| 205 |
label = "env"; |
| 206 |
reg = <0x03f60000 0x00040000>; |
| 207 |
}; |
| 208 |
partition@3fa0000 { |
| 209 |
label = "u-boot"; |
| 210 |
reg = <0x03fa0000 0x00060000>; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
ndfc@3,0 { |
| 215 |
compatible = "ibm,ndfc"; |
| 216 |
reg = <0x00000003 0x00000000 0x00002000>; |
| 217 |
ccr = <0x00001000>; |
| 218 |
bank-settings = <0x80002222>; |
| 219 |
#address-cells = <1>; |
| 220 |
#size-cells = <1>; |
| 221 |
|
| 222 |
nand { |
| 223 |
#address-cells = <1>; |
| 224 |
#size-cells = <1>; |
| 225 |
|
| 226 |
partition@0 { |
| 227 |
label = "u-boot"; |
| 228 |
reg = <0x00000000 0x00100000>; |
| 229 |
}; |
| 230 |
partition@100000 { |
| 231 |
label = "user"; |
| 232 |
reg = <0x00000000 0x03f00000>; |
| 233 |
}; |
| 234 |
}; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
UART0: serial@ef600300 { |
| 239 |
device_type = "serial"; |
| 240 |
compatible = "ns16550"; |
| 241 |
reg = <0xef600300 0x00000008>; |
| 242 |
virtual-reg = <0xef600300>; |
| 243 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 244 |
current-speed = <0>; /* Filled in by U-Boot */ |
| 245 |
interrupt-parent = <&UIC1>; |
| 246 |
interrupts = <0x1 0x4>; |
| 247 |
}; |
| 248 |
|
| 249 |
UART1: serial@ef600400 { |
| 250 |
device_type = "serial"; |
| 251 |
compatible = "ns16550"; |
| 252 |
reg = <0xef600400 0x00000008>; |
| 253 |
virtual-reg = <0xef600400>; |
| 254 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 255 |
current-speed = <0>; /* Filled in by U-Boot */ |
| 256 |
interrupt-parent = <&UIC0>; |
| 257 |
interrupts = <0x1 0x4>; |
| 258 |
}; |
| 259 |
|
| 260 |
UART2: serial@ef600500 { |
| 261 |
device_type = "serial"; |
| 262 |
compatible = "ns16550"; |
| 263 |
reg = <0xef600500 0x00000008>; |
| 264 |
virtual-reg = <0xef600500>; |
| 265 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 266 |
current-speed = <0>; /* Filled in by U-Boot */ |
| 267 |
interrupt-parent = <&UIC1>; |
| 268 |
interrupts = <28 0x4>; |
| 269 |
}; |
| 270 |
|
| 271 |
UART3: serial@ef600600 { |
| 272 |
device_type = "serial"; |
| 273 |
compatible = "ns16550"; |
| 274 |
reg = <0xef600600 0x00000008>; |
| 275 |
virtual-reg = <0xef600600>; |
| 276 |
clock-frequency = <0>; /* Filled in by U-Boot */ |
| 277 |
current-speed = <0>; /* Filled in by U-Boot */ |
| 278 |
interrupt-parent = <&UIC1>; |
| 279 |
interrupts = <29 0x4>; |
| 280 |
}; |
| 281 |
|
| 282 |
IIC0: i2c@ef600700 { |
| 283 |
compatible = "ibm,iic-460gt", "ibm,iic"; |
| 284 |
reg = <0xef600700 0x00000014>; |
| 285 |
interrupt-parent = <&UIC0>; |
| 286 |
interrupts = <0x2 0x4>; |
| 287 |
#address-cells = <1>; |
| 288 |
#size-cells = <0>; |
| 289 |
rtc@68 { |
| 290 |
compatible = "st,m41t80"; |
| 291 |
reg = <0x68>; |
| 292 |
interrupt-parent = <&UIC2>; |
| 293 |
interrupts = <0x19 0x8>; |
| 294 |
}; |
| 295 |
sttm@48 { |
| 296 |
compatible = "ad,ad7414"; |
| 297 |
reg = <0x48>; |
| 298 |
interrupt-parent = <&UIC1>; |
| 299 |
interrupts = <0x14 0x8>; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
IIC1: i2c@ef600800 { |
| 304 |
compatible = "ibm,iic-460gt", "ibm,iic"; |
| 305 |
reg = <0xef600800 0x00000014>; |
| 306 |
interrupt-parent = <&UIC0>; |
| 307 |
interrupts = <0x3 0x4>; |
| 308 |
}; |
| 309 |
|
| 310 |
ZMII0: emac-zmii@ef600d00 { |
| 311 |
compatible = "ibm,zmii-460gt", "ibm,zmii"; |
| 312 |
reg = <0xef600d00 0x0000000c>; |
