Debian Codegraph @

scripts/dtc/include-prefixes/arm64/xilinx/zynqmp-zcu111-revA.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * dts file for Xilinx ZynqMP ZCU111
4 *
5 * (C) Copyright 2017 - 2022, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
7 *
8 * Michal Simek <[email protected]>
9 */
10
11 /dts-v1/;
12
13 #include "zynqmp.dtsi"
14 #include "zynqmp-clk-ccf.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
18 #include <dt-bindings/phy/phy.h>
19
20 / {
21 model = "ZynqMP ZCU111 RevA";
22 compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
23
24 aliases {
25 ethernet0 = &gem3;
26 i2c0 = &i2c0;
27 i2c1 = &i2c1;
28 mmc0 = &sdhci1;
29 nvmem0 = &eeprom;
30 rtc0 = &rtc;
31 serial0 = &uart0;
32 serial1 = &dcc;
33 spi0 = &qspi;
34 usb0 = &usb0;
35 };
36
37 chosen {
38 bootargs = "earlycon";
39 stdout-path = "serial0:115200n8";
40 };
41
42 memory@0 {
43 device_type = "memory";
44 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
45 /* Another 4GB connected to PL */
46 };
47
48 gpio-keys {
49 compatible = "gpio-keys";
50 autorepeat;
51 switch-19 {
52 label = "sw19";
53 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
54 linux,code = <KEY_DOWN>;
55 wakeup-source;
56 autorepeat;
57 };
58 };
59
60 leds {
61 compatible = "gpio-leds";
62 heartbeat-led {
63 label = "heartbeat";
64 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
65 linux,default-trigger = "heartbeat";
66 };
67 };
68
69 ina226-u67 {
70 compatible = "iio-hwmon";
71 io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
72 };
73 ina226-u59 {
74 compatible = "iio-hwmon";
75 io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
76 };
77 ina226-u61 {
78 compatible = "iio-hwmon";
79 io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
80 };
81 ina226-u60 {
82 compatible = "iio-hwmon";
83 io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
84 };
85 ina226-u64 {
86 compatible = "iio-hwmon";
87 io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
88 };
89 ina226-u69 {
90 compatible = "iio-hwmon";
91 io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
92 };
93 ina226-u66 {
94 compatible = "iio-hwmon";
95 io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
96 };
97 ina226-u65 {
98 compatible = "iio-hwmon";
99 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
100 };
101 ina226-u63 {
102 compatible = "iio-hwmon";
103 io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
104 };
105 ina226-u3 {
106 compatible = "iio-hwmon";
107 io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
108 };
109 ina226-u71 {
110 compatible = "iio-hwmon";
111 io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
112 };
113 ina226-u77 {
114 compatible = "iio-hwmon";
115 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
116 };
117 ina226-u73 {
118 compatible = "iio-hwmon";
119 io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
120 };
121 ina226-u79 {
122 compatible = "iio-hwmon";
123 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
124 };
125
126 /* 48MHz reference crystal */
127 ref48: ref48M {
128 compatible = "fixed-clock";
129 #clock-cells = <0>;
130 clock-frequency = <48000000>;
131 };
