| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* MPC8568E MDS Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2007, 2008 Freescale Semiconductor Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
/include/ "mpc8568si-pre.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "MPC8568EMDS"; |
| 12 |
compatible = "MPC8568EMDS", "MPC85xxMDS"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
pci0 = &pci0; |
| 16 |
pci1 = &pci1; |
| 17 |
rapidio0 = &rio; |
| 18 |
}; |
| 19 |
|
| 20 |
memory { |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0x0 0x0 0x0 0x0>; |
| 23 |
}; |
| 24 |
|
| 25 |
lbc: localbus@e0005000 { |
| 26 |
reg = <0x0 0xe0005000 0x0 0x1000>; |
| 27 |
ranges = <0x0 0x0 0xfe000000 0x02000000 |
| 28 |
0x1 0x0 0xf8000000 0x00008000 |
| 29 |
0x2 0x0 0xf0000000 0x04000000 |
| 30 |
0x4 0x0 0xf8008000 0x00008000 |
| 31 |
0x5 0x0 0xf8010000 0x00008000>; |
| 32 |
|
| 33 |
nor@0,0 { |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <1>; |
| 36 |
compatible = "cfi-flash"; |
| 37 |
reg = <0x0 0x0 0x02000000>; |
| 38 |
bank-width = <2>; |
| 39 |
device-width = <2>; |
| 40 |
}; |
| 41 |
|
| 42 |
bcsr@1,0 { |
| 43 |
#address-cells = <1>; |
| 44 |
#size-cells = <1>; |
| 45 |
compatible = "fsl,mpc8568mds-bcsr"; |
| 46 |
reg = <1 0 0x8000>; |
| 47 |
ranges = <0 1 0 0x8000>; |
| 48 |
|
| 49 |
bcsr5: gpio-controller@11 { |
| 50 |
#gpio-cells = <2>; |
| 51 |
compatible = "fsl,mpc8568mds-bcsr-gpio"; |
| 52 |
reg = <0x5 0x1>; |
| 53 |
gpio-controller; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
pib@4,0 { |
| 58 |
compatible = "fsl,mpc8568mds-pib"; |
| 59 |
reg = <4 0 0x8000>; |
| 60 |
}; |
| 61 |
|
| 62 |
pib@5,0 { |
| 63 |
compatible = "fsl,mpc8568mds-pib"; |
| 64 |
reg = <5 0 0x8000>; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
soc: soc8568@e0000000 { |
| 69 |
ranges = <0x0 0x0 0xe0000000 0x100000>; |
| 70 |
|
| 71 |
i2c-sleep-nexus { |
| 72 |
i2c@3000 { |
| 73 |
rtc@68 { |
| 74 |
compatible = "dallas,ds1374"; |
| 75 |
reg = <0x68>; |
| 76 |
interrupts = <3 1 0 0>; |
| 77 |
}; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
enet0: ethernet@24000 { |
| 82 |
tbi-handle = <&tbi0>; |
| 83 |
phy-handle = <&phy2>; |
| 84 |
}; |
| 85 |
|
| 86 |
mdio@24520 { |
| 87 |
phy0: ethernet-phy@7 { |
| 88 |
interrupts = <1 1 0 0>; |
| 89 |
reg = <0x7>; |
| 90 |
}; |
| 91 |
phy1: ethernet-phy@1 { |
| 92 |
interrupts = <2 1 0 0>; |
| 93 |
reg = <0x1>; |
| 94 |
}; |
| 95 |
phy2: ethernet-phy@2 { |
| 96 |
interrupts = <1 1 0 0>; |
| 97 |
reg = <0x2>; |
| 98 |
}; |
| 99 |
phy3: ethernet-phy@3 { |
| 100 |
interrupts = <2 1 0 0>; |
| 101 |
reg = <0x3>; |
| 102 |
}; |
| 103 |
tbi0: tbi-phy@11 { |
| 104 |
reg = <0x11>; |
| 105 |
device_type = "tbi-phy"; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
enet1: ethernet@25000 { |
| 110 |
tbi-handle = <&tbi1>; |
| 111 |
phy-handle = <&phy3>; |
| 112 |
sleep = <&pmc 0x00000040>; |
| 113 |
}; |
| 114 |
|
| 115 |
mdio@25520 { |
| 116 |
tbi1: tbi-phy@11 { |
| 117 |
reg = <0x11>; |
| 118 |
device_type = "tbi-phy"; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
par_io@e0100 { |
| 123 |
num-ports = <7>; |
| 124 |
|
| 125 |
pio1: ucc_pin@1 { |
| 126 |
pio-map = < |
| 127 |
/* port pin dir open_drain assignment has_irq */ |
| 128 |
0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ |
| 129 |
0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ |
| 130 |
0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ |
| 131 |
0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ |
| 132 |
0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ |
| 133 |
0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ |
| 134 |
0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ |
| 135 |
0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ |
| 136 |
0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ |
| 137 |
0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ |
| 138 |
0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ |
| 139 |
0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ |
| 140 |
0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ |
| 141 |
0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ |
| 142 |
0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ |
| 143 |
0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ |
| 144 |
0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ |
| 145 |
0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ |
| 146 |
0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ |
| 147 |
0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ |
| 148 |
0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ |
| 149 |
0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ |
| 150 |
0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ |
| 151 |
}; |
| 152 |
|
| 153 |
pio2: ucc_pin@2 { |
| 154 |
pio-map = < |
| 155 |
/* port pin dir open_drain assignment has_irq */ |
| 156 |
0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ |
| 157 |
0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ |
| 158 |
0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ |
| 159 |
0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ |
| 160 |
0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ |
