| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Device Tree Source for the MPC5121e based ac14xx board |
| 4 |
* |
| 5 |
* Copyright 2012 Anatolij Gustschin <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
|
| 9 |
#include "mpc5121.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "ac14xx"; |
| 13 |
compatible = "ifm,ac14xx", "fsl,mpc5121"; |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <1>; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &serial0; |
| 19 |
serial1 = &serial7; |
| 20 |
spi4 = &spi4; |
| 21 |
spi5 = &spi5; |
| 22 |
}; |
| 23 |
|
| 24 |
cpus { |
| 25 |
PowerPC,5121@0 { |
| 26 |
timebase-frequency = <40000000>; /* 40 MHz (csb/4) */ |
| 27 |
bus-frequency = <160000000>; /* 160 MHz csb bus */ |
| 28 |
clock-frequency = <400000000>; /* 400 MHz ppc core */ |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
memory { |
| 33 |
reg = <0x00000000 0x10000000>; /* 256MB at 0 */ |
| 34 |
}; |
| 35 |
|
| 36 |
nfc@40000000 { |
| 37 |
status = "disabled"; |
| 38 |
}; |
| 39 |
|
| 40 |
localbus@80000020 { |
| 41 |
ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */ |
| 42 |
0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */ |
| 43 |
0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */ |
| 44 |
0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */ |
| 45 |
0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */ |
| 46 |
0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */ |
| 47 |
|
| 48 |
flash@0,0 { |
| 49 |
compatible = "cfi-flash"; |
| 50 |
reg = <0 0x00000000 0x04000000>; |
| 51 |
#address-cells = <1>; |
| 52 |
#size-cells = <1>; |
| 53 |
bank-width = <2>; |
| 54 |
device-width = <2>; |
| 55 |
|
| 56 |
partition@0 { |
| 57 |
label = "dtb-kernel-production"; |
| 58 |
reg = <0x00000000 0x00400000>; |
| 59 |
}; |
| 60 |
partition@1 { |
| 61 |
label = "filesystem-production"; |
| 62 |
reg = <0x00400000 0x03400000>; |
| 63 |
}; |
| 64 |
|
| 65 |
partition@2 { |
| 66 |
label = "recovery"; |
| 67 |
reg = <0x03800000 0x00700000>; |
| 68 |
}; |
| 69 |
|
| 70 |
partition@3 { |
| 71 |
label = "uboot-code"; |
| 72 |
reg = <0x03f00000 0x00040000>; |
| 73 |
}; |
| 74 |
partition@4 { |
| 75 |
label = "uboot-env1"; |
| 76 |
reg = <0x03f40000 0x00020000>; |
| 77 |
}; |
| 78 |
partition@5 { |
| 79 |
label = "uboot-env2"; |
| 80 |
reg = <0x03f60000 0x00020000>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
fram@1,0 { |
| 85 |
compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq"; |
| 86 |
reg = <1 0x00000000 0x00010000>; |
| 87 |
}; |
| 88 |
|
| 89 |
asi@2,0 { |
| 90 |
/* masters mapping: CS, CS offset, size */ |
| 91 |
reg = <2 0x00000000 0x00080000 |
| 92 |
6 0x00000000 0x00080000>; |
| 93 |
#address-cells = <1>; |
| 94 |
#size-cells = <1>; |
| 95 |
compatible = "ifm,ac14xx-asi-fpga"; |
| 96 |
gpios = < |
| 97 |
&gpio_pic 26 0 /* prog */ |
| 98 |
&gpio_pic 27 0 /* done */ |
| 99 |
&gpio_pic 10 0 /* reset */ |
| 100 |
>; |
| 101 |
|
| 102 |
master@1 { |
| 103 |
interrupts = <20 0x2>; |
| 104 |
interrupt-parent = <&gpio_pic>; |
| 105 |
chipselect = <2 0x00009000 0x00009100>; |
| 106 |
label = "AS-i master 1"; |
| 107 |
}; |
| 108 |
|
| 109 |
master@2 { |
| 110 |
interrupts = <21 0x2>; |
| 111 |
interrupt-parent = <&gpio_pic>; |
| 112 |
chipselect = <6 0x00009000 0x00009100>; |
| 113 |
label = "AS-i master 2"; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
netx@3,0 { |
| 118 |
compatible = "ifm,netx"; |
| 119 |
reg = <0x3 0x00000000 0x00020000>; |
| 120 |
chipselect = <3 0x00101140 0x00203100>; |
| 121 |
interrupts = <17 0x8>; |
| 122 |
gpios = <&gpio_pic 15 0>; |
| 123 |
}; |
| 124 |
|
| 125 |
safety@5,0 { |
