| 1 |
/* |
| 2 |
* T1040 Silicon/SoC Device Tree Source (post include) |
| 3 |
* |
| 4 |
* Copyright 2013 - 2014 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
#include <dt-bindings/thermal/thermal.h> |
| 36 |
|
| 37 |
&bman_fbpr { |
| 38 |
compatible = "fsl,bman-fbpr"; |
| 39 |
alloc-ranges = <0 0 0x10000 0>; |
| 40 |
}; |
| 41 |
|
| 42 |
&qman_fqd { |
| 43 |
compatible = "fsl,qman-fqd"; |
| 44 |
alloc-ranges = <0 0 0x10000 0>; |
| 45 |
}; |
| 46 |
|
| 47 |
&qman_pfdr { |
| 48 |
compatible = "fsl,qman-pfdr"; |
| 49 |
alloc-ranges = <0 0 0x10000 0>; |
| 50 |
}; |
| 51 |
|
| 52 |
&ifc { |
| 53 |
#address-cells = <2>; |
| 54 |
#size-cells = <1>; |
| 55 |
compatible = "fsl,ifc"; |
| 56 |
interrupts = <25 2 0 0>; |
| 57 |
}; |
| 58 |
|
| 59 |
&pci0 { |
| 60 |
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| 61 |
device_type = "pci"; |
| 62 |
#size-cells = <2>; |
| 63 |
#address-cells = <3>; |
| 64 |
bus-range = <0x0 0xff>; |
| 65 |
interrupts = <20 2 0 0>; |
| 66 |
fsl,iommu-parent = <&pamu0>; |
| 67 |
pcie@0 { |
| 68 |
reg = <0 0 0 0 0>; |
| 69 |
#interrupt-cells = <1>; |
| 70 |
#size-cells = <2>; |
| 71 |
#address-cells = <3>; |
| 72 |
device_type = "pci"; |
| 73 |
interrupts = <20 2 0 0>; |
| 74 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 75 |
interrupt-map = < |
| 76 |
/* IDSEL 0x0 */ |
| 77 |
0000 0 0 1 &mpic 40 1 0 0 |
| 78 |
0000 0 0 2 &mpic 1 1 0 0 |
| 79 |
0000 0 0 3 &mpic 2 1 0 0 |
| 80 |
0000 0 0 4 &mpic 3 1 0 0 |
| 81 |
>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
&pci1 { |
| 86 |
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| 87 |
device_type = "pci"; |
| 88 |
#size-cells = <2>; |
| 89 |
#address-cells = <3>; |
| 90 |
bus-range = <0 0xff>; |
| 91 |
interrupts = <21 2 0 0>; |
| 92 |
fsl,iommu-parent = <&pamu0>; |
| 93 |
pcie@0 { |
| 94 |
reg = <0 0 0 0 0>; |
| 95 |
#interrupt-cells = <1>; |
| 96 |
#size-cells = <2>; |
| 97 |
#address-cells = <3>; |
| 98 |
device_type = "pci"; |
| 99 |
interrupts = <21 2 0 0>; |
| 100 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 101 |
interrupt-map = < |
| 102 |
/* IDSEL 0x0 */ |
| 103 |
0000 0 0 1 &mpic 41 1 0 0 |
| 104 |
0000 0 0 2 &mpic 5 1 0 0 |
| 105 |
0000 0 0 3 &mpic 6 1 0 0 |
| 106 |
0000 0 0 4 &mpic 7 1 0 0 |
| 107 |
>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&pci2 { |
| 112 |
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| 113 |
device_type = "pci"; |
| 114 |
#size-cells = <2>; |
| 115 |
#address-cells = <3>; |
| 116 |
bus-range = <0x0 0xff>; |
| 117 |
interrupts = <22 2 0 0>; |
| 118 |
fsl,iommu-parent = <&pamu0>; |
| 119 |
pcie@0 { |
| 120 |
reg = <0 0 0 0 0>; |
| 121 |
#interrupt-cells = <1>; |
| 122 |
#size-cells = <2>; |
| 123 |
#address-cells = <3>; |
| 124 |
