| 1 |
/* |
| 2 |
* P1025 RDB Device Tree Source (32-bit address map) |
| 3 |
* |
| 4 |
* Copyright 2011 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
/include/ "p1021si-pre.dtsi" |
| 36 |
/ { |
| 37 |
model = "fsl,P1025RDB"; |
| 38 |
compatible = "fsl,P1025RDB"; |
| 39 |
|
| 40 |
memory { |
| 41 |
device_type = "memory"; |
| 42 |
}; |
| 43 |
|
| 44 |
lbc: localbus@ffe05000 { |
| 45 |
reg = <0 0xffe05000 0 0x1000>; |
| 46 |
|
| 47 |
/* NOR, NAND Flashes */ |
| 48 |
ranges = <0x0 0x0 0x0 0xef000000 0x01000000 |
| 49 |
0x1 0x0 0x0 0xff800000 0x00040000>; |
| 50 |
}; |
| 51 |
|
| 52 |
soc: soc@ffe00000 { |
| 53 |
ranges = <0x0 0x0 0xffe00000 0x100000>; |
| 54 |
}; |
| 55 |
|
| 56 |
pci0: pcie@ffe09000 { |
| 57 |
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 |
| 58 |
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; |
| 59 |
reg = <0 0xffe09000 0 0x1000>; |
| 60 |
pcie@0 { |
| 61 |
ranges = <0x2000000 0x0 0xe0000000 |
| 62 |
0x2000000 0x0 0xe0000000 |
| 63 |
0x0 0x20000000 |
| 64 |
|
| 65 |
0x1000000 0x0 0x0 |
| 66 |
0x1000000 0x0 0x0 |
| 67 |
0x0 0x100000>; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
pci1: pcie@ffe0a000 { |
| 72 |
reg = <0 0xffe0a000 0 0x1000>; |
| 73 |
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 |
| 74 |
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; |
| 75 |
pcie@0 { |
| 76 |
ranges = <0x2000000 0x0 0xe0000000 |
| 77 |
0x2000000 0x0 0xe0000000 |
| 78 |
0x0 0x20000000 |
| 79 |
|
| 80 |
0x1000000 0x0 0x0 |
| 81 |
0x1000000 0x0 0x0 |
| 82 |
0x0 0x100000>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
qe: qe@ffe80000 { |
| 87 |
ranges = <0x0 0x0 0xffe80000 0x40000>; |
| 88 |
reg = <0 0xffe80000 0 0x480>; |
| 89 |
brg-frequency = <0>; |
| 90 |
bus-frequency = <0>; |
| 91 |
status = "disabled"; /* no firmware loaded */ |
| 92 |
|
| 93 |
enet3: ucc@2000 { |
| 94 |
device_type = "network"; |
| 95 |
compatible = "ucc_geth"; |
| 96 |
rx-clock-name = "clk12"; |
| 97 |
tx-clock-name = "clk9"; |
| 98 |
pio-handle = <&pio1>; |
| 99 |
phy-handle = <&qe_phy0>; |
| 100 |
phy-connection-type = "mii"; |
| 101 |
}; |
| 102 |
|
| 103 |
mdio@2120 { |
| 104 |
qe_phy0: ethernet-phy@0 { |
| 105 |
interrupt-parent = <&mpic>; |
| 106 |
interrupts = <4 1 0 0>; |
| 107 |
reg = <0x6>; |
| 108 |
}; |
| 109 |
qe_phy1: ethernet-phy@3 { |
| 110 |
interrupt-parent = <&mpic>; |
| 111 |
interrupts = <5 1 0 0>; |
| 112 |
reg = <0x3>; |
| 113 |
}; |
| 114 |
tbi-phy@11 { |
| 115 |
reg = <0x11>; |
| 116 |
device_type = "tbi-phy"; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
enet4: ucc@2400 { |
| 121 |
device_type = "network"; |
| 122 |
compatible = "ucc_geth"; |
| 123 |
rx-clock-name = "none"; |
| 124 |
tx-clock-name = "clk13"; |
| 125 |
pio-handle = <&pio2>; |
| 126 |
phy-handle = <&qe_phy1>; |
| 127 |
phy-connection-type = "rmii"; |
| 128 |
}; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
/include/ "p1025rdb.dtsi" |
| 133 |
/include/ "p1021si-post.dtsi" |