| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* dts file for Xilinx ZynqMP ZCU106 |
| 4 |
* |
| 5 |
* (C) Copyright 2016 - 2022, Xilinx, Inc. |
| 6 |
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. |
| 7 |
* |
| 8 |
* Michal Simek <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include "zynqmp.dtsi" |
| 14 |
#include "zynqmp-clk-ccf.dtsi" |
| 15 |
#include <dt-bindings/input/input.h> |
| 16 |
#include <dt-bindings/gpio/gpio.h> |
| 17 |
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| 18 |
#include <dt-bindings/phy/phy.h> |
| 19 |
|
| 20 |
/ { |
| 21 |
model = "ZynqMP ZCU106 RevA"; |
| 22 |
compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp"; |
| 23 |
|
| 24 |
aliases { |
| 25 |
ethernet0 = &gem3; |
| 26 |
i2c0 = &i2c0; |
| 27 |
i2c1 = &i2c1; |
| 28 |
mmc0 = &sdhci1; |
| 29 |
nvmem0 = &eeprom; |
| 30 |
rtc0 = &rtc; |
| 31 |
serial0 = &uart0; |
| 32 |
serial1 = &uart1; |
| 33 |
serial2 = &dcc; |
| 34 |
spi0 = &qspi; |
| 35 |
usb0 = &usb0; |
| 36 |
}; |
| 37 |
|
| 38 |
chosen { |
| 39 |
bootargs = "earlycon"; |
| 40 |
stdout-path = "serial0:115200n8"; |
| 41 |
}; |
| 42 |
|
| 43 |
memory@0 { |
| 44 |
device_type = "memory"; |
| 45 |
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; |
| 46 |
}; |
| 47 |
|
| 48 |
gpio-keys { |
| 49 |
compatible = "gpio-keys"; |
| 50 |
autorepeat; |
| 51 |
switch-19 { |
| 52 |
label = "sw19"; |
| 53 |
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; |
| 54 |
linux,code = <KEY_DOWN>; |
| 55 |
wakeup-source; |
| 56 |
autorepeat; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
leds { |
| 61 |
compatible = "gpio-leds"; |
| 62 |
heartbeat-led { |
| 63 |
label = "heartbeat"; |
| 64 |
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; |
| 65 |
linux,default-trigger = "heartbeat"; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
ina226-u76 { |
| 70 |
compatible = "iio-hwmon"; |
| 71 |
io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; |
| 72 |
}; |
| 73 |
ina226-u77 { |
| 74 |
compatible = "iio-hwmon"; |
| 75 |
io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; |
| 76 |
}; |
| 77 |
ina226-u78 { |
| 78 |
compatible = "iio-hwmon"; |
| 79 |
io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; |
| 80 |
}; |
| 81 |
ina226-u87 { |
| 82 |
compatible = "iio-hwmon"; |
| 83 |
io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; |
| 84 |
}; |
| 85 |
ina226-u85 { |
| 86 |
compatible = "iio-hwmon"; |
| 87 |
io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; |
| 88 |
}; |
| 89 |
ina226-u86 { |
| 90 |
compatible = "iio-hwmon"; |
| 91 |
io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; |
| 92 |
}; |
| 93 |
ina226-u93 { |
| 94 |
compatible = "iio-hwmon"; |
| 95 |
io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; |
| 96 |
}; |
| 97 |
ina226-u88 { |
| 98 |
compatible = "iio-hwmon"; |
| 99 |
io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; |
| 100 |
}; |
| 101 |
ina226-u15 { |
| 102 |
compatible = "iio-hwmon"; |
| 103 |
io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; |
| 104 |
}; |
| 105 |
ina226-u92 { |
| 106 |
compatible = "iio-hwmon"; |
| 107 |
io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; |
| 108 |
}; |
| 109 |
ina226-u79 { |
| 110 |
compatible = "iio-hwmon"; |
| 111 |
io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; |
| 112 |
}; |
| 113 |
ina226-u81 { |
| 114 |
compatible = "iio-hwmon"; |
| 115 |
io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; |
| 116 |
}; |
| 117 |
ina226-u80 { |
| 118 |
compatible = "iio-hwmon"; |
| 119 |
io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; |
| 120 |
}; |
| 121 |
ina226-u84 { |
| 122 |
