| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* P1021 MDS Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2010,2012 Freescale Semiconductor Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
/include/ "p1021si-pre.dtsi" |
| 9 |
/ { |
| 10 |
model = "fsl,P1021"; |
| 11 |
compatible = "fsl,P1021MDS"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
ethernet3 = &enet3; |
| 15 |
ethernet4 = &enet4; |
| 16 |
}; |
| 17 |
|
| 18 |
memory { |
| 19 |
device_type = "memory"; |
| 20 |
}; |
| 21 |
|
| 22 |
lbc: localbus@ffe05000 { |
| 23 |
reg = <0x0 0xffe05000 0x0 0x1000>; |
| 24 |
|
| 25 |
/* NAND Flash, BCSR, PMC0/1*/ |
| 26 |
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 |
| 27 |
0x1 0x0 0x0 0xf8000000 0x00008000 |
| 28 |
0x2 0x0 0x0 0xf8010000 0x00020000 |
| 29 |
0x3 0x0 0x0 0xf8020000 0x00020000>; |
| 30 |
|
| 31 |
nand@0,0 { |
| 32 |
#address-cells = <1>; |
| 33 |
#size-cells = <1>; |
| 34 |
compatible = "fsl,p1021-fcm-nand", |
| 35 |
"fsl,elbc-fcm-nand"; |
| 36 |
reg = <0x0 0x0 0x40000>; |
| 37 |
|
| 38 |
partition@0 { |
| 39 |
/* This location must not be altered */ |
| 40 |
/* 1MB for u-boot Bootloader Image */ |
| 41 |
reg = <0x0 0x00100000>; |
| 42 |
label = "NAND (RO) U-Boot Image"; |
| 43 |
read-only; |
| 44 |
}; |
| 45 |
|
| 46 |
partition@100000 { |
| 47 |
/* 1MB for DTB Image */ |
| 48 |
reg = <0x00100000 0x00100000>; |
| 49 |
label = "NAND (RO) DTB Image"; |
| 50 |
read-only; |
| 51 |
}; |
| 52 |
|
| 53 |
partition@200000 { |
| 54 |
/* 4MB for Linux Kernel Image */ |
| 55 |
reg = <0x00200000 0x00400000>; |
| 56 |
label = "NAND (RO) Linux Kernel Image"; |
| 57 |
read-only; |
| 58 |
}; |
| 59 |
|
| 60 |
partition@600000 { |
| 61 |
/* 5MB for Compressed Root file System Image */ |
| 62 |
reg = <0x00600000 0x00500000>; |
| 63 |
label = "NAND (RO) Compressed RFS Image"; |
| 64 |
read-only; |
| 65 |
}; |
| 66 |
|
| 67 |
partition@b00000 { |
| 68 |
/* 6MB for JFFS2 based Root file System */ |
| 69 |
reg = <0x00a00000 0x00600000>; |
| 70 |
label = "NAND (RW) JFFS2 Root File System"; |
| 71 |
}; |
| 72 |
|
| 73 |
partition@1100000 { |
| 74 |
/* 14MB for JFFS2 based Root file System */ |
| 75 |
reg = <0x01100000 0x00e00000>; |
| 76 |
label = "NAND (RW) Writable User area"; |
| 77 |
}; |
| 78 |
|
| 79 |
partition@1f00000 { |
| 80 |
/* 1MB for microcode */ |
| 81 |
reg = <0x01f00000 0x00100000>; |
| 82 |
label = "NAND (RO) QE Ucode"; |
| 83 |
read-only; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
bcsr@1,0 { |
| 88 |
#address-cells = <1>; |
| 89 |
#size-cells = <1>; |
| 90 |
compatible = "fsl,p1021mds-bcsr"; |
| 91 |
reg = <1 0 0x8000>; |
| 92 |
ranges = <0 1 0 0x8000>; |
| 93 |
}; |
| 94 |
|
| 95 |
pib@2,0 { |
| 96 |
compatible = "fsl,p1021mds-pib"; |
| 97 |
reg = <2 0 0x10000>; |
| 98 |
}; |
| 99 |
|
| 100 |
pib@3,0 { |
| 101 |
compatible = "fsl,p1021mds-pib"; |
| 102 |
reg = <3 0 0x10000>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
soc: soc@ffe00000 { |
| 107 |
compatible = "fsl,p1021-immr", "simple-bus"; |
| 108 |
ranges = <0x0 0x0 0xffe00000 0x100000>; |
| 109 |
|
| 110 |
i2c@3000 { |
| 111 |
rtc@68 { |
| 112 |
compatible = "dallas,ds1374"; |
| 113 |
reg = <0x68>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
spi@7000 { |
| 118 |
|
| 119 |
flash@0 { |
