| 1 |
/* |
| 2 |
* T1023 RDB Device Tree Source |
| 3 |
* |
| 4 |
* Copyright 2014 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
/include/ "t102xsi-pre.dtsi" |
| 36 |
|
| 37 |
/ { |
| 38 |
model = "fsl,T1023RDB"; |
| 39 |
compatible = "fsl,T1023RDB"; |
| 40 |
#address-cells = <2>; |
| 41 |
#size-cells = <2>; |
| 42 |
interrupt-parent = <&mpic>; |
| 43 |
|
| 44 |
reserved-memory { |
| 45 |
#address-cells = <2>; |
| 46 |
#size-cells = <2>; |
| 47 |
ranges; |
| 48 |
|
| 49 |
bman_fbpr: bman-fbpr { |
| 50 |
size = <0 0x1000000>; |
| 51 |
alignment = <0 0x1000000>; |
| 52 |
}; |
| 53 |
|
| 54 |
qman_fqd: qman-fqd { |
| 55 |
size = <0 0x400000>; |
| 56 |
alignment = <0 0x400000>; |
| 57 |
}; |
| 58 |
|
| 59 |
qman_pfdr: qman-pfdr { |
| 60 |
size = <0 0x2000000>; |
| 61 |
alignment = <0 0x2000000>; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
ifc: localbus@ffe124000 { |
| 66 |
reg = <0xf 0xfe124000 0 0x2000>; |
| 67 |
ranges = <0 0 0xf 0xe8000000 0x08000000 |
| 68 |
1 0 0xf 0xff800000 0x00010000>; |
| 69 |
|
| 70 |
nor@0,0 { |
| 71 |
#address-cells = <1>; |
| 72 |
#size-cells = <1>; |
| 73 |
status = "disabled"; |
| 74 |
compatible = "cfi-flash"; |
| 75 |
reg = <0x0 0x0 0x8000000>; |
| 76 |
bank-width = <2>; |
| 77 |
device-width = <1>; |
| 78 |
}; |
| 79 |
|
| 80 |
nand@1,0 { |
| 81 |
#address-cells = <1>; |
| 82 |
#size-cells = <1>; |
| 83 |
compatible = "fsl,ifc-nand"; |
| 84 |
reg = <0x1 0x0 0x10000>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
memory { |
| 89 |
device_type = "memory"; |
| 90 |
}; |
| 91 |
|
| 92 |
dcsr: dcsr@f00000000 { |
| 93 |
ranges = <0x00000000 0xf 0x00000000 0x01072000>; |
| 94 |
}; |
| 95 |
|
| 96 |
bportals: bman-portals@ff4000000 { |
| 97 |
ranges = <0x0 0xf 0xf4000000 0x2000000>; |
| 98 |
}; |
| 99 |
|
| 100 |
qportals: qman-portals@ff6000000 { |
| 101 |
ranges = <0x0 0xf 0xf6000000 0x2000000>; |
| 102 |
}; |
| 103 |
|
| 104 |
soc: soc@ffe000000 { |
| 105 |
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| 106 |
reg = <0xf 0xfe000000 0 0x00001000>; |
| 107 |
spi@110000 { |
| 108 |
flash@0 { |
| 109 |
#address-cells = <1>; |
| 110 |
#size-cells = <1>; |
| 111 |
compatible = "spansion,s25fl512s", "jedec,spi-nor"; |
| 112 |
reg = <0>; |
| 113 |
spi-max-frequency = <10000000>; /* input clk */ |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
i2c@118000 { |
| 118 |
eeprom@50 { |
| 119 |
compatible = "st,m24256"; |
| 120 |
reg = <0x50>; |
| 121 |
}; |
| 122 |
|
| 123 |
rtc@68 { |
| 124 |
compatible = "dallas,ds1339"; |
| 125 |
reg = <0x68>; |
| 126 |
interrupts = <0x5 0x1 0 0>; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
i2c@118100 { |
| 131 |
current-sensor@40 { |
| 132 |
compatible = "ti,ina220"; |
| 133 |
reg = <0x40>; |
| 134 |
shunt-resistor = <1000>; |