| 313 |
}; |
| 314 |
|
| 315 |
RGMII0: emac-rgmii@ef601500 { |
| 316 |
compatible = "ibm,rgmii-460gt", "ibm,rgmii"; |
| 317 |
reg = <0xef601500 0x00000008>; |
| 318 |
has-mdio; |
| 319 |
}; |
| 320 |
|
| 321 |
RGMII1: emac-rgmii@ef601600 { |
| 322 |
compatible = "ibm,rgmii-460gt", "ibm,rgmii"; |
| 323 |
reg = <0xef601600 0x00000008>; |
| 324 |
has-mdio; |
| 325 |
}; |
| 326 |
|
| 327 |
TAH0: emac-tah@ef601350 { |
| 328 |
compatible = "ibm,tah-460gt", "ibm,tah"; |
| 329 |
reg = <0xef601350 0x00000030>; |
| 330 |
}; |
| 331 |
|
| 332 |
TAH1: emac-tah@ef601450 { |
| 333 |
compatible = "ibm,tah-460gt", "ibm,tah"; |
| 334 |
reg = <0xef601450 0x00000030>; |
| 335 |
}; |
| 336 |
|
| 337 |
EMAC0: ethernet@ef600e00 { |
| 338 |
device_type = "network"; |
| 339 |
compatible = "ibm,emac-460gt", "ibm,emac4sync"; |
| 340 |
interrupt-parent = <&EMAC0>; |
| 341 |
interrupts = <0x0 0x1>; |
| 342 |
#interrupt-cells = <1>; |
| 343 |
#address-cells = <0>; |
| 344 |
#size-cells = <0>; |
| 345 |
interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 |
| 346 |
/*Wake*/ 0x1 &UIC2 0x14 0x4>; |
| 347 |
reg = <0xef600e00 0x000000c4>; |
| 348 |
local-mac-address = [000000000000]; /* Filled in by U-Boot */ |
| 349 |
mal-device = <&MAL0>; |
| 350 |
mal-tx-channel = <0>; |
| 351 |
mal-rx-channel = <0>; |
| 352 |
cell-index = <0>; |
| 353 |
max-frame-size = <9000>; |
| 354 |
rx-fifo-size = <4096>; |
| 355 |
tx-fifo-size = <2048>; |
| 356 |
rx-fifo-size-gige = <16384>; |
| 357 |
phy-mode = "rgmii"; |
| 358 |
phy-map = <0x00000000>; |
| 359 |
rgmii-device = <&RGMII0>; |
| 360 |
rgmii-channel = <0>; |
| 361 |
tah-device = <&TAH0>; |
| 362 |
tah-channel = <0>; |
| 363 |
has-inverted-stacr-oc; |
| 364 |
has-new-stacr-staopc; |
| 365 |
}; |
| 366 |
|
| 367 |
EMAC1: ethernet@ef600f00 { |
| 368 |
device_type = "network"; |
| 369 |
compatible = "ibm,emac-460gt", "ibm,emac4sync"; |
| 370 |
interrupt-parent = <&EMAC1>; |
| 371 |
interrupts = <0x0 0x1>; |
| 372 |
#interrupt-cells = <1>; |
| 373 |
#address-cells = <0>; |
| 374 |
#size-cells = <0>; |
| 375 |
interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 |
| 376 |
/*Wake*/ 0x1 &UIC2 0x15 0x4>; |
| 377 |
reg = <0xef600f00 0x000000c4>; |
| 378 |
local-mac-address = [000000000000]; /* Filled in by U-Boot */ |
| 379 |
mal-device = <&MAL0>; |
| 380 |
mal-tx-channel = <1>; |
| 381 |
mal-rx-channel = <8>; |
| 382 |
cell-index = <1>; |
| 383 |
max-frame-size = <9000>; |
| 384 |
rx-fifo-size = <4096>; |
| 385 |
tx-fifo-size = <2048>; |
| 386 |
rx-fifo-size-gige = <16384>; |
| 387 |
phy-mode = "rgmii"; |
| 388 |
phy-map = <0x00000000>; |
| 389 |
rgmii-device = <&RGMII0>; |
| 390 |
rgmii-channel = <1>; |
| 391 |
tah-device = <&TAH1>; |
| 392 |
tah-channel = <1>; |
| 393 |
has-inverted-stacr-oc; |
| 394 |
has-new-stacr-staopc; |
| 395 |
mdio-device = <&EMAC0>; |
| 396 |
}; |
| 397 |
|
| 398 |
EMAC2: ethernet@ef601100 { |
| 399 |
device_type = "network"; |
| 400 |
compatible = "ibm,emac-460gt", "ibm,emac4sync"; |
| 401 |
interrupt-parent = <&EMAC2>; |
| 402 |
interrupts = <0x0 0x1>; |
| 403 |
#interrupt-cells = <1>; |
| 404 |
#address-cells = <0>; |
| 405 |
#size-cells = <0>; |
| 406 |
interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 |
| 407 |
/*Wake*/ 0x1 &UIC2 0x16 0x4>; |
| 408 |
reg = <0xef601100 0x000000c4>; |
| 409 |
local-mac-address = [000000000000]; /* Filled in by U-Boot */ |