132
133 dpcon {
134 compatible = "dp-connector";
135 label = "P11";
136 type = "full-size";
137
138 port {
139 dpcon_in: endpoint {
140 remote-endpoint = <&dpsub_dp_out>;
141 };
142 };
143 };
144 };
145
146 &dcc {
147 status = "okay";
148 };
149
150 &fpd_dma_chan1 {
151 status = "okay";
152 };
153
154 &fpd_dma_chan2 {
155 status = "okay";
156 };
157
158 &fpd_dma_chan3 {
159 status = "okay";
160 };
161
162 &fpd_dma_chan4 {
163 status = "okay";
164 };
165
166 &fpd_dma_chan5 {
167 status = "okay";
168 };
169
170 &fpd_dma_chan6 {
171 status = "okay";
172 };
173
174 &fpd_dma_chan7 {
175 status = "okay";
176 };
177
178 &fpd_dma_chan8 {
179 status = "okay";
180 };
181
182 &gem3 {
183 status = "okay";
184 phy-handle = <&phy0>;
185 phy-mode = "rgmii-id";
186 pinctrl-names = "default";
187 pinctrl-0 = <&pinctrl_gem3_default>;
188 mdio: mdio {
189 #address-cells = <1>;
190 #size-cells = <0>;
191 phy0: ethernet-phy@c {
192 #phy-cells = <1>;
193 compatible = "ethernet-phy-id2000.a231";
194 reg = <0xc>;
195 ti,rx-internal-delay = <0x8>;
196 ti,tx-internal-delay = <0xa>;
197 ti,fifo-depth = <0x1>;
198 ti,dp83867-rxctrl-strap-quirk;
199 reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>;
200 };
201 };
202 };
203
204 &gpio {
205 status = "okay";
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_gpio_default>;
208 };
209
210 &gpu {
211 status = "okay";
212 };
213
214 &i2c0 {
215 status = "okay";
216 clock-frequency = <400000>;
217 pinctrl-names = "default", "gpio";
218 pinctrl-0 = <&pinctrl_i2c0_default>;
219 pinctrl-1 = <&pinctrl_i2c0_gpio>;
220 scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
221 sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
222
223 tca6416_u22: gpio@20 {
224 compatible = "ti,tca6416";
225 reg = <0x20>;
226 gpio-controller; /* interrupt not connected */
227 #gpio-cells = <2>;
228 /*
229 * IRQ not connected
230 * Lines:
231 * 0 - MAX6643_OT_B
232 * 1 - MAX6643_FANFAIL_B
233 * 2 - MIO26_PMU_INPUT_LS
234 * 4 - SFP_SI5382_INT_ALM
235 * 5 - IIC_MUX_RESET_B
236 * 6 - GEM3_EXP_RESET_B
237 * 10 - FMCP_HSPC_PRSNT_M2C_B
238 * 11 - CLK_SPI_MUX_SEL0
239 * 12 - CLK_SPI_MUX_SEL1
240 * 16 - IRPS5401_ALERT_B
241 * 17 - INA226_PMBUS_ALERT
242 * 3, 7, 13-15 - not connected
243 */
244 };
245
246 i2c-mux@75 { /* u23 */
247 compatible = "nxp,pca9544";
248 #address-cells = <1>;
249 #size-cells = <0>;
250 reg = <0x75>;
251 i2c@0 {
252 #address-cells = <1>;
253 #size-cells = <0>;
254 reg = <0>;
255 /* PS_PMBUS */
256 /* PMBUS_ALERT done via pca9544 */
257 u67: ina226@40 { /* u67 */
258 compatible = "ti,ina226";
259 #io-channel-cells = <1>;
260 label = "ina226-u67";
261 reg = <0x40>;
262 shunt-resistor = <2000>;
263 };
264 u59: ina226@41 { /* u59 */
265 compatible = "ti,ina226";
266 #io-channel-cells = <1>;
267 label = "ina226-u59";
268 reg = <0x41>;
269 shunt-resistor = <5000>;
270 };
271 u61: ina226@42 { /* u61 */
272 compatible = "ti,ina226";
273 #io-channel-cells = <1>;
274 label = "ina226-u61";
275 reg = <0x42>;
276 shunt-resistor = <5000>;
277 };
278 u60: ina226@43 { /* u60 */
279 compatible = "ti,ina226";
280 #io-channel-cells = <1>;
281 label = "ina226-u60";
282 reg = <0x43>;
