| 1 |
/* |
| 2 |
* Device Tree Source for IBM Embedded PPC 476 Platform |
| 3 |
* |
| 4 |
* Copyright © 2013 Tony Breeds IBM Corporation |
| 5 |
* Copyright © 2013 Alistair Popple IBM Corporation |
| 6 |
* |
| 7 |
* This file is licensed under the terms of the GNU General Public |
| 8 |
* License version 2. This program is licensed "as is" without |
| 9 |
* any warranty of any kind, whether express or implied. |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
|
| 14 |
/memreserve/ 0x01f00000 0x00100000; // spin table |
| 15 |
|
| 16 |
/ { |
| 17 |
#address-cells = <2>; |
| 18 |
#size-cells = <2>; |
| 19 |
model = "ibm,akebono"; |
| 20 |
compatible = "ibm,akebono", "ibm,476gtr"; |
| 21 |
dcr-parent = <&{/cpus/cpu@0}>; |
| 22 |
|
| 23 |
aliases { |
| 24 |
serial0 = &UART0; |
| 25 |
}; |
| 26 |
|
| 27 |
cpus { |
| 28 |
#address-cells = <1>; |
| 29 |
#size-cells = <0>; |
| 30 |
|
| 31 |
cpu@0 { |
| 32 |
device_type = "cpu"; |
| 33 |
model = "PowerPC,476"; |
| 34 |
reg = <0>; |
| 35 |
clock-frequency = <1600000000>; // 1.6 GHz |
| 36 |
timebase-frequency = <100000000>; // 100Mhz |
| 37 |
i-cache-line-size = <32>; |
| 38 |
d-cache-line-size = <32>; |
| 39 |
i-cache-size = <32768>; |
| 40 |
d-cache-size = <32768>; |
| 41 |
dcr-controller; |
| 42 |
dcr-access-method = "native"; |
| 43 |
status = "okay"; |
| 44 |
}; |
| 45 |
cpu@1 { |
| 46 |
device_type = "cpu"; |
| 47 |
model = "PowerPC,476"; |
| 48 |
reg = <1>; |
| 49 |
clock-frequency = <1600000000>; // 1.6 GHz |
| 50 |
timebase-frequency = <100000000>; // 100Mhz |
| 51 |
i-cache-line-size = <32>; |
| 52 |
d-cache-line-size = <32>; |
| 53 |
i-cache-size = <32768>; |
| 54 |
d-cache-size = <32768>; |
| 55 |
dcr-controller; |
| 56 |
dcr-access-method = "native"; |
| 57 |
status = "disabled"; |
| 58 |
enable-method = "spin-table"; |
| 59 |
cpu-release-addr = <0x0 0x01f00000>; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
memory { |
| 64 |
device_type = "memory"; |
| 65 |
reg = <0x0 0x0 0x0 0x0>; // filled in by zImage |
| 66 |
}; |
| 67 |
|
| 68 |
MPIC: interrupt-controller { |
| 69 |
compatible = "chrp,open-pic"; |
| 70 |
interrupt-controller; |
| 71 |
dcr-reg = <0xffc00000 0x00040000>; |
| 72 |
#address-cells = <0>; |
| 73 |
#size-cells = <0>; |
| 74 |
#interrupt-cells = <2>; |
| 75 |
single-cpu-affinity; |
| 76 |
}; |
| 77 |
|
| 78 |
plb { |
| 79 |
compatible = "ibm,plb6"; |
| 80 |
#address-cells = <2>; |
| 81 |
#size-cells = <2>; |
| 82 |
ranges; |
| 83 |
clock-frequency = <200000000>; // 200Mhz |
| 84 |
|
| 85 |
HSTA0: hsta@310000e0000 { |
| 86 |
compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi"; |
| 87 |
reg = <0x310 0x000e0000 0x0 0xf0>; |
| 88 |
interrupt-parent = <&MPIC>; |
| 89 |
interrupts = <108 0 |
| 90 |
109 0 |
| 91 |
110 0 |
| 92 |
111 0 |
| 93 |
112 0 |
| 94 |
113 0 |
| 95 |
114 0 |
| 96 |
115 0 |
| 97 |
116 0 |
| 98 |
117 0 |
| 99 |
118 0 |
| 100 |
119 0 |
| 101 |
120 0 |
| 102 |
121 0 |
| 103 |
122 0 |
| 104 |
123 0>; |
| 105 |
}; |
| 106 |
|
| 107 |
MAL0: mcmal { |
| 108 |
compatible = "ibm,mcmal-476gtr", "ibm,mcmal2"; |
| 109 |
dcr-reg = <0xc0000000 0x062>; |
| 110 |
num-tx-chans = <1>; |
| 111 |
num-rx-chans = <1>; |
| 112 |
#address-cells = <0>; |
| 113 |
#size-cells = <0>; |
| 114 |
interrupt-parent = <&MPIC>; |
| 115 |
interrupts = < /*TXEOB*/ 77 0x4 |
| 116 |
/*RXEOB*/ 78 0x4 |
| 117 |
/*SERR*/ 76 0x4 |
| 118 |
/*TXDE*/ 79 0x4 |
| 119 |
/*RXDE*/ 80 0x4>; |
| 120 |
}; |
| 121 |
|
| 122 |
SATA0: sata@30000010000 { |
| 123 |
compatible = "ibm,476gtr-ahci"; |
| 124 |
reg = <0x300 0x00010000 0x0 0x10000>; |
| 125 |
interrupt-parent = <&MPIC>; |
| 126 |
interrupts = <93 2>; |
| 127 |
}; |
| 128 |
|
| 129 |
EHCI0: usb@30010000000 { |
| 130 |
compatible = "ibm,476gtr-ehci", "generic-ehci"; |