device_type = "pci"; |
| 125 |
interrupts = <22 2 0 0>; |
| 126 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 127 |
interrupt-map = < |
| 128 |
/* IDSEL 0x0 */ |
| 129 |
0000 0 0 1 &mpic 42 1 0 0 |
| 130 |
0000 0 0 2 &mpic 9 1 0 0 |
| 131 |
0000 0 0 3 &mpic 10 1 0 0 |
| 132 |
0000 0 0 4 &mpic 11 1 0 0 |
| 133 |
>; |
| 134 |
}; |
| 135 |
}; |
| 136 |
|
| 137 |
&pci3 { |
| 138 |
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| 139 |
device_type = "pci"; |
| 140 |
#size-cells = <2>; |
| 141 |
#address-cells = <3>; |
| 142 |
bus-range = <0x0 0xff>; |
| 143 |
interrupts = <23 2 0 0>; |
| 144 |
fsl,iommu-parent = <&pamu0>; |
| 145 |
pcie@0 { |
| 146 |
reg = <0 0 0 0 0>; |
| 147 |
#interrupt-cells = <1>; |
| 148 |
#size-cells = <2>; |
| 149 |
#address-cells = <3>; |
| 150 |
device_type = "pci"; |
| 151 |
interrupts = <23 2 0 0>; |
| 152 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 153 |
interrupt-map = < |
| 154 |
/* IDSEL 0x0 */ |
| 155 |
0000 0 0 1 &mpic 43 1 0 0 |
| 156 |
0000 0 0 2 &mpic 0 1 0 0 |
| 157 |
0000 0 0 3 &mpic 4 1 0 0 |
| 158 |
0000 0 0 4 &mpic 8 1 0 0 |
| 159 |
>; |
| 160 |
}; |
| 161 |
}; |
| 162 |
|
| 163 |
&dcsr { |
| 164 |
#address-cells = <1>; |
| 165 |
#size-cells = <1>; |
| 166 |
compatible = "fsl,dcsr", "simple-bus"; |
| 167 |
|
| 168 |
dcsr-epu@0 { |
| 169 |
compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu"; |
| 170 |
interrupts = <52 2 0 0 |
| 171 |
84 2 0 0 |
| 172 |
85 2 0 0>; |
| 173 |
reg = <0x0 0x1000>; |
| 174 |
}; |
| 175 |
dcsr-npc { |
| 176 |
compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc"; |
| 177 |
reg = <0x1000 0x1000 0x1002000 0x10000>; |
| 178 |
}; |
| 179 |
dcsr-nxc@2000 { |
| 180 |
compatible = "fsl,dcsr-nxc"; |
| 181 |
reg = <0x2000 0x1000>; |
| 182 |
}; |
| 183 |
dcsr-corenet { |
| 184 |
compatible = "fsl,dcsr-corenet"; |
| 185 |
reg = <0x8000 0x1000 0x1A000 0x1000>; |
| 186 |
}; |
| 187 |
dcsr-dpaa@9000 { |
| 188 |
compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa"; |
| 189 |
reg = <0x9000 0x1000>; |
| 190 |
}; |
| 191 |
dcsr-ocn@11000 { |
| 192 |
compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn"; |
| 193 |
reg = <0x11000 0x1000>; |
| 194 |
}; |
| 195 |
dcsr-ddr@12000 { |
| 196 |
compatible = "fsl,dcsr-ddr"; |
| 197 |
dev-handle = <&ddr1>; |
| 198 |
reg = <0x12000 0x1000>; |
| 199 |
}; |
| 200 |
dcsr-nal@18000 { |
| 201 |
compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal"; |
| 202 |
reg = <0x18000 0x1000>; |
| 203 |
}; |
| 204 |
dcsr-rcpm@22000 { |
| 205 |
compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm"; |
| 206 |
reg = <0x22000 0x1000>; |
| 207 |
}; |
| 208 |
dcsr-snpc@30000 { |
| 209 |
compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; |
| 210 |