283 shunt-resistor = <5000>;
284 };
285 u64: ina226@45 { /* u64 */
286 compatible = "ti,ina226";
287 #io-channel-cells = <1>;
288 label = "ina226-u64";
289 reg = <0x45>;
290 shunt-resistor = <5000>;
291 };
292 u69: ina226@46 { /* u69 */
293 compatible = "ti,ina226";
294 #io-channel-cells = <1>;
295 label = "ina226-u69";
296 reg = <0x46>;
297 shunt-resistor = <2000>;
298 };
299 u66: ina226@47 { /* u66 */
300 compatible = "ti,ina226";
301 #io-channel-cells = <1>;
302 label = "ina226-u66";
303 reg = <0x47>;
304 shunt-resistor = <5000>;
305 };
306 u65: ina226@48 { /* u65 */
307 compatible = "ti,ina226";
308 #io-channel-cells = <1>;
309 label = "ina226-u65";
310 reg = <0x48>;
311 shunt-resistor = <5000>;
312 };
313 u63: ina226@49 { /* u63 */
314 compatible = "ti,ina226";
315 #io-channel-cells = <1>;
316 label = "ina226-u63";
317 reg = <0x49>;
318 shunt-resistor = <5000>;
319 };
320 u3: ina226@4a { /* u3 */
321 compatible = "ti,ina226";
322 #io-channel-cells = <1>;
323 label = "ina226-u3";
324 reg = <0x4a>;
325 shunt-resistor = <5000>;
326 };
327 u71: ina226@4b { /* u71 */
328 compatible = "ti,ina226";
329 #io-channel-cells = <1>;
330 label = "ina226-u71";
331 reg = <0x4b>;
332 shunt-resistor = <5000>;
333 };
334 u77: ina226@4c { /* u77 */
335 compatible = "ti,ina226";
336 #io-channel-cells = <1>;
337 label = "ina226-u77";
338 reg = <0x4c>;
339 shunt-resistor = <5000>;
340 };
341 u73: ina226@4d { /* u73 */
342 compatible = "ti,ina226";
343 #io-channel-cells = <1>;
344 label = "ina226-u73";
345 reg = <0x4d>;
346 shunt-resistor = <5000>;
347 };
348 u79: ina226@4e { /* u79 */
349 compatible = "ti,ina226";
350 #io-channel-cells = <1>;
351 label = "ina226-u79";
352 reg = <0x4e>;
353 shunt-resistor = <5000>;
354 };
355 };
356 i2c@1 {
357 #address-cells = <1>;
358 #size-cells = <0>;
359 reg = <1>;
360 /* NC */
361 };
362 i2c@2 {
363 #address-cells = <1>;
364 #size-cells = <0>;
365 reg = <2>;
366 irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
367 compatible = "infineon,irps5401";
368 reg = <0x43>;
369 };
370 irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
371 compatible = "infineon,irps5401";
372 reg = <0x44>;
373 };
374 irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
375 compatible = "infineon,irps5401";
376 reg = <0x45>;
377 };
378 /* u68 IR38064 +0 */
379 /* u70 IR38060 +1 */
380 /* u74 IR38060 +2 */
381 /* u75 IR38060 +6 */
382 /* J19 header too */
383
384 };
385 i2c@3 {
386 #address-cells = <1>;
387 #size-cells = <0>;
388 reg = <3>;
389 /* SYSMON */
390 };
391 };
392 };
393
394 &i2c1 {
395 status = "okay";
396 clock-frequency = <400000>;
397 pinctrl-names = "default", "gpio";
398 pinctrl-0 = <&pinctrl_i2c1_default>;
399 pinctrl-1 = <&pinctrl_i2c1_gpio>;
400 scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
401 sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
402
403 i2c-mux@74 { /* u26 */
404 compatible = "nxp,pca9548";
405 #address-cells = <1>;
406 #size-cells = <0>;
407 reg = <0x74>;
408 i2c@0 {
409 #address-cells = <1>;
410 #size-cells = <0>;
411 reg = <0>;
412 /*
413 * IIC_EEPROM 1kB memory which uses 256B blocks
414 * where every block has different address.