compatible = "iio-hwmon"; |
| 123 |
io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; |
| 124 |
}; |
| 125 |
ina226-u16 { |
| 126 |
compatible = "iio-hwmon"; |
| 127 |
io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; |
| 128 |
}; |
| 129 |
ina226-u65 { |
| 130 |
compatible = "iio-hwmon"; |
| 131 |
io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; |
| 132 |
}; |
| 133 |
ina226-u74 { |
| 134 |
compatible = "iio-hwmon"; |
| 135 |
io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; |
| 136 |
}; |
| 137 |
ina226-u75 { |
| 138 |
compatible = "iio-hwmon"; |
| 139 |
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; |
| 140 |
}; |
| 141 |
|
| 142 |
/* 48MHz reference crystal */ |
| 143 |
ref48: ref48M { |
| 144 |
compatible = "fixed-clock"; |
| 145 |
#clock-cells = <0>; |
| 146 |
clock-frequency = <48000000>; |
| 147 |
}; |
| 148 |
|
| 149 |
refhdmi: refhdmi { |
| 150 |
compatible = "fixed-clock"; |
| 151 |
#clock-cells = <0>; |
| 152 |
clock-frequency = <114285000>; |
| 153 |
}; |
| 154 |
|
| 155 |
dpcon { |
| 156 |
compatible = "dp-connector"; |
| 157 |
label = "P11"; |
| 158 |
type = "full-size"; |
| 159 |
|
| 160 |
port { |
| 161 |
dpcon_in: endpoint { |
| 162 |
remote-endpoint = <&dpsub_dp_out>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&can1 { |
| 169 |
status = "okay"; |
| 170 |
pinctrl-names = "default"; |
| 171 |
pinctrl-0 = <&pinctrl_can1_default>; |
| 172 |
}; |
| 173 |
|
| 174 |
&dcc { |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&fpd_dma_chan1 { |
| 179 |
status = "okay"; |
| 180 |
}; |
| 181 |
|
| 182 |
&fpd_dma_chan2 { |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&fpd_dma_chan3 { |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&fpd_dma_chan4 { |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&fpd_dma_chan5 { |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&fpd_dma_chan6 { |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&fpd_dma_chan7 { |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&fpd_dma_chan8 { |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
&gem3 { |
| 211 |
status = "okay"; |
| 212 |
phy-handle = <&phy0>; |
| 213 |
phy-mode = "rgmii-id"; |
| 214 |
pinctrl-names = "default"; |
| 215 |
pinctrl-0 = <&pinctrl_gem3_default>; |
| 216 |
mdio: mdio { |
| 217 |
#address-cells = <1>; |
| 218 |
#size-cells = <0>; |
| 219 |
phy0: ethernet-phy@c { |
| 220 |
#phy-cells = <1>; |
| 221 |
reg = <0xc>; |
| 222 |
compatible = "ethernet-phy-id2000.a231"; |
| 223 |
ti,rx-internal-delay = <0x8>; |
| 224 |
ti,tx-internal-delay = <0xa>; |
| 225 |
ti,fifo-depth = <0x1>; |
| 226 |
ti,dp83867-rxctrl-strap-quirk; |
| 227 |
reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; |
| 228 |
}; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
&gpio { |
| 233 |
status = "okay"; |
| 234 |
pinctrl-names = "default"; |
| 235 |
pinctrl-0 = <&pinctrl_gpio_default>; |
| 236 |
}; |
| 237 |
|
| 238 |
&gpu { |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&i2c0 { |
| 243 |
status = "okay"; |
| 244 |
clock-frequency = <400000>; |
| 245 |
pinctrl-names = "default", "gpio"; |
| 246 |
pinctrl-0 = <&pinctrl_i2c0_default>; |
| 247 |
pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| 248 |
scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 249 |
sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 250 |
|
| 251 |
tca6416_u97: gpio@20 { |
| 252 |
compatible = "ti,tca6416"; |
| 253 |
reg = <0x20>; |
| 254 |
gpio-controller; /* interrupt not connected */ |
| 255 |
#gpio-cells = <2>; |
| 256 |
/* |
| 257 |
* IRQ not connected |
| 258 |
* Lines: |
| 259 |
* 0 - SFP_SI5328_INT_ALM |
| 260 |
