| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* dts file for Xilinx ZynqMP |
| 4 |
* |
| 5 |
* (C) Copyright 2014 - 2021, Xilinx, Inc. |
| 6 |
* |
| 7 |
* Michal Simek <[email protected]> |
| 8 |
* |
| 9 |
* This program is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of |
| 12 |
* the License, or (at your option) any later version. |
| 13 |
*/ |
| 14 |
|
| 15 |
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> |
| 16 |
#include <dt-bindings/gpio/gpio.h> |
| 17 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 18 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 19 |
#include <dt-bindings/power/xlnx-zynqmp-power.h> |
| 20 |
#include <dt-bindings/reset/xlnx-zynqmp-resets.h> |
| 21 |
#include <dt-bindings/thermal/thermal.h> |
| 22 |
|
| 23 |
/ { |
| 24 |
compatible = "xlnx,zynqmp"; |
| 25 |
#address-cells = <2>; |
| 26 |
#size-cells = <2>; |
| 27 |
|
| 28 |
options { |
| 29 |
u-boot { |
| 30 |
compatible = "u-boot,config"; |
| 31 |
bootscr-address = /bits/ 64 <0x20000000>; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
cpus { |
| 36 |
#address-cells = <1>; |
| 37 |
#size-cells = <0>; |
| 38 |
|
| 39 |
cpu0: cpu@0 { |
| 40 |
#cooling-cells = <2>; |
| 41 |
compatible = "arm,cortex-a53"; |
| 42 |
device_type = "cpu"; |
| 43 |
enable-method = "psci"; |
| 44 |
operating-points-v2 = <&cpu_opp_table>; |
| 45 |
reg = <0x0>; |
| 46 |
cpu-idle-states = <&CPU_SLEEP_0>; |
| 47 |
next-level-cache = <&L2>; |
| 48 |
}; |
| 49 |
|
| 50 |
cpu1: cpu@1 { |
| 51 |
#cooling-cells = <2>; |
| 52 |
compatible = "arm,cortex-a53"; |
| 53 |
device_type = "cpu"; |
| 54 |
enable-method = "psci"; |
| 55 |
reg = <0x1>; |
| 56 |
operating-points-v2 = <&cpu_opp_table>; |
| 57 |
cpu-idle-states = <&CPU_SLEEP_0>; |
| 58 |
next-level-cache = <&L2>; |
| 59 |
}; |
| 60 |
|
| 61 |
cpu2: cpu@2 { |
| 62 |
#cooling-cells = <2>; |
| 63 |
compatible = "arm,cortex-a53"; |
| 64 |
device_type = "cpu"; |
| 65 |
enable-method = "psci"; |
| 66 |
reg = <0x2>; |
| 67 |
operating-points-v2 = <&cpu_opp_table>; |
| 68 |
cpu-idle-states = <&CPU_SLEEP_0>; |
| 69 |
next-level-cache = <&L2>; |
| 70 |
}; |
| 71 |
|
| 72 |
cpu3: cpu@3 { |
| 73 |
#cooling-cells = <2>; |
| 74 |
compatible = "arm,cortex-a53"; |
| 75 |
device_type = "cpu"; |
| 76 |
enable-method = "psci"; |
| 77 |
reg = <0x3>; |
| 78 |
operating-points-v2 = <&cpu_opp_table>; |
| 79 |
cpu-idle-states = <&CPU_SLEEP_0>; |
| 80 |
next-level-cache = <&L2>; |
| 81 |
}; |
| 82 |
|
| 83 |
L2: l2-cache { |
| 84 |
compatible = "cache"; |
| 85 |
cache-level = <2>; |
| 86 |
cache-unified; |
| 87 |
}; |
| 88 |
|
| 89 |
idle-states { |
| 90 |
entry-method = "psci"; |
| 91 |
|
| 92 |
CPU_SLEEP_0: cpu-sleep-0 { |
| 93 |
compatible = "arm,idle-state"; |
| 94 |
arm,psci-suspend-param = <0x40000000>; |
| 95 |
local-timer-stop; |
| 96 |
entry-latency-us = <300>; |
| 97 |
exit-latency-us = <600>; |
| 98 |
min-residency-us = <10000>; |
| 99 |
}; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
cpu_opp_table: opp-table-cpu { |
| 104 |
compatible = "operating-points-v2"; |
| 105 |
opp-shared; |
| 106 |
opp-1200000000 { |
| 107 |
opp-hz = /bits/ 64 <1200000000>; |
| 108 |
opp-microvolt = <1000000>; |
| 109 |
clock-latency-ns = <500000>; |
| 110 |
}; |
| 111 |
opp-600000000 { |
| 112 |
opp-hz = /bits/ 64 <600000000>; |
| 113 |
opp-microvolt = <1000000>; |
| 114 |
clock-latency-ns = <500000>; |
| 115 |
}; |
| 116 |
opp-400000000 { |
| 117 |
opp-hz = /bits/ 64 <400000000>; |
| 118 |
opp-microvolt = <1000000>; |
| 119 |
clock-latency-ns = <500000>; |
| 120 |
}; |
| 121 |
opp-300000000 { |
| 122 |
opp-hz = /bits/ 64 <300000000>; |
| 123 |
opp-microvolt = <1000000>; |
| 124 |
clock-latency-ns = <500000>; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
reserved-memory { |
| 129 |
#address-cells = <2>; |
| 130 |
#size-cells = <2>; |
| 131 |
ranges; |
| 132 |
|
| 133 |
rproc_0_fw_image: memory@3ed00000 { |
| 134 |
no-map; |
| 135 |
reg = <0x0 0x3ed00000 0x0 0x40000>; |
| 136 |
}; |
| 137 |
|
| 138 |
rproc_1_fw_image: memory@3ef00000 { |
| 139 |
no-map; |
| 140 |
reg = <0x0 0x3ef00000 0x0 0x40000>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
zynqmp_ipi: zynqmp-ipi { |
| 145 |
bootph-all; |
| 146 |
compatible = "xlnx,zynqmp-ipi-mailbox"; |
| 147 |
interrupt-parent = <&gic>; |
| 148 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 149 |
xlnx,ipi-id = <0>; |
| 150 |
#address-cells = <2>; |
| 151 |
#size-cells = <2>; |
| 152 |
ranges; |
| 153 |
|
| 154 |
ipi_mailbox_pmu1: mailbox@ff9905c0 { |
| 155 |
bootph-all; |
| 156 |
compatible = "xlnx,zynqmp-ipi-dest-mailbox"; |
| 157 |
reg = <0x0 0xff9905c0 0x0 0x20>, |
| 158 |
<0x0 0xff9905e0 0x0 0x20>, |
| 159 |
<0x0 0xff990e80 0x0 0x20>, |
| 160 |
<0x0 0xff990ea0 0x0 0x20>; |
| 161 |
reg-names = "local_request_region", |
| 162 |
"local_response_region", |
| 163 |
"remote_request_region", |
| 164 |
"remote_response_region"; |
| 165 |
#mbox-cells = <1>; |
| 166 |
xlnx,ipi-id = <4>; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
dcc: dcc { |
| 171 |
compatible = "arm,dcc"; |
| 172 |
status = "disabled"; |
| 173 |
bootph-all; |
| 174 |
}; |
| 175 |
|
| 176 |
pmu { |
| 177 |
compatible = "arm,cortex-a53-pmu"; |
| 178 |
interrupt-parent = <&gic>; |
| 179 |
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| 180 |
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 181 |
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 182 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| 183 |
interrupt-affinity = <&cpu0>, |
| 184 |
<&cpu1>, |
| 185 |
<&cpu2>, |
| 186 |
<&cpu3>; |
| 187 |
}; |
| 188 |
|
| 189 |
psci { |
| 190 |
compatible = "arm,psci-1.0", "arm,psci-0.2"; |
| 191 |
method = "smc"; |
| 192 |
}; |
| 193 |
|
| 194 |
firmware { |
| 195 |
zynqmp_firmware: zynqmp-firmware { |
| 196 |
compatible = "xlnx,zynqmp-firmware"; |
| 197 |
#power-domain-cells = <1>; |
| 198 |
method = "smc"; |
| 199 |
bootph-all; |
| 200 |
|
| 201 |
zynqmp_power: power-management { |
| 202 |
bootph-all; |
| 203 |
compatible = "xlnx,zynqmp-power"; |
| 204 |
interrupt-parent = <&gic>; |
