| 1 |
/* |
| 2 |
* P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) |
| 3 |
* |
| 4 |
* Copyright 2012 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
&lbc { |
| 36 |
nor@0,0 { |
| 37 |
#address-cells = <1>; |
| 38 |
#size-cells = <1>; |
| 39 |
compatible = "cfi-flash"; |
| 40 |
reg = <0x0 0x0 0x1000000>; |
| 41 |
bank-width = <2>; |
| 42 |
device-width = <1>; |
| 43 |
|
| 44 |
partition@0 { |
| 45 |
/* This location must not be altered */ |
| 46 |
/* 256KB for Vitesse 7385 Switch firmware */ |
| 47 |
reg = <0x0 0x00040000>; |
| 48 |
label = "NOR Vitesse-7385 Firmware"; |
| 49 |
read-only; |
| 50 |
}; |
| 51 |
|
| 52 |
partition@40000 { |
| 53 |
/* 256KB for DTB Image */ |
| 54 |
reg = <0x00040000 0x00040000>; |
| 55 |
label = "NOR DTB Image"; |
| 56 |
}; |
| 57 |
|
| 58 |
partition@80000 { |
| 59 |
/* 3.5 MB for Linux Kernel Image */ |
| 60 |
reg = <0x00080000 0x00380000>; |
| 61 |
label = "NOR Linux Kernel Image"; |
| 62 |
}; |
| 63 |
|
| 64 |
partition@400000 { |
| 65 |
/* 11MB for JFFS2 based Root file System */ |
| 66 |
reg = <0x00400000 0x00b00000>; |
| 67 |
label = "NOR JFFS2 Root File System"; |
| 68 |
}; |
| 69 |
|
| 70 |
partition@f00000 { |
| 71 |
/* This location must not be altered */ |
| 72 |
/* 512KB for u-boot Bootloader Image */ |
| 73 |
/* 512KB for u-boot Environment Variables */ |
| 74 |
reg = <0x00f00000 0x00100000>; |
| 75 |
label = "NOR U-Boot Image"; |
| 76 |
read-only; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
nand@1,0 { |
| 81 |
#address-cells = <1>; |
| 82 |
#size-cells = <1>; |
| 83 |
compatible = "fsl,p1020-fcm-nand", |
| 84 |
"fsl,elbc-fcm-nand"; |
| 85 |
reg = <0x1 0x0 0x40000>; |
| 86 |
|
| 87 |
partition@0 { |
| 88 |
/* This location must not be altered */ |
| 89 |
/* 1MB for u-boot Bootloader Image */ |
| 90 |
reg = <0x0 0x00100000>; |
| 91 |
label = "NAND U-Boot Image"; |
| 92 |
read-only; |
| 93 |
}; |
| 94 |
|
| 95 |
partition@100000 { |
| 96 |
/* 1MB for DTB Image */ |
| 97 |
reg = <0x00100000 0x00100000>; |
| 98 |
label = "NAND DTB Image"; |
| 99 |
}; |
| 100 |
|
| 101 |
partition@200000 { |
| 102 |
/* 4MB for Linux Kernel Image */ |
| 103 |
reg = <0x00200000 0x00400000>; |
| 104 |
label = "NAND Linux Kernel Image"; |
| 105 |
}; |
| 106 |
|
| 107 |
partition@600000 { |
| 108 |
/* 4MB for Compressed Root file System Image */ |
| 109 |
reg = <0x00600000 0x00400000>; |
| 110 |
label = "NAND Compressed RFS Image"; |
| 111 |
}; |
| 112 |
|
| 113 |
partition@a00000 { |
| 114 |
/* 7MB for JFFS2 based Root file System */ |
| 115 |
reg = <0x00a00000 0x00700000>; |
| 116 |
label = "NAND JFFS2 Root File System"; |
| 117 |
}; |
| 118 |
|
| 119 |
partition@1100000 { |
| 120 |
/* 15MB for JFFS2 based Root file System */ |
| 121 |
reg = <0x01100000 0x00f00000>; |
| 122 |
label = "NAND Writable User area"; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
L2switch@2,0 { |
| 127 |
#address-cells = <1>; |
| 128 |
#size-cells = <1>; |
| 129 |
compatible = "vitesse-7385"; |
| 130 |
reg = <0x2 0x0 0x20000>; |
| 131 |
}; |