* 1 - HDMI_SI5328_INT_ALM |
| 261 |
* 5 - IIC_MUX_RESET_B |
| 262 |
* 6 - GEM3_EXP_RESET_B |
| 263 |
* 10 - FMC_HPC0_PRSNT_M2C_B |
| 264 |
* 11 - FMC_HPC1_PRSNT_M2C_B |
| 265 |
* 2-4, 7, 12-17 - not connected |
| 266 |
*/ |
| 267 |
}; |
| 268 |
|
| 269 |
tca6416_u61: gpio@21 { |
| 270 |
compatible = "ti,tca6416"; |
| 271 |
reg = <0x21>; |
| 272 |
gpio-controller; |
| 273 |
#gpio-cells = <2>; |
| 274 |
/* |
| 275 |
* IRQ not connected |
| 276 |
* Lines: |
| 277 |
* 0 - VCCPSPLL_EN |
| 278 |
* 1 - MGTRAVCC_EN |
| 279 |
* 2 - MGTRAVTT_EN |
| 280 |
* 3 - VCCPSDDRPLL_EN |
| 281 |
* 4 - MIO26_PMU_INPUT_LS |
| 282 |
* 5 - PL_PMBUS_ALERT |
| 283 |
* 6 - PS_PMBUS_ALERT |
| 284 |
* 7 - MAXIM_PMBUS_ALERT |
| 285 |
* 10 - PL_DDR4_VTERM_EN |
| 286 |
* 11 - PL_DDR4_VPP_2V5_EN |
| 287 |
* 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON |
| 288 |
* 13 - PS_DIMM_SUSPEND_EN |
| 289 |
* 14 - PS_DDR4_VTERM_EN |
| 290 |
* 15 - PS_DDR4_VPP_2V5_EN |
| 291 |
* 16 - 17 - not connected |
| 292 |
*/ |
| 293 |
}; |
| 294 |
|
| 295 |
i2c-mux@75 { /* u60 */ |
| 296 |
compatible = "nxp,pca9544"; |
| 297 |
#address-cells = <1>; |
| 298 |
#size-cells = <0>; |
| 299 |
reg = <0x75>; |
| 300 |
i2c@0 { |
| 301 |
#address-cells = <1>; |
| 302 |
#size-cells = <0>; |
| 303 |
reg = <0>; |
| 304 |
/* PS_PMBUS */ |
| 305 |
u76: ina226@40 { /* u76 */ |
| 306 |
compatible = "ti,ina226"; |
| 307 |
#io-channel-cells = <1>; |
| 308 |
label = "ina226-u76"; |
| 309 |
reg = <0x40>; |
| 310 |
shunt-resistor = <5000>; |
| 311 |
}; |
| 312 |
u77: ina226@41 { /* u77 */ |
| 313 |
compatible = "ti,ina226"; |
| 314 |
#io-channel-cells = <1>; |
| 315 |
label = "ina226-u77"; |
| 316 |
reg = <0x41>; |
| 317 |
shunt-resistor = <5000>; |
| 318 |
}; |
| 319 |
u78: ina226@42 { /* u78 */ |
| 320 |
compatible = "ti,ina226"; |
| 321 |
#io-channel-cells = <1>; |
| 322 |
label = "ina226-u78"; |
| 323 |
reg = <0x42>; |
| 324 |
shunt-resistor = <5000>; |
| 325 |
}; |
| 326 |
u87: ina226@43 { /* u87 */ |
| 327 |
compatible = "ti,ina226"; |
| 328 |
#io-channel-cells = <1>; |
| 329 |
label = "ina226-u87"; |
| 330 |
reg = <0x43>; |
| 331 |
shunt-resistor = <5000>; |
| 332 |
}; |
| 333 |
u85: ina226@44 { /* u85 */ |
| 334 |
compatible = "ti,ina226"; |
| 335 |
#io-channel-cells = <1>; |
| 336 |
label = "ina226-u85"; |
| 337 |
reg = <0x44>; |
| 338 |
shunt-resistor = <5000>; |
| 339 |
}; |
| 340 |
u86: ina226@45 { /* u86 */ |
| 341 |
compatible = "ti,ina226"; |
| 342 |
#io-channel-cells = <1>; |
| 343 |
label = "ina226-u86"; |
| 344 |
reg = <0x45>; |
| 345 |
shunt-resistor = <5000>; |
| 346 |
}; |
| 347 |
u93: ina226@46 { /* u93 */ |
| 348 |
compatible = "ti,ina226"; |
| 349 |
#io-channel-cells = <1>; |
| 350 |
label = "ina226-u93"; |
| 351 |
reg = <0x46>; |
| 352 |
shunt-resistor = <5000>; |
| 353 |
}; |
| 354 |
u88: ina226@47 { /* u88 */ |
| 355 |
compatible = "ti,ina226"; |
| 356 |
#io-channel-cells = <1>; |
| 357 |
label = "ina226-u88"; |
| 358 |
reg = <0x47>; |
| 359 |
shunt-resistor = <5000>; |
| 360 |
}; |
| 361 |
u15: ina226@4a { /* u15 */ |
| 362 |
compatible = "ti,ina226"; |
| 363 |
#io-channel-cells = <1>; |
| 364 |
label = "ina226-u15"; |
| 365 |
reg = <0x4a>; |
| 366 |
shunt-resistor = <5000>; |
| 367 |
}; |
| 368 |
u92: ina226@4b { /* u92 */ |
| 369 |
compatible = "ti,ina226"; |
| 370 |
#io-channel-cells = <1>; |
| 371 |
label = "ina226-u92"; |
| 372 |
reg = <0x4b>; |
| 373 |
shunt-resistor = <5000>; |
| 374 |
}; |
| 375 |
}; |
| 376 |
i2c@1 { |
| 377 |
#address-cells = <1>; |
| 378 |
#size-cells = <0>; |
| 379 |
reg = <1>; |
| 380 |
/* PL_PMBUS */ |
| 381 |
u79: ina226@40 { /* u79 */ |
| 382 |
compatible = "ti,ina226"; |
| 383 |