| 126 |
compatible = "ifm,safety"; |
| 127 |
reg = <0x5 0x00000000 0x00010000>; |
| 128 |
chipselect = <5 0x00009000 0x00009100>; |
| 129 |
interrupts = <22 0x2>; |
| 130 |
interrupt-parent = <&gpio_pic>; |
| 131 |
gpios = < |
| 132 |
&gpio_pic 12 0 /* prog */ |
| 133 |
&gpio_pic 11 0 /* done */ |
| 134 |
>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
clocks { |
| 139 |
osc { |
| 140 |
clock-frequency = <25000000>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
soc@80000000 { |
| 145 |
bus-frequency = <80000000>; /* 80 MHz ips bus */ |
| 146 |
|
| 147 |
clock@f00 { |
| 148 |
compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock"; |
| 149 |
}; |
| 150 |
|
| 151 |
/* |
| 152 |
* GPIO PIC: |
| 153 |
* interrupts cell = <pin nr, sense> |
| 154 |
* sense == 8: Level, low assertion |
| 155 |
* sense == 2: Edge, high-to-low change |
| 156 |
*/ |
| 157 |
gpio_pic: gpio@1100 { |
| 158 |
gpio-controller; |
| 159 |
#gpio-cells = <2>; |
| 160 |
interrupt-controller; |
| 161 |
#interrupt-cells = <2>; |
| 162 |
}; |
| 163 |
|
| 164 |
sdhc@1500 { |
| 165 |
cd-gpios = <&gpio_pic 23 0>; /* card detect */ |
| 166 |
wp-gpios = <&gpio_pic 24 0>; /* write protect */ |
| 167 |
wp-inverted; /* WP active high */ |
| 168 |
}; |
| 169 |
|
| 170 |
i2c@1700 { |
| 171 |
/* use Fast-mode */ |
| 172 |
clock-frequency = <400000>; |
| 173 |
|
| 174 |
at24@30 { |
| 175 |
compatible = "atmel,24c01"; |
| 176 |
reg = <0x30>; |
| 177 |
}; |
| 178 |
|
| 179 |
at24@31 { |
| 180 |
compatible = "atmel,24c01"; |
| 181 |
reg = <0x31>; |
| 182 |
}; |
| 183 |
|
| 184 |
temp@48 { |
| 185 |
compatible = "ad,ad7414"; |
| 186 |
reg = <0x48>; |
| 187 |
}; |
| 188 |
|
| 189 |
at24@50 { |
| 190 |
compatible = "atmel,24c01"; |
| 191 |
reg = <0x50>; |
| 192 |
}; |
| 193 |
|
| 194 |
at24@51 { |
| 195 |
compatible = "atmel,24c01"; |
| 196 |
reg = <0x51>; |
| 197 |
}; |
| 198 |
|
| 199 |
at24@52 { |
| 200 |
compatible = "atmel,24c01"; |
| 201 |
reg = <0x52>; |
| 202 |
}; |
| 203 |
|
| 204 |
at24@53 { |
| 205 |
compatible = "atmel,24c01"; |
| 206 |
reg = <0x53>; |
| 207 |
}; |
| 208 |
|
| 209 |
at24@54 { |
| 210 |
compatible = "atmel,24c01"; |
| 211 |
reg = <0x54>; |
| 212 |
}; |
| 213 |
|
| 214 |
at24@55 { |
| 215 |
compatible = "atmel,24c01"; |
| 216 |
reg = <0x55>; |
| 217 |
}; |
| 218 |
|
| 219 |
at24@56 { |
| 220 |
compatible = "atmel,24c01"; |
| 221 |
reg = <0x56>; |
| 222 |
}; |
| 223 |
|
| 224 |
at24@57 { |
| 225 |
compatible = "atmel,24c01"; |
| 226 |
reg = <0x57>; |
| 227 |
}; |
| 228 |
|
| 229 |
rtc@68 { |
| 230 |
compatible = "st,m41t00"; |
| 231 |
reg = <0x68>; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
axe_pic: axe-base@2000 { |
| 236 |
compatible = "fsl,mpc5121-axe-base"; |
| 237 |
reg = <0x2000 0x100>; |
| 238 |
interrupts = <42 0x8>; |
| 239 |
interrupt-controller; |
| 240 |
#interrupt-cells = <2>; |
| 241 |
}; |
| 242 |
|
| 243 |
axe-app { |
| 244 |
compatible = "fsl,mpc5121-axe-app"; |
| 245 |
interrupt-parent = <&axe_pic>; |
| 246 |
interrupts = < |
| 247 |
/* soft interrupts */ |
| 248 |
0 0x0 1 0x0 2 0x0 3 0x0 |
| 249 |
4 0x0 5 0x0 6 0x0 7 0x0 |
| 250 |
/* fifo interrupts */ |
| 251 |
8 0x0 9 0x0 10 0x0 11 0x0 |
| 252 |
>; |
| 253 |
}; |
| 254 |
|
| 255 |
display@2100 { |
| 256 |
edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00 |
| 257 |
0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27 |
| 258 |
1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01 |
| 259 |
01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04 |
| 260 |
21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F |
| 261 |
3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45 |