| 205 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 206 |
mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>; |
| 207 |
mbox-names = "tx", "rx"; |
| 208 |
}; |
| 209 |
|
| 210 |
soc-nvmem { |
| 211 |
compatible = "xlnx,zynqmp-nvmem-fw"; |
| 212 |
nvmem-layout { |
| 213 |
compatible = "fixed-layout"; |
| 214 |
#address-cells = <1>; |
| 215 |
#size-cells = <1>; |
| 216 |
|
| 217 |
soc_revision: soc-revision@0 { |
| 218 |
reg = <0x0 0x4>; |
| 219 |
}; |
| 220 |
/* efuse access */ |
| 221 |
efuse_dna: efuse-dna@c { |
| 222 |
reg = <0xc 0xc>; |
| 223 |
}; |
| 224 |
efuse_usr0: efuse-usr0@20 { |
| 225 |
reg = <0x20 0x4>; |
| 226 |
}; |
| 227 |
efuse_usr1: efuse-usr1@24 { |
| 228 |
reg = <0x24 0x4>; |
| 229 |
}; |
| 230 |
efuse_usr2: efuse-usr2@28 { |
| 231 |
reg = <0x28 0x4>; |
| 232 |
}; |
| 233 |
efuse_usr3: efuse-usr3@2c { |
| 234 |
reg = <0x2c 0x4>; |
| 235 |
}; |
| 236 |
efuse_usr4: efuse-usr4@30 { |
| 237 |
reg = <0x30 0x4>; |
| 238 |
}; |
| 239 |
efuse_usr5: efuse-usr5@34 { |
| 240 |
reg = <0x34 0x4>; |
| 241 |
}; |
| 242 |
efuse_usr6: efuse-usr6@38 { |
| 243 |
reg = <0x38 0x4>; |
| 244 |
}; |
| 245 |
efuse_usr7: efuse-usr7@3c { |
| 246 |
reg = <0x3c 0x4>; |
| 247 |
}; |
| 248 |
efuse_miscusr: efuse-miscusr@40 { |
| 249 |
reg = <0x40 0x4>; |
| 250 |
}; |
| 251 |
efuse_chash: efuse-chash@50 { |
| 252 |
reg = <0x50 0x4>; |
| 253 |
}; |
| 254 |
efuse_pufmisc: efuse-pufmisc@54 { |
| 255 |
reg = <0x54 0x4>; |
| 256 |
}; |
| 257 |
efuse_sec: efuse-sec@58 { |
| 258 |
reg = <0x58 0x4>; |
| 259 |
}; |
| 260 |
efuse_spkid: efuse-spkid@5c { |
| 261 |
reg = <0x5c 0x4>; |
| 262 |
}; |
| 263 |
efuse_aeskey: efuse-aeskey@60 { |
| 264 |
reg = <0x60 0x20>; |
| 265 |
}; |
| 266 |
efuse_ppk0hash: efuse-ppk0hash@a0 { |
| 267 |
reg = <0xa0 0x30>; |
| 268 |
}; |
| 269 |
efuse_ppk1hash: efuse-ppk1hash@d0 { |
| 270 |
reg = <0xd0 0x30>; |
| 271 |
}; |
| 272 |
efuse_pufuser: efuse-pufuser@100 { |
| 273 |
reg = <0x100 0x7F>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
}; |
| 277 |
|
| 278 |
zynqmp_pcap: pcap { |
| 279 |
compatible = "xlnx,zynqmp-pcap-fpga"; |
| 280 |
}; |
| 281 |
|
| 282 |
xlnx_aes: zynqmp-aes { |
| 283 |
compatible = "xlnx,zynqmp-aes"; |
| 284 |
}; |
| 285 |
|
| 286 |
zynqmp_reset: reset-controller { |
| 287 |
compatible = "xlnx,zynqmp-reset"; |
| 288 |
#reset-cells = <1>; |
| 289 |
}; |
| 290 |
|
| 291 |
pinctrl0: pinctrl { |
| 292 |
compatible = "xlnx,zynqmp-pinctrl"; |
| 293 |
status = "disabled"; |
| 294 |
}; |
| 295 |
|
| 296 |
modepin_gpio: gpio { |
| 297 |
compatible = "xlnx,zynqmp-gpio-modepin"; |
| 298 |
gpio-controller; |
| 299 |
#gpio-cells = <2>; |
| 300 |
}; |
| 301 |
}; |
| 302 |
}; |
| 303 |
|
| 304 |
timer { |
| 305 |
compatible = "arm,armv8-timer"; |
| 306 |
interrupt-parent = <&gic>; |
| 307 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 308 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 309 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 310 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 311 |
}; |
| 312 |
|
| 313 |
fpga_full: fpga-region { |
| 314 |
compatible = "fpga-region"; |
| 315 |
fpga-mgr = <&zynqmp_pcap>; |
| 316 |
#address-cells = <2>; |
| 317 |
#size-cells = <2>; |
| 318 |
ranges; |
| 319 |
}; |
| 320 |
|
| 321 |
rproc_lockstep: remoteproc@ffe00000 { |
| 322 |
compatible = "xlnx,zynqmp-r5fss"; |
| 323 |
xlnx,cluster-mode = <1>; |
| 324 |
xlnx,tcm-mode = <1>; |
| 325 |
|
| 326 |
#address-cells = <2>; |
| 327 |
#size-cells = <2>; |
| 328 |
|
| 329 |
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, |
| 330 |
<0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, |
| 331 |
<0x0 0x10000 0x0 0xffe10000 0x0 0x10000>, |
| 332 |
<0x0 0x30000 0x0 0xffe30000 0x0 0x10000>; |
| 333 |
|
| 334 |
r5f@0 { |
| 335 |
compatible = "xlnx,zynqmp-r5f"; |
| 336 |
reg = <0x0 0x0 0x0 0x10000>, |
| 337 |
<0x0 0x20000 0x0 0x10000>, |
| 338 |
<0x0 0x10000 0x0 0x10000>, |
| 339 |
<0x0 0x30000 0x0 0x10000>; |
| 340 |
reg-names = "atcm0", "btcm0", "atcm1", "btcm1"; |
| 341 |
power-domains = <&zynqmp_firmware PD_RPU_0>, |
| 342 |
<&zynqmp_firmware PD_R5_0_ATCM>, |
| 343 |
<&zynqmp_firmware PD_R5_0_BTCM>, |
| 344 |
<&zynqmp_firmware PD_R5_1_ATCM>, |
| 345 |
<&zynqmp_firmware PD_R5_1_BTCM>; |
| 346 |
memory-region = <&rproc_0_fw_image>; |
| 347 |
}; |
| 348 |
|
| 349 |
r5f@1 { |
| 350 |
compatible = "xlnx,zynqmp-r5f"; |
| 351 |
reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; |
| 352 |
reg-names = "atcm0", "btcm0"; |
| 353 |
power-domains = <&zynqmp_firmware PD_RPU_1>, |
| 354 |
<&zynqmp_firmware PD_R5_1_ATCM>, |
| 355 |
<&zynqmp_firmware PD_R5_1_BTCM>; |
| 356 |
memory-region = <&rproc_1_fw_image>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
rproc_split: remoteproc-split@ffe00000 { |
| 361 |
status = "disabled"; |
| 362 |
compatible = "xlnx,zynqmp-r5fss"; |
| 363 |
xlnx,cluster-mode = <0>; |
| 364 |
xlnx,tcm-mode = <0>; |
| 365 |
|
| 366 |
#address-cells = <2>; |
| 367 |
#size-cells = <2>; |
| 368 |
|
| 369 |
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, |
| 370 |
<0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, |
| 371 |
<0x1 0x0 0x0 0xffe90000 0x0 0x10000>, |
| 372 |
<0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>; |
| 373 |
|
| 374 |
r5f@0 { |
| 375 |
compatible = "xlnx,zynqmp-r5f"; |
| 376 |
reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>; |
| 377 |
reg-names = "atcm0", "btcm0"; |
| 378 |
power-domains = <&zynqmp_firmware PD_RPU_0>, |
| 379 |
<&zynqmp_firmware PD_R5_0_ATCM>, |
| 380 |
<&zynqmp_firmware PD_R5_0_BTCM>; |
| 381 |
memory-region = <&rproc_0_fw_image>; |
| 382 |
}; |
| 383 |
|
| 384 |
r5f@1 { |
| 385 |
compatible = "xlnx,zynqmp-r5f"; |
| 386 |
reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; |
| 387 |
reg-names = "atcm0", "btcm0"; |
| 388 |
power-domains = <&zynqmp_firmware PD_RPU_1>, |
| 389 |
<&zynqmp_firmware PD_R5_1_ATCM>, |
| 390 |
<&zynqmp_firmware PD_R5_1_BTCM>; |
| 391 |
memory-region = <&rproc_1_fw_image>; |
| 392 |
}; |
| 393 |
}; |
| 394 |
|
| 395 |
ams { |
| 396 |
compatible = "iio-hwmon"; |
| 397 |
