| 1 |
/* |
| 2 |
* P1022/P1013 Silicon/SoC Device Tree Source (post include) |
| 3 |
* |
| 4 |
* Copyright 2011 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
&lbc { |
| 36 |
#address-cells = <2>; |
| 37 |
#size-cells = <1>; |
| 38 |
/* |
| 39 |
* The localbus on the P1022 is not a simple-bus because of the eLBC |
| 40 |
* pin muxing when the DIU is enabled. |
| 41 |
*/ |
| 42 |
compatible = "fsl,p1022-elbc", "fsl,elbc"; |
| 43 |
interrupts = <19 2 0 0>, |
| 44 |
<16 2 0 0>; |
| 45 |
}; |
| 46 |
|
| 47 |
/* controller at 0x9000 */ |
| 48 |
&pci0 { |
| 49 |
compatible = "fsl,mpc8548-pcie"; |
| 50 |
device_type = "pci"; |
| 51 |
#size-cells = <2>; |
| 52 |
#address-cells = <3>; |
| 53 |
bus-range = <0 255>; |
| 54 |
clock-frequency = <33333333>; |
| 55 |
interrupts = <16 2 0 0>; |
| 56 |
|
| 57 |
pcie@0 { |
| 58 |
reg = <0 0 0 0 0>; |
| 59 |
#interrupt-cells = <1>; |
| 60 |
#size-cells = <2>; |
| 61 |
#address-cells = <3>; |
| 62 |
device_type = "pci"; |
| 63 |
interrupts = <16 2 0 0>; |
| 64 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 65 |
interrupt-map = < |
| 66 |
/* IDSEL 0x0 */ |
| 67 |
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 |
| 68 |
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 |
| 69 |
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 |
| 70 |
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 |
| 71 |
>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
/* controller at 0xa000 */ |
| 76 |
&pci1 { |
| 77 |
compatible = "fsl,mpc8548-pcie"; |
| 78 |
device_type = "pci"; |
| 79 |
#size-cells = <2>; |
| 80 |
#address-cells = <3>; |
| 81 |
bus-range = <0 255>; |
| 82 |
clock-frequency = <33333333>; |
| 83 |
interrupts = <16 2 0 0>; |
| 84 |
|
| 85 |
pcie@0 { |
| 86 |
reg = <0 0 0 0 0>; |
| 87 |
#interrupt-cells = <1>; |
| 88 |
#size-cells = <2>; |
| 89 |
#address-cells = <3>; |
| 90 |
device_type = "pci"; |
| 91 |
interrupts = <16 2 0 0>; |
| 92 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 93 |
|
| 94 |
interrupt-map = < |
| 95 |
/* IDSEL 0x0 */ |
| 96 |
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 |
| 97 |
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 |
| 98 |
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 |
| 99 |
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 |
| 100 |
>; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
/* controller at 0xb000 */ |
| 105 |
&pci2 { |
| 106 |
compatible = "fsl,mpc8548-pcie"; |
| 107 |
device_type = "pci"; |
| 108 |
#size-cells = <2>; |
| 109 |
#address-cells = <3>; |
| 110 |
bus-range = <0 255>; |
| 111 |
clock-frequency = <33333333>; |
| 112 |
interrupts = <16 2 0 0>; |
| 113 |
|
| 114 |
pcie@0 { |
| 115 |
reg = <0 0 0 0 0>; |
| 116 |
#interrupt-cells = <1>; |
| 117 |
#size-cells = <2>; |
| 118 |
#address-cells = <3>; |
| 119 |
device_type = "pci"; |
| 120 |
interrupts = <16 2 0 0>; |
| 121 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 122 |
|
| 123 |
interrupt-map = < |
| 124 |
/* IDSEL 0x0 */ |
| 125 |
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 |
| 126 |
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 |
| 127 |
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 |
| 128 |
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 |
| 129 |
>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&soc { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <1>; |
| 136 |
device_type = "soc"; |
| 137 |