415 * 0 - 256B address 0x54
416 * 256B - 512B address 0x55
417 * 512B - 768B address 0x56
418 * 768B - 1024B address 0x57
419 */
420 eeprom: eeprom@54 { /* u88 */
421 compatible = "atmel,24c08";
422 reg = <0x54>;
423 };
424 };
425 i2c@1 {
426 #address-cells = <1>;
427 #size-cells = <0>;
428 reg = <1>;
429 si5341: clock-generator@36 { /* SI5341 - u46 */
430 compatible = "silabs,si5341";
431 reg = <0x36>;
432 #clock-cells = <2>;
433 #address-cells = <1>;
434 #size-cells = <0>;
435 clocks = <&ref48>;
436 clock-names = "xtal";
437 clock-output-names = "si5341";
438
439 si5341_0: out@0 {
440 /* refclk0 for PS-GT, used for DP */
441 reg = <0>;
442 always-on;
443 };
444 si5341_2: out@2 {
445 /* refclk2 for PS-GT, used for USB3 */
446 reg = <2>;
447 always-on;
448 };
449 si5341_3: out@3 {
450 /* refclk3 for PS-GT, used for SATA */
451 reg = <3>;
452 always-on;
453 };
454 si5341_5: out@5 {
455 /* refclk5 PL CLK100 */
456 reg = <5>;
457 always-on;
458 };
459 si5341_6: out@6 {
460 /* refclk6 PL CLK125 */
461 reg = <6>;
462 always-on;
463 };
464 si5341_9: out@9 {
465 /* refclk9 used for PS_REF_CLK 33.3 MHz */
466 reg = <9>;
467 always-on;
468 };
469 };
470 };
471 i2c@2 {
472 #address-cells = <1>;
473 #size-cells = <0>;
474 reg = <2>;
475 si570_1: clock-generator@5d { /* USER SI570 - u47 */
476 #clock-cells = <0>;
477 compatible = "silabs,si570";
478 reg = <0x5d>;
479 temperature-stability = <50>;
480 factory-fout = <300000000>;
481 clock-frequency = <300000000>;
482 clock-output-names = "si570_user";
483 };
484 };
485 i2c@3 {
486 #address-cells = <1>;
487 #size-cells = <0>;
488 reg = <3>;
489 si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
490 #clock-cells = <0>;
491 compatible = "silabs,si570";
492 reg = <0x5d>;
493 temperature-stability = <50>;
494 factory-fout = <156250000>;
495 clock-frequency = <156250000>;
496 clock-output-names = "si570_mgt";
497 };
498 };
499 i2c@4 {
500 #address-cells = <1>;
501 #size-cells = <0>;
502 reg = <4>;
503 /* SI5382 - u48 */
504 };
505 i2c@5 {
506 #address-cells = <1>;
507 #size-cells = <0>;
508 reg = <5>;
509 sc18is603: spi@2f { /* sc18is602 - u93 */
510 compatible = "nxp,sc18is603";
511 reg = <0x2f>;
512 /* 4 gpios for CS not handled by driver */
513 /*
514 * USB2ANY cable or
515 * LMK04208 - u90 or
516 * LMX2594 - u102 or
517 * LMX2594 - u103 or
518 * LMX2594 - u104
519 */
520 };
521 };
522 i2c@6 {
523 #address-cells = <1>;
524 #size-cells = <0>;
525 reg = <6>;
526 /* FMC connector */
527 };
528 /* 7 NC */
529 };
530
531 i2c-mux@75 {
532 compatible = "nxp,pca9548"; /* u27 */
533 #address-cells = <1>;
534 #size-cells = <0>;
535 reg = <0x75>;
536
537 i2c@0 {
538 #address-cells = <1>;
539 #size-cells = <0>;
540 reg = <0>;
541 /* FMCP_HSPC_IIC */
542 };
543 i2c@1 {
544 #address-cells = <1>;
545 #size-cells = <0>;
546 reg = <1>;
547 /* NC */
548 };
549 i2c@2 {
550 #address-cells = <1>;
551 #size-cells = <0>;
552 reg = <2>;
553 /* SYSMON */
554 };
555 i2c@3 {
556 #address-cells = <1>;
557 #size-cells = <0>;
558 reg = <3>;
559 /* DDR4 SODIMM */
560 };
561 i2c@4 {
562 #address-cells = <1>;
563 #size-cells = <0>;
564 reg = <4>;
565 /* SFP3 */
566 };
567 i2c@5 {
568 #address-cells = <1>;
569 #size-cells = <0>;
570 reg = <5>;
571 /* SFP2 */
572 };
573 i2c@6 {
574 #address-cells = <1>;