| 410 |
mal-device = <&MAL0>; |
| 411 |
mal-tx-channel = <2>; |
| 412 |
mal-rx-channel = <16>; |
| 413 |
cell-index = <2>; |
| 414 |
max-frame-size = <9000>; |
| 415 |
rx-fifo-size = <4096>; |
| 416 |
tx-fifo-size = <2048>; |
| 417 |
rx-fifo-size-gige = <16384>; |
| 418 |
tx-fifo-size-gige = <16384>; /* emac2&3 only */ |
| 419 |
phy-mode = "rgmii"; |
| 420 |
phy-map = <0x00000000>; |
| 421 |
rgmii-device = <&RGMII1>; |
| 422 |
rgmii-channel = <0>; |
| 423 |
has-inverted-stacr-oc; |
| 424 |
has-new-stacr-staopc; |
| 425 |
mdio-device = <&EMAC0>; |
| 426 |
}; |
| 427 |
|
| 428 |
EMAC3: ethernet@ef601200 { |
| 429 |
device_type = "network"; |
| 430 |
compatible = "ibm,emac-460gt", "ibm,emac4sync"; |
| 431 |
interrupt-parent = <&EMAC3>; |
| 432 |
interrupts = <0x0 0x1>; |
| 433 |
#interrupt-cells = <1>; |
| 434 |
#address-cells = <0>; |
| 435 |
#size-cells = <0>; |
| 436 |
interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4 |
| 437 |
/*Wake*/ 0x1 &UIC2 0x17 0x4>; |
| 438 |
reg = <0xef601200 0x000000c4>; |
| 439 |
local-mac-address = [000000000000]; /* Filled in by U-Boot */ |
| 440 |
mal-device = <&MAL0>; |
| 441 |
mal-tx-channel = <3>; |
| 442 |
mal-rx-channel = <24>; |
| 443 |
cell-index = <3>; |
| 444 |
max-frame-size = <9000>; |
| 445 |
rx-fifo-size = <4096>; |
| 446 |
tx-fifo-size = <2048>; |
| 447 |
rx-fifo-size-gige = <16384>; |
| 448 |
tx-fifo-size-gige = <16384>; /* emac2&3 only */ |
| 449 |
phy-mode = "rgmii"; |
| 450 |
phy-map = <0x00000000>; |
| 451 |
rgmii-device = <&RGMII1>; |
| 452 |
rgmii-channel = <1>; |
| 453 |
has-inverted-stacr-oc; |
| 454 |
has-new-stacr-staopc; |
| 455 |
mdio-device = <&EMAC0>; |
| 456 |
}; |
| 457 |
}; |
| 458 |
|
| 459 |
PCIX0: pci@c0ec00000 { |
| 460 |
device_type = "pci"; |
| 461 |
#interrupt-cells = <1>; |
| 462 |
#size-cells = <2>; |
| 463 |
#address-cells = <3>; |
| 464 |
compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; |
| 465 |
primary; |
| 466 |
large-inbound-windows; |
| 467 |
enable-msi-hole; |
| 468 |
reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ |
| 469 |
0x00000000 0x00000000 0x00000000 /* no IACK cycles */ |
| 470 |
0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ |
| 471 |
0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ |
| 472 |
0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ |
| 473 |
|
| 474 |
/* Outbound ranges, one memory and one IO, |
| 475 |
* later cannot be changed |
| 476 |
*/ |
| 477 |
ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 |
| 478 |
0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 |
| 479 |
0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; |
| 480 |
|
| 481 |
/* Inbound 2GB range starting at 0 */ |
| 482 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| 483 |
|
| 484 |
/* This drives busses 0 to 0x3f */ |
| 485 |
bus-range = <0x0 0x3f>; |
| 486 |
|
| 487 |
/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ |
| 488 |
interrupt-map-mask = <0x0 0x0 0x0 0x0>; |
| 489 |
interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; |
| 490 |
}; |
| 491 |
|
| 492 |
PCIE0: pcie@d00000000 { |
| 493 |
device_type = "pci"; |
| 494 |
#interrupt-cells = <1>; |
| 495 |
#size-cells = <2>; |
| 496 |
#address-cells = <3>; |
| 497 |
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; |
| 498 |
primary; |
| 499 |
port = <0x0>; /* port number */ |
