| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* dts file for Xilinx ZynqMP ZCU100 revC |
| 4 |
* |
| 5 |
* (C) Copyright 2016 - 2022, Xilinx, Inc. |
| 6 |
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. |
| 7 |
* |
| 8 |
* Michal Simek <[email protected]> |
| 9 |
* Nathalie Chan King Choy |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
|
| 14 |
#include "zynqmp.dtsi" |
| 15 |
#include "zynqmp-clk-ccf.dtsi" |
| 16 |
#include <dt-bindings/input/input.h> |
| 17 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 18 |
#include <dt-bindings/gpio/gpio.h> |
| 19 |
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| 20 |
#include <dt-bindings/phy/phy.h> |
| 21 |
|
| 22 |
/ { |
| 23 |
model = "ZynqMP ZCU100 RevC"; |
| 24 |
compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp"; |
| 25 |
|
| 26 |
aliases { |
| 27 |
i2c0 = &i2c1; |
| 28 |
rtc0 = &rtc; |
| 29 |
serial0 = &uart1; |
| 30 |
serial1 = &uart0; |
| 31 |
serial2 = &dcc; |
| 32 |
spi0 = &spi0; |
| 33 |
spi1 = &spi1; |
| 34 |
usb0 = &usb0; |
| 35 |
usb1 = &usb1; |
| 36 |
mmc0 = &sdhci0; |
| 37 |
mmc1 = &sdhci1; |
| 38 |
}; |
| 39 |
|
| 40 |
chosen { |
| 41 |
bootargs = "earlycon"; |
| 42 |
stdout-path = "serial0:115200n8"; |
| 43 |
}; |
| 44 |
|
| 45 |
memory@0 { |
| 46 |
device_type = "memory"; |
| 47 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 48 |
}; |
| 49 |
|
| 50 |
gpio-keys { |
| 51 |
compatible = "gpio-keys"; |
| 52 |
autorepeat; |
| 53 |
switch-4 { |
| 54 |
label = "sw4"; |
| 55 |
gpios = <&gpio 23 GPIO_ACTIVE_LOW>; |
| 56 |
linux,code = <KEY_POWER>; |
| 57 |
wakeup-source; |
| 58 |
autorepeat; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
iio-hwmon { |
| 63 |
compatible = "iio-hwmon"; |
| 64 |
io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, |
| 65 |
<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, |
| 66 |
<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>, |
| 67 |
<&xilinx_ams 9>, <&xilinx_ams 10>, |
| 68 |
<&xilinx_ams 11>, <&xilinx_ams 12>; |
| 69 |
}; |
| 70 |
|
| 71 |
leds { |
| 72 |
compatible = "gpio-leds"; |
| 73 |
led-ds2 { |
| 74 |
label = "ds2"; |
| 75 |
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; |
| 76 |
linux,default-trigger = "heartbeat"; |
| 77 |
}; |
| 78 |
|
| 79 |
led-ds3 { |
| 80 |
label = "ds3"; |
| 81 |
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; |
| 82 |
linux,default-trigger = "phy0tx"; /* WLAN tx */ |
| 83 |
default-state = "off"; |
| 84 |
}; |
| 85 |
|
| 86 |
led-ds4 { |
| 87 |
label = "ds4"; |
| 88 |
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; |
| 89 |
linux,default-trigger = "phy0rx"; /* WLAN rx */ |
| 90 |
default-state = "off"; |
| 91 |
}; |
| 92 |
|
| 93 |
led-ds5 { |
| 94 |
label = "ds5"; |
| 95 |
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; |
| 96 |
linux,default-trigger = "bluetooth-power"; |
| 97 |
}; |
| 98 |
|
| 99 |
led-vbus-det { /* U5 USB5744 VBUS detection via MIO25 */ |
| 100 |
label = "vbus_det"; |
| 101 |
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; |
| 102 |
default-state = "on"; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
wmmcsdio_fixed: fixedregulator-mmcsdio { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
regulator-name = "wmmcsdio_fixed"; |
| 109 |
regulator-min-microvolt = <3300000>; |
| 110 |
regulator-max-microvolt = <3300000>; |
| 111 |
regulator-always-on; |
| 112 |
regulator-boot-on; |
| 113 |