io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, |
| 398 |
<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, |
| 399 |
<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>, |
| 400 |
<&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>, |
| 401 |
<&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>, |
| 402 |
<&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>, |
| 403 |
<&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>, |
| 404 |
<&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>, |
| 405 |
<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>, |
| 406 |
<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>; |
| 407 |
}; |
| 408 |
|
| 409 |
|
| 410 |
tsens_apu: thermal-sensor-apu { |
| 411 |
compatible = "generic-adc-thermal"; |
| 412 |
#thermal-sensor-cells = <0>; |
| 413 |
io-channels = <&xilinx_ams 7>; |
| 414 |
io-channel-names = "sensor-channel"; |
| 415 |
}; |
| 416 |
|
| 417 |
tsens_rpu: thermal-sensor-rpu { |
| 418 |
compatible = "generic-adc-thermal"; |
| 419 |
#thermal-sensor-cells = <0>; |
| 420 |
io-channels = <&xilinx_ams 8>; |
| 421 |
io-channel-names = "sensor-channel"; |
| 422 |
}; |
| 423 |
|
| 424 |
tsens_pl: thermal-sensor-pl { |
| 425 |
compatible = "generic-adc-thermal"; |
| 426 |
#thermal-sensor-cells = <0>; |
| 427 |
io-channels = <&xilinx_ams 20>; |
| 428 |
io-channel-names = "sensor-channel"; |
| 429 |
}; |
| 430 |
|
| 431 |
thermal-zones { |
| 432 |
apu-thermal { |
| 433 |
polling-delay-passive = <1000>; |
| 434 |
polling-delay = <5000>; |
| 435 |
thermal-sensors = <&tsens_apu>; |
| 436 |
|
| 437 |
trips { |
| 438 |
apu_passive: passive { |
| 439 |
temperature = <93000>; |
| 440 |
hysteresis = <3500>; |
| 441 |
type = "passive"; |
| 442 |
}; |
| 443 |
|
| 444 |
apu_critical: critical { |
| 445 |
temperature = <96500>; |
| 446 |
hysteresis = <3500>; |
| 447 |
type = "critical"; |
| 448 |
}; |
| 449 |
}; |
| 450 |
|
| 451 |
cooling-maps { |
| 452 |
map { |
| 453 |
trip = <&apu_passive>; |
| 454 |
cooling-device = |
| 455 |
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 456 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 457 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 458 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 459 |
}; |
| 460 |
}; |
| 461 |
}; |
| 462 |
|
| 463 |
rpu-thermal { |
| 464 |
polling-delay = <10000>; |
| 465 |
thermal-sensors = <&tsens_rpu>; |
| 466 |
|
| 467 |
trips { |
| 468 |
critical { |
| 469 |
temperature = <96500>; |
| 470 |
hysteresis = <3500>; |
| 471 |
type = "critical"; |
| 472 |
}; |
| 473 |
}; |
| 474 |
}; |
| 475 |
|
| 476 |
pl-thermal { |
| 477 |
polling-delay = <10000>; |
| 478 |
thermal-sensors = <&tsens_pl>; |
| 479 |
|
| 480 |
trips { |
| 481 |
critical { |
| 482 |
temperature = <96500>; |
| 483 |
hysteresis = <3500>; |
| 484 |
type = "critical"; |
| 485 |
}; |
| 486 |
}; |
| 487 |
}; |
| 488 |
}; |
| 489 |
|
| 490 |
amba: axi { |
| 491 |
compatible = "simple-bus"; |
| 492 |
bootph-all; |
| 493 |
#address-cells = <2>; |
| 494 |
#size-cells = <2>; |
| 495 |
ranges; |
| 496 |
|
| 497 |
can0: can@ff060000 { |
| 498 |
compatible = "xlnx,zynq-can-1.0"; |
| 499 |
status = "disabled"; |
| 500 |
clock-names = "can_clk", "pclk"; |
| 501 |
reg = <0x0 0xff060000 0x0 0x1000>; |
| 502 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 503 |
interrupt-parent = <&gic>; |
| 504 |
tx-fifo-depth = <0x40>; |
| 505 |
rx-fifo-depth = <0x40>; |
| 506 |
resets = <&zynqmp_reset ZYNQMP_RESET_CAN0>; |
| 507 |
power-domains = <&zynqmp_firmware PD_CAN_0>; |
| 508 |
}; |
| 509 |
|
| 510 |
can1: can@ff070000 { |
| 511 |
compatible = "xlnx,zynq-can-1.0"; |
| 512 |
status = "disabled"; |
| 513 |
clock-names = "can_clk", "pclk"; |
| 514 |
reg = <0x0 0xff070000 0x0 0x1000>; |
| 515 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 516 |
interrupt-parent = <&gic>; |
| 517 |
tx-fifo-depth = <0x40>; |
| 518 |
rx-fifo-depth = <0x40>; |
| 519 |
resets = <&zynqmp_reset ZYNQMP_RESET_CAN1>; |
| 520 |
power-domains = <&zynqmp_firmware PD_CAN_1>; |
| 521 |
}; |
| 522 |
|
| 523 |
cci: cci@fd6e0000 { |
| 524 |
compatible = "arm,cci-400"; |
| 525 |
status = "disabled"; |
| 526 |
reg = <0x0 0xfd6e0000 0x0 0x9000>; |
| 527 |
ranges = <0x0 0x0 0xfd6e0000 0x10000>; |
| 528 |
#address-cells = <1>; |
| 529 |
#size-cells = <1>; |
| 530 |
|
| 531 |
pmu@9000 { |
| 532 |
compatible = "arm,cci-400-pmu,r1"; |
| 533 |
reg = <0x9000 0x5000>; |
| 534 |
interrupt-parent = <&gic>; |
| 535 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 536 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 537 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 538 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 539 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| 540 |
}; |
| 541 |
}; |
| 542 |
|
| 543 |
cpu0_debug: debug@fec10000 { |
| 544 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 545 |
reg = <0x0 0xfec10000 0x0 0x1000>; |
| 546 |
clock-names = "apb_pclk"; |
| 547 |
cpu = <&cpu0>; |
| 548 |
status = "disabled"; |
| 549 |
}; |
| 550 |
|
| 551 |
cpu1_debug: debug@fed10000 { |
| 552 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 553 |
reg = <0x0 0xfed10000 0x0 0x1000>; |
| 554 |
clock-names = "apb_pclk"; |
| 555 |
cpu = <&cpu1>; |
| 556 |
status = "disabled"; |
| 557 |
}; |
| 558 |
|
| 559 |
cpu2_debug: debug@fee10000 { |
| 560 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 561 |
reg = <0x0 0xfee10000 0x0 0x1000>; |
| 562 |
clock-names = "apb_pclk"; |
| 563 |
cpu = <&cpu2>; |
| 564 |
status = "disabled"; |
| 565 |
}; |
| 566 |
|
| 567 |
cpu3_debug: debug@fef10000 { |
| 568 |
compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| 569 |
reg = <0x0 0xfef10000 0x0 0x1000>; |
| 570 |
clock-names = "apb_pclk"; |
| 571 |
cpu = <&cpu3>; |
| 572 |
status = "disabled"; |
| 573 |
}; |
| 574 |
|
| 575 |
/* GDMA */ |
| 576 |
fpd_dma_chan1: dma-controller@fd500000 { |
| 577 |
status = "disabled"; |
| 578 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 579 |
reg = <0x0 0xfd500000 0x0 0x1000>; |
| 580 |
interrupt-parent = <&gic>; |
| 581 |
