| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Device Tree for the Embedded Planet EP8248E board running PlanetCore. |
| 4 |
* |
| 5 |
* Copyright 2007 Freescale Semiconductor Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
/ { |
| 10 |
model = "EP8248E"; |
| 11 |
compatible = "fsl,ep8248e"; |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
|
| 15 |
aliases { |
| 16 |
planetcore-SMC1 = &smc1; |
| 17 |
planetcore-SCC1 = &scc1; |
| 18 |
ethernet0 = ð0; |
| 19 |
ethernet1 = ð1; |
| 20 |
serial0 = &smc1; |
| 21 |
serial1 = &scc1; |
| 22 |
}; |
| 23 |
|
| 24 |
cpus { |
| 25 |
#address-cells = <1>; |
| 26 |
#size-cells = <0>; |
| 27 |
|
| 28 |
PowerPC,8248@0 { |
| 29 |
device_type = "cpu"; |
| 30 |
reg = <0>; |
| 31 |
d-cache-line-size = <32>; |
| 32 |
i-cache-line-size = <32>; |
| 33 |
d-cache-size = <16384>; |
| 34 |
i-cache-size = <16384>; |
| 35 |
timebase-frequency = <0>; |
| 36 |
clock-frequency = <0>; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
localbus@f0010100 { |
| 41 |
compatible = "fsl,mpc8248-localbus", |
| 42 |
"fsl,pq2-localbus", |
| 43 |
"simple-bus"; |
| 44 |
#address-cells = <2>; |
| 45 |
#size-cells = <1>; |
| 46 |
reg = <0xf0010100 0x40>; |
| 47 |
|
| 48 |
ranges = <0 0 0xfc000000 0x04000000 |
| 49 |
1 0 0xfa000000 0x00008000>; |
| 50 |
|
| 51 |
flash@0,3800000 { |
| 52 |
compatible = "cfi-flash"; |
| 53 |
reg = <0 0x3800000 0x800000>; |
| 54 |
bank-width = <4>; |
| 55 |
device-width = <2>; |
| 56 |
}; |
| 57 |
|
| 58 |
bcsr@1,0 { |
| 59 |
#address-cells = <2>; |
| 60 |
#size-cells = <1>; |
| 61 |
reg = <1 0 0x10>; |
| 62 |
compatible = "fsl,ep8248e-bcsr"; |
| 63 |
ranges; |
| 64 |
|
| 65 |
mdio { |
| 66 |
compatible = "fsl,ep8248e-mdio-bitbang"; |
| 67 |
#address-cells = <1>; |
| 68 |
#size-cells = <0>; |
| 69 |
reg = <1 8 1>; |
| 70 |
|
| 71 |
PHY0: ethernet-phy@0 { |
| 72 |
interrupt-parent = <&PIC>; |
| 73 |
reg = <0>; |
| 74 |
}; |
| 75 |
|
| 76 |
PHY1: ethernet-phy@1 { |
| 77 |
interrupt-parent = <&PIC>; |
| 78 |
reg = <1>; |
| 79 |
}; |
| 80 |
}; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
memory { |
| 85 |
device_type = "memory"; |
| 86 |
reg = <0 0>; |
| 87 |
}; |
| 88 |
|
| 89 |
soc@f0000000 { |
| 90 |
#address-cells = <1>; |
| 91 |
#size-cells = <1>; |
| 92 |
compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; |
| 93 |
ranges = <0x00000000 0xf0000000 0x00053000>; |
| 94 |
|
| 95 |
// Temporary until code stops depending on it. |
| 96 |
device_type = "soc"; |
| 97 |
|
| 98 |
// Temporary -- will go away once kernel uses ranges for get_immrbase(). |
| 99 |
reg = <0xf0000000 0x00053000>; |
| 100 |
|
| 101 |
cpm@119c0 { |
| 102 |
#address-cells = <1>; |
| 103 |
#size-cells = <1>; |
| 104 |
#interrupt-cells = <2>; |
| 105 |
compatible = "fsl,mpc8248-cpm", "fsl,cpm2", |
| 106 |
"simple-bus"; |
| 107 |
reg = <0x119c0 0x30>; |
| 108 |
ranges; |
