| 1 |
/* |
| 2 |
* P5020DS Device Tree Source |
| 3 |
* |
| 4 |
* Copyright 2010 - 2015 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
/include/ "p5020si-pre.dtsi" |
| 36 |
|
| 37 |
/ { |
| 38 |
model = "fsl,P5020DS"; |
| 39 |
compatible = "fsl,P5020DS"; |
| 40 |
#address-cells = <2>; |
| 41 |
#size-cells = <2>; |
| 42 |
interrupt-parent = <&mpic>; |
| 43 |
|
| 44 |
aliases { |
| 45 |
phy_rgmii_0 = &phy_rgmii_0; |
| 46 |
phy_rgmii_1 = &phy_rgmii_1; |
| 47 |
phy_sgmii_1c = &phy_sgmii_1c; |
| 48 |
phy_sgmii_1d = &phy_sgmii_1d; |
| 49 |
phy_sgmii_1e = &phy_sgmii_1e; |
| 50 |
phy_sgmii_1f = &phy_sgmii_1f; |
| 51 |
phy_xgmii_1 = &phy_xgmii_1; |
| 52 |
phy_xgmii_2 = &phy_xgmii_2; |
| 53 |
emi1_rgmii = &hydra_mdio_rgmii; |
| 54 |
emi1_sgmii = &hydra_mdio_sgmii; |
| 55 |
emi2_xgmii = &hydra_mdio_xgmii; |
| 56 |
}; |
| 57 |
|
| 58 |
memory { |
| 59 |
device_type = "memory"; |
| 60 |
}; |
| 61 |
|
| 62 |
reserved-memory { |
| 63 |
#address-cells = <2>; |
| 64 |
#size-cells = <2>; |
| 65 |
ranges; |
| 66 |
|
| 67 |
bman_fbpr: bman-fbpr { |
| 68 |
size = <0 0x1000000>; |
| 69 |
alignment = <0 0x1000000>; |
| 70 |
}; |
| 71 |
qman_fqd: qman-fqd { |
| 72 |
size = <0 0x400000>; |
| 73 |
alignment = <0 0x400000>; |
| 74 |
}; |
| 75 |
qman_pfdr: qman-pfdr { |
| 76 |
size = <0 0x2000000>; |
| 77 |
alignment = <0 0x2000000>; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
dcsr: dcsr@f00000000 { |
| 82 |
ranges = <0x00000000 0xf 0x00000000 0x01008000>; |
| 83 |
}; |
| 84 |
|
| 85 |
bportals: bman-portals@ff4000000 { |
| 86 |
ranges = <0x0 0xf 0xf4000000 0x200000>; |
| 87 |
}; |
| 88 |
|
| 89 |
qportals: qman-portals@ff4200000 { |
| 90 |
ranges = <0x0 0xf 0xf4200000 0x200000>; |
| 91 |
}; |
| 92 |
|
| 93 |
soc: soc@ffe000000 { |
| 94 |
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| 95 |
reg = <0xf 0xfe000000 0 0x00001000>; |
| 96 |
spi@110000 { |
| 97 |
flash@0 { |
| 98 |
#address-cells = <1>; |
| 99 |
#size-cells = <1>; |
| 100 |
compatible = "spansion,s25sl12801", "jedec,spi-nor"; |
| 101 |
reg = <0>; |
| 102 |
spi-max-frequency = <40000000>; /* input clock */ |
| 103 |
partition@u-boot { |
| 104 |
label = "u-boot"; |
| 105 |
reg = <0x00000000 0x00100000>; |
| 106 |
read-only; |
| 107 |
}; |
| 108 |
partition@kernel { |
| 109 |
label = "kernel"; |
| 110 |
reg = <0x00100000 0x00500000>; |
| 111 |
read-only; |
| 112 |
}; |
| 113 |
partition@dtb { |
| 114 |
label = "dtb"; |
| 115 |
reg = <0x00600000 0x00100000>; |
| 116 |
read-only; |
| 117 |
}; |
| 118 |
partition@fs { |
| 119 |
label = "file system"; |
| 120 |
reg = <0x00700000 0x00900000>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
i2c@118100 { |
| 126 |
eeprom@51 { |
| 127 |
compatible = "atmel,24c256"; |
| 128 |
reg = <0x51>; |
| 129 |
}; |
| 130 |
eeprom@52 { |
| 131 |
compatible = "atmel,24c256"; |
| 132 |
reg = <0x52>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
i2c@119100 { |
| 137 |
rtc@68 { |
| 138 |
compatible = "dallas,ds3232"; |
| 139 |
reg = <0x68>; |
| 140 |
interrupts = <0x1 0x1 0 0>; |
| 141 |
}; |
| 142 |
ina220@40 { |
| 143 |
compatible = "ti,ina220"; |
| 144 |
reg = <0x40>; |
| 145 |
shunt-resistor = <1000>; |
| 146 |
}; |
| 147 |
ina220@41 { |
| 148 |
compatible = "ti,ina220"; |
| 149 |
reg = <0x41>; |
| 150 |
shunt-resistor = <1000>; |
| 151 |
}; |
| 152 |