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| 582 |
clock-names = "clk_main", "clk_apb"; |
| 583 |
#dma-cells = <1>; |
| 584 |
xlnx,bus-width = <128>; |
| 585 |
/* iommus = <&smmu 0x14e8>; */ |
| 586 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 587 |
}; |
| 588 |
|
| 589 |
fpd_dma_chan2: dma-controller@fd510000 { |
| 590 |
status = "disabled"; |
| 591 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 592 |
reg = <0x0 0xfd510000 0x0 0x1000>; |
| 593 |
interrupt-parent = <&gic>; |
| 594 |
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| 595 |
clock-names = "clk_main", "clk_apb"; |
| 596 |
#dma-cells = <1>; |
| 597 |
xlnx,bus-width = <128>; |
| 598 |
/* iommus = <&smmu 0x14e9>; */ |
| 599 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 600 |
}; |
| 601 |
|
| 602 |
fpd_dma_chan3: dma-controller@fd520000 { |
| 603 |
status = "disabled"; |
| 604 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 605 |
reg = <0x0 0xfd520000 0x0 0x1000>; |
| 606 |
interrupt-parent = <&gic>; |
| 607 |
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| 608 |
clock-names = "clk_main", "clk_apb"; |
| 609 |
#dma-cells = <1>; |
| 610 |
xlnx,bus-width = <128>; |
| 611 |
/* iommus = <&smmu 0x14ea>; */ |
| 612 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 613 |
}; |
| 614 |
|
| 615 |
fpd_dma_chan4: dma-controller@fd530000 { |
| 616 |
status = "disabled"; |
| 617 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 618 |
reg = <0x0 0xfd530000 0x0 0x1000>; |
| 619 |
interrupt-parent = <&gic>; |
| 620 |
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| 621 |
clock-names = "clk_main", "clk_apb"; |
| 622 |
#dma-cells = <1>; |
| 623 |
xlnx,bus-width = <128>; |
| 624 |
/* iommus = <&smmu 0x14eb>; */ |
| 625 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 626 |
}; |
| 627 |
|
| 628 |
fpd_dma_chan5: dma-controller@fd540000 { |
| 629 |
status = "disabled"; |
| 630 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 631 |
reg = <0x0 0xfd540000 0x0 0x1000>; |
| 632 |
interrupt-parent = <&gic>; |
| 633 |
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; |
| 634 |
clock-names = "clk_main", "clk_apb"; |
| 635 |
#dma-cells = <1>; |
| 636 |
xlnx,bus-width = <128>; |
| 637 |
/* iommus = <&smmu 0x14ec>; */ |
| 638 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 639 |
}; |
| 640 |
|
| 641 |
fpd_dma_chan6: dma-controller@fd550000 { |
| 642 |
status = "disabled"; |
| 643 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 644 |
reg = <0x0 0xfd550000 0x0 0x1000>; |
| 645 |
interrupt-parent = <&gic>; |
| 646 |
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| 647 |
clock-names = "clk_main", "clk_apb"; |
| 648 |
#dma-cells = <1>; |
| 649 |
xlnx,bus-width = <128>; |
| 650 |
/* iommus = <&smmu 0x14ed>; */ |
| 651 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 652 |
}; |
| 653 |
|
| 654 |
fpd_dma_chan7: dma-controller@fd560000 { |
| 655 |
status = "disabled"; |
| 656 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 657 |
reg = <0x0 0xfd560000 0x0 0x1000>; |
| 658 |
interrupt-parent = <&gic>; |
| 659 |
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; |
| 660 |
clock-names = "clk_main", "clk_apb"; |
| 661 |
#dma-cells = <1>; |
| 662 |
xlnx,bus-width = <128>; |
| 663 |
/* iommus = <&smmu 0x14ee>; */ |
| 664 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 665 |
}; |
| 666 |
|
| 667 |
fpd_dma_chan8: dma-controller@fd570000 { |
| 668 |
status = "disabled"; |
| 669 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 670 |
reg = <0x0 0xfd570000 0x0 0x1000>; |
| 671 |
interrupt-parent = <&gic>; |
| 672 |
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| 673 |
clock-names = "clk_main", "clk_apb"; |
| 674 |
#dma-cells = <1>; |
| 675 |
xlnx,bus-width = <128>; |
| 676 |
/* iommus = <&smmu 0x14ef>; */ |
| 677 |
power-domains = <&zynqmp_firmware PD_GDMA>; |
| 678 |
}; |
| 679 |
|
| 680 |
gic: interrupt-controller@f9010000 { |
| 681 |
compatible = "arm,gic-400"; |
| 682 |
#interrupt-cells = <3>; |
| 683 |
reg = <0x0 0xf9010000 0x0 0x10000>, |
| 684 |
<0x0 0xf9020000 0x0 0x20000>, |
| 685 |
<0x0 0xf9040000 0x0 0x20000>, |
| 686 |
<0x0 0xf9060000 0x0 0x20000>; |
| 687 |
interrupt-controller; |
| 688 |
interrupt-parent = <&gic>; |
| 689 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 690 |
}; |
| 691 |
|
| 692 |
gpu: gpu@fd4b0000 { |
| 693 |
status = "disabled"; |
| 694 |
compatible = "xlnx,zynqmp-mali", "arm,mali-400"; |
| 695 |
reg = <0x0 0xfd4b0000 0x0 0x10000>; |
| 696 |
interrupt-parent = <&gic>; |
| 697 |
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 698 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 699 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 700 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 701 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 702 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| 703 |
interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1"; |
| 704 |
clock-names = "bus", "core"; |
| 705 |
power-domains = <&zynqmp_firmware PD_GPU>; |
| 706 |
}; |
| 707 |
|
| 708 |
/* LPDDMA default allows only secured access. inorder to enable |
| 709 |
* These dma channels, Users should ensure that these dma |
| 710 |
* Channels are allowed for non secure access. |
| 711 |
*/ |
| 712 |
lpd_dma_chan1: dma-controller@ffa80000 { |
| 713 |
status = "disabled"; |
| 714 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 715 |
reg = <0x0 0xffa80000 0x0 0x1000>; |
| 716 |
interrupt-parent = <&gic>; |
| 717 |
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 718 |
clock-names = "clk_main", "clk_apb"; |
| 719 |
#dma-cells = <1>; |
| 720 |
xlnx,bus-width = <64>; |
| 721 |
/* iommus = <&smmu 0x868>; */ |
| 722 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 723 |
}; |
| 724 |
|
| 725 |
lpd_dma_chan2: dma-controller@ffa90000 { |
| 726 |
status = "disabled"; |
| 727 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 728 |
reg = <0x0 0xffa90000 0x0 0x1000>; |
| 729 |
interrupt-parent = <&gic>; |
| 730 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 731 |
