| 1 |
/* |
| 2 |
* MPC8568 Silicon/SoC Device Tree Source (post include) |
| 3 |
* |
| 4 |
* Copyright 2011 Freescale Semiconductor Inc. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions are met: |
| 8 |
* * Redistributions of source code must retain the above copyright |
| 9 |
* notice, this list of conditions and the following disclaimer. |
| 10 |
* * Redistributions in binary form must reproduce the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer in the |
| 12 |
* documentation and/or other materials provided with the distribution. |
| 13 |
* * Neither the name of Freescale Semiconductor nor the |
| 14 |
* names of its contributors may be used to endorse or promote products |
| 15 |
* derived from this software without specific prior written permission. |
| 16 |
* |
| 17 |
* |
| 18 |
* ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 |
* GNU General Public License ("GPL") as published by the Free Software |
| 20 |
* Foundation, either version 2 of that License or (at your option) any |
| 21 |
* later version. |
| 22 |
* |
| 23 |
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 |
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 |
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 |
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 |
*/ |
| 34 |
|
| 35 |
&lbc { |
| 36 |
#address-cells = <2>; |
| 37 |
#size-cells = <1>; |
| 38 |
compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; |
| 39 |
interrupts = <19 2 0 0>; |
| 40 |
sleep = <&pmc 0x08000000>; |
| 41 |
}; |
| 42 |
|
| 43 |
/* controller at 0x8000 */ |
| 44 |
&pci0 { |
| 45 |
compatible = "fsl,mpc8540-pci"; |
| 46 |
device_type = "pci"; |
| 47 |
interrupts = <24 0x2 0 0>; |
| 48 |
bus-range = <0 0xff>; |
| 49 |
#interrupt-cells = <1>; |
| 50 |
#size-cells = <2>; |
| 51 |
#address-cells = <3>; |
| 52 |
sleep = <&pmc 0x80000000>; |
| 53 |
}; |
| 54 |
|
| 55 |
/* controller at 0xa000 */ |
| 56 |
&pci1 { |
| 57 |
compatible = "fsl,mpc8548-pcie"; |
| 58 |
device_type = "pci"; |
| 59 |
#size-cells = <2>; |
| 60 |
#address-cells = <3>; |
| 61 |
bus-range = <0 255>; |
| 62 |
clock-frequency = <33333333>; |
| 63 |
interrupts = <26 2 0 0>; |
| 64 |
sleep = <&pmc 0x20000000>; |
| 65 |
|
| 66 |
pcie@0 { |
| 67 |
reg = <0 0 0 0 0>; |
| 68 |
#interrupt-cells = <1>; |
| 69 |
#size-cells = <2>; |
| 70 |
#address-cells = <3>; |
| 71 |
device_type = "pci"; |
| 72 |
interrupts = <26 2 0 0>; |
| 73 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 74 |
interrupt-map = < |
| 75 |
/* IDSEL 0x0 */ |
| 76 |
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 |
| 77 |
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 |
| 78 |
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 |
| 79 |
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 |
| 80 |
>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
&rio { |
| 85 |
compatible = "fsl,srio"; |
| 86 |
interrupts = <48 2 0 0>; |
| 87 |
#address-cells = <2>; |
| 88 |
#size-cells = <2>; |
| 89 |
fsl,srio-rmu-handle = <&rmu>; |
| 90 |
sleep = <&pmc 0x00080000>; |
| 91 |
ranges; |
| 92 |
|
| 93 |
port1 { |
| 94 |
#address-cells = <2>; |
| 95 |
#size-cells = <2>; |
| 96 |
cell-index = <1>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
&soc { |
| 101 |
#address-cells = <1>; |
| 102 |
#size-cells = <1>; |
| 103 |
device_type = "soc"; |
| 104 |
compatible = "fsl,mpc8568-immr", "simple-bus"; |
| 105 |
bus-frequency = <0>; // Filled out by uboot. |
| 106 |
|
| 107 |
ecm-law@0 { |
| 108 |
compatible = "fsl,ecm-law"; |
| 109 |
reg = <0x0 0x1000>; |
| 110 |
fsl,num-laws = <10>; |
| 111 |
}; |
| 112 |
|
| 113 |
ecm@1000 { |
| 114 |
compatible = "fsl,mpc8568-ecm", "fsl,ecm"; |
| 115 |
reg = <0x1000 0x1000>; |
| 116 |
interrupts = <17 2 0 0>; |
| 117 |
}; |
| 118 |
|
| 119 |
memory-controller@2000 { |
| 120 |
compatible = "fsl,mpc8568-memory-controller"; |
| 121 |
reg = <0x2000 0x1000>; |
| 122 |
interrupts = <18 2 0 0>; |
| 123 |
}; |
| 124 |
|
| 125 |