| 109 |
|
| 110 |
muram { |
| 111 |
#address-cells = <1>; |
| 112 |
#size-cells = <1>; |
| 113 |
ranges = <0 0 0x10000>; |
| 114 |
|
| 115 |
data@0 { |
| 116 |
compatible = "fsl,cpm-muram-data"; |
| 117 |
reg = <0 0x2000 0x9800 0x800>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
brg@119f0 { |
| 122 |
compatible = "fsl,mpc8248-brg", |
| 123 |
"fsl,cpm2-brg", |
| 124 |
"fsl,cpm-brg"; |
| 125 |
reg = <0x119f0 0x10 0x115f0 0x10>; |
| 126 |
}; |
| 127 |
|
| 128 |
/* Monitor port/SMC1 */ |
| 129 |
smc1: serial@11a80 { |
| 130 |
device_type = "serial"; |
| 131 |
compatible = "fsl,mpc8248-smc-uart", |
| 132 |
"fsl,cpm2-smc-uart"; |
| 133 |
reg = <0x11a80 0x20 0x87fc 2>; |
| 134 |
interrupts = <4 8>; |
| 135 |
interrupt-parent = <&PIC>; |
| 136 |
fsl,cpm-brg = <7>; |
| 137 |
fsl,cpm-command = <0x1d000000>; |
| 138 |
linux,planetcore-label = "SMC1"; |
| 139 |
}; |
| 140 |
|
| 141 |
/* "Serial" port/SCC1 */ |
| 142 |
scc1: serial@11a00 { |
| 143 |
device_type = "serial"; |
| 144 |
compatible = "fsl,mpc8248-scc-uart", |
| 145 |
"fsl,cpm2-scc-uart"; |
| 146 |
reg = <0x11a00 0x20 0x8000 0x100>; |
| 147 |
interrupts = <40 8>; |
| 148 |
interrupt-parent = <&PIC>; |
| 149 |
fsl,cpm-brg = <1>; |
| 150 |
fsl,cpm-command = <0x00800000>; |
| 151 |
linux,planetcore-label = "SCC1"; |
| 152 |
}; |
| 153 |
|
| 154 |
eth0: ethernet@11300 { |
| 155 |
device_type = "network"; |
| 156 |
compatible = "fsl,mpc8248-fcc-enet", |
| 157 |
"fsl,cpm2-fcc-enet"; |
| 158 |
reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; |
| 159 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 160 |
interrupts = <32 8>; |
| 161 |
interrupt-parent = <&PIC>; |
| 162 |
phy-handle = <&PHY0>; |
| 163 |
linux,network-index = <0>; |
| 164 |
fsl,cpm-command = <0x12000300>; |
| 165 |
}; |
| 166 |
|
| 167 |
eth1: ethernet@11320 { |
| 168 |
device_type = "network"; |
| 169 |
compatible = "fsl,mpc8248-fcc-enet", |
| 170 |
"fsl,cpm2-fcc-enet"; |
| 171 |
reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; |
| 172 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 173 |
interrupts = <33 8>; |
| 174 |
interrupt-parent = <&PIC>; |
| 175 |
phy-handle = <&PHY1>; |
| 176 |
linux,network-index = <1>; |
| 177 |
fsl,cpm-command = <0x16200300>; |
| 178 |
}; |
| 179 |
|
| 180 |
usb@11b60 { |
| 181 |
#address-cells = <1>; |
| 182 |
#size-cells = <0>; |
| 183 |
compatible = "fsl,mpc8248-usb", |
| 184 |
"fsl,cpm2-usb"; |
| 185 |
reg = <0x11b60 0x18 0x8b00 0x100>; |
| 186 |
interrupt-parent = <&PIC>; |
| 187 |
interrupts = <11 8>; |
| 188 |
fsl,cpm-command = <0x2e600000>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
PIC: interrupt-controller@10c00 { |
| 193 |
#interrupt-cells = <2>; |
| 194 |
interrupt-controller; |
| 195 |
reg = <0x10c00 0x80>; |
| 196 |
compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; |
| 197 |
}; |
| 198 |
}; |
| 199 |
}; |