| 135 |
}; |
| 136 |
|
| 137 |
current-sensor@41 { |
| 138 |
compatible = "ti,ina220"; |
| 139 |
reg = <0x41>; |
| 140 |
shunt-resistor = <1000>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
fman@400000 { |
| 145 |
fm1mac1: ethernet@e0000 { |
| 146 |
phy-handle = <&sgmii_rtk_phy2>; |
| 147 |
phy-connection-type = "sgmii"; |
| 148 |
sleep = <&rcpm 0x80000000>; |
| 149 |
}; |
| 150 |
|
| 151 |
fm1mac2: ethernet@e2000 { |
| 152 |
sleep = <&rcpm 0x40000000>; |
| 153 |
}; |
| 154 |
|
| 155 |
fm1mac3: ethernet@e4000 { |
| 156 |
phy-handle = <&sgmii_aqr_phy3>; |
| 157 |
phy-connection-type = "2500base-x"; |
| 158 |
sleep = <&rcpm 0x20000000>; |
| 159 |
}; |
| 160 |
|
| 161 |
fm1mac4: ethernet@e6000 { |
| 162 |
phy-handle = <&rgmii_rtk_phy1>; |
| 163 |
phy-connection-type = "rgmii"; |
| 164 |
sleep = <&rcpm 0x10000000>; |
| 165 |
}; |
| 166 |
|
| 167 |
|
| 168 |
mdio0: mdio@fc000 { |
| 169 |
rgmii_rtk_phy1: ethernet-phy@1 { |
| 170 |
reg = <0x1>; |
| 171 |
}; |
| 172 |
sgmii_rtk_phy2: ethernet-phy@3 { |
| 173 |
reg = <0x3>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
xmdio0: mdio@fd000 { |
| 178 |
sgmii_aqr_phy3: ethernet-phy@2 { |
| 179 |
compatible = "ethernet-phy-ieee802.3-c45"; |
| 180 |
reg = <0x2>; |
| 181 |
}; |
| 182 |
}; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
pci0: pcie@ffe240000 { |
| 187 |
reg = <0xf 0xfe240000 0 0x10000>; |
| 188 |
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 |
| 189 |
0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; |
| 190 |
pcie@0 { |
| 191 |
ranges = <0x02000000 0 0xe0000000 |
| 192 |
0x02000000 0 0xe0000000 |
| 193 |
0 0x10000000 |
| 194 |
|
| 195 |
0x01000000 0 0x00000000 |
| 196 |
0x01000000 0 0x00000000 |
| 197 |
0 0x00010000>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
pci1: pcie@ffe250000 { |
| 202 |
reg = <0xf 0xfe250000 0 0x10000>; |
| 203 |
ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 |
| 204 |
0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; |
| 205 |
pcie@0 { |
| 206 |
ranges = <0x02000000 0 0xe0000000 |
| 207 |
0x02000000 0 0xe0000000 |
| 208 |
0 0x10000000 |
| 209 |
|
| 210 |
0x01000000 0 0x00000000 |
| 211 |
0x01000000 0 0x00000000 |
| 212 |
0 0x00010000>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
pci2: pcie@ffe260000 { |
| 217 |
reg = <0xf 0xfe260000 0 0x10000>; |
| 218 |
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 |
| 219 |
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; |
| 220 |
pcie@0 { |
| 221 |
ranges = <0x02000000 0 0xe0000000 |
| 222 |
0x02000000 0 0xe0000000 |
| 223 |
0 0x10000000 |
| 224 |
|
| 225 |
0x01000000 0 0x00000000 |
| 226 |
0x01000000 0 0x00000000 |
| 227 |
0 0x00010000>; |
| 228 |
}; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
#include "t1023si-post.dtsi" |