| 120 |
#address-cells = <1>; |
| 121 |
#size-cells = <1>; |
| 122 |
compatible = "spansion,s25sl12801", "jedec,spi-nor"; |
| 123 |
reg = <0>; |
| 124 |
spi-max-frequency = <40000000>; /* input clock */ |
| 125 |
|
| 126 |
partition@u-boot { |
| 127 |
label = "u-boot-spi"; |
| 128 |
reg = <0x00000000 0x00100000>; |
| 129 |
read-only; |
| 130 |
}; |
| 131 |
partition@kernel { |
| 132 |
label = "kernel-spi"; |
| 133 |
reg = <0x00100000 0x00500000>; |
| 134 |
read-only; |
| 135 |
}; |
| 136 |
partition@dtb { |
| 137 |
label = "dtb-spi"; |
| 138 |
reg = <0x00600000 0x00100000>; |
| 139 |
read-only; |
| 140 |
}; |
| 141 |
partition@fs { |
| 142 |
label = "file system-spi"; |
| 143 |
reg = <0x00700000 0x00900000>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
usb@22000 { |
| 149 |
phy_type = "ulpi"; |
| 150 |
dr_mode = "host"; |
| 151 |
}; |
| 152 |
|
| 153 |
mdio@24000 { |
| 154 |
phy0: ethernet-phy@0 { |
| 155 |
interrupts = <1 1 0 0>; |
| 156 |
reg = <0x0>; |
| 157 |
}; |
| 158 |
phy1: ethernet-phy@1 { |
| 159 |
interrupts = <2 1 0 0>; |
| 160 |
reg = <0x1>; |
| 161 |
}; |
| 162 |
phy4: ethernet-phy@4 { |
| 163 |
reg = <0x4>; |
| 164 |
}; |
| 165 |
tbi-phy@5 { |
| 166 |
device_type = "tbi-phy"; |
| 167 |
reg = <0x5>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
|
| 171 |
mdio@25000 { |
| 172 |
tbi0: tbi-phy@11 { |
| 173 |
reg = <0x11>; |
| 174 |
device_type = "tbi-phy"; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
ethernet@b0000 { |
| 179 |
phy-handle = <&phy0>; |
| 180 |
phy-connection-type = "rgmii-id"; |
| 181 |
}; |
| 182 |
|
| 183 |
ethernet@b1000 { |
| 184 |
phy-handle = <&phy4>; |
| 185 |
tbi-handle = <&tbi0>; |
| 186 |
phy-connection-type = "sgmii"; |
| 187 |
}; |
| 188 |
|
| 189 |
ethernet@b2000 { |
| 190 |
phy-handle = <&phy1>; |
| 191 |
phy-connection-type = "rgmii-id"; |
| 192 |
}; |
| 193 |
|
| 194 |
par_io@e0100 { |
| 195 |
#address-cells = <1>; |
| 196 |
#size-cells = <1>; |
| 197 |
reg = <0xe0100 0x60>; |
| 198 |
ranges = <0x0 0xe0100 0x60>; |
| 199 |
device_type = "par_io"; |
| 200 |
num-ports = <3>; |
| 201 |
pio1: ucc_pin@1 { |
| 202 |
pio-map = < |
| 203 |
/* port pin dir open_drain assignment has_irq */ |
| 204 |
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 205 |
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 206 |
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ |
| 207 |
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ |
| 208 |
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ |
| 209 |
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ |
| 210 |
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ |
| 211 |
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ |
| 212 |
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ |
| 213 |
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ |
| 214 |
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ |
| 215 |
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ |
| 216 |
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ |
| 217 |
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ |
| 218 |
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ |
| 219 |
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ |
| 220 |
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ |
| 221 |
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ |
| 222 |
}; |
| 223 |
|
| 224 |
pio2: ucc_pin@2 { |
| 225 |
pio-map = < |
| 226 |
/* port pin dir open_drain assignment has_irq */ |
| 227 |
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 228 |
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 229 |
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ |
| 230 |
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ |
| 231 |
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ |
| 232 |
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ |
| 233 |
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ |
| 234 |
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ |
| 235 |
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ |
| 236 |
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ |
| 237 |
}; |
| 238 |
}; |
| 239 |
}; |
| 240 |
|
| 241 |
pci0: pcie@ffe09000 { |
| 242 |
reg = <0 0xffe09000 0 0x1000>; |
| 243 |
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 |
| 244 |
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; |
| 245 |
pcie@0 { |
| 246 |
ranges = <0x2000000 0x0 0xa0000000 |
| 247 |
0x2000000 0x0 0xa0000000 |
| 248 |
0x0 0x20000000 |
| 249 |
|
| 250 |
0x1000000 0x0 0x0 |
| 251 |
0x1000000 0x0 0x0 |
| 252 |
0x0 0x100000>; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
pci1: pcie@ffe0a000 { |
| 257 |
reg = <0 0xffe0a000 0 0x1000>; |
| 258 |
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 |
| 259 |
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; |
| 260 |
pcie@0 { |
| 261 |
ranges = <0x2000000 0x0 0xc0000000 |
| 262 |
0x2000000 0x0 0xc0000000 |
| 263 |
0x0 0x20000000 |
| 264 |
|
| 265 |
0x1000000 0x0 0x0 |
| 266 |
0x1000000 0x0 0x0 |
| 267 |
0x0 0x100000>; |
| 268 |
}; |
| 269 |
}; |
| 270 |
|
| 271 |
qe: qe@ffe80000 { |
| 272 |
ranges = <0x0 0x0 0xffe80000 0x40000>; |
| 273 |
reg = <0 0xffe80000 0 0x480>; |
| 274 |
brg-frequency = <0>; |
| 275 |
bus-frequency = <0>; |
| 276 |
status = "disabled"; /* no firmware loaded */ |
| 277 |
|
| 278 |
enet3: ucc@2000 { |
| 279 |
device_type = "network"; |
| 280 |
compatible = "ucc_geth"; |
| 281 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 282 |
rx-clock-name = "clk12"; |
| 283 |
tx-clock-name = "clk9"; |
| 284 |
pio-handle = <&pio1>; |
| 285 |
phy-handle = <&qe_phy0>; |
| 286 |
phy-connection-type = "mii"; |
| 287 |
}; |
| 288 |
|
| 289 |
mdio@2120 { |
| 290 |
qe_phy0: ethernet-phy@0 { |
| 291 |
interrupt-parent = <&mpic>; |
| 292 |
interrupts = <4 1 0 0>; |
| 293 |
reg = <0x0>; |
| 294 |
}; |
| 295 |
qe_phy1: ethernet-phy@3 { |
| 296 |
interrupt-parent = <&mpic>; |
| 297 |
interrupts = <5 1 0 0>; |
| 298 |
reg = <0x3>; |
| 299 |
}; |
| 300 |
tbi-phy@11 { |
| 301 |
reg = <0x11>; |
| 302 |
device_type = "tbi-phy"; |
| 303 |
}; |
| 304 |
}; |
| 305 |
|
| 306 |
enet4: ucc@2400 { |
| 307 |
device_type = "network"; |
| 308 |
compatible = "ucc_geth"; |
| 309 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 310 |
rx-clock-name = "none"; |
| 311 |
tx-clock-name = "clk13"; |
| 312 |
pio-handle = <&pio2>; |
| 313 |
phy-handle = <&qe_phy1>; |
| 314 |
phy-connection-type = "rmii"; |
| 315 |
}; |
| 316 |
}; |
| 317 |
}; |
| 318 |
|
| 319 |
/include/ "p1021si-post.dtsi" |