| 1 |
/* |
| 2 |
* P1025 TWR Device Tree Source stub (no addresses or top-level ranges) |
| 3 |
* |
| 4 |
* Copyright 2013 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
/{ |
| 36 |
aliases { |
| 37 |
ethernet3 = &enet3; |
| 38 |
ethernet4 = &enet4; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
&lbc { |
| 43 |
nor@0,0 { |
| 44 |
#address-cells = <1>; |
| 45 |
#size-cells = <1>; |
| 46 |
compatible = "cfi-flash"; |
| 47 |
reg = <0x0 0x0 0x4000000>; |
| 48 |
bank-width = <2>; |
| 49 |
device-width = <1>; |
| 50 |
|
| 51 |
partition@0 { |
| 52 |
/* This location must not be altered */ |
| 53 |
/* 256KB for Vitesse 7385 Switch firmware */ |
| 54 |
reg = <0x0 0x00040000>; |
| 55 |
label = "NOR Vitesse-7385 Firmware"; |
| 56 |
read-only; |
| 57 |
}; |
| 58 |
|
| 59 |
partition@40000 { |
| 60 |
/* 256KB for DTB Image */ |
| 61 |
reg = <0x00040000 0x00040000>; |
| 62 |
label = "NOR DTB Image"; |
| 63 |
}; |
| 64 |
|
| 65 |
partition@80000 { |
| 66 |
/* 5.5 MB for Linux Kernel Image */ |
| 67 |
reg = <0x00080000 0x00580000>; |
| 68 |
label = "NOR Linux Kernel Image"; |
| 69 |
}; |
| 70 |
|
| 71 |
partition@400000 { |
| 72 |
/* 56.75MB for Root file System */ |
| 73 |
reg = <0x00600000 0x038c0000>; |
| 74 |
label = "NOR Root File System"; |
| 75 |
}; |
| 76 |
|
| 77 |
partition@ec0000 { |
| 78 |
/* This location must not be altered */ |
| 79 |
/* 256KB for QE ucode firmware*/ |
| 80 |
reg = <0x03ec0000 0x00040000>; |
| 81 |
label = "NOR QE microcode firmware"; |
| 82 |
read-only; |
| 83 |
}; |
| 84 |
|
| 85 |
partition@f00000 { |
| 86 |
/* This location must not be altered */ |
| 87 |
/* 512KB for u-boot Bootloader Image */ |
| 88 |
/* 512KB for u-boot Environment Variables */ |
| 89 |
reg = <0x03f00000 0x00100000>; |
| 90 |
label = "NOR U-Boot Image"; |
| 91 |
read-only; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
/* CS2 for Display */ |
| 96 |
display@2,0 { |
| 97 |
compatible = "solomon,ssd1289fb"; |
| 98 |
reg = <0x2 0x0000 0x0004>; |
| 99 |
}; |
| 100 |
|
| 101 |
}; |
| 102 |
|
| 103 |
&soc { |
| 104 |
usb@22000 { |
| 105 |
phy_type = "ulpi"; |
| 106 |
}; |
| 107 |
|
| 108 |
mdio@24000 { |
| 109 |
phy0: ethernet-phy@2 { |
| 110 |
interrupt-parent = <&mpic>; |
| 111 |
interrupts = <1 1 0 0>; |
| 112 |
reg = <0x2>; |
| 113 |
}; |
| 114 |
|
| 115 |
phy1: ethernet-phy@1 { |
| 116 |
interrupt-parent = <&mpic>; |
| 117 |
interrupts = <2 1 0 0>; |
| 118 |
reg = <0x1>; |
| 119 |
}; |
| 120 |
|
| 121 |
tbi0: tbi-phy@11 { |
| 122 |
reg = <0x11>; |
| 123 |
device_type = "tbi-phy"; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
mdio@25000 { |
| 128 |
tbi1: tbi-phy@11 { |
| 129 |
reg = <0x11>; |
| 130 |
device_type = "tbi-phy"; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
mdio@26000 { |
| 135 |
tbi2: tbi-phy@11 { |
| 136 |
reg = <0x11>; |
| 137 |
device_type = "tbi-phy"; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
ptp_clock@b0e00 { |
| 142 |
compatible = "fsl,etsec-ptp"; |
| 143 |
reg = <0xb0e00 0xb0>; |
| 144 |
interrupts = <68 2 0 0 69 2 0 0>; |
| 145 |
fsl,tclk-period = <10>; |
| 146 |
fsl,tmr-prsc = <2>; |
| 147 |
fsl,tmr-add = <0xc0000021>; |
| 148 |
fsl,tmr-fiper1 = <999999990>; |
| 149 |
fsl,tmr-fiper2 = <99990>; |
| 150 |
fsl,max-adj = <133333332>; |
| 151 |
}; |
| 152 |
|
| 153 |
enet0: ethernet@b0000 { |
| 154 |
phy-handle = <&phy0>; |
| 155 |
phy-connection-type = "rgmii-id"; |
| 156 |
|
| 157 |
}; |
| 158 |
|
| 159 |
enet1: ethernet@b1000 { |
| 160 |
status = "disabled"; |
| 161 |
}; |
| 162 |
|
| 163 |
enet2: ethernet@b2000 { |
| 164 |
phy-handle = <&phy1>; |
| 165 |
phy-connection-type = "rgmii-id"; |
| 166 |
}; |
| 167 |
|
| 168 |
par_io@e0100 { |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <1>; |
| 171 |
reg = <0xe0100 0x60>; |
| 172 |
ranges = <0x0 0xe0100 0x60>; |
| 173 |
device_type = "par_io"; |
| 174 |
num-ports = <3>; |
| 175 |
pio1: ucc_pin@1 { |
| 176 |
pio-map = < |
| 177 |
/* port pin dir open_drain assignment has_irq */ |
| 178 |
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 179 |
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 180 |
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ |
| 181 |
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ |
| 182 |