| 132 |
|
| 133 |
cpld@3,0 { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <1>; |
| 136 |
compatible = "cpld"; |
| 137 |
reg = <0x3 0x0 0x20000>; |
| 138 |
read-only; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
&soc { |
| 143 |
i2c@3000 { |
| 144 |
rtc@68 { |
| 145 |
compatible = "pericom,pt7c4338"; |
| 146 |
reg = <0x68>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
spi@7000 { |
| 151 |
flash@0 { |
| 152 |
#address-cells = <1>; |
| 153 |
#size-cells = <1>; |
| 154 |
compatible = "spansion,s25sl12801", "jedec,spi-nor"; |
| 155 |
reg = <0>; |
| 156 |
spi-max-frequency = <40000000>; /* input clock */ |
| 157 |
|
| 158 |
partition@u-boot { |
| 159 |
/* 512KB for u-boot Bootloader Image */ |
| 160 |
reg = <0x0 0x00080000>; |
| 161 |
label = "u-boot"; |
| 162 |
read-only; |
| 163 |
}; |
| 164 |
|
| 165 |
partition@dtb { |
| 166 |
/* 512KB for DTB Image*/ |
| 167 |
reg = <0x00080000 0x00080000>; |
| 168 |
label = "dtb"; |
| 169 |
}; |
| 170 |
|
| 171 |
partition@kernel { |
| 172 |
/* 4MB for Linux Kernel Image */ |
| 173 |
reg = <0x00100000 0x00400000>; |
| 174 |
label = "kernel"; |
| 175 |
}; |
| 176 |
|
| 177 |
partition@fs { |
| 178 |
/* 4MB for Compressed RFS Image */ |
| 179 |
reg = <0x00500000 0x00400000>; |
| 180 |
label = "file system"; |
| 181 |
}; |
| 182 |
|
| 183 |
partition@jffs-fs { |
| 184 |
/* 7MB for JFFS2 based RFS */ |
| 185 |
reg = <0x00900000 0x00700000>; |
| 186 |
label = "file system jffs2"; |
| 187 |
}; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
usb@22000 { |
| 192 |
phy_type = "ulpi"; |
| 193 |
}; |
| 194 |
|
| 195 |
/* USB2 is shared with localbus, so it must be disabled |
| 196 |
by default. We can't put 'status = "disabled";' here |
| 197 |
since U-Boot doesn't clear the status property when |
| 198 |
it enables USB2. OTOH, U-Boot does create a new node |
| 199 |
when there isn't any. So, just comment it out. |
| 200 |
usb@23000 { |
| 201 |
phy_type = "ulpi"; |
| 202 |
}; |
| 203 |
*/ |
| 204 |
|
| 205 |
mdio@24000 { |
| 206 |
phy0: ethernet-phy@0 { |
| 207 |
interrupt-parent = <&mpic>; |
| 208 |
interrupts = <3 1 0 0>; |
| 209 |
reg = <0x0>; |
| 210 |
}; |
| 211 |
|
| 212 |
phy1: ethernet-phy@1 { |
| 213 |
interrupt-parent = <&mpic>; |
| 214 |
interrupts = <2 1 0 0>; |
| 215 |
reg = <0x1>; |
| 216 |
}; |
| 217 |
|
| 218 |
tbi0: tbi-phy@11 { |
| 219 |
device_type = "tbi-phy"; |
| 220 |
reg = <0x11>; |
| 221 |
}; |
| 222 |
}; |
| 223 |
|
| 224 |
mdio@25000 { |
| 225 |
tbi1: tbi-phy@11 { |
| 226 |
reg = <0x11>; |
| 227 |
device_type = "tbi-phy"; |
| 228 |
}; |
| 229 |
}; |
| 230 |
|
| 231 |
enet0: ethernet@b0000 { |
| 232 |
fixed-link = <1 1 1000 0 0>; |
| 233 |
phy-connection-type = "rgmii-id"; |
| 234 |
|
| 235 |
}; |
| 236 |
|
| 237 |
enet1: ethernet@b1000 { |
| 238 |
phy-handle = <&phy0>; |
| 239 |
tbi-handle = <&tbi1>; |
| 240 |
phy-connection-type = "sgmii"; |
| 241 |
}; |
| 242 |
|
| 243 |
enet2: ethernet@b2000 { |
| 244 |
phy-handle = <&phy1>; |
| 245 |
phy-connection-type = "rgmii-id"; |
| 246 |
}; |
| 247 |
}; |