575 #size-cells = <0>;
576 reg = <6>;
577 /* SFP1 */
578 };
579 i2c@7 {
580 #address-cells = <1>;
581 #size-cells = <0>;
582 reg = <7>;
583 /* SFP0 */
584 };
585 };
586 };
587
588 &pinctrl0 {
589 status = "okay";
590 pinctrl_i2c0_default: i2c0-default {
591 mux {
592 groups = "i2c0_3_grp";
593 function = "i2c0";
594 };
595
596 conf {
597 groups = "i2c0_3_grp";
598 bias-pull-up;
599 slew-rate = <SLEW_RATE_SLOW>;
600 power-source = <IO_STANDARD_LVCMOS18>;
601 };
602 };
603
604 pinctrl_i2c0_gpio: i2c0-gpio-grp {
605 mux {
606 groups = "gpio0_14_grp", "gpio0_15_grp";
607 function = "gpio0";
608 };
609
610 conf {
611 groups = "gpio0_14_grp", "gpio0_15_grp";
612 slew-rate = <SLEW_RATE_SLOW>;
613 power-source = <IO_STANDARD_LVCMOS18>;
614 };
615 };
616
617 pinctrl_i2c1_default: i2c1-default {
618 mux {
619 groups = "i2c1_4_grp";
620 function = "i2c1";
621 };
622
623 conf {
624 groups = "i2c1_4_grp";
625 bias-pull-up;
626 slew-rate = <SLEW_RATE_SLOW>;
627 power-source = <IO_STANDARD_LVCMOS18>;
628 };
629 };
630
631 pinctrl_i2c1_gpio: i2c1-gpio-grp {
632 mux {
633 groups = "gpio0_16_grp", "gpio0_17_grp";
634 function = "gpio0";
635 };
636
637 conf {
638 groups = "gpio0_16_grp", "gpio0_17_grp";
639 slew-rate = <SLEW_RATE_SLOW>;
640 power-source = <IO_STANDARD_LVCMOS18>;
641 };
642 };
643
644 pinctrl_uart0_default: uart0-default {
645 mux {
646 groups = "uart0_4_grp";
647 function = "uart0";
648 };
649
650 conf {
651 groups = "uart0_4_grp";
652 slew-rate = <SLEW_RATE_SLOW>;
653 power-source = <IO_STANDARD_LVCMOS18>;
654 };
655
656 conf-rx {
657 pins = "MIO18";
658 bias-high-impedance;
659 };
660
661 conf-tx {
662 pins = "MIO19";
663 bias-disable;
664 };
665 };
666
667 pinctrl_usb0_default: usb0-default {
668 mux {
669 groups = "usb0_0_grp";
670 function = "usb0";
671 };
672
673 conf {
674 groups = "usb0_0_grp";
675 power-source = <IO_STANDARD_LVCMOS18>;
676 };
677
678 conf-rx {
679 pins = "MIO52", "MIO53", "MIO55";
680 bias-high-impedance;
681 drive-strength = <12>;
682 slew-rate = <SLEW_RATE_FAST>;
683 };
684
685 conf-tx {
686 pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
687 "MIO60", "MIO61", "MIO62", "MIO63";
688 bias-disable;
689 drive-strength = <4>;
690 slew-rate = <SLEW_RATE_SLOW>;
691 };
692 };
693
694 pinctrl_gem3_default: gem3-default {
695 mux {
696 function = "ethernet3";
697 groups = "ethernet3_0_grp";
698 };
699
700 conf {
701 groups = "ethernet3_0_grp";
702 slew-rate = <SLEW_RATE_SLOW>;
703 power-source = <IO_STANDARD_LVCMOS18>;
704 };
705
706 conf-rx {
707 pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
708 "MIO75";
709 bias-high-impedance;
710 low-power-disable;
711 };
712
713 conf-tx {
714 pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
715 "MIO69";
716 bias-disable;
717 low-power-enable;
718 };
719
720 mux-mdio {
721 function = "mdio3";
722 groups = "mdio3_0_grp";
723 };
724
725 conf-mdio {
726 groups = "mdio3_0_grp";
727 slew-rate = <SLEW_RATE_SLOW>;
728 power-source = <IO_STANDARD_LVCMOS18>;
729 bias-disable;
730 };
731 };
732
733 pinctrl_sdhci1_default: sdhci1-default {
734 mux {
735 groups = "sdio1_0_grp";
736 function = "sdio1";
737 };
738
739 conf {
740 groups = "sdio1_0_grp";
741 slew-rate = <SLEW_RATE_SLOW>;
742 power-source = <IO_STANDARD_LVCMOS18>;