}; |
| 114 |
|
| 115 |
sdio_pwrseq: sdio-pwrseq { |
| 116 |
compatible = "mmc-pwrseq-simple"; |
| 117 |
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ |
| 118 |
post-power-on-delay-ms = <10>; |
| 119 |
}; |
| 120 |
|
| 121 |
ina226 { |
| 122 |
compatible = "iio-hwmon"; |
| 123 |
io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; |
| 124 |
}; |
| 125 |
|
| 126 |
si5335_0: si5335-0 { /* clk0_usb - u23 */ |
| 127 |
compatible = "fixed-clock"; |
| 128 |
#clock-cells = <0>; |
| 129 |
clock-frequency = <26000000>; |
| 130 |
}; |
| 131 |
|
| 132 |
si5335_1: si5335-1 { /* clk1_dp - u23 */ |
| 133 |
compatible = "fixed-clock"; |
| 134 |
#clock-cells = <0>; |
| 135 |
clock-frequency = <27000000>; |
| 136 |
}; |
| 137 |
|
| 138 |
dpcon { |
| 139 |
compatible = "dp-connector"; |
| 140 |
label = "P11"; |
| 141 |
type = "full-size"; |
| 142 |
|
| 143 |
port { |
| 144 |
dpcon_in: endpoint { |
| 145 |
remote-endpoint = <&dpsub_dp_out>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&dcc { |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&gpio { |
| 156 |
status = "okay"; |
| 157 |
gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL", |
| 158 |
"I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS", |
| 159 |
"SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1", |
| 160 |
"SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1", |
| 161 |
"PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT", |
| 162 |
"VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE", |
| 163 |
"DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL", |
| 164 |
"", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C", |
| 165 |
"GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E", |
| 166 |
"GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3", |
| 167 |
"SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", |
| 168 |
"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", |
| 169 |
"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", |
| 170 |
"USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", |
| 171 |
"USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", |
| 172 |
"USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */ |
| 173 |
"", "", |
| 174 |
"", "", "", "", "", "", "", "", "", "", |
| 175 |
"", "", "", "", "", "", "", "", "", "", |
| 176 |
"", "", "", "", "", "", "", "", "", "", |
| 177 |
"", "", "", "", "", "", "", "", "", "", |
| 178 |
"", "", "", "", "", "", "", "", "", "", |
| 179 |
"", "", "", "", "", "", "", "", "", "", |
| 180 |
"", "", "", "", "", "", "", "", "", "", |
| 181 |
"", "", "", "", "", "", "", "", "", "", |
| 182 |
"", "", "", "", "", "", "", "", "", "", |
| 183 |
"", "", "", ""; |
| 184 |
}; |
| 185 |
|
| 186 |
&gpu { |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&i2c1 { |
| 191 |
status = "okay"; |
| 192 |
pinctrl-names = "default", "gpio"; |
| 193 |
pinctrl-0 = <&pinctrl_i2c1_default>; |
| 194 |
pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 195 |
scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 196 |
sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 197 |
clock-frequency = <100000>; |
| 198 |
i2c-mux@75 { /* u11 */ |
| 199 |
compatible = "nxp,pca9548"; |
| 200 |
#address-cells = <1>; |
| 201 |
#size-cells = <0>; |
| 202 |
reg = <0x75>; |
| 203 |
i2csw_0: i2c@0 { |
| 204 |
#address-cells = <1>; |
| 205 |
#size-cells = <0>; |
| 206 |
reg = <0>; |
