| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* PPA8548 Device Tree Source (36-bit address map) |
| 4 |
* Copyright 2013 Prodrive B.V. |
| 5 |
* |
| 6 |
* Based on: |
| 7 |
* MPC8548 CDS Device Tree Source (36-bit address map) |
| 8 |
* Copyright 2012 Freescale Semiconductor Inc. |
| 9 |
*/ |
| 10 |
|
| 11 |
/include/ "mpc8548si-pre.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "ppa8548"; |
| 15 |
compatible = "ppa8548"; |
| 16 |
#address-cells = <2>; |
| 17 |
#size-cells = <2>; |
| 18 |
interrupt-parent = <&mpic>; |
| 19 |
|
| 20 |
memory { |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0 0 0x0 0x40000000>; |
| 23 |
}; |
| 24 |
|
| 25 |
lbc: localbus@fe0005000 { |
| 26 |
reg = <0xf 0xe0005000 0 0x1000>; |
| 27 |
ranges = <0x0 0x0 0xf 0xff800000 0x00800000>; |
| 28 |
}; |
| 29 |
|
| 30 |
soc: soc8548@fe0000000 { |
| 31 |
ranges = <0 0xf 0xe0000000 0x100000>; |
| 32 |
}; |
| 33 |
|
| 34 |
pci0: pci@fe0008000 { |
| 35 |
/* ppa8548 board doesn't support PCI */ |
| 36 |
status = "disabled"; |
| 37 |
}; |
| 38 |
|
| 39 |
pci1: pci@fe0009000 { |
| 40 |
/* ppa8548 board doesn't support PCI */ |
| 41 |
status = "disabled"; |
| 42 |
}; |
| 43 |
|
| 44 |
pci2: pcie@fe000a000 { |
| 45 |
/* ppa8548 board doesn't support PCI */ |
| 46 |
status = "disabled"; |
| 47 |
}; |
| 48 |
|
| 49 |
rio: rapidio@fe00c0000 { |
| 50 |
reg = <0xf 0xe00c0000 0x0 0x11000>; |
| 51 |
port1 { |
| 52 |
ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
&lbc { |
| 58 |
nor@0 { |
| 59 |
#address-cells = <1>; |
| 60 |
#size-cells = <1>; |
| 61 |
compatible = "cfi-flash"; |
| 62 |
reg = <0x0 0x0 0x00800000>; |
| 63 |
bank-width = <2>; |
| 64 |
device-width = <2>; |
| 65 |
|
| 66 |
partition@0 { |
| 67 |
reg = <0x0 0x7A0000>; |
| 68 |
label = "user"; |
| 69 |
}; |
| 70 |
|
| 71 |
partition@7A0000 { |
| 72 |
reg = <0x7A0000 0x20000>; |
| 73 |
label = "env"; |
| 74 |
read-only; |
| 75 |
}; |
| 76 |
|
| 77 |
partition@7C0000 { |
| 78 |
reg = <0x7C0000 0x40000>; |
| 79 |
label = "u-boot"; |
| 80 |
read-only; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
&soc { |
| 86 |
i2c@3000 { |
| 87 |
rtc@6f { |
| 88 |
compatible = "intersil,isl1208"; |
| 89 |
reg = <0x6f>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
i2c@3100 { |
| 94 |
}; |
| 95 |
|
| 96 |
/* |
| 97 |
* Only ethernet controller @25000 and @26000 are used. |
| 98 |
* Use alias enet2 and enet3 for the remainig controllers, |
| 99 |
* to stay compatible with mpc8548si-pre.dtsi. |
| 100 |
*/ |
| 101 |
enet2: ethernet@24000 { |
| 102 |
status = "disabled"; |
| 103 |
}; |
| 104 |
|
| 105 |
mdio@24520 { |
| 106 |
phy0: ethernet-phy@0 { |
| 107 |
interrupts = <7 1 0 0>; |
| 108 |
reg = <0x0>; |
| 109 |
}; |
| 110 |
phy1: ethernet-phy@1 { |
| 111 |
interrupts = <8 1 0 0>; |
| 112 |
reg = <0x1>; |
| 113 |
}; |
| 114 |
tbi0: tbi-phy@11 { |
| 115 |
reg = <0x11>; |
| 116 |
device_type = "tbi-phy"; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
enet0: ethernet@25000 { |
| 121 |
tbi-handle = <&tbi1>; |
| 122 |
phy-handle = <&phy0>; |
| 123 |
}; |
| 124 |
|
| 125 |
mdio@25520 { |
| 126 |
tbi1: tbi-phy@11 { |
| 127 |
reg = <0x11>; |
| 128 |
device_type = "tbi-phy"; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
enet1: ethernet@26000 { |
| 133 |
tbi-handle = <&tbi2>; |
| 134 |
phy-handle = <&phy1>; |
| 135 |
}; |
| 136 |
|
| 137 |
mdio@26520 { |
| 138 |
tbi2: tbi-phy@11 { |
| 139 |
reg = <0x11>; |
| 140 |
device_type = "tbi-phy"; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
enet3: ethernet@27000 { |
| 145 |
status = "disabled"; |
| 146 |
}; |
| 147 |
|
| 148 |
mdio@27520 { |
| 149 |
tbi3: tbi-phy@11 { |
| 150 |
reg = <0x11>; |
| 151 |
device_type = "tbi-phy"; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
crypto@30000 { |
| 156 |
status = "disabled"; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
/include/ "mpc8548si-post.dtsi" |