ina220@44 { |
| 153 |
compatible = "ti,ina220"; |
| 154 |
reg = <0x44>; |
| 155 |
shunt-resistor = <1000>; |
| 156 |
}; |
| 157 |
ina220@45 { |
| 158 |
compatible = "ti,ina220"; |
| 159 |
reg = <0x45>; |
| 160 |
shunt-resistor = <1000>; |
| 161 |
}; |
| 162 |
adt7461@4c { |
| 163 |
compatible = "adi,adt7461"; |
| 164 |
reg = <0x4c>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
fman@400000 { |
| 169 |
ethernet@e0000 { |
| 170 |
phy-handle = <&phy_sgmii_1c>; |
| 171 |
phy-connection-type = "sgmii"; |
| 172 |
}; |
| 173 |
|
| 174 |
ethernet@e2000 { |
| 175 |
phy-handle = <&phy_sgmii_1d>; |
| 176 |
phy-connection-type = "sgmii"; |
| 177 |
}; |
| 178 |
|
| 179 |
ethernet@e4000 { |
| 180 |
phy-handle = <&phy_sgmii_1e>; |
| 181 |
phy-connection-type = "sgmii"; |
| 182 |
}; |
| 183 |
|
| 184 |
ethernet@e6000 { |
| 185 |
phy-handle = <&phy_sgmii_1f>; |
| 186 |
phy-connection-type = "sgmii"; |
| 187 |
}; |
| 188 |
|
| 189 |
ethernet@e8000 { |
| 190 |
phy-handle = <&phy_rgmii_1>; |
| 191 |
phy-connection-type = "rgmii"; |
| 192 |
}; |
| 193 |
|
| 194 |
ethernet@f0000 { |
| 195 |
phy-handle = <&phy_xgmii_1>; |
| 196 |
phy-connection-type = "xgmii"; |
| 197 |
}; |
| 198 |
|
| 199 |
hydra_mdio_xgmii: mdio@f1000 { |
| 200 |
status = "disabled"; |
| 201 |
|
| 202 |
phy_xgmii_1: ethernet-phy@4 { |
| 203 |
compatible = "ethernet-phy-ieee802.3-c45"; |
| 204 |
reg = <0x4>; |
| 205 |
}; |
| 206 |
|
| 207 |
phy_xgmii_2: ethernet-phy@0 { |
| 208 |
compatible = "ethernet-phy-ieee802.3-c45"; |
| 209 |
reg = <0x0>; |
| 210 |
}; |
| 211 |
}; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
rio: rapidio@ffe0c0000 { |
| 216 |
reg = <0xf 0xfe0c0000 0 0x11000>; |
| 217 |
|
| 218 |
port1 { |
| 219 |
ranges = <0 0 0xc 0x20000000 0 0x10000000>; |
| 220 |
}; |
| 221 |
port2 { |
| 222 |
ranges = <0 0 0xc 0x30000000 0 0x10000000>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
lbc: localbus@ffe124000 { |
| 227 |
reg = <0xf 0xfe124000 0 0x1000>; |
| 228 |
ranges = <0 0 0xf 0xe8000000 0x08000000 |
| 229 |
2 0 0xf 0xffa00000 0x00040000 |
| 230 |
3 0 0xf 0xffdf0000 0x00008000>; |
| 231 |
|
| 232 |
flash@0,0 { |
| 233 |
compatible = "cfi-flash"; |
| 234 |
reg = <0 0 0x08000000>; |
| 235 |
bank-width = <2>; |
| 236 |
device-width = <2>; |
| 237 |
}; |
| 238 |
|
| 239 |
nand@2,0 { |
| 240 |
#address-cells = <1>; |
| 241 |
#size-cells = <1>; |
| 242 |
compatible = "fsl,elbc-fcm-nand"; |
| 243 |
reg = <0x2 0x0 0x40000>; |
| 244 |
|
| 245 |
partition@0 { |
| 246 |
label = "NAND U-Boot Image"; |
| 247 |
reg = <0x0 0x02000000>; |
| 248 |
read-only; |
| 249 |
}; |
| 250 |
|
| 251 |
partition@2000000 { |
| 252 |
label = "NAND Root File System"; |
| 253 |
reg = <0x02000000 0x10000000>; |
| 254 |
}; |
| 255 |
|
| 256 |
partition@12000000 { |
| 257 |
label = "NAND Compressed RFS Image"; |
| 258 |
reg = <0x12000000 0x08000000>; |
| 259 |
}; |
| 260 |
|
| 261 |
partition@1a000000 { |
| 262 |
label = "NAND Linux Kernel Image"; |
| 263 |
reg = <0x1a000000 0x04000000>; |
| 264 |
}; |
| 265 |
|
| 266 |
partition@1e000000 { |
| 267 |
label = "NAND DTB Image"; |
| 268 |
reg = <0x1e000000 0x01000000>; |
| 269 |
}; |
| 270 |
|
| 271 |
partition@1f000000 { |
| 272 |
label = "NAND Writable User area"; |
| 273 |
reg = <0x1f000000 0x21000000>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