#io-channel-cells = <1>; |
| 384 |
label = "ina226-u79"; |
| 385 |
reg = <0x40>; |
| 386 |
shunt-resistor = <2000>; |
| 387 |
}; |
| 388 |
u81: ina226@41 { /* u81 */ |
| 389 |
compatible = "ti,ina226"; |
| 390 |
#io-channel-cells = <1>; |
| 391 |
label = "ina226-u81"; |
| 392 |
reg = <0x41>; |
| 393 |
shunt-resistor = <5000>; |
| 394 |
}; |
| 395 |
u80: ina226@42 { /* u80 */ |
| 396 |
compatible = "ti,ina226"; |
| 397 |
#io-channel-cells = <1>; |
| 398 |
label = "ina226-u80"; |
| 399 |
reg = <0x42>; |
| 400 |
shunt-resistor = <5000>; |
| 401 |
}; |
| 402 |
u84: ina226@43 { /* u84 */ |
| 403 |
compatible = "ti,ina226"; |
| 404 |
#io-channel-cells = <1>; |
| 405 |
label = "ina226-u84"; |
| 406 |
reg = <0x43>; |
| 407 |
shunt-resistor = <5000>; |
| 408 |
}; |
| 409 |
u16: ina226@44 { /* u16 */ |
| 410 |
compatible = "ti,ina226"; |
| 411 |
#io-channel-cells = <1>; |
| 412 |
label = "ina226-u16"; |
| 413 |
reg = <0x44>; |
| 414 |
shunt-resistor = <5000>; |
| 415 |
}; |
| 416 |
u65: ina226@45 { /* u65 */ |
| 417 |
compatible = "ti,ina226"; |
| 418 |
#io-channel-cells = <1>; |
| 419 |
label = "ina226-u65"; |
| 420 |
reg = <0x45>; |
| 421 |
shunt-resistor = <5000>; |
| 422 |
}; |
| 423 |
u74: ina226@46 { /* u74 */ |
| 424 |
compatible = "ti,ina226"; |
| 425 |
#io-channel-cells = <1>; |
| 426 |
label = "ina226-u74"; |
| 427 |
reg = <0x46>; |
| 428 |
shunt-resistor = <5000>; |
| 429 |
}; |
| 430 |
u75: ina226@47 { /* u75 */ |
| 431 |
compatible = "ti,ina226"; |
| 432 |
#io-channel-cells = <1>; |
| 433 |
label = "ina226-u75"; |
| 434 |
reg = <0x47>; |
| 435 |
shunt-resistor = <5000>; |
| 436 |
}; |
| 437 |
}; |
| 438 |
i2c@2 { |
| 439 |
#address-cells = <1>; |
| 440 |
#size-cells = <0>; |
| 441 |
reg = <2>; |
| 442 |
/* MAXIM_PMBUS - 00 */ |
| 443 |
max15301@a { /* u46 */ |
| 444 |
compatible = "maxim,max15301"; |
| 445 |
reg = <0xa>; |
| 446 |
}; |
| 447 |
max15303@b { /* u4 */ |
| 448 |
compatible = "maxim,max15303"; |
| 449 |
reg = <0xb>; |
| 450 |
}; |
| 451 |
max15303@10 { /* u13 */ |
| 452 |
compatible = "maxim,max15303"; |
| 453 |
reg = <0x10>; |
| 454 |
}; |
| 455 |
max15301@13 { /* u47 */ |
| 456 |
compatible = "maxim,max15301"; |
| 457 |
reg = <0x13>; |
| 458 |
}; |
| 459 |
max15303@14 { /* u7 */ |
| 460 |
compatible = "maxim,max15303"; |
| 461 |
reg = <0x14>; |
| 462 |
}; |
| 463 |
max15303@15 { /* u6 */ |
| 464 |
compatible = "maxim,max15303"; |
| 465 |
reg = <0x15>; |
| 466 |
}; |
| 467 |
max15303@16 { /* u10 */ |
| 468 |
compatible = "maxim,max15303"; |
| 469 |
reg = <0x16>; |
| 470 |
}; |
| 471 |
max15303@17 { /* u9 */ |
| 472 |
compatible = "maxim,max15303"; |
| 473 |
reg = <0x17>; |
| 474 |
}; |
| 475 |
max15301@18 { /* u63 */ |
| 476 |
compatible = "maxim,max15301"; |
| 477 |
reg = <0x18>; |
| 478 |
}; |
| 479 |
max15303@1a { /* u49 */ |
| 480 |
compatible = "maxim,max15303"; |
| 481 |
reg = <0x1a>; |
| 482 |
}; |
| 483 |
max15303@1b { /* u8 */ |
| 484 |
compatible = "maxim,max15303"; |
| 485 |
reg = <0x1b>; |
| 486 |
}; |
| 487 |
max15303@1d { /* u18 */ |
| 488 |
compatible = "maxim,max15303"; |
| 489 |
reg = <0x1d>; |
| 490 |
}; |
| 491 |
|
| 492 |
max20751@72 { /* u95 */ |
| 493 |
compatible = "maxim,max20751"; |
| 494 |
reg = <0x72>; |
| 495 |
}; |
| 496 |
max20751@73 { /* u96 */ |
| 497 |
compatible = "maxim,max20751"; |
| 498 |
reg = <0x73>; |
| 499 |
}; |
| 500 |
}; |
| 501 |
/* Bus 3 is not connected */ |
| 502 |
}; |
| 503 |
}; |
| 504 |
|
| 505 |
&i2c1 { |
| 506 |
status = "okay"; |
| 507 |
clock-frequency = <400000>; |
| 508 |
pinctrl-names = "default", "gpio"; |
| 509 |
pinctrl-0 = <&pinctrl_i2c1_default>; |
| 510 |
pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 511 |