reg = <0x30000 0x1000 0x1022000 0x10000>; |
| 211 |
}; |
| 212 |
dcsr-snpc@31000 { |
| 213 |
compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; |
| 214 |
reg = <0x31000 0x1000 0x1042000 0x10000>; |
| 215 |
}; |
| 216 |
dcsr-cpu-sb-proxy@100000 { |
| 217 |
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| 218 |
cpu-handle = <&cpu0>; |
| 219 |
reg = <0x100000 0x1000 0x101000 0x1000>; |
| 220 |
}; |
| 221 |
dcsr-cpu-sb-proxy@108000 { |
| 222 |
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| 223 |
cpu-handle = <&cpu1>; |
| 224 |
reg = <0x108000 0x1000 0x109000 0x1000>; |
| 225 |
}; |
| 226 |
dcsr-cpu-sb-proxy@110000 { |
| 227 |
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| 228 |
cpu-handle = <&cpu2>; |
| 229 |
reg = <0x110000 0x1000 0x111000 0x1000>; |
| 230 |
}; |
| 231 |
dcsr-cpu-sb-proxy@118000 { |
| 232 |
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| 233 |
cpu-handle = <&cpu3>; |
| 234 |
reg = <0x118000 0x1000 0x119000 0x1000>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
&bportals { |
| 239 |
#address-cells = <0x1>; |
| 240 |
#size-cells = <0x1>; |
| 241 |
compatible = "simple-bus"; |
| 242 |
|
| 243 |
bman-portal@0 { |
| 244 |
compatible = "fsl,bman-portal"; |
| 245 |
reg = <0x0 0x4000>, <0x1000000 0x1000>; |
| 246 |
interrupts = <105 2 0 0>; |
| 247 |
}; |
| 248 |
bman-portal@4000 { |
| 249 |
compatible = "fsl,bman-portal"; |
| 250 |
reg = <0x4000 0x4000>, <0x1001000 0x1000>; |
| 251 |
interrupts = <107 2 0 0>; |
| 252 |
}; |
| 253 |
bman-portal@8000 { |
| 254 |
compatible = "fsl,bman-portal"; |
| 255 |
reg = <0x8000 0x4000>, <0x1002000 0x1000>; |
| 256 |
interrupts = <109 2 0 0>; |
| 257 |
}; |
| 258 |
bman-portal@c000 { |
| 259 |
compatible = "fsl,bman-portal"; |
| 260 |
reg = <0xc000 0x4000>, <0x1003000 0x1000>; |
| 261 |
interrupts = <111 2 0 0>; |
| 262 |
}; |
| 263 |
bman-portal@10000 { |
| 264 |
compatible = "fsl,bman-portal"; |
| 265 |
reg = <0x10000 0x4000>, <0x1004000 0x1000>; |
| 266 |
interrupts = <113 2 0 0>; |
| 267 |
}; |
| 268 |
bman-portal@14000 { |
| 269 |
compatible = "fsl,bman-portal"; |
| 270 |
reg = <0x14000 0x4000>, <0x1005000 0x1000>; |
| 271 |
interrupts = <115 2 0 0>; |
| 272 |
}; |
| 273 |
bman-portal@18000 { |
| 274 |
compatible = "fsl,bman-portal"; |
| 275 |
reg = <0x18000 0x4000>, <0x1006000 0x1000>; |
| 276 |
interrupts = <117 2 0 0>; |
| 277 |
}; |
| 278 |
bman-portal@1c000 { |
| 279 |
compatible = "fsl,bman-portal"; |
| 280 |
reg = <0x1c000 0x4000>, <0x1007000 0x1000>; |
| 281 |
interrupts = <119 2 0 0>; |
| 282 |
}; |
| 283 |
bman-portal@20000 { |
| 284 |
compatible = "fsl,bman-portal"; |
| 285 |
reg = <0x20000 0x4000>, <0x1008000 0x1000>; |
| 286 |
interrupts = <121 2 0 0>; |
| 287 |
}; |
| 288 |
bman-portal@24000 { |