| 207 |
label = "LS-I2C0"; |
| 208 |
}; |
| 209 |
i2csw_1: i2c@1 { |
| 210 |
#address-cells = <1>; |
| 211 |
#size-cells = <0>; |
| 212 |
reg = <1>; |
| 213 |
label = "LS-I2C1"; |
| 214 |
}; |
| 215 |
i2csw_2: i2c@2 { |
| 216 |
#address-cells = <1>; |
| 217 |
#size-cells = <0>; |
| 218 |
reg = <2>; |
| 219 |
label = "HS-I2C2"; |
| 220 |
}; |
| 221 |
i2csw_3: i2c@3 { |
| 222 |
#address-cells = <1>; |
| 223 |
#size-cells = <0>; |
| 224 |
reg = <3>; |
| 225 |
label = "HS-I2C3"; |
| 226 |
}; |
| 227 |
i2csw_4: i2c@4 { |
| 228 |
#address-cells = <1>; |
| 229 |
#size-cells = <0>; |
| 230 |
reg = <0x4>; |
| 231 |
|
| 232 |
pmic: pmic@5e { /* Custom TI PMIC u33 */ |
| 233 |
compatible = "ti,tps65086"; |
| 234 |
reg = <0x5e>; |
| 235 |
interrupt-parent = <&gpio>; |
| 236 |
interrupts = <77 IRQ_TYPE_LEVEL_LOW>; |
| 237 |
#gpio-cells = <2>; |
| 238 |
gpio-controller; |
| 239 |
}; |
| 240 |
}; |
| 241 |
i2csw_5: i2c@5 { |
| 242 |
#address-cells = <1>; |
| 243 |
#size-cells = <0>; |
| 244 |
reg = <5>; |
| 245 |
/* PS_PMBUS */ |
| 246 |
u35: ina226@40 { /* u35 */ |
| 247 |
compatible = "ti,ina226"; |
| 248 |
#io-channel-cells = <1>; |
| 249 |
reg = <0x40>; |
| 250 |
shunt-resistor = <10000>; |
| 251 |
/* MIO31 is alert which should be routed to PMUFW */ |
| 252 |
}; |
| 253 |
}; |
| 254 |
i2csw_6: i2c@6 { |
| 255 |
#address-cells = <1>; |
| 256 |
#size-cells = <0>; |
| 257 |
reg = <6>; |
| 258 |
/* |
| 259 |
* Not Connected |
| 260 |
*/ |
| 261 |
}; |
| 262 |
i2csw_7: i2c@7 { |
| 263 |
#address-cells = <1>; |
| 264 |
#size-cells = <0>; |
| 265 |
reg = <7>; |
| 266 |
/* |
| 267 |
* usb5744 (DNP) - U5 |
| 268 |
* 100kHz - this is default freq for us |
| 269 |
*/ |
| 270 |
}; |
| 271 |
}; |
| 272 |
}; |
| 273 |
|
| 274 |
&pinctrl0 { |
| 275 |
status = "okay"; |
| 276 |
pinctrl_i2c1_default: i2c1-default { |
| 277 |
mux { |
| 278 |
groups = "i2c1_1_grp"; |
| 279 |
function = "i2c1"; |
| 280 |
}; |
| 281 |
|
| 282 |
conf { |
| 283 |
groups = "i2c1_1_grp"; |
| 284 |
bias-pull-up; |
| 285 |
slew-rate = <SLEW_RATE_SLOW>; |
| 286 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 287 |
}; |
| 288 |
}; |
| 289 |
|
| 290 |
pinctrl_i2c1_gpio: i2c1-gpio-grp { |
| 291 |
mux { |
| 292 |
groups = "gpio0_4_grp", "gpio0_5_grp"; |
| 293 |
function = "gpio0"; |
| 294 |
}; |
| 295 |
|
| 296 |
conf { |
| 297 |
groups = "gpio0_4_grp", "gpio0_5_grp"; |
| 298 |
slew-rate = <SLEW_RATE_SLOW>; |
| 299 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
pinctrl_sdhci0_default: sdhci0-default { |
| 304 |
mux { |
| 305 |
groups = "sdio0_3_grp"; |
| 306 |
function = "sdio0"; |
| 307 |
}; |
| 308 |
|
| 309 |
conf { |
| 310 |
groups = "sdio0_3_grp"; |
| 311 |
slew-rate = <SLEW_RATE_SLOW>; |
| 312 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 313 |
bias-disable; |
| 314 |
}; |
| 315 |
|
| 316 |
mux-cd { |
| 317 |
groups = "sdio0_cd_0_grp"; |
| 318 |
function = "sdio0_cd"; |
| 319 |
}; |
| 320 |
|
| 321 |
conf-cd { |
| 322 |
groups = "sdio0_cd_0_grp"; |
| 323 |
bias-high-impedance; |
| 324 |
bias-pull-up; |
| 325 |
slew-rate = <SLEW_RATE_SLOW>; |
| 326 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
pinctrl_sdhci1_default: sdhci1-default { |
| 331 |
mux { |
| 332 |
groups = "sdio1_2_grp"; |
| 333 |
function = "sdio1"; |
| 334 |
}; |
| 335 |
|
| 336 |
conf { |
| 337 |
groups = "sdio1_2_grp"; |
| 338 |
slew-rate = <SLEW_RATE_SLOW>; |
| 339 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 340 |