| 131 |
reg = <0x300 0x10000000 0x0 0x10000>; |
| 132 |
interrupt-parent = <&MPIC>; |
| 133 |
interrupts = <85 2>; |
| 134 |
}; |
| 135 |
|
| 136 |
SD0: sd@30000000000 { |
| 137 |
compatible = "ibm,476gtr-sdhci", "generic-sdhci"; |
| 138 |
reg = <0x300 0x00000000 0x0 0x10000>; |
| 139 |
interrupts = <91 2>; |
| 140 |
interrupt-parent = <&MPIC>; |
| 141 |
}; |
| 142 |
|
| 143 |
OHCI0: usb@30010010000 { |
| 144 |
compatible = "ibm,476gtr-ohci", "generic-ohci"; |
| 145 |
reg = <0x300 0x10010000 0x0 0x10000>; |
| 146 |
interrupt-parent = <&MPIC>; |
| 147 |
interrupts = <89 1>; |
| 148 |
}; |
| 149 |
|
| 150 |
OHCI1: usb@30010020000 { |
| 151 |
compatible = "ibm,476gtr-ohci", "generic-ohci"; |
| 152 |
reg = <0x300 0x10020000 0x0 0x10000>; |
| 153 |
interrupt-parent = <&MPIC>; |
| 154 |
interrupts = <88 1>; |
| 155 |
}; |
| 156 |
|
| 157 |
POB0: opb { |
| 158 |
compatible = "ibm,opb-4xx", "ibm,opb"; |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <1>; |
| 161 |
/* Wish there was a nicer way of specifying a full |
| 162 |
* 32-bit range |
| 163 |
*/ |
| 164 |
ranges = <0x00000000 0x0000033f 0x00000000 0x80000000 |
| 165 |
0x80000000 0x0000033f 0x80000000 0x80000000>; |
| 166 |
clock-frequency = <100000000>; |
| 167 |
|
| 168 |
RGMII0: emac-rgmii-wol@50004 { |
| 169 |
compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol"; |
| 170 |
reg = <0x50004 0x00000008>; |
| 171 |
has-mdio; |
| 172 |
}; |
| 173 |
|
| 174 |
EMAC0: ethernet@30000 { |
| 175 |
device_type = "network"; |
| 176 |
compatible = "ibm,emac-476gtr", "ibm,emac4sync"; |
| 177 |
interrupt-parent = <&EMAC0>; |
| 178 |
interrupts = <0x0 0x1>; |
| 179 |
#interrupt-cells = <1>; |
| 180 |
#address-cells = <0>; |
| 181 |
#size-cells = <0>; |
| 182 |
interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4 |
| 183 |
/*Wake*/ 0x1 &MPIC 82 0x4>; |
| 184 |
reg = <0x30000 0x78>; |
| 185 |
|
| 186 |
/* local-mac-address will normally be added by |
| 187 |
* the wrapper. If your device doesn't support |
| 188 |
* passing data to the wrapper (in the form |
| 189 |
* local-mac-addr=<hwaddr>) then you will need |
| 190 |
* to set it manually here. */ |
| 191 |
//local-mac-address = [000000000000]; |
| 192 |
|
| 193 |
mal-device = <&MAL0>; |
| 194 |
mal-tx-channel = <0>; |
| 195 |
mal-rx-channel = <0>; |
| 196 |
cell-index = <0>; |
| 197 |
max-frame-size = <9000>; |
| 198 |
rx-fifo-size = <4096>; |
| 199 |
tx-fifo-size = <2048>; |
| 200 |
rx-fifo-size-gige = <16384>; |
| 201 |
phy-mode = "rgmii"; |
| 202 |
phy-map = <0x00000000>; |
| 203 |
rgmii-wol-device = <&RGMII0>; |
| 204 |
has-inverted-stacr-oc; |
| 205 |
has-new-stacr-staopc; |
| 206 |
}; |
| 207 |
|
| 208 |
UART0: serial@10000 { |
| 209 |
device_type = "serial"; |
| 210 |
compatible = "ns16750", "ns16550"; |
| 211 |
reg = <0x10000 0x00000008>; |
| 212 |
virtual-reg = <0xe8010000>; |
| 213 |
clock-frequency = <1851851>; |
| 214 |
current-speed = <38400>; |
| 215 |
interrupt-parent = <&MPIC>; |
| 216 |
interrupts = <39 2>; |
| 217 |
}; |
| 218 |
|
| 219 |
IIC0: i2c@0 { |
| 220 |
compatible = "ibm,iic-476gtr", "ibm,iic"; |
| 221 |
reg = <0x0 0x00000020>; |
| 222 |
interrupt-parent = <&MPIC>; |
| 223 |
interrupts = <37 2>; |
| 224 |
#address-cells = <1>; |
| 225 |
#size-cells = <0>; |
| 226 |
rtc@68 { |
| 227 |
compatible = "st,m41t80", "m41st85"; |
| 228 |
reg = <0x68>; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
IIC1: i2c@100 { |
| 233 |
compatible = "ibm,iic-476gtr", "ibm,iic"; |
| 234 |
reg = <0x100 0x00000020>; |
| 235 |
interrupt-parent = <&MPIC>; |
| 236 |
interrupts = <38 2>; |
| 237 |
#address-cells = <1>; |
| 238 |
#size-cells = <0>; |
| 239 |
avr@58 { |
| 240 |
compatible = "ibm,akebono-avr"; |
| 241 |