| 289 |
compatible = "fsl,bman-portal"; |
| 290 |
reg = <0x24000 0x4000>, <0x1009000 0x1000>; |
| 291 |
interrupts = <123 2 0 0>; |
| 292 |
}; |
| 293 |
}; |
| 294 |
|
| 295 |
&qportals { |
| 296 |
#address-cells = <0x1>; |
| 297 |
#size-cells = <0x1>; |
| 298 |
compatible = "simple-bus"; |
| 299 |
|
| 300 |
qportal0: qman-portal@0 { |
| 301 |
compatible = "fsl,qman-portal"; |
| 302 |
reg = <0x0 0x4000>, <0x1000000 0x1000>; |
| 303 |
interrupts = <104 0x2 0 0>; |
| 304 |
cell-index = <0x0>; |
| 305 |
}; |
| 306 |
qportal1: qman-portal@4000 { |
| 307 |
compatible = "fsl,qman-portal"; |
| 308 |
reg = <0x4000 0x4000>, <0x1001000 0x1000>; |
| 309 |
interrupts = <106 0x2 0 0>; |
| 310 |
cell-index = <0x1>; |
| 311 |
}; |
| 312 |
qportal2: qman-portal@8000 { |
| 313 |
compatible = "fsl,qman-portal"; |
| 314 |
reg = <0x8000 0x4000>, <0x1002000 0x1000>; |
| 315 |
interrupts = <108 0x2 0 0>; |
| 316 |
cell-index = <0x2>; |
| 317 |
}; |
| 318 |
qportal3: qman-portal@c000 { |
| 319 |
compatible = "fsl,qman-portal"; |
| 320 |
reg = <0xc000 0x4000>, <0x1003000 0x1000>; |
| 321 |
interrupts = <110 0x2 0 0>; |
| 322 |
cell-index = <0x3>; |
| 323 |
}; |
| 324 |
qportal4: qman-portal@10000 { |
| 325 |
compatible = "fsl,qman-portal"; |
| 326 |
reg = <0x10000 0x4000>, <0x1004000 0x1000>; |
| 327 |
interrupts = <112 0x2 0 0>; |
| 328 |
cell-index = <0x4>; |
| 329 |
}; |
| 330 |
qportal5: qman-portal@14000 { |
| 331 |
compatible = "fsl,qman-portal"; |
| 332 |
reg = <0x14000 0x4000>, <0x1005000 0x1000>; |
| 333 |
interrupts = <114 0x2 0 0>; |
| 334 |
cell-index = <0x5>; |
| 335 |
}; |
| 336 |
qportal6: qman-portal@18000 { |
| 337 |
compatible = "fsl,qman-portal"; |
| 338 |
reg = <0x18000 0x4000>, <0x1006000 0x1000>; |
| 339 |
interrupts = <116 0x2 0 0>; |
| 340 |
cell-index = <0x6>; |
| 341 |
}; |
| 342 |
qportal7: qman-portal@1c000 { |
| 343 |
compatible = "fsl,qman-portal"; |
| 344 |
reg = <0x1c000 0x4000>, <0x1007000 0x1000>; |
| 345 |
interrupts = <118 0x2 0 0>; |
| 346 |
cell-index = <0x7>; |
| 347 |
}; |
| 348 |
qportal8: qman-portal@20000 { |
| 349 |
compatible = "fsl,qman-portal"; |
| 350 |
reg = <0x20000 0x4000>, <0x1008000 0x1000>; |
| 351 |
interrupts = <120 0x2 0 0>; |
| 352 |
cell-index = <0x8>; |
| 353 |
}; |
| 354 |
qportal9: qman-portal@24000 { |
| 355 |
compatible = "fsl,qman-portal"; |
| 356 |
reg = <0x24000 0x4000>, <0x1009000 0x1000>; |
| 357 |
interrupts = <122 0x2 0 0>; |
| 358 |
cell-index = <0x9>; |
| 359 |
}; |
| 360 |
}; |
| 361 |
|
| 362 |
&soc { |
| 363 |
#address-cells = <1>; |
| 364 |
#size-cells = <1>; |
| 365 |
device_type = "soc"; |
| 366 |
compatible = "simple-bus"; |
| 367 |
|
| 368 |
soc-sram-error { |
| 369 |
compatible = "fsl,soc-sram-error"; |
| 370 |