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 512 |
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 513 |
|
| 514 |
/* PL i2c via PCA9306 - u45 */ |
| 515 |
i2c-mux@74 { /* u34 */ |
| 516 |
compatible = "nxp,pca9548"; |
| 517 |
#address-cells = <1>; |
| 518 |
#size-cells = <0>; |
| 519 |
reg = <0x74>; |
| 520 |
i2c@0 { |
| 521 |
#address-cells = <1>; |
| 522 |
#size-cells = <0>; |
| 523 |
reg = <0>; |
| 524 |
/* |
| 525 |
* IIC_EEPROM 1kB memory which uses 256B blocks |
| 526 |
* where every block has different address. |
| 527 |
* 0 - 256B address 0x54 |
| 528 |
* 256B - 512B address 0x55 |
| 529 |
* 512B - 768B address 0x56 |
| 530 |
* 768B - 1024B address 0x57 |
| 531 |
*/ |
| 532 |
eeprom: eeprom@54 { /* u23 */ |
| 533 |
compatible = "atmel,24c08"; |
| 534 |
reg = <0x54>; |
| 535 |
}; |
| 536 |
}; |
| 537 |
i2c@1 { |
| 538 |
#address-cells = <1>; |
| 539 |
#size-cells = <0>; |
| 540 |
reg = <1>; |
| 541 |
si5341: clock-generator@36 { /* SI5341 - u69 */ |
| 542 |
compatible = "silabs,si5341"; |
| 543 |
reg = <0x36>; |
| 544 |
#clock-cells = <2>; |
| 545 |
#address-cells = <1>; |
| 546 |
#size-cells = <0>; |
| 547 |
clocks = <&ref48>; |
| 548 |
clock-names = "xtal"; |
| 549 |
clock-output-names = "si5341"; |
| 550 |
|
| 551 |
si5341_0: out@0 { |
| 552 |
/* refclk0 for PS-GT, used for DP */ |
| 553 |
reg = <0>; |
| 554 |
always-on; |
| 555 |
}; |
| 556 |
si5341_2: out@2 { |
| 557 |
/* refclk2 for PS-GT, used for USB3 */ |
| 558 |
reg = <2>; |
| 559 |
always-on; |
| 560 |
}; |
| 561 |
si5341_3: out@3 { |
| 562 |
/* refclk3 for PS-GT, used for SATA */ |
| 563 |
reg = <3>; |
| 564 |
always-on; |
| 565 |
}; |
| 566 |
si5341_6: out@6 { |
| 567 |
/* refclk6 PL CLK125 */ |
| 568 |
reg = <6>; |
| 569 |
always-on; |
| 570 |
}; |
| 571 |
si5341_7: out@7 { |
| 572 |
/* refclk7 PL CLK74 */ |
| 573 |
reg = <7>; |
| 574 |
always-on; |
| 575 |
}; |
| 576 |
si5341_9: out@9 { |
| 577 |
/* refclk9 used for PS_REF_CLK 33.3 MHz */ |
| 578 |
reg = <9>; |
| 579 |
always-on; |
| 580 |
}; |
| 581 |
}; |
| 582 |
|
| 583 |
}; |
| 584 |
i2c@2 { |
| 585 |
#address-cells = <1>; |
| 586 |
#size-cells = <0>; |
| 587 |
reg = <2>; |
| 588 |
si570_1: clock-generator@5d { /* USER SI570 - u42 */ |
| 589 |
#clock-cells = <0>; |
| 590 |
compatible = "silabs,si570"; |
| 591 |
reg = <0x5d>; |
| 592 |
temperature-stability = <50>; |
| 593 |
factory-fout = <300000000>; |
| 594 |
clock-frequency = <300000000>; |
| 595 |
clock-output-names = "si570_user"; |
| 596 |
}; |
| 597 |
}; |
| 598 |
i2c@3 { |
| 599 |
#address-cells = <1>; |
| 600 |
#size-cells = <0>; |
| 601 |
reg = <3>; |
| 602 |
si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ |
| 603 |
#clock-cells = <0>; |
| 604 |
compatible = "silabs,si570"; |
| 605 |
reg = <0x5d>; |
| 606 |
temperature-stability = <50>; /* copy from zc702 */ |
| 607 |
factory-fout = <156250000>; |
| 608 |
clock-frequency = <156250000>; |
| 609 |
clock-output-names = "si570_mgt"; |
| 610 |
}; |
| 611 |
}; |
| 612 |
i2c@4 { |
| 613 |
#address-cells = <1>; |
| 614 |
#size-cells = <0>; |
| 615 |
reg = <4>; |
| 616 |
/* SI5328 - u20 */ |
| 617 |
}; |
| 618 |
i2c@5 { |
| 619 |
#address-cells = <1>; |
| 620 |
#size-cells = <0>; |
| 621 |
reg = <5>; /* FAN controller */ |
| 622 |
temp@4c {/* lm96163 - u128 */ |
| 623 |
compatible = "national,lm96163"; |
| 624 |
reg = <0x4c>; |
| 625 |
}; |
| 626 |
}; |
| 627 |
/* 6 - 7 unconnected */ |
| 628 |
}; |
| 629 |
|
| 630 |
i2c-mux@75 { |
| 631 |
compatible = "nxp,pca9548"; /* u135 */ |
| 632 |
#address-cells = <1>; |
| 633 |
#size-cells = <0>; |
| 634 |
reg = <0x75>; |
| 635 |
|
| 636 |
i2c@0 { |
| 637 |
#address-cells = <1>; |