i2c-sleep-nexus { |
| 126 |
#address-cells = <1>; |
| 127 |
#size-cells = <1>; |
| 128 |
compatible = "simple-bus"; |
| 129 |
sleep = <&pmc 0x00000004>; |
| 130 |
ranges; |
| 131 |
|
| 132 |
/include/ "pq3-i2c-0.dtsi" |
| 133 |
/include/ "pq3-i2c-1.dtsi" |
| 134 |
|
| 135 |
}; |
| 136 |
|
| 137 |
duart-sleep-nexus { |
| 138 |
#address-cells = <1>; |
| 139 |
#size-cells = <1>; |
| 140 |
compatible = "simple-bus"; |
| 141 |
sleep = <&pmc 0x00000002>; |
| 142 |
ranges; |
| 143 |
|
| 144 |
/include/ "pq3-duart-0.dtsi" |
| 145 |
|
| 146 |
}; |
| 147 |
|
| 148 |
L2: l2-cache-controller@20000 { |
| 149 |
compatible = "fsl,mpc8568-l2-cache-controller"; |
| 150 |
reg = <0x20000 0x1000>; |
| 151 |
cache-line-size = <32>; // 32 bytes |
| 152 |
cache-size = <0x80000>; // L2, 512K |
| 153 |
interrupts = <16 2 0 0>; |
| 154 |
}; |
| 155 |
|
| 156 |
/include/ "pq3-dma-0.dtsi" |
| 157 |
dma@21300 { |
| 158 |
sleep = <&pmc 0x00000400>; |
| 159 |
}; |
| 160 |
|
| 161 |
/include/ "pq3-etsec1-0.dtsi" |
| 162 |
ethernet@24000 { |
| 163 |
sleep = <&pmc 0x00000080>; |
| 164 |
}; |
| 165 |
|
| 166 |
/include/ "pq3-etsec1-1.dtsi" |
| 167 |
ethernet@25000 { |
| 168 |
sleep = <&pmc 0x00000040>; |
| 169 |
}; |
| 170 |
|
| 171 |
par_io@e0100 { |
| 172 |
reg = <0xe0100 0x100>; |
| 173 |
device_type = "par_io"; |
| 174 |
}; |
| 175 |
|
| 176 |
/include/ "pq3-sec2.1-0.dtsi" |
| 177 |
crypto@30000 { |
| 178 |
sleep = <&pmc 0x01000000>; |
| 179 |
}; |
| 180 |
|
| 181 |
/include/ "pq3-mpic.dtsi" |
| 182 |
/include/ "pq3-rmu-0.dtsi" |
| 183 |
rmu@d3000 { |
| 184 |
sleep = <&pmc 0x00040000>; |
| 185 |
}; |
| 186 |
|
| 187 |
global-utilities@e0000 { |
| 188 |
#address-cells = <1>; |
| 189 |
#size-cells = <1>; |
| 190 |
compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; |
| 191 |
reg = <0xe0000 0x1000>; |
| 192 |
ranges = <0 0xe0000 0x1000>; |
| 193 |
fsl,has-rstcr; |
| 194 |
|
| 195 |
pmc: power@70 { |
| 196 |
compatible = "fsl,mpc8568-pmc", |
| 197 |
"fsl,mpc8548-pmc"; |
| 198 |
reg = <0x70 0x20>; |
| 199 |
}; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
&qe { |
| 204 |
#address-cells = <1>; |
| 205 |
#size-cells = <1>; |
| 206 |
device_type = "qe"; |
| 207 |
compatible = "fsl,qe"; |
| 208 |
sleep = <&pmc 0x00000800>; |
| 209 |
brg-frequency = <0>; |
| 210 |
bus-frequency = <396000000>; |
| 211 |
fsl,qe-num-riscs = <2>; |
| 212 |
fsl,qe-num-snums = <28>; |
| 213 |
|
| 214 |
qeic: interrupt-controller@80 { |
| 215 |
interrupt-controller; |
| 216 |
compatible = "fsl,qe-ic"; |
| 217 |
#address-cells = <0>; |
| 218 |
#interrupt-cells = <1>; |
| 219 |
reg = <0x80 0x80>; |
| 220 |
interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 |
| 221 |
interrupt-parent = <&mpic>; |
| 222 |
}; |
| 223 |
|
| 224 |
spi@4c0 { |
| 225 |
#address-cells = <1>; |
| 226 |
#size-cells = <0>; |
| 227 |
compatible = "fsl,spi"; |
| 228 |
reg = <0x4c0 0x40>; |
| 229 |
cell-index = <0>; |
| 230 |
interrupts = <2>; |
| 231 |
interrupt-parent = <&qeic>; |
| 232 |
}; |
| 233 |
|
| 234 |
spi@500 { |
| 235 |
#address-cells = <1>; |
| 236 |
#size-cells = <0>; |
| 237 |
cell-index = <1>; |
| 238 |
compatible = "fsl,spi"; |
| 239 |
reg = <0x500 0x40>; |
| 240 |
interrupts = <1>; |
| 241 |
interrupt-parent = <&qeic>; |
| 242 |
}; |
| 243 |
|
| 244 |
ucc@2000 { |
| 245 |
cell-index = <1>; |
| 246 |
reg = <0x2000 0x200>; |
| 247 |
interrupts = <32>; |
| 248 |
interrupt-parent = <&qeic>; |
| 249 |
}; |
| 250 |
|
| 251 |
ucc@3000 { |
| 252 |
cell-index = <2>; |
| 253 |
reg = <0x3000 0x200>; |
| 254 |
interrupts = <33>; |
| 255 |
interrupt-parent = <&qeic>; |
| 256 |
}; |
| 257 |
|
| 258 |
muram@10000 { |
| 259 |
#address-cells = <1>; |
| 260 |
#size-cells = <1>; |
| 261 |
compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| 262 |
ranges = <0x0 0x10000 0x10000>; |
| 263 |
|
| 264 |
data-only@0 { |
| 265 |
compatible = "fsl,qe-muram-data", |
| 266 |
"fsl,cpm-muram-data"; |
| 267 |
reg = <0x0 0x10000>; |
| 268 |
}; |
| 269 |
}; |
| 270 |
}; |