interrupts = <16 2 1 29>; |
| 371 |
}; |
| 372 |
|
| 373 |
corenet-law@0 { |
| 374 |
compatible = "fsl,corenet-law"; |
| 375 |
reg = <0x0 0x1000>; |
| 376 |
fsl,num-laws = <16>; |
| 377 |
}; |
| 378 |
|
| 379 |
ddr1: memory-controller@8000 { |
| 380 |
compatible = "fsl,qoriq-memory-controller-v5.0", |
| 381 |
"fsl,qoriq-memory-controller"; |
| 382 |
reg = <0x8000 0x1000>; |
| 383 |
interrupts = <16 2 1 23>; |
| 384 |
}; |
| 385 |
|
| 386 |
cpc: l3-cache-controller@10000 { |
| 387 |
compatible = "fsl,t1040-l3-cache-controller", "cache"; |
| 388 |
reg = <0x10000 0x1000>; |
| 389 |
interrupts = <16 2 1 27>; |
| 390 |
}; |
| 391 |
|
| 392 |
corenet-cf@18000 { |
| 393 |
compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; |
| 394 |
reg = <0x18000 0x1000>; |
| 395 |
interrupts = <16 2 1 31>; |
| 396 |
fsl,ccf-num-csdids = <32>; |
| 397 |
fsl,ccf-num-snoopids = <32>; |
| 398 |
}; |
| 399 |
|
| 400 |
iommu@20000 { |
| 401 |
compatible = "fsl,pamu-v1.0", "fsl,pamu"; |
| 402 |
reg = <0x20000 0x1000>; |
| 403 |
ranges = <0 0x20000 0x1000>; |
| 404 |
#address-cells = <1>; |
| 405 |
#size-cells = <1>; |
| 406 |
interrupts = < |
| 407 |
24 2 0 0 |
| 408 |
16 2 1 30>; |
| 409 |
pamu0: pamu@0 { |
| 410 |
reg = <0 0x1000>; |
| 411 |
fsl,primary-cache-geometry = <128 1>; |
| 412 |
fsl,secondary-cache-geometry = <16 2>; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
/include/ "qoriq-mpic.dtsi" |
| 417 |
|
| 418 |
guts: global-utilities@e0000 { |
| 419 |
compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0"; |
| 420 |
reg = <0xe0000 0xe00>; |
| 421 |
fsl,has-rstcr; |
| 422 |
fsl,liodn-bits = <12>; |
| 423 |
}; |
| 424 |
|
| 425 |
/include/ "qoriq-clockgen2.dtsi" |
| 426 |
global-utilities@e1000 { |
| 427 |
compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0"; |
| 428 |
}; |
| 429 |
|
| 430 |
rcpm: global-utilities@e2000 { |
| 431 |
compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1"; |
| 432 |
reg = <0xe2000 0x1000>; |
| 433 |
}; |
| 434 |
|
| 435 |
sfp: sfp@e8000 { |
| 436 |
compatible = "fsl,t1040-sfp"; |
| 437 |
reg = <0xe8000 0x1000>; |
| 438 |
}; |
| 439 |
|
| 440 |
serdes: serdes@ea000 { |
| 441 |
compatible = "fsl,t1040-serdes"; |
| 442 |
reg = <0xea000 0x4000>; |
| 443 |
}; |
| 444 |
|
| 445 |
tmu: tmu@f0000 { |
| 446 |
compatible = "fsl,qoriq-tmu"; |
| 447 |
reg = <0xf0000 0x1000>; |
| 448 |
interrupts = <18 2 0 0>; |
| 449 |
fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>; |
| 450 |
fsl,tmu-calibration = |
| 451 |
<0x00000000 0x00000025>, |
| 452 |
<0x00000001 0x00000028>, |
| 453 |
<0x00000002 0x0000002d>, |
| 454 |
<0x00000003 0x00000031>, |
| 455 |
<0x00000004 0x00000036>, |
| 456 |
<0x00000005 0x0000003a>, |
| 457 |
<0x00000006 0x00000040>, |
| 458 |