| 638 |
#size-cells = <0>; |
| 639 |
reg = <0>; |
| 640 |
/* HPC0_IIC */ |
| 641 |
}; |
| 642 |
i2c@1 { |
| 643 |
#address-cells = <1>; |
| 644 |
#size-cells = <0>; |
| 645 |
reg = <1>; |
| 646 |
/* HPC1_IIC */ |
| 647 |
}; |
| 648 |
i2c@2 { |
| 649 |
#address-cells = <1>; |
| 650 |
#size-cells = <0>; |
| 651 |
reg = <2>; |
| 652 |
/* SYSMON */ |
| 653 |
}; |
| 654 |
i2c@3 { |
| 655 |
#address-cells = <1>; |
| 656 |
#size-cells = <0>; |
| 657 |
reg = <3>; |
| 658 |
/* DDR4 SODIMM */ |
| 659 |
}; |
| 660 |
i2c@4 { |
| 661 |
#address-cells = <1>; |
| 662 |
#size-cells = <0>; |
| 663 |
reg = <4>; |
| 664 |
/* SEP 3 */ |
| 665 |
}; |
| 666 |
i2c@5 { |
| 667 |
#address-cells = <1>; |
| 668 |
#size-cells = <0>; |
| 669 |
reg = <5>; |
| 670 |
/* SEP 2 */ |
| 671 |
}; |
| 672 |
i2c@6 { |
| 673 |
#address-cells = <1>; |
| 674 |
#size-cells = <0>; |
| 675 |
reg = <6>; |
| 676 |
/* SEP 1 */ |
| 677 |
}; |
| 678 |
i2c@7 { |
| 679 |
#address-cells = <1>; |
| 680 |
#size-cells = <0>; |
| 681 |
reg = <7>; |
| 682 |
/* SEP 0 */ |
| 683 |
}; |
| 684 |
}; |
| 685 |
}; |
| 686 |
|
| 687 |
&pinctrl0 { |
| 688 |
status = "okay"; |
| 689 |
pinctrl_i2c0_default: i2c0-default { |
| 690 |
mux { |
| 691 |
groups = "i2c0_3_grp"; |
| 692 |
function = "i2c0"; |
| 693 |
}; |
| 694 |
|
| 695 |
conf { |
| 696 |
groups = "i2c0_3_grp"; |
| 697 |
bias-pull-up; |
| 698 |
slew-rate = <SLEW_RATE_SLOW>; |
| 699 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 700 |
}; |
| 701 |
}; |
| 702 |
|
| 703 |
pinctrl_i2c0_gpio: i2c0-gpio-grp { |
| 704 |
mux { |
| 705 |
groups = "gpio0_14_grp", "gpio0_15_grp"; |
| 706 |
function = "gpio0"; |
| 707 |
}; |
| 708 |
|
| 709 |
conf { |
| 710 |
groups = "gpio0_14_grp", "gpio0_15_grp"; |
| 711 |
slew-rate = <SLEW_RATE_SLOW>; |
| 712 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 713 |
}; |
| 714 |
}; |
| 715 |
|
| 716 |
pinctrl_i2c1_default: i2c1-default { |
| 717 |
mux { |
| 718 |
groups = "i2c1_4_grp"; |
| 719 |
function = "i2c1"; |
| 720 |
}; |
| 721 |
|
| 722 |
conf { |
| 723 |
groups = "i2c1_4_grp"; |
| 724 |
bias-pull-up; |
| 725 |
slew-rate = <SLEW_RATE_SLOW>; |
| 726 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 727 |
}; |
| 728 |
}; |
| 729 |
|
| 730 |
pinctrl_i2c1_gpio: i2c1-gpio-grp { |
| 731 |
mux { |
| 732 |
groups = "gpio0_16_grp", "gpio0_17_grp"; |
| 733 |
function = "gpio0"; |
| 734 |
}; |
| 735 |
|
| 736 |
conf { |
| 737 |
groups = "gpio0_16_grp", "gpio0_17_grp"; |
| 738 |
slew-rate = <SLEW_RATE_SLOW>; |
| 739 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 740 |
}; |
| 741 |
}; |
| 742 |
|
| 743 |
pinctrl_uart0_default: uart0-default { |
| 744 |
mux { |
| 745 |
groups = "uart0_4_grp"; |
| 746 |
function = "uart0"; |
| 747 |
}; |
| 748 |
|
| 749 |
conf { |
| 750 |
groups = "uart0_4_grp"; |
| 751 |
slew-rate = <SLEW_RATE_SLOW>; |
| 752 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 753 |
}; |
| 754 |
|
| 755 |
conf-rx { |
| 756 |
pins = "MIO18"; |
| 757 |
bias-high-impedance; |
| 758 |
}; |
| 759 |
|
| 760 |
conf-tx { |
| 761 |
pins = "MIO19"; |
| 762 |
bias-disable; |
| 763 |
}; |
| 764 |
}; |
| 765 |
|
| 766 |
pinctrl_uart1_default: uart1-default { |
| 767 |
mux { |
| 768 |
groups = "uart1_5_grp"; |
| 769 |
function = "uart1"; |
| 770 |
}; |
| 771 |
|
| 772 |
conf { |
| 773 |
groups = "uart1_5_grp"; |
| 774 |
slew-rate = <SLEW_RATE_SLOW>; |
| 775 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 776 |
}; |
| 777 |
|
| 778 |
conf-rx { |
| 779 |
pins = "MIO21"; |
| 780 |
bias-high-impedance; |
| 781 |
}; |
| 782 |
|
| 783 |
conf-tx { |
| 784 |
pins = "MIO20"; |
| 785 |
bias-disable; |
| 786 |
}; |
| 787 |
}; |
| 788 |
|