clock-names = "clk_main", "clk_apb"; |
| 732 |
#dma-cells = <1>; |
| 733 |
xlnx,bus-width = <64>; |
| 734 |
/* iommus = <&smmu 0x869>; */ |
| 735 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 736 |
}; |
| 737 |
|
| 738 |
lpd_dma_chan3: dma-controller@ffaa0000 { |
| 739 |
status = "disabled"; |
| 740 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 741 |
reg = <0x0 0xffaa0000 0x0 0x1000>; |
| 742 |
interrupt-parent = <&gic>; |
| 743 |
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 744 |
clock-names = "clk_main", "clk_apb"; |
| 745 |
#dma-cells = <1>; |
| 746 |
xlnx,bus-width = <64>; |
| 747 |
/* iommus = <&smmu 0x86a>; */ |
| 748 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 749 |
}; |
| 750 |
|
| 751 |
lpd_dma_chan4: dma-controller@ffab0000 { |
| 752 |
status = "disabled"; |
| 753 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 754 |
reg = <0x0 0xffab0000 0x0 0x1000>; |
| 755 |
interrupt-parent = <&gic>; |
| 756 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 757 |
clock-names = "clk_main", "clk_apb"; |
| 758 |
#dma-cells = <1>; |
| 759 |
xlnx,bus-width = <64>; |
| 760 |
/* iommus = <&smmu 0x86b>; */ |
| 761 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 762 |
}; |
| 763 |
|
| 764 |
lpd_dma_chan5: dma-controller@ffac0000 { |
| 765 |
status = "disabled"; |
| 766 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 767 |
reg = <0x0 0xffac0000 0x0 0x1000>; |
| 768 |
interrupt-parent = <&gic>; |
| 769 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 770 |
clock-names = "clk_main", "clk_apb"; |
| 771 |
#dma-cells = <1>; |
| 772 |
xlnx,bus-width = <64>; |
| 773 |
/* iommus = <&smmu 0x86c>; */ |
| 774 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 775 |
}; |
| 776 |
|
| 777 |
lpd_dma_chan6: dma-controller@ffad0000 { |
| 778 |
status = "disabled"; |
| 779 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 780 |
reg = <0x0 0xffad0000 0x0 0x1000>; |
| 781 |
interrupt-parent = <&gic>; |
| 782 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 783 |
clock-names = "clk_main", "clk_apb"; |
| 784 |
#dma-cells = <1>; |
| 785 |
xlnx,bus-width = <64>; |
| 786 |
/* iommus = <&smmu 0x86d>; */ |
| 787 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 788 |
}; |
| 789 |
|
| 790 |
lpd_dma_chan7: dma-controller@ffae0000 { |
| 791 |
status = "disabled"; |
| 792 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 793 |
reg = <0x0 0xffae0000 0x0 0x1000>; |
| 794 |
interrupt-parent = <&gic>; |
| 795 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 796 |
clock-names = "clk_main", "clk_apb"; |
| 797 |
#dma-cells = <1>; |
| 798 |
xlnx,bus-width = <64>; |
| 799 |
/* iommus = <&smmu 0x86e>; */ |
| 800 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 801 |
}; |
| 802 |
|
| 803 |
lpd_dma_chan8: dma-controller@ffaf0000 { |
| 804 |
status = "disabled"; |
| 805 |
compatible = "xlnx,zynqmp-dma-1.0"; |
| 806 |
reg = <0x0 0xffaf0000 0x0 0x1000>; |
| 807 |
interrupt-parent = <&gic>; |
| 808 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 809 |
clock-names = "clk_main", "clk_apb"; |
| 810 |
#dma-cells = <1>; |
| 811 |
xlnx,bus-width = <64>; |
| 812 |
/* iommus = <&smmu 0x86f>; */ |
| 813 |
power-domains = <&zynqmp_firmware PD_ADMA>; |
| 814 |
}; |
| 815 |
|
| 816 |
mc: memory-controller@fd070000 { |
| 817 |
compatible = "xlnx,zynqmp-ddrc-2.40a"; |
| 818 |
reg = <0x0 0xfd070000 0x0 0x30000>; |
| 819 |
interrupt-parent = <&gic>; |
| 820 |
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| 821 |
}; |
| 822 |
|
| 823 |
nand0: nand-controller@ff100000 { |
| 824 |
compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10"; |
| 825 |
status = "disabled"; |
| 826 |
reg = <0x0 0xff100000 0x0 0x1000>; |
| 827 |
clock-names = "controller", "bus"; |
| 828 |
interrupt-parent = <&gic>; |
| 829 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 830 |
#address-cells = <1>; |
| 831 |
#size-cells = <0>; |
| 832 |
/* iommus = <&smmu 0x872>; */ |
| 833 |
power-domains = <&zynqmp_firmware PD_NAND>; |
| 834 |
}; |
| 835 |
|
| 836 |
gem0: ethernet@ff0b0000 { |
| 837 |
compatible = "xlnx,zynqmp-gem", "cdns,gem"; |
| 838 |
status = "disabled"; |
| 839 |
interrupt-parent = <&gic>; |
| 840 |
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| 841 |
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| 842 |
reg = <0x0 0xff0b0000 0x0 0x1000>; |
| 843 |
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; |
| 844 |
/* iommus = <&smmu 0x874>; */ |
| 845 |
power-domains = <&zynqmp_firmware PD_ETH_0>; |
| 846 |
resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; |
| 847 |
reset-names = "gem0_rst"; |
| 848 |
}; |
| 849 |
|
| 850 |
gem1: ethernet@ff0c0000 { |
| 851 |
compatible = "xlnx,zynqmp-gem", "cdns,gem"; |
| 852 |
status = "disabled"; |
| 853 |
interrupt-parent = <&gic>; |
| 854 |
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 855 |
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| 856 |
reg = <0x0 0xff0c0000 0x0 0x1000>; |
| 857 |
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; |
| 858 |
/* iommus = <&smmu 0x875>; */ |
| 859 |
power-domains = <&zynqmp_firmware PD_ETH_1>; |
| 860 |
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; |
| 861 |
reset-names = "gem1_rst"; |
| 862 |
}; |
| 863 |
|
| 864 |
gem2: ethernet@ff0d0000 { |
| 865 |
compatible = "xlnx,zynqmp-gem", "cdns,gem"; |
| 866 |
status = "disabled"; |
| 867 |
interrupt-parent = <&gic>; |
| 868 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, |
| 869 |
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 870 |
reg = <0x0 0xff0d0000 0x0 0x1000>; |
| 871 |
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; |
| 872 |
/* iommus = <&smmu 0x876>; */ |
| 873 |
power-domains = <&zynqmp_firmware PD_ETH_2>; |
| 874 |
resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; |
| 875 |
reset-names = "gem2_rst"; |
| 876 |
}; |
| 877 |
|
| 878 |
gem3: ethernet@ff0e0000 { |
| 879 |
compatible = "xlnx,zynqmp-gem", "cdns,gem"; |
| 880 |
status = "disabled"; |
| 881 |
interrupt-parent = <&gic>; |