compatible = "fsl,p1022-immr", "simple-bus"; |
| 138 |
bus-frequency = <0>; // Filled out by uboot. |
| 139 |
|
| 140 |
ecm-law@0 { |
| 141 |
compatible = "fsl,ecm-law"; |
| 142 |
reg = <0x0 0x1000>; |
| 143 |
fsl,num-laws = <12>; |
| 144 |
}; |
| 145 |
|
| 146 |
ecm@1000 { |
| 147 |
compatible = "fsl,p1022-ecm", "fsl,ecm"; |
| 148 |
reg = <0x1000 0x1000>; |
| 149 |
interrupts = <16 2 0 0>; |
| 150 |
}; |
| 151 |
|
| 152 |
memory-controller@2000 { |
| 153 |
compatible = "fsl,p1022-memory-controller"; |
| 154 |
reg = <0x2000 0x1000>; |
| 155 |
interrupts = <16 2 0 0>; |
| 156 |
}; |
| 157 |
|
| 158 |
/include/ "pq3-i2c-0.dtsi" |
| 159 |
/include/ "pq3-i2c-1.dtsi" |
| 160 |
/include/ "pq3-duart-0.dtsi" |
| 161 |
/include/ "pq3-espi-0.dtsi" |
| 162 |
spi@7000 { |
| 163 |
fsl,espi-num-chipselects = <4>; |
| 164 |
}; |
| 165 |
|
| 166 |
/include/ "pq3-dma-1.dtsi" |
| 167 |
dma@c300 { |
| 168 |
dma00: dma-channel@0 { |
| 169 |
compatible = "fsl,ssi-dma-channel"; |
| 170 |
}; |
| 171 |
dma01: dma-channel@80 { |
| 172 |
compatible = "fsl,ssi-dma-channel"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
/include/ "pq3-gpio-0.dtsi" |
| 177 |
|
| 178 |
display: display@10000 { |
| 179 |
compatible = "fsl,diu", "fsl,p1022-diu"; |
| 180 |
reg = <0x10000 1000>; |
| 181 |
interrupts = <64 2 0 0>; |
| 182 |
}; |
| 183 |
|
| 184 |
ssi@15000 { |
| 185 |
compatible = "fsl,mpc8610-ssi"; |
| 186 |
cell-index = <0>; |
| 187 |
reg = <0x15000 0x100>; |
| 188 |
interrupts = <75 2 0 0>; |
| 189 |
fsl,playback-dma = <&dma00>; |
| 190 |
fsl,capture-dma = <&dma01>; |
| 191 |
fsl,fifo-depth = <15>; |
| 192 |
}; |
| 193 |
|
| 194 |
/include/ "pq3-sata2-0.dtsi" |
| 195 |
/include/ "pq3-sata2-1.dtsi" |
| 196 |
|
| 197 |
L2: l2-cache-controller@20000 { |
| 198 |
compatible = "fsl,p1022-l2-cache-controller"; |
| 199 |
reg = <0x20000 0x1000>; |
| 200 |
cache-line-size = <32>; // 32 bytes |
| 201 |
cache-size = <0x40000>; // L2,256K |
| 202 |
interrupts = <16 2 0 0>; |
| 203 |
}; |
| 204 |
|
| 205 |
/include/ "pq3-dma-0.dtsi" |
| 206 |
/include/ "pq3-usb2-dr-0.dtsi" |
| 207 |
usb@22000 { |
| 208 |
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; |
| 209 |
}; |
| 210 |
/include/ "pq3-usb2-dr-1.dtsi" |
| 211 |
usb@23000 { |
| 212 |
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; |
| 213 |
}; |
| 214 |
|
| 215 |
/include/ "pq3-esdhc-0.dtsi" |
| 216 |
sdhc@2e000 { |
| 217 |
compatible = "fsl,p1022-esdhc", "fsl,esdhc"; |
| 218 |
sdhci,auto-cmd12; |
| 219 |
}; |
| 220 |
|
| 221 |
/include/ "pq3-sec3.3-0.dtsi" |
| 222 |
/include/ "pq3-mpic.dtsi" |
| 223 |
/include/ "pq3-mpic-timer-B.dtsi" |
| 224 |
|
| 225 |
/include/ "pq3-etsec2-0.dtsi" |
| 226 |
enet0: enet0_grp2: ethernet@b0000 { |
| 227 |
fsl,wake-on-filer; |
| 228 |
fsl,pmc-handle = <&etsec1_clk>; |
| 229 |
}; |
| 230 |
|
| 231 |
/include/ "pq3-etsec2-1.dtsi" |
| 232 |
enet1: enet1_grp2: ethernet@b1000 { |
| 233 |
fsl,wake-on-filer; |
| 234 |
fsl,pmc-handle = <&etsec2_clk>; |
| 235 |
}; |
| 236 |
|
| 237 |
global-utilities@e0000 { |
| 238 |
compatible = "fsl,p1022-guts"; |
| 239 |
reg = <0xe0000 0x1000>; |
| 240 |
fsl,has-rstcr; |
| 241 |
}; |
| 242 |
|
| 243 |
/include/ "pq3-power.dtsi" |
| 244 |
power@e0070 { |
| 245 |
compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc", |
| 246 |
"fsl,mpc8548-pmc"; |
| 247 |
}; |
| 248 |
|
| 249 |
}; |
| 250 |
|
| 251 |
/include/ "pq3-etsec2-grp2-0.dtsi" |
| 252 |
/include/ "pq3-etsec2-grp2-1.dtsi" |