| 789 |
pinctrl_usb0_default: usb0-default { |
| 790 |
mux { |
| 791 |
groups = "usb0_0_grp"; |
| 792 |
function = "usb0"; |
| 793 |
}; |
| 794 |
|
| 795 |
conf { |
| 796 |
groups = "usb0_0_grp"; |
| 797 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 798 |
}; |
| 799 |
|
| 800 |
conf-rx { |
| 801 |
pins = "MIO52", "MIO53", "MIO55"; |
| 802 |
bias-high-impedance; |
| 803 |
drive-strength = <12>; |
| 804 |
slew-rate = <SLEW_RATE_FAST>; |
| 805 |
}; |
| 806 |
|
| 807 |
conf-tx { |
| 808 |
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", |
| 809 |
"MIO60", "MIO61", "MIO62", "MIO63"; |
| 810 |
bias-disable; |
| 811 |
drive-strength = <12>; |
| 812 |
slew-rate = <SLEW_RATE_FAST>; |
| 813 |
}; |
| 814 |
}; |
| 815 |
|
| 816 |
pinctrl_gem3_default: gem3-default { |
| 817 |
mux { |
| 818 |
function = "ethernet3"; |
| 819 |
groups = "ethernet3_0_grp"; |
| 820 |
}; |
| 821 |
|
| 822 |
conf { |
| 823 |
groups = "ethernet3_0_grp"; |
| 824 |
slew-rate = <SLEW_RATE_SLOW>; |
| 825 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 826 |
}; |
| 827 |
|
| 828 |
conf-rx { |
| 829 |
pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", |
| 830 |
"MIO75"; |
| 831 |
bias-high-impedance; |
| 832 |
low-power-disable; |
| 833 |
}; |
| 834 |
|
| 835 |
conf-tx { |
| 836 |
pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", |
| 837 |
"MIO69"; |
| 838 |
bias-disable; |
| 839 |
low-power-enable; |
| 840 |
}; |
| 841 |
|
| 842 |
mux-mdio { |
| 843 |
function = "mdio3"; |
| 844 |
groups = "mdio3_0_grp"; |
| 845 |
}; |
| 846 |
|
| 847 |
conf-mdio { |
| 848 |
groups = "mdio3_0_grp"; |
| 849 |
slew-rate = <SLEW_RATE_SLOW>; |
| 850 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 851 |
bias-disable; |
| 852 |
}; |
| 853 |
}; |
| 854 |
|
| 855 |
pinctrl_can1_default: can1-default { |
| 856 |
mux { |
| 857 |
function = "can1"; |
| 858 |
groups = "can1_6_grp"; |
| 859 |
}; |
| 860 |
|
| 861 |
conf { |
| 862 |
groups = "can1_6_grp"; |
| 863 |
slew-rate = <SLEW_RATE_SLOW>; |
| 864 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 865 |
}; |
| 866 |
|
| 867 |
conf-rx { |
| 868 |
pins = "MIO25"; |
| 869 |
bias-high-impedance; |
| 870 |
}; |
| 871 |
|
| 872 |
conf-tx { |
| 873 |
pins = "MIO24"; |
| 874 |
bias-disable; |
| 875 |
}; |
| 876 |
}; |
| 877 |
|
| 878 |
pinctrl_sdhci1_default: sdhci1-default { |
| 879 |
mux { |
| 880 |
groups = "sdio1_0_grp"; |
| 881 |
function = "sdio1"; |
| 882 |
}; |
| 883 |
|
| 884 |
conf { |
| 885 |
groups = "sdio1_0_grp"; |
| 886 |
slew-rate = <SLEW_RATE_SLOW>; |
| 887 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 888 |
bias-disable; |
| 889 |
}; |
| 890 |
|
| 891 |
mux-cd { |
| 892 |
groups = "sdio1_cd_0_grp"; |
| 893 |
function = "sdio1_cd"; |
| 894 |
}; |
| 895 |
|
| 896 |
conf-cd { |
| 897 |
groups = "sdio1_cd_0_grp"; |
| 898 |
bias-high-impedance; |
| 899 |
bias-pull-up; |
| 900 |
slew-rate = <SLEW_RATE_SLOW>; |
| 901 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 902 |
}; |
| 903 |
|
| 904 |
mux-wp { |
| 905 |
groups = "sdio1_wp_0_grp"; |
| 906 |
function = "sdio1_wp"; |
| 907 |
}; |
| 908 |
|
| 909 |
conf-wp { |
| 910 |
groups = "sdio1_wp_0_grp"; |
| 911 |
bias-high-impedance; |
| 912 |
bias-pull-up; |
| 913 |
slew-rate = <SLEW_RATE_SLOW>; |
| 914 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 915 |
}; |
| 916 |
}; |
| 917 |
|
| 918 |
pinctrl_gpio_default: gpio-default { |
| 919 |
mux { |
| 920 |
function = "gpio0"; |
| 921 |
groups = "gpio0_22_grp", "gpio0_23_grp"; |
| 922 |
}; |
| 923 |
|
| 924 |
conf { |
| 925 |
groups = "gpio0_22_grp", "gpio0_23_grp"; |
| 926 |
slew-rate = <SLEW_RATE_SLOW>; |