| 882 |
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, |
| 883 |
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 884 |
reg = <0x0 0xff0e0000 0x0 0x1000>; |
| 885 |
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; |
| 886 |
/* iommus = <&smmu 0x877>; */ |
| 887 |
power-domains = <&zynqmp_firmware PD_ETH_3>; |
| 888 |
resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; |
| 889 |
reset-names = "gem3_rst"; |
| 890 |
}; |
| 891 |
|
| 892 |
gpio: gpio@ff0a0000 { |
| 893 |
compatible = "xlnx,zynqmp-gpio-1.0"; |
| 894 |
status = "disabled"; |
| 895 |
#gpio-cells = <0x2>; |
| 896 |
gpio-controller; |
| 897 |
interrupt-parent = <&gic>; |
| 898 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 899 |
interrupt-controller; |
| 900 |
#interrupt-cells = <2>; |
| 901 |
reg = <0x0 0xff0a0000 0x0 0x1000>; |
| 902 |
power-domains = <&zynqmp_firmware PD_GPIO>; |
| 903 |
}; |
| 904 |
|
| 905 |
i2c0: i2c@ff020000 { |
| 906 |
compatible = "cdns,i2c-r1p14"; |
| 907 |
status = "disabled"; |
| 908 |
interrupt-parent = <&gic>; |
| 909 |
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 910 |
clock-frequency = <400000>; |
| 911 |
reg = <0x0 0xff020000 0x0 0x1000>; |
| 912 |
#address-cells = <1>; |
| 913 |
#size-cells = <0>; |
| 914 |
power-domains = <&zynqmp_firmware PD_I2C_0>; |
| 915 |
}; |
| 916 |
|
| 917 |
i2c1: i2c@ff030000 { |
| 918 |
compatible = "cdns,i2c-r1p14"; |
| 919 |
status = "disabled"; |
| 920 |
interrupt-parent = <&gic>; |
| 921 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 922 |
clock-frequency = <400000>; |
| 923 |
reg = <0x0 0xff030000 0x0 0x1000>; |
| 924 |
#address-cells = <1>; |
| 925 |
#size-cells = <0>; |
| 926 |
power-domains = <&zynqmp_firmware PD_I2C_1>; |
| 927 |
}; |
| 928 |
|
| 929 |
ocm: memory-controller@ff960000 { |
| 930 |
compatible = "xlnx,zynqmp-ocmc-1.0"; |
| 931 |
reg = <0x0 0xff960000 0x0 0x1000>; |
| 932 |
interrupt-parent = <&gic>; |
| 933 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 934 |
}; |
| 935 |
|
| 936 |
pcie: pcie@fd0e0000 { |
| 937 |
compatible = "xlnx,nwl-pcie-2.11"; |
| 938 |
status = "disabled"; |
| 939 |
#address-cells = <3>; |
| 940 |
#size-cells = <2>; |
| 941 |
#interrupt-cells = <1>; |
| 942 |
msi-controller; |
| 943 |
device_type = "pci"; |
| 944 |
interrupt-parent = <&gic>; |
| 945 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 946 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| 947 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| 948 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, /* MSI_1 [63...32] */ |
| 949 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; /* MSI_0 [31...0] */ |
| 950 |
interrupt-names = "misc", "dummy", "intx", |
| 951 |
"msi1", "msi0"; |
| 952 |
msi-parent = <&pcie>; |
| 953 |
reg = <0x0 0xfd0e0000 0x0 0x1000>, |
| 954 |
<0x0 0xfd480000 0x0 0x1000>, |
| 955 |
<0x80 0x00000000 0x0 0x10000000>; |
| 956 |
reg-names = "breg", "pcireg", "cfg"; |
| 957 |
ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */ |
| 958 |
<0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ |
| 959 |
bus-range = <0x00 0xff>; |
| 960 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 961 |
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, |
| 962 |
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>, |
| 963 |
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>, |
| 964 |
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>; |
| 965 |
/* iommus = <&smmu 0x4d0>; */ |
| 966 |
power-domains = <&zynqmp_firmware PD_PCIE>; |
| 967 |
pcie_intc: legacy-interrupt-controller { |
| 968 |
interrupt-controller; |
| 969 |
#address-cells = <0>; |
| 970 |
#interrupt-cells = <1>; |
| 971 |
}; |
| 972 |
}; |
| 973 |
|
| 974 |
qspi: spi@ff0f0000 { |
| 975 |
bootph-all; |
| 976 |
compatible = "xlnx,zynqmp-qspi-1.0"; |
| 977 |
status = "disabled"; |
| 978 |
clock-names = "ref_clk", "pclk"; |
| 979 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 980 |
interrupt-parent = <&gic>; |
| 981 |
num-cs = <1>; |
| 982 |
reg = <0x0 0xff0f0000 0x0 0x1000>, |
| 983 |
<0x0 0xc0000000 0x0 0x8000000>; |
| 984 |
#address-cells = <1>; |
| 985 |
#size-cells = <0>; |
| 986 |
/* iommus = <&smmu 0x873>; */ |
| 987 |
power-domains = <&zynqmp_firmware PD_QSPI>; |
| 988 |
}; |
| 989 |
|
| 990 |
psgtr: phy@fd400000 { |
| 991 |
compatible = "xlnx,zynqmp-psgtr-v1.1"; |
| 992 |
status = "disabled"; |
| 993 |
reg = <0x0 0xfd400000 0x0 0x40000>, |
| 994 |
<0x0 0xfd3d0000 0x0 0x1000>; |
| 995 |
reg-names = "serdes", "siou"; |
| 996 |
#phy-cells = <4>; |
| 997 |
}; |
| 998 |
|
| 999 |
rtc: rtc@ffa60000 { |
| 1000 |
compatible = "xlnx,zynqmp-rtc"; |
| 1001 |
status = "disabled"; |
| 1002 |
reg = <0x0 0xffa60000 0x0 0x100>; |
| 1003 |
interrupt-parent = <&gic>; |
| 1004 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| 1005 |
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 1006 |
interrupt-names = "alarm", "sec"; |
| 1007 |
calibration = <0x7FFF>; |
| 1008 |
}; |
| 1009 |
|
| 1010 |
sata: ahci@fd0c0000 { |
| 1011 |
compatible = "ceva,ahci-1v84"; |
| 1012 |
status = "disabled"; |
| 1013 |
reg = <0x0 0xfd0c0000 0x0 0x2000>; |
| 1014 |
interrupt-parent = <&gic>; |
| 1015 |
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| 1016 |
power-domains = <&zynqmp_firmware PD_SATA>; |
| 1017 |
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; |
| 1018 |
/* iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; */ |
| 1019 |
}; |
| 1020 |
|
| 1021 |
sdhci0: mmc@ff160000 { |
| 1022 |
bootph-all; |
| 1023 |
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; |
| 1024 |
status = "disabled"; |
| 1025 |
interrupt-parent = <&gic>; |
| 1026 |
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 1027 |
reg = <0x0 0xff160000 0x0 0x1000>; |
| 1028 |
clock-names = "clk_xin", "clk_ahb"; |
| 1029 |
/* iommus = <&smmu 0x870>; */ |
| 1030 |
#clock-cells = <1>; |
| 1031 |
clock-output-names = "clk_out_sd0", "clk_in_sd0"; |
| 1032 |
power-domains = <&zynqmp_firmware PD_SD_0>; |
| 1033 |
resets = <&zynqmp_reset ZYNQMP_RESET_SDIO0>; |
| 1034 |
}; |
| 1035 |