<0x00000007 0x00000044>, |
| 459 |
<0x00000008 0x0000004a>, |
| 460 |
<0x00000009 0x0000004f>, |
| 461 |
<0x0000000a 0x00000054>, |
| 462 |
|
| 463 |
<0x00010000 0x0000000d>, |
| 464 |
<0x00010001 0x00000013>, |
| 465 |
<0x00010002 0x00000019>, |
| 466 |
<0x00010003 0x0000001f>, |
| 467 |
<0x00010004 0x00000025>, |
| 468 |
<0x00010005 0x0000002d>, |
| 469 |
<0x00010006 0x00000033>, |
| 470 |
<0x00010007 0x00000043>, |
| 471 |
<0x00010008 0x0000004b>, |
| 472 |
<0x00010009 0x00000053>, |
| 473 |
|
| 474 |
<0x00020000 0x00000010>, |
| 475 |
<0x00020001 0x00000017>, |
| 476 |
<0x00020002 0x0000001f>, |
| 477 |
<0x00020003 0x00000029>, |
| 478 |
<0x00020004 0x00000031>, |
| 479 |
<0x00020005 0x0000003c>, |
| 480 |
<0x00020006 0x00000042>, |
| 481 |
<0x00020007 0x0000004d>, |
| 482 |
<0x00020008 0x00000056>, |
| 483 |
|
| 484 |
<0x00030000 0x00000012>, |
| 485 |
<0x00030001 0x0000001d>; |
| 486 |
#thermal-sensor-cells = <1>; |
| 487 |
}; |
| 488 |
|
| 489 |
thermal-zones { |
| 490 |
cpu_thermal: cpu-thermal { |
| 491 |
polling-delay-passive = <1000>; |
| 492 |
polling-delay = <5000>; |
| 493 |
|
| 494 |
thermal-sensors = <&tmu 2>; |
| 495 |
|
| 496 |
trips { |
| 497 |
cpu_alert: cpu-alert { |
| 498 |
temperature = <85000>; |
| 499 |
hysteresis = <2000>; |
| 500 |
type = "passive"; |
| 501 |
}; |
| 502 |
cpu_crit: cpu-crit { |
| 503 |
temperature = <95000>; |
| 504 |
hysteresis = <2000>; |
| 505 |
type = "critical"; |
| 506 |
}; |
| 507 |
}; |
| 508 |
|
| 509 |
cooling-maps { |
| 510 |
map0 { |
| 511 |
trip = <&cpu_alert>; |
| 512 |
cooling-device = |
| 513 |
<&cpu0 THERMAL_NO_LIMIT |
| 514 |
THERMAL_NO_LIMIT>; |
| 515 |
}; |
| 516 |
map1 { |
| 517 |
trip = <&cpu_alert>; |
| 518 |
cooling-device = |
| 519 |
<&cpu1 THERMAL_NO_LIMIT |
| 520 |
THERMAL_NO_LIMIT>; |
| 521 |
}; |
| 522 |
map2 { |
| 523 |
trip = <&cpu_alert>; |
| 524 |
cooling-device = |
| 525 |
<&cpu2 THERMAL_NO_LIMIT |
| 526 |
THERMAL_NO_LIMIT>; |
| 527 |
}; |
| 528 |
map3 { |
| 529 |
trip = <&cpu_alert>; |
| 530 |
cooling-device = |
| 531 |
<&cpu3 THERMAL_NO_LIMIT |
| 532 |
THERMAL_NO_LIMIT>; |
| 533 |
}; |
| 534 |
}; |
| 535 |
}; |
| 536 |
}; |
| 537 |
|
| 538 |
scfg: global-utilities@fc000 { |
| 539 |
compatible = "fsl,t1040-scfg"; |
| 540 |
reg = <0xfc000 0x1000>; |
| 541 |
}; |
| 542 |
|
| 543 |
/include/ "elo3-dma-0.dtsi" |
| 544 |
/include/ "elo3-dma-1.dtsi" |
| 545 |
/include/ "qoriq-espi-0.dtsi" |
| 546 |
spi@110000 { |
| 547 |
fsl,espi-num-chipselects = <4>; |
| 548 |
}; |
| 549 |
|
| 550 |
/include/ "qoriq-esdhc-0.dtsi" |
| 551 |
sdhc@114000 { |
| 552 |
compatible = "fsl,t1040-esdhc", "fsl,esdhc"; |
| 553 |
fsl,iommu-parent = <&pamu0>; |
| 554 |
fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ |
| 555 |
sdhci,auto-cmd12; |