743 bias-disable;
744 };
745
746 mux-cd {
747 groups = "sdio1_cd_0_grp";
748 function = "sdio1_cd";
749 };
750
751 conf-cd {
752 groups = "sdio1_cd_0_grp";
753 bias-high-impedance;
754 bias-pull-up;
755 slew-rate = <SLEW_RATE_SLOW>;
756 power-source = <IO_STANDARD_LVCMOS18>;
757 };
758 };
759
760 pinctrl_gpio_default: gpio-default {
761 mux {
762 function = "gpio0";
763 groups = "gpio0_22_grp", "gpio0_23_grp";
764 };
765
766 conf {
767 groups = "gpio0_22_grp", "gpio0_23_grp";
768 slew-rate = <SLEW_RATE_SLOW>;
769 power-source = <IO_STANDARD_LVCMOS18>;
770 };
771
772 mux-msp {
773 function = "gpio0";
774 groups = "gpio0_13_grp", "gpio0_38_grp";
775 };
776
777 conf-msp {
778 groups = "gpio0_13_grp", "gpio0_38_grp";
779 slew-rate = <SLEW_RATE_SLOW>;
780 power-source = <IO_STANDARD_LVCMOS18>;
781 };
782
783 conf-pull-up {
784 pins = "MIO22";
785 bias-pull-up;
786 };
787
788 conf-pull-none {
789 pins = "MIO13", "MIO23", "MIO38";
790 bias-disable;
791 };
792 };
793 };
794
795 &psgtr {
796 status = "okay";
797 /* nc, dp, usb3, sata */
798 clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>;
799 clock-names = "ref1", "ref2", "ref3";
800 };
801
802 &qspi {
803 status = "okay";
804 flash@0 {
805 compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
806 #address-cells = <1>;
807 #size-cells = <1>;
808 reg = <0x0>;
809 spi-tx-bus-width = <4>;
810 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
811 spi-max-frequency = <108000000>; /* Based on DC1 spec */
812 };
813 };
814
815 &rtc {
816 status = "okay";
817 };
818
819 &sata {
820 status = "okay";
821 /* SATA OOB timing settings */
822 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
823 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
824 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
825 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
826 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
827 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
828 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
829 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
830 phy-names = "sata-phy";
831 phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
832 };
833
834 /* SD1 with level shifter */
835 &sdhci1 {
836 status = "okay";
837 pinctrl-names = "default";
838 pinctrl-0 = <&pinctrl_sdhci1_default>;
839 disable-wp;
840 /*
841 * This property should be removed for supporting UHS mode
842 */
843 no-1-8-v;
844 xlnx,mio-bank = <1>;
845 };
846
847 &uart0 {
848 status = "okay";
849 pinctrl-names = "default";
850 pinctrl-0 = <&pinctrl_uart0_default>;
851 };
852
853 /* ULPI SMSC USB3320 */
854 &usb0 {
855 status = "okay";
856 pinctrl-names = "default";
857 pinctrl-0 = <&pinctrl_usb0_default>;
858 phy-names = "usb3-phy";
859 phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
860 };
861
862 &dwc3_0 {
863 status = "okay";
864 dr_mode = "host";
865 snps,usb3_lpm_capable;
866 maximum-speed = "super-speed";
867 };
868
869 &zynqmp_dpdma {
870 status = "okay";
871 };
872
873 &zynqmp_dpsub {
874 status = "okay";
875 phy-names = "dp-phy0", "dp-phy1";
876 phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
877 <&psgtr 0 PHY_TYPE_DP 1 1>;
878 };
879
880 &out_dp {
881 dpsub_dp_out: endpoint {
882 remote-endpoint = <&dpcon_in>;
883 };
884 };