| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* charon board Device Tree Source |
| 4 |
* |
| 5 |
* Copyright (C) 2007 Semihalf |
| 6 |
* Marian Balakowicz <[email protected]> |
| 7 |
* |
| 8 |
* Copyright (C) 2010 DENX Software Engineering GmbH |
| 9 |
* Heiko Schocher <[email protected]> |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "anon,charon"; |
| 16 |
compatible = "anon,charon"; |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <1>; |
| 19 |
interrupt-parent = <&mpc5200_pic>; |
| 20 |
|
| 21 |
cpus { |
| 22 |
#address-cells = <1>; |
| 23 |
#size-cells = <0>; |
| 24 |
|
| 25 |
PowerPC,5200@0 { |
| 26 |
device_type = "cpu"; |
| 27 |
reg = <0>; |
| 28 |
d-cache-line-size = <32>; |
| 29 |
i-cache-line-size = <32>; |
| 30 |
d-cache-size = <0x4000>; // L1, 16K |
| 31 |
i-cache-size = <0x4000>; // L1, 16K |
| 32 |
timebase-frequency = <0>; // from bootloader |
| 33 |
bus-frequency = <0>; // from bootloader |
| 34 |
clock-frequency = <0>; // from bootloader |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
memory@0 { |
| 39 |
device_type = "memory"; |
| 40 |
reg = <0x00000000 0x08000000>; // 128MB |
| 41 |
}; |
| 42 |
|
| 43 |
soc5200@f0000000 { |
| 44 |
#address-cells = <1>; |
| 45 |
#size-cells = <1>; |
| 46 |
compatible = "fsl,mpc5200-immr"; |
| 47 |
ranges = <0 0xf0000000 0x0000c000>; |
| 48 |
reg = <0xf0000000 0x00000100>; |
| 49 |
bus-frequency = <0>; // from bootloader |
| 50 |
system-frequency = <0>; // from bootloader |
| 51 |
|
| 52 |
cdm@200 { |
| 53 |
compatible = "fsl,mpc5200-cdm"; |
| 54 |
reg = <0x200 0x38>; |
| 55 |
}; |
| 56 |
|
| 57 |
mpc5200_pic: interrupt-controller@500 { |
| 58 |
// 5200 interrupts are encoded into two levels; |
| 59 |
interrupt-controller; |
| 60 |
#interrupt-cells = <3>; |
| 61 |
compatible = "fsl,mpc5200-pic"; |
| 62 |
reg = <0x500 0x80>; |
| 63 |
}; |
| 64 |
|
| 65 |
timer@600 { // General Purpose Timer |
| 66 |
compatible = "fsl,mpc5200-gpt"; |
| 67 |
reg = <0x600 0x10>; |
| 68 |
interrupts = <1 9 0>; |
| 69 |
fsl,has-wdt; |
| 70 |
}; |
| 71 |
|
| 72 |
can@900 { |
| 73 |
compatible = "fsl,mpc5200-mscan"; |
| 74 |
interrupts = <2 17 0>; |
| 75 |
reg = <0x900 0x80>; |
| 76 |
}; |
| 77 |
|
| 78 |
can@980 { |
| 79 |
compatible = "fsl,mpc5200-mscan"; |
| 80 |
interrupts = <2 18 0>; |
| 81 |
reg = <0x980 0x80>; |
| 82 |
}; |
| 83 |
|
| 84 |
gpio_simple: gpio@b00 { |
| 85 |
compatible = "fsl,mpc5200-gpio"; |
| 86 |
reg = <0xb00 0x40>; |
| 87 |
interrupts = <1 7 0>; |
| 88 |
gpio-controller; |
| 89 |
#gpio-cells = <2>; |
| 90 |
}; |
| 91 |
|
| 92 |
usb@1000 { |
| 93 |
compatible = "fsl,mpc5200-ohci","ohci-be"; |
| 94 |
reg = <0x1000 0xff>; |
| 95 |
interrupts = <2 6 0>; |
| 96 |
}; |
| 97 |
|
| 98 |
dma-controller@1200 { |
| 99 |
device_type = "dma-controller"; |
| 100 |
compatible = "fsl,mpc5200-bestcomm"; |
| 101 |
reg = <0x1200 0x80>; |
| 102 |
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 |
| 103 |
3 4 0 3 5 0 3 6 0 3 7 0 |
| 104 |
3 8 0 3 9 0 3 10 0 3 11 0 |
| 105 |
3 12 0 3 13 0 3 14 0 3 15 0>; |
| 106 |
}; |
| 107 |
|
| 108 |
xlb@1f00 { |
| 109 |
compatible = "fsl,mpc5200-xlb"; |
| 110 |
reg = <0x1f00 0x100>; |
| 111 |
}; |
| 112 |
|
| 113 |
serial@2000 { // PSC1 |
| 114 |
compatible = "fsl,mpc5200-psc-uart"; |
| 115 |
reg = <0x2000 0x100>; |
| 116 |
interrupts = <2 1 0>; |
| 117 |
}; |
| 118 |
|
| 119 |
serial@2400 { // PSC3 |
| 120 |