reg = <0x58>; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
FPGA0: fpga@ebc00000 { |
| 246 |
compatible = "ibm,akebono-fpga"; |
| 247 |
reg = <0xebc00000 0x8>; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
PCIE0: pcie@10100000000 { |
| 252 |
device_type = "pci"; |
| 253 |
#interrupt-cells = <1>; |
| 254 |
#size-cells = <2>; |
| 255 |
#address-cells = <3>; |
| 256 |
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; |
| 257 |
primary; |
| 258 |
port = <0x0>; /* port number */ |
| 259 |
reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ |
| 260 |
0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ |
| 261 |
dcr-reg = <0xc0 0x20>; |
| 262 |
|
| 263 |
// pci_space < pci_addr > < cpu_addr > < size > |
| 264 |
ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 |
| 265 |
0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; |
| 266 |
|
| 267 |
/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI |
| 268 |
* PCI devices must be able to write to the HSTA module. |
| 269 |
*/ |
| 270 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; |
| 271 |
|
| 272 |
/* This drives busses 0 to 0xf */ |
| 273 |
bus-range = <0x0 0xf>; |
| 274 |
|
| 275 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 276 |
* to invert PCIe legacy interrupts). |
| 277 |
* We are de-swizzling here because the numbers are actually for |
| 278 |
* port of the root complex virtual P2P bridge. But I want |
| 279 |
* to avoid putting a node for it in the tree, so the numbers |
| 280 |
* below are basically de-swizzled numbers. |
| 281 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 282 |
*/ |
| 283 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 284 |
interrupt-map = < |
| 285 |
0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */ |
| 286 |
0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */ |
| 287 |
0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */ |
| 288 |
0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>; |
| 289 |
}; |
| 290 |
|
| 291 |
PCIE1: pcie@20100000000 { |
| 292 |
device_type = "pci"; |
| 293 |
#interrupt-cells = <1>; |
| 294 |
#size-cells = <2>; |
| 295 |
#address-cells = <3>; |
| 296 |
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; |
| 297 |
primary; |
| 298 |
port = <0x1>; /* port number */ |
| 299 |
reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */ |
| 300 |
0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ |
| 301 |
dcr-reg = <0x100 0x20>; |
| 302 |
|
| 303 |
// pci_space < pci_addr > < cpu_addr > < size > |
| 304 |
ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000 |
| 305 |
0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>; |
| 306 |
|
| 307 |
/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI |
| 308 |
* PCI devices must be able to write to the HSTA module. |
| 309 |
*/ |
| 310 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; |
| 311 |
|
| 312 |
/* This drives busses 0 to 0xf */ |
| 313 |
bus-range = <0x0 0xf>; |
| 314 |
|
| 315 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 316 |
* to invert PCIe legacy interrupts). |
| 317 |
* We are de-swizzling here because the numbers are actually for |
| 318 |
* port of the root complex virtual P2P bridge. But I want |
| 319 |
* to avoid putting a node for it in the tree, so the numbers |
| 320 |
* below are basically de-swizzled numbers. |
| 321 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 322 |
*/ |
| 323 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 324 |
interrupt-map = < |
| 325 |
0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */ |
| 326 |
0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */ |
| 327 |
0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */ |
| 328 |
0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>; |