| 556 |
}; |
| 557 |
/include/ "qoriq-i2c-0.dtsi" |
| 558 |
/include/ "qoriq-i2c-1.dtsi" |
| 559 |
/include/ "qoriq-duart-0.dtsi" |
| 560 |
/include/ "qoriq-duart-1.dtsi" |
| 561 |
/include/ "qoriq-gpio-0.dtsi" |
| 562 |
/include/ "qoriq-gpio-1.dtsi" |
| 563 |
/include/ "qoriq-gpio-2.dtsi" |
| 564 |
/include/ "qoriq-gpio-3.dtsi" |
| 565 |
/include/ "qoriq-usb2-mph-0.dtsi" |
| 566 |
usb0: usb@210000 { |
| 567 |
compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; |
| 568 |
fsl,iommu-parent = <&pamu0>; |
| 569 |
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ |
| 570 |
phy_type = "utmi"; |
| 571 |
port0; |
| 572 |
}; |
| 573 |
/include/ "qoriq-usb2-dr-0.dtsi" |
| 574 |
usb1: usb@211000 { |
| 575 |
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; |
| 576 |
fsl,iommu-parent = <&pamu0>; |
| 577 |
fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ |
| 578 |
dr_mode = "host"; |
| 579 |
phy_type = "utmi"; |
| 580 |
}; |
| 581 |
|
| 582 |
display@180000 { |
| 583 |
compatible = "fsl,t1040-diu", "fsl,diu"; |
| 584 |
reg = <0x180000 1000>; |
| 585 |
interrupts = <74 2 0 0>; |
| 586 |
}; |
| 587 |
|
| 588 |
/include/ "qoriq-sata2-0.dtsi" |
| 589 |
sata@220000 { |
| 590 |
fsl,iommu-parent = <&pamu0>; |
| 591 |
fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ |
| 592 |
}; |
| 593 |
/include/ "qoriq-sata2-1.dtsi" |
| 594 |
sata@221000 { |
| 595 |
fsl,iommu-parent = <&pamu0>; |
| 596 |
fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ |
| 597 |
}; |
| 598 |
/include/ "qoriq-sec5.0-0.dtsi" |
| 599 |
/include/ "qoriq-qman3.dtsi" |
| 600 |
/include/ "qoriq-bman1.dtsi" |
| 601 |
|
| 602 |
/include/ "qoriq-fman3l-0.dtsi" |
| 603 |
/include/ "qoriq-fman3-0-1g-0.dtsi" |
| 604 |
/include/ "qoriq-fman3-0-1g-1.dtsi" |
| 605 |
/include/ "qoriq-fman3-0-1g-2.dtsi" |
| 606 |
/include/ "qoriq-fman3-0-1g-3.dtsi" |
| 607 |
/include/ "qoriq-fman3-0-1g-4.dtsi" |
| 608 |
fman@400000 { |
| 609 |
enet0: ethernet@e0000 { |
| 610 |
}; |
| 611 |
|
| 612 |
enet1: ethernet@e2000 { |
| 613 |
}; |
| 614 |
|
| 615 |
enet2: ethernet@e4000 { |
| 616 |
}; |
| 617 |
|
| 618 |
enet3: ethernet@e6000 { |
| 619 |
}; |
| 620 |
|
| 621 |
enet4: ethernet@e8000 { |
| 622 |
}; |
| 623 |
|
| 624 |
mdio@fc000 { |
| 625 |
interrupts = <100 1 0 0>; |
| 626 |
}; |
| 627 |
|
| 628 |
mdio@fd000 { |
| 629 |
status = "disabled"; |
| 630 |
}; |
| 631 |
}; |
| 632 |
|
| 633 |
seville_switch: ethernet-switch@800000 { |
| 634 |
compatible = "mscc,vsc9953-switch"; |
| 635 |
reg = <0x800000 0x290000>; |
| 636 |
interrupts = <26 2 0 0>; |
| 637 |
interrupt-names = "xtr"; |
| 638 |
little-endian; |
| 639 |
#address-cells = <1>; |
| 640 |
#size-cells = <0>; |
| 641 |
status = "disabled"; |
| 642 |
|
| 643 |
ports { |
| 644 |