| 262 |
54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10 |
| 263 |
00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5]; |
| 264 |
}; |
| 265 |
|
| 266 |
can@2300 { |
| 267 |
status = "disabled"; |
| 268 |
}; |
| 269 |
|
| 270 |
can@2380 { |
| 271 |
status = "disabled"; |
| 272 |
}; |
| 273 |
|
| 274 |
viu@2400 { |
| 275 |
status = "disabled"; |
| 276 |
}; |
| 277 |
|
| 278 |
mdio@2800 { |
| 279 |
phy0: ethernet-phy@1f { |
| 280 |
compatible = "smsc,lan8700"; |
| 281 |
reg = <0x1f>; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
enet: ethernet@2800 { |
| 286 |
phy-handle = <&phy0>; |
| 287 |
}; |
| 288 |
|
| 289 |
usb@3000 { |
| 290 |
status = "disabled"; |
| 291 |
}; |
| 292 |
|
| 293 |
usb@4000 { |
| 294 |
status = "disabled"; |
| 295 |
}; |
| 296 |
|
| 297 |
/* PSC3 serial port A, aka ttyPSC0 */ |
| 298 |
serial0: psc@11300 { |
| 299 |
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
| 300 |
fsl,rx-fifo-size = <512>; |
| 301 |
fsl,tx-fifo-size = <512>; |
| 302 |
}; |
| 303 |
|
| 304 |
/* PSC4 in SPI mode */ |
| 305 |
spi4: psc@11400 { |
| 306 |
compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; |
| 307 |
fsl,rx-fifo-size = <768>; |
| 308 |
fsl,tx-fifo-size = <768>; |
| 309 |
#address-cells = <1>; |
| 310 |
#size-cells = <0>; |
| 311 |
num-cs = <1>; |
| 312 |
cs-gpios = <&gpio_pic 25 0>; |
| 313 |
|
| 314 |
flash: m25p128@0 { |
| 315 |
compatible = "st,m25p128"; |
| 316 |
spi-max-frequency = <20000000>; |
| 317 |
reg = <0>; |
| 318 |
#address-cells = <1>; |
| 319 |
#size-cells = <1>; |
| 320 |
|
| 321 |
partition@0 { |
| 322 |
label = "spi-flash0"; |
| 323 |
reg = <0x00000000 0x01000000>; |
| 324 |
}; |
| 325 |
}; |
| 326 |
}; |
| 327 |
|
| 328 |
/* PSC5 in SPI mode */ |
| 329 |
spi5: psc@11500 { |
| 330 |
compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; |
| 331 |
fsl,mode = "spi-master"; |
| 332 |
fsl,rx-fifo-size = <128>; |
| 333 |
fsl,tx-fifo-size = <128>; |
| 334 |
#address-cells = <1>; |
| 335 |
#size-cells = <0>; |
| 336 |
|
| 337 |
lcd@0 { |
| 338 |
compatible = "ilitek,ili922x"; |
| 339 |
reg = <0>; |
| 340 |
spi-max-frequency = <100000>; |
| 341 |
spi-cpol; |
| 342 |
spi-cpha; |
| 343 |
}; |
| 344 |
}; |
| 345 |
|
| 346 |
/* PSC7 serial port C, aka ttyPSC2 */ |
| 347 |
serial7: psc@11700 { |
| 348 |
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
| 349 |
fsl,rx-fifo-size = <512>; |
| 350 |
fsl,tx-fifo-size = <512>; |
| 351 |
}; |
| 352 |
|
| 353 |
matrix_keypad@0 { |
| 354 |
compatible = "gpio-matrix-keypad"; |
| 355 |
debounce-delay-ms = <5>; |
| 356 |
col-scan-delay-us = <1>; |
| 357 |
gpio-activelow; |
| 358 |
col-gpios-binary; |
| 359 |
col-switch-delay-ms = <200>; |
| 360 |
|
| 361 |
col-gpios = <&gpio_pic 1 0>; /* pin1 */ |
| 362 |
|
| 363 |
row-gpios = <&gpio_pic 2 0 /* pin2 */ |
| 364 |
&gpio_pic 3 0 /* pin3 */ |
| 365 |
&gpio_pic 4 0>; /* pin4 */ |
| 366 |
|
| 367 |
linux,keymap = <0x0000006e /* FN LEFT */ |
| 368 |
0x01000067 /* UP */ |
| 369 |
0x02000066 /* FN RIGHT */ |
| 370 |
0x00010069 /* LEFT */ |
| 371 |
0x0101006a /* DOWN */ |
| 372 |
0x0201006c>; /* RIGHT */ |
| 373 |
}; |
| 374 |
}; |
| 375 |
|
| 376 |
leds { |
| 377 |
compatible = "gpio-leds"; |
| 378 |
|
| 379 |
backlight { |
| 380 |
label = "backlight"; |
| 381 |
gpios = <&gpio_pic 0 0>; |
| 382 |
default-state = "keep"; |
| 383 |
}; |
| 384 |
green { |
| 385 |
label = "green"; |
| 386 |
gpios = <&gpio_pic 18 0>; |
| 387 |
default-state = "keep"; |
| 388 |
}; |
| 389 |
red { |
| 390 |
label = "red"; |
| 391 |
gpios = <&gpio_pic 19 0>; |
| 392 |
default-state = "keep"; |
| 393 |
}; |
| 394 |
}; |
| 395 |
}; |