compatible = "fsl,mpc5200-psc-uart"; |
| 121 |
reg = <0x2400 0x100>; |
| 122 |
interrupts = <2 3 0>; |
| 123 |
}; |
| 124 |
|
| 125 |
ethernet@3000 { |
| 126 |
compatible = "fsl,mpc5200-fec"; |
| 127 |
reg = <0x3000 0x400>; |
| 128 |
local-mac-address = [ 00 00 00 00 00 00 ]; |
| 129 |
interrupts = <2 5 0>; |
| 130 |
fixed-link = <1 1 100 0 0>; |
| 131 |
}; |
| 132 |
|
| 133 |
mdio@3000 { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <0>; |
| 136 |
compatible = "fsl,mpc5200-mdio"; |
| 137 |
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts |
| 138 |
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. |
| 139 |
}; |
| 140 |
|
| 141 |
ata@3a00 { |
| 142 |
compatible = "fsl,mpc5200-ata"; |
| 143 |
reg = <0x3a00 0x100>; |
| 144 |
interrupts = <2 7 0>; |
| 145 |
}; |
| 146 |
|
| 147 |
i2c@3d00 { |
| 148 |
#address-cells = <1>; |
| 149 |
#size-cells = <0>; |
| 150 |
compatible = "fsl,mpc5200-i2c","fsl-i2c"; |
| 151 |
reg = <0x3d00 0x40>; |
| 152 |
interrupts = <2 15 0>; |
| 153 |
}; |
| 154 |
|
| 155 |
|
| 156 |
i2c@3d40 { |
| 157 |
#address-cells = <1>; |
| 158 |
#size-cells = <0>; |
| 159 |
compatible = "fsl,mpc5200-i2c","fsl-i2c"; |
| 160 |
reg = <0x3d40 0x40>; |
| 161 |
interrupts = <2 16 0>; |
| 162 |
|
| 163 |
dtt@28 { |
| 164 |
compatible = "national,lm80"; |
| 165 |
reg = <0x28>; |
| 166 |
}; |
| 167 |
|
| 168 |
rtc@68 { |
| 169 |
compatible = "dallas,ds1374"; |
| 170 |
reg = <0x68>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
sram@8000 { |
| 175 |
compatible = "fsl,mpc5200-sram"; |
| 176 |
reg = <0x8000 0x4000>; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
localbus { |
| 181 |
compatible = "fsl,mpc5200-lpb","simple-bus"; |
| 182 |
#address-cells = <2>; |
| 183 |
#size-cells = <1>; |
| 184 |
ranges = < 0 0 0xfc000000 0x02000000 |
| 185 |
1 0 0xe0000000 0x04000000 // CS1 range, SM501 |
| 186 |
3 0 0xe8000000 0x00080000>; |
| 187 |
|
| 188 |
flash@0,0 { |
| 189 |
compatible = "cfi-flash"; |
| 190 |
reg = <0 0 0x02000000>; |
| 191 |
bank-width = <4>; |
| 192 |
device-width = <2>; |
| 193 |
#size-cells = <1>; |
| 194 |
#address-cells = <1>; |
| 195 |
}; |
| 196 |
|
| 197 |
display@1,0 { |
| 198 |
compatible = "smi,sm501"; |
| 199 |
reg = <1 0x00000000 0x00800000 |
| 200 |
1 0x03e00000 0x00200000>; |
| 201 |
mode = "640x480-32@60"; |
| 202 |
interrupts = <1 1 3>; |
| 203 |
little-endian; |
| 204 |
}; |
| 205 |
|
| 206 |
mram0@3,0 { |
| 207 |
compatible = "mtd-ram"; |
| 208 |
reg = <3 0x00000 0x80000>; |
| 209 |
bank-width = <1>; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
pci@f0000d00 { |
| 214 |
#interrupt-cells = <1>; |
| 215 |
#size-cells = <2>; |
| 216 |
#address-cells = <3>; |
| 217 |
device_type = "pci"; |
| 218 |
compatible = "fsl,mpc5200-pci"; |
| 219 |
reg = <0xf0000d00 0x100>; |
| 220 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 221 |
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 |
| 222 |
0xc000 0 0 2 &mpc5200_pic 0 0 3 |
| 223 |
0xc000 0 0 3 &mpc5200_pic 0 0 3 |
| 224 |
0xc000 0 0 4 &mpc5200_pic 0 0 3>; |
| 225 |
clock-frequency = <0>; // From boot loader |
| 226 |
interrupts = <2 8 0 2 9 0 2 10 0>; |
| 227 |
bus-range = <0 0>; |
| 228 |
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, |
| 229 |
<0x02000000 0 0x90000000 0x90000000 0 0x10000000>, |
| 230 |
<0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; |
| 231 |
}; |
| 232 |
}; |