| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* AmigaOne Device Tree Source |
| 4 |
* |
| 5 |
* Copyright 2008 Gerhard Pircher ([email protected]) |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "AmigaOne"; |
| 12 |
compatible = "eyetech,amigaone"; |
| 13 |
coherency-off; |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <1>; |
| 16 |
|
| 17 |
cpus { |
| 18 |
#cpus = <1>; |
| 19 |
#address-cells = <1>; |
| 20 |
#size-cells = <0>; |
| 21 |
|
| 22 |
cpu@0 { |
| 23 |
device_type = "cpu"; |
| 24 |
reg = <0>; |
| 25 |
d-cache-line-size = <32>; // 32 bytes |
| 26 |
i-cache-line-size = <32>; // 32 bytes |
| 27 |
d-cache-size = <32768>; // L1, 32K |
| 28 |
i-cache-size = <32768>; // L1, 32K |
| 29 |
timebase-frequency = <0>; // 33.3 MHz, from U-boot |
| 30 |
clock-frequency = <0>; // From U-boot |
| 31 |
bus-frequency = <0>; // From U-boot |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
memory { |
| 36 |
device_type = "memory"; |
| 37 |
reg = <0 0>; // From U-boot |
| 38 |
}; |
| 39 |
|
| 40 |
pci@80000000 { |
| 41 |
device_type = "pci"; |
| 42 |
compatible = "mai-logic,articia-s"; |
| 43 |
bus-frequency = <33333333>; |
| 44 |
bus-range = <0 0xff>; |
| 45 |
ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O |
| 46 |
0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory |
| 47 |
0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA) |
| 48 |
// Configuration address and data register. |
| 49 |
reg = <0xfec00cf8 4 |
| 50 |
0xfee00cfc 4>; |
| 51 |
8259-interrupt-acknowledge = <0xfef00000>; |
| 52 |
// Do not define a interrupt-parent here, if there is no |
| 53 |
// interrupt-map property. |
| 54 |
#address-cells = <3>; |
| 55 |
#size-cells = <2>; |
| 56 |
|
| 57 |
isa@7 { |
| 58 |
device_type = "isa"; |
| 59 |
compatible = "pciclass,0601"; |
| 60 |
vendor-id = <0x00001106>; |
| 61 |
device-id = <0x00000686>; |
| 62 |
revision-id = <0x00000010>; |
| 63 |
class-code = <0x00060100>; |
| 64 |
subsystem-id = <0>; |
| 65 |
subsystem-vendor-id = <0>; |
| 66 |
devsel-speed = <0x00000001>; |
| 67 |
min-grant = <0>; |
| 68 |
max-latency = <0>; |
| 69 |
/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ |
| 70 |
ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; |
| 71 |
interrupt-parent = <&i8259>; |
| 72 |
#interrupt-cells = <2>; |
| 73 |
#address-cells = <2>; |
| 74 |
#size-cells = <1>; |
| 75 |
|
| 76 |
dma-controller@0 { |
| 77 |
compatible = "pnpPNP,200"; |
| 78 |
reg = <1 0x00000000 0x00000020 |
| 79 |
1 0x00000080 0x00000010 |
| 80 |
1 0x000000c0 0x00000020>; |
| 81 |
}; |
| 82 |
|
| 83 |
i8259: interrupt-controller@20 { |
| 84 |
device_type = "interrupt-controller"; |
| 85 |
compatible = "pnpPNP,000"; |
| 86 |
interrupt-controller; |
| 87 |
reg = <1 0x00000020 0x00000002 |
| 88 |
1 0x000000a0 0x00000002 |
| 89 |
1 0x000004d0 0x00000002>; |
| 90 |
reserved-interrupts = <2>; |
| 91 |
#interrupt-cells = <2>; |
| 92 |
}; |
| 93 |
|
| 94 |
timer@40 { |
| 95 |
// Also adds pcspkr to platform devices. |
| 96 |
compatible = "pnpPNP,100"; |
| 97 |
reg = <1 0x00000040 0x00000020>; |
| 98 |
}; |
| 99 |
|
| 100 |
8042@60 { |
| 101 |
device_type = "8042"; |
| 102 |
reg = <1 0x00000060 0x00000001 |
| 103 |
1 0x00000064 0x00000001>; |
| 104 |
interrupts = <1 3 12 3>; |
| 105 |
#address-cells = <1>; |
| 106 |
#size-cells = <0>; |
| 107 |
|
| 108 |
keyboard@0 { |
| 109 |
compatible = "pnpPNP,303"; |
| 110 |
reg = <0>; |
| 111 |
}; |
| 112 |
|
| 113 |
mouse@1 { |
| 114 |
compatible = "pnpPNP,f03"; |
| 115 |
reg = <1>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
rtc@70 { |
| 120 |
compatible = "pnpPNP,b00"; |
| 121 |
reg = <1 0x00000070 0x00000002>; |
| 122 |
interrupts = <8 3>; |
| 123 |
}; |
| 124 |
|
| 125 |
serial@3f8 { |
| 126 |
device_type = "serial"; |
| 127 |
compatible = "pnpPNP,501","pnpPNP,500"; |
| 128 |
reg = <1 0x000003f8 0x00000008>; |
| 129 |
interrupts = <4 3>; |
| 130 |
clock-frequency = <1843200>; |
| 131 |
current-speed = <115200>; |
| 132 |
}; |
| 133 |
|
| 134 |
serial@2f8 { |
| 135 |
device_type = "serial"; |
| 136 |
compatible = "pnpPNP,501","pnpPNP,500"; |
| 137 |
reg = <1 0x000002f8 0x00000008>; |
| 138 |
interrupts = <3 3>; |
| 139 |
clock-frequency = <1843200>; |
| 140 |
current-speed = <115200>; |
| 141 |
}; |
| 142 |
|
| 143 |
parallel@378 { |
| 144 |
device_type = "parallel"; |
| 145 |
// No ECP support for now, otherwise add "pnpPNP,401". |
| 146 |
compatible = "pnpPNP,400"; |
| 147 |
reg = <1 0x00000378 0x00000003 |
| 148 |
1 0x00000778 0x00000003>; |
| 149 |
}; |
| 150 |
|
| 151 |
fdc@3f0 { |
| 152 |
device_type = "fdc"; |
| 153 |
compatible = "pnpPNP,700"; |
| 154 |
reg = <1 0x000003f0 0x00000008>; |
| 155 |
interrupts = <6 3>; |
| 156 |
#address-cells = <1>; |
| 157 |
#size-cells = <0>; |
| 158 |
|
| 159 |
disk@0 { |
| 160 |
reg = <0>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
chosen { |
| 167 |
stdout-path = "/pci@80000000/isa@7/serial@3f8"; |
| 168 |
}; |
| 169 |
}; |