| 161 |
0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ |
| 162 |
0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ |
| 163 |
0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ |
| 164 |
0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ |
| 165 |
0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ |
| 166 |
0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ |
| 167 |
0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ |
| 168 |
0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ |
| 169 |
0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ |
| 170 |
0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ |
| 171 |
0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ |
| 172 |
0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ |
| 173 |
0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ |
| 174 |
0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ |
| 175 |
0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ |
| 176 |
0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ |
| 177 |
0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ |
| 178 |
0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ |
| 179 |
0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ |
| 180 |
0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ |
| 181 |
}; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
qe: qe@e0080000 { |
| 186 |
ranges = <0x0 0x0 0xe0080000 0x40000>; |
| 187 |
reg = <0x0 0xe0080000 0x0 0x480>; |
| 188 |
|
| 189 |
spi@4c0 { |
| 190 |
mode = "cpu"; |
| 191 |
}; |
| 192 |
|
| 193 |
spi@500 { |
| 194 |
mode = "cpu"; |
| 195 |
}; |
| 196 |
|
| 197 |
enet2: ucc@2000 { |
| 198 |
device_type = "network"; |
| 199 |
compatible = "ucc_geth"; |
| 200 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 201 |
rx-clock-name = "none"; |
| 202 |
tx-clock-name = "clk16"; |
| 203 |
pio-handle = <&pio1>; |
| 204 |
phy-handle = <&phy0>; |
| 205 |
phy-connection-type = "rgmii-id"; |
| 206 |
}; |
| 207 |
|
| 208 |
enet3: ucc@3000 { |
| 209 |
device_type = "network"; |
| 210 |
compatible = "ucc_geth"; |
| 211 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 212 |
rx-clock-name = "none"; |
| 213 |
tx-clock-name = "clk16"; |
| 214 |
pio-handle = <&pio2>; |
| 215 |
phy-handle = <&phy1>; |
| 216 |
phy-connection-type = "rgmii-id"; |
| 217 |
}; |
| 218 |
|
| 219 |
mdio@2120 { |
| 220 |
#address-cells = <1>; |
| 221 |
#size-cells = <0>; |
| 222 |
reg = <0x2120 0x18>; |
| 223 |
compatible = "fsl,ucc-mdio"; |
| 224 |
|
| 225 |
/* These are the same PHYs as on |
| 226 |
* gianfar's MDIO bus */ |
| 227 |
qe_phy0: ethernet-phy@7 { |
| 228 |
interrupt-parent = <&mpic>; |
| 229 |
interrupts = <1 1 0 0>; |
| 230 |
reg = <0x7>; |
| 231 |
}; |
| 232 |
qe_phy1: ethernet-phy@1 { |
| 233 |
interrupt-parent = <&mpic>; |
| 234 |
interrupts = <2 1 0 0>; |
| 235 |
reg = <0x1>; |
| 236 |
}; |
| 237 |
qe_phy2: ethernet-phy@2 { |
| 238 |
interrupt-parent = <&mpic>; |
| 239 |
interrupts = <1 1 0 0>; |
| 240 |
reg = <0x2>; |
| 241 |
}; |
| 242 |
qe_phy3: ethernet-phy@3 { |
| 243 |
interrupt-parent = <&mpic>; |
| 244 |
interrupts = <2 1 0 0>; |
| 245 |
reg = <0x3>; |
| 246 |
}; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
pci0: pci@e0008000 { |
| 251 |
reg = <0x0 0xe0008000 0x0 0x1000>; |
| 252 |
ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 |
| 253 |
0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; |
| 254 |
clock-frequency = <66666666>; |
| 255 |
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 256 |
interrupt-map = < |
| 257 |
/* IDSEL 0x12 AD18 */ |
| 258 |
0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 |
| 259 |
0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 |
| 260 |
0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 |
| 261 |
0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 |
| 262 |
|
| 263 |
/* IDSEL 0x13 AD19 */ |
| 264 |
0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 |
| 265 |
0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 |
| 266 |
0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 |
| 267 |
0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; |
| 268 |
}; |
| 269 |
|
| 270 |
/* PCI Express */ |
| 271 |
pci1: pcie@e000a000 { |
| 272 |
ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 |
| 273 |
0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; |
| 274 |
reg = <0x0 0xe000a000 0x0 0x1000>; |
| 275 |
pcie@0 { |
| 276 |
ranges = <0x2000000 0x0 0xa0000000 |
| 277 |
0x2000000 0x0 0xa0000000 |
| 278 |
0x0 0x10000000 |
| 279 |
|
| 280 |
0x1000000 0x0 0x0 |
| 281 |
0x1000000 0x0 0x0 |
| 282 |
0x0 0x800000>; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
rio: rapidio@e00c00000 { |
| 287 |
reg = <0x0 0xe00c0000 0x0 0x20000>; |
| 288 |
port1 { |
| 289 |
ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
leds { |
| 294 |
compatible = "gpio-leds"; |
| 295 |
|
| 296 |
green { |
| 297 |
gpios = <&bcsr5 1 0>; |
| 298 |
}; |
| 299 |
|
| 300 |
amber { |
| 301 |
gpios = <&bcsr5 2 0>; |
| 302 |
}; |
| 303 |
|
| 304 |
red { |
| 305 |
gpios = <&bcsr5 3 0>; |
| 306 |
}; |
| 307 |
}; |
| 308 |
}; |
| 309 |
|
| 310 |
/include/ "mpc8568si-post.dtsi" |