#address-cells = <1>; |
| 645 |
#size-cells = <0>; |
| 646 |
|
| 647 |
seville_port0: port@0 { |
| 648 |
reg = <0>; |
| 649 |
status = "disabled"; |
| 650 |
}; |
| 651 |
|
| 652 |
seville_port1: port@1 { |
| 653 |
reg = <1>; |
| 654 |
status = "disabled"; |
| 655 |
}; |
| 656 |
|
| 657 |
seville_port2: port@2 { |
| 658 |
reg = <2>; |
| 659 |
status = "disabled"; |
| 660 |
}; |
| 661 |
|
| 662 |
seville_port3: port@3 { |
| 663 |
reg = <3>; |
| 664 |
status = "disabled"; |
| 665 |
}; |
| 666 |
|
| 667 |
seville_port4: port@4 { |
| 668 |
reg = <4>; |
| 669 |
status = "disabled"; |
| 670 |
}; |
| 671 |
|
| 672 |
seville_port5: port@5 { |
| 673 |
reg = <5>; |
| 674 |
status = "disabled"; |
| 675 |
}; |
| 676 |
|
| 677 |
seville_port6: port@6 { |
| 678 |
reg = <6>; |
| 679 |
status = "disabled"; |
| 680 |
}; |
| 681 |
|
| 682 |
seville_port7: port@7 { |
| 683 |
reg = <7>; |
| 684 |
status = "disabled"; |
| 685 |
}; |
| 686 |
|
| 687 |
seville_port8: port@8 { |
| 688 |
reg = <8>; |
| 689 |
phy-mode = "internal"; |
| 690 |
ethernet = <&enet0>; |
| 691 |
status = "disabled"; |
| 692 |
|
| 693 |
fixed-link { |
| 694 |
speed = <2500>; |
| 695 |
full-duplex; |
| 696 |
}; |
| 697 |
}; |
| 698 |
|
| 699 |
seville_port9: port@9 { |
| 700 |
reg = <9>; |
| 701 |
phy-mode = "internal"; |
| 702 |
ethernet = <&enet1>; |
| 703 |
status = "disabled"; |
| 704 |
|
| 705 |
fixed-link { |
| 706 |
speed = <2500>; |
| 707 |
full-duplex; |
| 708 |
}; |
| 709 |
}; |
| 710 |
}; |
| 711 |
}; |
| 712 |
}; |
| 713 |
|
| 714 |
&qe { |
| 715 |
#address-cells = <1>; |
| 716 |
#size-cells = <1>; |
| 717 |
device_type = "qe"; |
| 718 |
compatible = "fsl,qe"; |
| 719 |
fsl,qe-num-riscs = <1>; |
| 720 |
fsl,qe-num-snums = <28>; |
| 721 |
|
| 722 |
qeic: interrupt-controller@80 { |
| 723 |
interrupt-controller; |
| 724 |
compatible = "fsl,qe-ic"; |
| 725 |
#address-cells = <0>; |
| 726 |
#interrupt-cells = <1>; |
| 727 |
reg = <0x80 0x80>; |
| 728 |
interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78 |
| 729 |
}; |
| 730 |
|
| 731 |
ucc@2000 { |
| 732 |
cell-index = <1>; |
| 733 |
reg = <0x2000 0x200>; |
| 734 |
interrupts = <32>; |
| 735 |
interrupt-parent = <&qeic>; |
| 736 |
}; |
| 737 |
|
| 738 |
ucc@2200 { |
| 739 |
cell-index = <3>; |
| 740 |
reg = <0x2200 0x200>; |
| 741 |
interrupts = <34>; |
| 742 |
interrupt-parent = <&qeic>; |
| 743 |
}; |
| 744 |
|
| 745 |
muram@10000 { |
| 746 |
#address-cells = <1>; |
| 747 |
#size-cells = <1>; |
| 748 |
compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| 749 |
ranges = <0x0 0x10000 0x6000>; |
| 750 |
|
| 751 |
data-only@0 { |
| 752 |
compatible = "fsl,qe-muram-data", |
| 753 |
"fsl,cpm-muram-data"; |
| 754 |
reg = <0x0 0x6000>; |
| 755 |
}; |
| 756 |
}; |
| 757 |
}; |