| 927 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 928 |
}; |
| 929 |
|
| 930 |
mux-msp { |
| 931 |
function = "gpio0"; |
| 932 |
groups = "gpio0_13_grp", "gpio0_38_grp"; |
| 933 |
}; |
| 934 |
|
| 935 |
conf-msp { |
| 936 |
groups = "gpio0_13_grp", "gpio0_38_grp"; |
| 937 |
slew-rate = <SLEW_RATE_SLOW>; |
| 938 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 939 |
}; |
| 940 |
|
| 941 |
conf-pull-up { |
| 942 |
pins = "MIO22"; |
| 943 |
bias-pull-up; |
| 944 |
}; |
| 945 |
|
| 946 |
conf-pull-none { |
| 947 |
pins = "MIO13", "MIO23", "MIO38"; |
| 948 |
bias-disable; |
| 949 |
}; |
| 950 |
}; |
| 951 |
}; |
| 952 |
|
| 953 |
&psgtr { |
| 954 |
status = "okay"; |
| 955 |
/* nc, sata, usb3, dp */ |
| 956 |
clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; |
| 957 |
clock-names = "ref1", "ref2", "ref3"; |
| 958 |
}; |
| 959 |
|
| 960 |
&qspi { |
| 961 |
status = "okay"; |
| 962 |
flash@0 { |
| 963 |
compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ |
| 964 |
#address-cells = <1>; |
| 965 |
#size-cells = <1>; |
| 966 |
reg = <0x0>; |
| 967 |
spi-tx-bus-width = <4>; |
| 968 |
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ |
| 969 |
spi-max-frequency = <108000000>; /* Based on DC1 spec */ |
| 970 |
}; |
| 971 |
}; |
| 972 |
|
| 973 |
&rtc { |
| 974 |
status = "okay"; |
| 975 |
}; |
| 976 |
|
| 977 |
&sata { |
| 978 |
status = "okay"; |
| 979 |
/* SATA OOB timing settings */ |
| 980 |
ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; |
| 981 |
ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; |
| 982 |
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; |
| 983 |
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; |
| 984 |
ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; |
| 985 |
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; |
| 986 |
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; |
| 987 |
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; |
| 988 |
phy-names = "sata-phy"; |
| 989 |
phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; |
| 990 |
}; |
| 991 |
|
| 992 |
/* SD1 with level shifter */ |
| 993 |
&sdhci1 { |
| 994 |
status = "okay"; |
| 995 |
/* |
| 996 |
* This property should be removed for supporting UHS mode |
| 997 |
*/ |
| 998 |
no-1-8-v; |
| 999 |
pinctrl-names = "default"; |
| 1000 |
pinctrl-0 = <&pinctrl_sdhci1_default>; |
| 1001 |
xlnx,mio-bank = <1>; |
| 1002 |
}; |
| 1003 |
|
| 1004 |
&uart0 { |
| 1005 |
status = "okay"; |
| 1006 |
pinctrl-names = "default"; |
| 1007 |
pinctrl-0 = <&pinctrl_uart0_default>; |
| 1008 |
}; |
| 1009 |
|
| 1010 |
&uart1 { |
| 1011 |
status = "okay"; |
| 1012 |
pinctrl-names = "default"; |
| 1013 |
pinctrl-0 = <&pinctrl_uart1_default>; |
| 1014 |
}; |
| 1015 |
|
| 1016 |
/* ULPI SMSC USB3320 */ |
| 1017 |
&usb0 { |
| 1018 |
status = "okay"; |
| 1019 |
pinctrl-names = "default"; |
| 1020 |
pinctrl-0 = <&pinctrl_usb0_default>; |
| 1021 |
phy-names = "usb3-phy"; |
| 1022 |
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
&dwc3_0 { |
| 1026 |
status = "okay"; |
| 1027 |
dr_mode = "host"; |
| 1028 |
snps,usb3_lpm_capable; |
| 1029 |
maximum-speed = "super-speed"; |
| 1030 |
}; |
| 1031 |
|
| 1032 |
&watchdog0 { |
| 1033 |
status = "okay"; |
| 1034 |
}; |
| 1035 |
|
| 1036 |
&zynqmp_dpdma { |
| 1037 |
status = "okay"; |
| 1038 |
}; |
| 1039 |
|
| 1040 |
&zynqmp_dpsub { |
| 1041 |
status = "okay"; |
| 1042 |
phy-names = "dp-phy0", "dp-phy1"; |
| 1043 |
phys = <&psgtr 1 PHY_TYPE_DP 0 3>, |
| 1044 |
<&psgtr 0 PHY_TYPE_DP 1 3>; |
| 1045 |
}; |
| 1046 |
|
| 1047 |
&out_dp { |
| 1048 |
dpsub_dp_out: endpoint { |
| 1049 |
remote-endpoint = <&dpcon_in>; |
| 1050 |
}; |
| 1051 |
}; |