|
| 1036 |
sdhci1: mmc@ff170000 { |
| 1037 |
bootph-all; |
| 1038 |
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; |
| 1039 |
status = "disabled"; |
| 1040 |
interrupt-parent = <&gic>; |
| 1041 |
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 1042 |
reg = <0x0 0xff170000 0x0 0x1000>; |
| 1043 |
clock-names = "clk_xin", "clk_ahb"; |
| 1044 |
/* iommus = <&smmu 0x871>; */ |
| 1045 |
#clock-cells = <1>; |
| 1046 |
clock-output-names = "clk_out_sd1", "clk_in_sd1"; |
| 1047 |
power-domains = <&zynqmp_firmware PD_SD_1>; |
| 1048 |
resets = <&zynqmp_reset ZYNQMP_RESET_SDIO1>; |
| 1049 |
}; |
| 1050 |
|
| 1051 |
smmu: iommu@fd800000 { |
| 1052 |
compatible = "arm,mmu-500"; |
| 1053 |
reg = <0x0 0xfd800000 0x0 0x20000>; |
| 1054 |
#iommu-cells = <1>; |
| 1055 |
status = "disabled"; |
| 1056 |
#global-interrupts = <1>; |
| 1057 |
interrupt-parent = <&gic>; |
| 1058 |
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1059 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1060 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1061 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1062 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1063 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1064 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1065 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1066 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1067 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1068 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1069 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1070 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1071 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1072 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1073 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| 1074 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 1075 |
}; |
| 1076 |
|
| 1077 |
spi0: spi@ff040000 { |
| 1078 |
compatible = "xlnx,zynqmp-spi-r1p6", "cdns,spi-r1p6"; |
| 1079 |
status = "disabled"; |
| 1080 |
interrupt-parent = <&gic>; |
| 1081 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 1082 |
reg = <0x0 0xff040000 0x0 0x1000>; |
| 1083 |
clock-names = "ref_clk", "pclk"; |
| 1084 |
#address-cells = <1>; |
| 1085 |
#size-cells = <0>; |
| 1086 |
power-domains = <&zynqmp_firmware PD_SPI_0>; |
| 1087 |
}; |
| 1088 |
|
| 1089 |
spi1: spi@ff050000 { |
| 1090 |
compatible = "xlnx,zynqmp-spi-r1p6", "cdns,spi-r1p6"; |
| 1091 |
status = "disabled"; |
| 1092 |
interrupt-parent = <&gic>; |
| 1093 |
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 1094 |
reg = <0x0 0xff050000 0x0 0x1000>; |
| 1095 |
clock-names = "ref_clk", "pclk"; |
| 1096 |
#address-cells = <1>; |
| 1097 |
#size-cells = <0>; |
| 1098 |
power-domains = <&zynqmp_firmware PD_SPI_1>; |
| 1099 |
}; |
| 1100 |
|
| 1101 |
ttc0: timer@ff110000 { |
| 1102 |
compatible = "cdns,ttc"; |
| 1103 |
status = "disabled"; |
| 1104 |
interrupt-parent = <&gic>; |
| 1105 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, |
| 1106 |
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, |
| 1107 |
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 1108 |
reg = <0x0 0xff110000 0x0 0x1000>; |
| 1109 |
timer-width = <32>; |
| 1110 |
power-domains = <&zynqmp_firmware PD_TTC_0>; |
| 1111 |
}; |
| 1112 |
|
| 1113 |
ttc1: timer@ff120000 { |
| 1114 |
compatible = "cdns,ttc"; |
| 1115 |
status = "disabled"; |
| 1116 |
interrupt-parent = <&gic>; |
| 1117 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, |
| 1118 |
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| 1119 |
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 1120 |
reg = <0x0 0xff120000 0x0 0x1000>; |
| 1121 |
timer-width = <32>; |
| 1122 |
power-domains = <&zynqmp_firmware PD_TTC_1>; |
| 1123 |
}; |
| 1124 |
|
| 1125 |
ttc2: timer@ff130000 { |
| 1126 |
compatible = "cdns,ttc"; |
| 1127 |
status = "disabled"; |
| 1128 |
interrupt-parent = <&gic>; |
| 1129 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, |
| 1130 |
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, |
| 1131 |
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 1132 |
reg = <0x0 0xff130000 0x0 0x1000>; |
| 1133 |
timer-width = <32>; |
| 1134 |
power-domains = <&zynqmp_firmware PD_TTC_2>; |
| 1135 |
}; |
| 1136 |
|
| 1137 |
ttc3: timer@ff140000 { |
| 1138 |
compatible = "cdns,ttc"; |
| 1139 |
status = "disabled"; |
| 1140 |
interrupt-parent = <&gic>; |
| 1141 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, |
| 1142 |
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, |
| 1143 |
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 1144 |
reg = <0x0 0xff140000 0x0 0x1000>; |
| 1145 |
timer-width = <32>; |
| 1146 |
power-domains = <&zynqmp_firmware PD_TTC_3>; |
| 1147 |
}; |
| 1148 |
|
| 1149 |
uart0: serial@ff000000 { |
| 1150 |
bootph-all; |
| 1151 |
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; |
| 1152 |
status = "disabled"; |
| 1153 |
interrupt-parent = <&gic>; |
| 1154 |
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| 1155 |
reg = <0x0 0xff000000 0x0 0x1000>; |
| 1156 |
clock-names = "uart_clk", "pclk"; |
| 1157 |
power-domains = <&zynqmp_firmware PD_UART_0>; |
| 1158 |
resets = <&zynqmp_reset ZYNQMP_RESET_UART0>; |
| 1159 |
}; |
| 1160 |
|
| 1161 |
uart1: serial@ff010000 { |
| 1162 |
bootph-all; |
| 1163 |
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; |
| 1164 |
status = "disabled"; |
| 1165 |
interrupt-parent = <&gic>; |
| 1166 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 1167 |
reg = <0x0 0xff010000 0x0 0x1000>; |
| 1168 |
clock-names = "uart_clk", "pclk"; |
| 1169 |
power-domains = <&zynqmp_firmware PD_UART_1>; |
| 1170 |
resets = <&zynqmp_reset ZYNQMP_RESET_UART1>; |
| 1171 |
}; |
| 1172 |
|
| 1173 |
usb0: usb@ff9d0000 { |
| 1174 |
#address-cells = <2>; |
| 1175 |
#size-cells = <2>; |
| 1176 |
status = "disabled"; |
| 1177 |
compatible = "xlnx,zynqmp-dwc3"; |
| 1178 |
reg = <0x0 0xff9d0000 0x0 0x100>; |
| 1179 |
clock-names = "bus_clk", "ref_clk"; |
| 1180 |
power-domains = <&zynqmp_firmware PD_USB_0>; |