| 329 |
}; |
| 330 |
|
| 331 |
PCIE2: pcie@18100000000 { |
| 332 |
device_type = "pci"; |
| 333 |
#interrupt-cells = <1>; |
| 334 |
#size-cells = <2>; |
| 335 |
#address-cells = <3>; |
| 336 |
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; |
| 337 |
primary; |
| 338 |
port = <0x2>; /* port number */ |
| 339 |
reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */ |
| 340 |
0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ |
| 341 |
dcr-reg = <0xe0 0x20>; |
| 342 |
|
| 343 |
// pci_space < pci_addr > < cpu_addr > < size > |
| 344 |
ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000 |
| 345 |
0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>; |
| 346 |
|
| 347 |
/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI |
| 348 |
* PCI devices must be able to write to the HSTA module. |
| 349 |
*/ |
| 350 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; |
| 351 |
|
| 352 |
/* This drives busses 0 to 0xf */ |
| 353 |
bus-range = <0x0 0xf>; |
| 354 |
|
| 355 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 356 |
* to invert PCIe legacy interrupts). |
| 357 |
* We are de-swizzling here because the numbers are actually for |
| 358 |
* port of the root complex virtual P2P bridge. But I want |
| 359 |
* to avoid putting a node for it in the tree, so the numbers |
| 360 |
* below are basically de-swizzled numbers. |
| 361 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 362 |
*/ |
| 363 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 364 |
interrupt-map = < |
| 365 |
0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */ |
| 366 |
0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */ |
| 367 |
0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */ |
| 368 |
0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>; |
| 369 |
}; |
| 370 |
|
| 371 |
PCIE3: pcie@28100000000 { |
| 372 |
device_type = "pci"; |
| 373 |
#interrupt-cells = <1>; |
| 374 |
#size-cells = <2>; |
| 375 |
#address-cells = <3>; |
| 376 |
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; |
| 377 |
primary; |
| 378 |
port = <0x3>; /* port number */ |
| 379 |
reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */ |
| 380 |
0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ |
| 381 |
dcr-reg = <0x120 0x20>; |
| 382 |
|
| 383 |
// pci_space < pci_addr > < cpu_addr > < size > |
| 384 |
ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000 |
| 385 |
0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>; |
| 386 |
|
| 387 |
/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI |
| 388 |
* PCI devices must be able to write to the HSTA module. |
| 389 |
*/ |
| 390 |
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; |
| 391 |
|
| 392 |
/* This drives busses 0 to 0xf */ |
| 393 |
bus-range = <0x0 0xf>; |
| 394 |
|
| 395 |
/* Legacy interrupts (note the weird polarity, the bridge seems |
| 396 |
* to invert PCIe legacy interrupts). |
| 397 |
* We are de-swizzling here because the numbers are actually for |
| 398 |
* port of the root complex virtual P2P bridge. But I want |
| 399 |
* to avoid putting a node for it in the tree, so the numbers |
| 400 |
* below are basically de-swizzled numbers. |
| 401 |
* The real slot is on idsel 0, so the swizzling is 1:1 |
| 402 |
*/ |
| 403 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 404 |
interrupt-map = < |
| 405 |
0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */ |
| 406 |
0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */ |
| 407 |
0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */ |
| 408 |
0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>; |
| 409 |
}; |
| 410 |
}; |
| 411 |
|
| 412 |
chosen { |
| 413 |
stdout-path = &UART0; |
| 414 |
}; |
| 415 |
}; |