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ |
| 183 |
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ |
| 184 |
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ |
| 185 |
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ |
| 186 |
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ |
| 187 |
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ |
| 188 |
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ |
| 189 |
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ |
| 190 |
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ |
| 191 |
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ |
| 192 |
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ |
| 193 |
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ |
| 194 |
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ |
| 195 |
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ |
| 196 |
}; |
| 197 |
|
| 198 |
pio2: ucc_pin@2 { |
| 199 |
pio-map = < |
| 200 |
/* port pin dir open_drain assignment has_irq */ |
| 201 |
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 202 |
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 203 |
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ |
| 204 |
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ |
| 205 |
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ |
| 206 |
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ |
| 207 |
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ |
| 208 |
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ |
| 209 |
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ |
| 210 |
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ |
| 211 |
}; |
| 212 |
|
| 213 |
pio3: ucc_pin@3 { |
| 214 |
pio-map = < |
| 215 |
/* port pin dir open_drain assignment has_irq */ |
| 216 |
0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ |
| 217 |
0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ |
| 218 |
0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ |
| 219 |
0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ |
| 220 |
0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ |
| 221 |
}; |
| 222 |
|
| 223 |
pio4: ucc_pin@4 { |
| 224 |
pio-map = < |
| 225 |
/* port pin dir open_drain assignment has_irq */ |
| 226 |
0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ |
| 227 |
0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ |
| 228 |
0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ |
| 229 |
0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ |
| 230 |
0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ |
| 231 |
}; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
&qe { |
| 236 |
enet3: ucc@2000 { |
| 237 |
device_type = "network"; |
| 238 |
compatible = "ucc_geth"; |
| 239 |
rx-clock-name = "clk12"; |
| 240 |
tx-clock-name = "clk9"; |
| 241 |
pio-handle = <&pio1>; |
| 242 |
phy-handle = <&qe_phy0>; |
| 243 |
phy-connection-type = "mii"; |
| 244 |
}; |
| 245 |
|
| 246 |
mdio@2120 { |
| 247 |
qe_phy0: ethernet-phy@18 { |
| 248 |
interrupt-parent = <&mpic>; |
| 249 |
interrupts = <4 1 0 0>; |
| 250 |
reg = <0x18>; |
| 251 |
device_type = "ethernet-phy"; |
| 252 |
}; |
| 253 |
qe_phy1: ethernet-phy@19 { |
| 254 |
interrupt-parent = <&mpic>; |
| 255 |
interrupts = <5 1 0 0>; |
| 256 |
reg = <0x19>; |
| 257 |
device_type = "ethernet-phy"; |
| 258 |
}; |
| 259 |
tbi-phy@11 { |
| 260 |
reg = <0x11>; |
| 261 |
device_type = "tbi-phy"; |
| 262 |
}; |
| 263 |
}; |
| 264 |
|
| 265 |
enet4: ucc@2400 { |
| 266 |
device_type = "network"; |
| 267 |
compatible = "ucc_geth"; |
| 268 |
rx-clock-name = "none"; |
| 269 |
tx-clock-name = "clk13"; |
| 270 |
pio-handle = <&pio2>; |
| 271 |
phy-handle = <&qe_phy1>; |
| 272 |
phy-connection-type = "rmii"; |
| 273 |
}; |
| 274 |
|
| 275 |
serial2: ucc@2600 { |
| 276 |
device_type = "serial"; |
| 277 |
compatible = "ucc_uart"; |
| 278 |
port-number = <0>; |
| 279 |
rx-clock-name = "brg6"; |
| 280 |
tx-clock-name = "brg6"; |
| 281 |
pio-handle = <&pio3>; |
| 282 |
}; |
| 283 |
|
| 284 |
serial3: ucc@2200 { |
| 285 |
device_type = "serial"; |
| 286 |
compatible = "ucc_uart"; |
| 287 |
port-number = <1>; |
| 288 |
rx-clock-name = "brg2"; |
| 289 |
tx-clock-name = "brg2"; |
| 290 |
pio-handle = <&pio4>; |
| 291 |
}; |
| 292 |
}; |