board-control@3,0 { |
| 278 |
#address-cells = <1>; |
| 279 |
#size-cells = <1>; |
| 280 |
compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; |
| 281 |
reg = <3 0 0x30>; |
| 282 |
ranges = <0 3 0 0x30>; |
| 283 |
|
| 284 |
mdio-mux-emi1 { |
| 285 |
#address-cells = <1>; |
| 286 |
#size-cells = <0>; |
| 287 |
compatible = "mdio-mux-mmioreg", "mdio-mux"; |
| 288 |
mdio-parent-bus = <&mdio0>; |
| 289 |
reg = <9 1>; |
| 290 |
mux-mask = <0x78>; |
| 291 |
|
| 292 |
hydra_mdio_rgmii: rgmii-mdio@8 { |
| 293 |
#address-cells = <1>; |
| 294 |
#size-cells = <0>; |
| 295 |
reg = <8>; |
| 296 |
status = "disabled"; |
| 297 |
|
| 298 |
phy_rgmii_0: ethernet-phy@0 { |
| 299 |
reg = <0x0>; |
| 300 |
}; |
| 301 |
|
| 302 |
phy_rgmii_1: ethernet-phy@1 { |
| 303 |
reg = <0x1>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
hydra_mdio_sgmii: sgmii-mdio@28 { |
| 308 |
#address-cells = <1>; |
| 309 |
#size-cells = <0>; |
| 310 |
reg = <0x28>; |
| 311 |
status = "disabled"; |
| 312 |
|
| 313 |
phy_sgmii_1c: ethernet-phy@1c { |
| 314 |
reg = <0x1c>; |
| 315 |
}; |
| 316 |
|
| 317 |
phy_sgmii_1d: ethernet-phy@1d { |
| 318 |
reg = <0x1d>; |
| 319 |
}; |
| 320 |
|
| 321 |
phy_sgmii_1e: ethernet-phy@1e { |
| 322 |
reg = <0x1e>; |
| 323 |
}; |
| 324 |
|
| 325 |
phy_sgmii_1f: ethernet-phy@1f { |
| 326 |
reg = <0x1f>; |
| 327 |
}; |
| 328 |
}; |
| 329 |
}; |
| 330 |
}; |
| 331 |
}; |
| 332 |
|
| 333 |
pci0: pcie@ffe200000 { |
| 334 |
reg = <0xf 0xfe200000 0 0x1000>; |
| 335 |
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 |
| 336 |
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; |
| 337 |
pcie@0 { |
| 338 |
ranges = <0x02000000 0 0xe0000000 |
| 339 |
0x02000000 0 0xe0000000 |
| 340 |
0 0x20000000 |
| 341 |
|
| 342 |
0x01000000 0 0x00000000 |
| 343 |
0x01000000 0 0x00000000 |
| 344 |
0 0x00010000>; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
pci1: pcie@ffe201000 { |
| 349 |
reg = <0xf 0xfe201000 0 0x1000>; |
| 350 |
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 |
| 351 |
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; |
| 352 |
pcie@0 { |
| 353 |
ranges = <0x02000000 0 0xe0000000 |
| 354 |
0x02000000 0 0xe0000000 |
| 355 |
0 0x20000000 |
| 356 |
|
| 357 |
0x01000000 0 0x00000000 |
| 358 |
0x01000000 0 0x00000000 |
| 359 |
0 0x00010000>; |
| 360 |
}; |
| 361 |
}; |
| 362 |
|
| 363 |
pci2: pcie@ffe202000 { |
| 364 |
reg = <0xf 0xfe202000 0 0x1000>; |
| 365 |
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 |
| 366 |
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; |
| 367 |
pcie@0 { |
| 368 |
ranges = <0x02000000 0 0xe0000000 |
| 369 |
0x02000000 0 0xe0000000 |
| 370 |
0 0x20000000 |
| 371 |
|
| 372 |
0x01000000 0 0x00000000 |
| 373 |
0x01000000 0 0x00000000 |
| 374 |
0 0x00010000>; |
| 375 |
}; |
| 376 |
}; |
| 377 |
|
| 378 |
pci3: pcie@ffe203000 { |
| 379 |
reg = <0xf 0xfe203000 0 0x1000>; |
| 380 |
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 |
| 381 |
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; |
| 382 |
pcie@0 { |
| 383 |
ranges = <0x02000000 0 0xe0000000 |
| 384 |
0x02000000 0 0xe0000000 |
| 385 |
0 0x20000000 |
| 386 |
|
| 387 |
0x01000000 0 0x00000000 |
| 388 |
0x01000000 0 0x00000000 |
| 389 |
0 0x00010000>; |
| 390 |
}; |
| 391 |
}; |
| 392 |
}; |
| 393 |
|
| 394 |
/include/ "p5020si-post.dtsi" |