| 1181 |
resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>, |
| 1182 |
<&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>, |
| 1183 |
<&zynqmp_reset ZYNQMP_RESET_USB0_APB>; |
| 1184 |
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; |
| 1185 |
reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>; |
| 1186 |
ranges; |
| 1187 |
|
| 1188 |
dwc3_0: usb@fe200000 { |
| 1189 |
compatible = "snps,dwc3"; |
| 1190 |
status = "disabled"; |
| 1191 |
reg = <0x0 0xfe200000 0x0 0x40000>; |
| 1192 |
interrupt-parent = <&gic>; |
| 1193 |
interrupt-names = "host", "peripheral", "otg", "wakeup"; |
| 1194 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| 1195 |
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| 1196 |
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| 1197 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 1198 |
clock-names = "ref"; |
| 1199 |
/* iommus = <&smmu 0x860>; */ |
| 1200 |
snps,quirk-frame-length-adjustment = <0x20>; |
| 1201 |
snps,resume-hs-terminations; |
| 1202 |
/* dma-coherent; */ |
| 1203 |
}; |
| 1204 |
}; |
| 1205 |
|
| 1206 |
usb1: usb@ff9e0000 { |
| 1207 |
#address-cells = <2>; |
| 1208 |
#size-cells = <2>; |
| 1209 |
status = "disabled"; |
| 1210 |
compatible = "xlnx,zynqmp-dwc3"; |
| 1211 |
reg = <0x0 0xff9e0000 0x0 0x100>; |
| 1212 |
clock-names = "bus_clk", "ref_clk"; |
| 1213 |
power-domains = <&zynqmp_firmware PD_USB_1>; |
| 1214 |
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, |
| 1215 |
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, |
| 1216 |
<&zynqmp_reset ZYNQMP_RESET_USB1_APB>; |
| 1217 |
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; |
| 1218 |
ranges; |
| 1219 |
|
| 1220 |
dwc3_1: usb@fe300000 { |
| 1221 |
compatible = "snps,dwc3"; |
| 1222 |
status = "disabled"; |
| 1223 |
reg = <0x0 0xfe300000 0x0 0x40000>; |
| 1224 |
interrupt-parent = <&gic>; |
| 1225 |
interrupt-names = "host", "peripheral", "otg", "wakeup"; |
| 1226 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 1227 |
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 1228 |
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 1229 |
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 1230 |
clock-names = "ref"; |
| 1231 |
/* iommus = <&smmu 0x861>; */ |
| 1232 |
snps,quirk-frame-length-adjustment = <0x20>; |
| 1233 |
snps,resume-hs-terminations; |
| 1234 |
/* dma-coherent; */ |
| 1235 |
}; |
| 1236 |
}; |
| 1237 |
|
| 1238 |
watchdog0: watchdog@fd4d0000 { |
| 1239 |
compatible = "cdns,wdt-r1p2"; |
| 1240 |
status = "disabled"; |
| 1241 |
interrupt-parent = <&gic>; |
| 1242 |
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; |
| 1243 |
reg = <0x0 0xfd4d0000 0x0 0x1000>; |
| 1244 |
timeout-sec = <60>; |
| 1245 |
reset-on-timeout; |
| 1246 |
}; |
| 1247 |
|
| 1248 |
lpd_watchdog: watchdog@ff150000 { |
| 1249 |
compatible = "cdns,wdt-r1p2"; |
| 1250 |
status = "disabled"; |
| 1251 |
interrupt-parent = <&gic>; |
| 1252 |
interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; |
| 1253 |
reg = <0x0 0xff150000 0x0 0x1000>; |
| 1254 |
timeout-sec = <10>; |
| 1255 |
}; |
| 1256 |
|
| 1257 |
xilinx_ams: ams@ffa50000 { |
| 1258 |
compatible = "xlnx,zynqmp-ams"; |
| 1259 |
interrupt-parent = <&gic>; |
| 1260 |
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 1261 |
reg = <0x0 0xffa50000 0x0 0x800>; |
| 1262 |
#address-cells = <1>; |
| 1263 |
#size-cells = <1>; |
| 1264 |
#io-channel-cells = <1>; |
| 1265 |
ranges = <0 0 0xffa50800 0x800>; |
| 1266 |
|
| 1267 |
ams_ps: ams-ps@0 { |
| 1268 |
compatible = "xlnx,zynqmp-ams-ps"; |
| 1269 |
status = "disabled"; |
| 1270 |
reg = <0x0 0x400>; |
| 1271 |
}; |
| 1272 |
|
| 1273 |
ams_pl: ams-pl@400 { |
| 1274 |
compatible = "xlnx,zynqmp-ams-pl"; |
| 1275 |
status = "disabled"; |
| 1276 |
reg = <0x400 0x400>; |
| 1277 |
}; |
| 1278 |
}; |
| 1279 |
|
| 1280 |
zynqmp_dpdma: dma-controller@fd4c0000 { |
| 1281 |
compatible = "xlnx,zynqmp-dpdma"; |
| 1282 |
status = "disabled"; |
| 1283 |
reg = <0x0 0xfd4c0000 0x0 0x1000>; |
| 1284 |
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| 1285 |
interrupt-parent = <&gic>; |
| 1286 |
clock-names = "axi_clk"; |
| 1287 |
power-domains = <&zynqmp_firmware PD_DP>; |
| 1288 |
/* iommus = <&smmu 0xce4>; */ |
| 1289 |
#dma-cells = <1>; |
| 1290 |
}; |
| 1291 |
|
| 1292 |
zynqmp_dpsub: display@fd4a0000 { |
| 1293 |
bootph-all; |
| 1294 |
compatible = "xlnx,zynqmp-dpsub-1.7"; |
| 1295 |
status = "disabled"; |
| 1296 |
reg = <0x0 0xfd4a0000 0x0 0x1000>, |
| 1297 |
<0x0 0xfd4aa000 0x0 0x1000>, |
| 1298 |
<0x0 0xfd4ab000 0x0 0x1000>, |
| 1299 |
<0x0 0xfd4ac000 0x0 0x1000>; |
| 1300 |
reg-names = "dp", "blend", "av_buf", "aud"; |
| 1301 |
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| 1302 |
interrupt-parent = <&gic>; |
| 1303 |
/* iommus = <&smmu 0xce3>; */ |
| 1304 |
clock-names = "dp_apb_clk", "dp_aud_clk", |
| 1305 |
"dp_vtc_pixel_clk_in"; |
| 1306 |
power-domains = <&zynqmp_firmware PD_DP>; |
| 1307 |
resets = <&zynqmp_reset ZYNQMP_RESET_DP>; |
| 1308 |
dma-names = "vid0", "vid1", "vid2", "gfx0", |
| 1309 |
"aud0", "aud1"; |
| 1310 |
dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>, |
| 1311 |
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>, |
| 1312 |
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>, |
| 1313 |
<&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>, |
| 1314 |
<&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>, |
| 1315 |
<&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>; |
| 1316 |
|
| 1317 |
ports { |
| 1318 |
#address-cells = <1>; |
| 1319 |
#size-cells = <0>; |
| 1320 |
|
| 1321 |
live_video: port@0 { |
| 1322 |
reg = <0>; |
| 1323 |
}; |
| 1324 |
live_gfx: port@1 { |
| 1325 |
reg = <1>; |
| 1326 |
}; |
| 1327 |
live_audio: port@2 { |
| 1328 |
reg = <2>; |
| 1329 |
}; |
| 1330 |
out_video: port@3 { |
| 1331 |
reg = <3>; |
| 1332 |
}; |
| 1333 |
out_audio: port@4 { |
| 1334 |
reg = <4>; |
| 1335 |
}; |
| 1336 |
out_dp: port@5 { |
| 1337 |
reg = <5>; |
| 1338 |
}; |
| 1339 |
}; |
| 1340 |
}; |
| 1341 |
}; |
| 1342 |
}; |