| 500 |
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ |
| 501 |
0x0000000c 0x08010000 0x00001000>; /* Registers */ |
| 502 |
dcr-reg = <0x100 0x020>; |
| 503 |
sdr-base = <0x300>; |
| 504 |
|
| 505 |
/* Outbound ranges, one memory and one IO, |
| 506 |
* later cannot be changed |
| 507 |
*/ |
| 508 |
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 |
| 509 |
0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 |
| 510 |
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; |
| 511 |
|
| 512 |
/* Inbound 2GB range starting at 0 */ |
| 513 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| 514 |
|
| 515 |
/* This drives busses 40 to 0x7f */ |
| 516 |
bus-range = <0x40 0x7f>; |
| 517 |
|
| 518 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 519 |
* to invert PCIe legacy interrupts). |
| 520 |
* We are de-swizzling here because the numbers are actually for |
| 521 |
* port of the root complex virtual P2P bridge. But I want |
| 522 |
* to avoid putting a node for it in the tree, so the numbers |
| 523 |
* below are basically de-swizzled numbers. |
| 524 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 525 |
*/ |
| 526 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 527 |
interrupt-map = < |
| 528 |
0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ |
| 529 |
0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ |
| 530 |
0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ |
| 531 |
0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; |
| 532 |
}; |
| 533 |
|
| 534 |
PCIE1: pcie@d20000000 { |
| 535 |
device_type = "pci"; |
| 536 |
#interrupt-cells = <1>; |
| 537 |
#size-cells = <2>; |
| 538 |
#address-cells = <3>; |
| 539 |
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; |
| 540 |
primary; |
| 541 |
port = <0x1>; /* port number */ |
| 542 |
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ |
| 543 |
0x0000000c 0x08011000 0x00001000>; /* Registers */ |
| 544 |
dcr-reg = <0x120 0x020>; |
| 545 |
sdr-base = <0x340>; |
| 546 |
|
| 547 |
/* Outbound ranges, one memory and one IO, |
| 548 |
* later cannot be changed |
| 549 |
*/ |
| 550 |
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 |
| 551 |
0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 |
| 552 |
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; |
| 553 |
|
| 554 |
/* Inbound 2GB range starting at 0 */ |
| 555 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| 556 |
|
| 557 |
/* This drives busses 80 to 0xbf */ |
| 558 |
bus-range = <0x80 0xbf>; |
| 559 |
|
| 560 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 561 |
* to invert PCIe legacy interrupts). |
| 562 |
* We are de-swizzling here because the numbers are actually for |
| 563 |
* port of the root complex virtual P2P bridge. But I want |
| 564 |
* to avoid putting a node for it in the tree, so the numbers |
| 565 |
* below are basically de-swizzled numbers. |
| 566 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 567 |
*/ |
| 568 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 569 |
interrupt-map = < |
| 570 |
0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ |
| 571 |
0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ |
| 572 |
0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ |
| 573 |
0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; |
| 574 |
}; |
| 575 |
}; |
| 576 |
}; |