bias-disable; |
| 341 |
}; |
| 342 |
}; |
| 343 |
|
| 344 |
pinctrl_spi0_default: spi0-default { |
| 345 |
mux { |
| 346 |
groups = "spi0_3_grp"; |
| 347 |
function = "spi0"; |
| 348 |
}; |
| 349 |
|
| 350 |
conf { |
| 351 |
groups = "spi0_3_grp"; |
| 352 |
bias-disable; |
| 353 |
slew-rate = <SLEW_RATE_SLOW>; |
| 354 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 355 |
}; |
| 356 |
|
| 357 |
mux-cs { |
| 358 |
groups = "spi0_ss_9_grp"; |
| 359 |
function = "spi0_ss"; |
| 360 |
}; |
| 361 |
|
| 362 |
conf-cs { |
| 363 |
groups = "spi0_ss_9_grp"; |
| 364 |
bias-disable; |
| 365 |
}; |
| 366 |
|
| 367 |
}; |
| 368 |
|
| 369 |
pinctrl_spi1_default: spi1-default { |
| 370 |
mux { |
| 371 |
groups = "spi1_0_grp"; |
| 372 |
function = "spi1"; |
| 373 |
}; |
| 374 |
|
| 375 |
conf { |
| 376 |
groups = "spi1_0_grp"; |
| 377 |
bias-disable; |
| 378 |
slew-rate = <SLEW_RATE_SLOW>; |
| 379 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 380 |
}; |
| 381 |
|
| 382 |
mux-cs { |
| 383 |
groups = "spi1_ss_0_grp"; |
| 384 |
function = "spi1_ss"; |
| 385 |
}; |
| 386 |
|
| 387 |
conf-cs { |
| 388 |
groups = "spi1_ss_0_grp"; |
| 389 |
bias-disable; |
| 390 |
}; |
| 391 |
|
| 392 |
}; |
| 393 |
|
| 394 |
pinctrl_uart0_default: uart0-default { |
| 395 |
mux { |
| 396 |
groups = "uart0_0_grp"; |
| 397 |
function = "uart0"; |
| 398 |
}; |
| 399 |
|
| 400 |
conf { |
| 401 |
groups = "uart0_0_grp"; |
| 402 |
slew-rate = <SLEW_RATE_SLOW>; |
| 403 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 404 |
}; |
| 405 |
|
| 406 |
conf-rx { |
| 407 |
pins = "MIO3"; |
| 408 |
bias-high-impedance; |
| 409 |
}; |
| 410 |
|
| 411 |
conf-tx { |
| 412 |
pins = "MIO2"; |
| 413 |
bias-disable; |
| 414 |
}; |
| 415 |
}; |
| 416 |
|
| 417 |
pinctrl_uart1_default: uart1-default { |
| 418 |
mux { |
| 419 |
groups = "uart1_0_grp"; |
| 420 |
function = "uart1"; |
| 421 |
}; |
| 422 |
|
| 423 |
conf { |
| 424 |
groups = "uart1_0_grp"; |
| 425 |
slew-rate = <SLEW_RATE_SLOW>; |
| 426 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 427 |
}; |
| 428 |
|
| 429 |
conf-rx { |
| 430 |
pins = "MIO1"; |
| 431 |
bias-high-impedance; |
| 432 |
}; |
| 433 |
|
| 434 |
conf-tx { |
| 435 |
pins = "MIO0"; |
| 436 |
bias-disable; |
| 437 |
}; |
| 438 |
}; |
| 439 |
|
| 440 |
pinctrl_usb0_default: usb0-default { |
| 441 |
mux { |
| 442 |
groups = "usb0_0_grp"; |
| 443 |
function = "usb0"; |
| 444 |
}; |
| 445 |
|
| 446 |
conf { |
| 447 |
groups = "usb0_0_grp"; |
| 448 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 449 |
}; |
| 450 |
|
| 451 |
conf-rx { |
| 452 |
pins = "MIO52", "MIO53", "MIO55"; |
| 453 |
bias-high-impedance; |
| 454 |
drive-strength = <12>; |
| 455 |
slew-rate = <SLEW_RATE_FAST>; |
| 456 |
}; |
| 457 |
|
| 458 |
conf-tx { |
| 459 |
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", |
| 460 |
"MIO60", "MIO61", "MIO62", "MIO63"; |
| 461 |
bias-disable; |
| 462 |
drive-strength = <4>; |
| 463 |
slew-rate = <SLEW_RATE_SLOW>; |
| 464 |
}; |
| 465 |
}; |
| 466 |
|
| 467 |
pinctrl_usb1_default: usb1-default { |
| 468 |
mux { |
| 469 |
groups = "usb1_0_grp"; |
| 470 |
function = "usb1"; |
| 471 |
}; |
| 472 |
|
| 473 |
conf { |
| 474 |
groups = "usb1_0_grp"; |
| 475 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 476 |
}; |
| 477 |
|
| 478 |
conf-rx { |
| 479 |
pins = "MIO64", "MIO65", "MIO67"; |
| 480 |
bias-high-impedance; |
| 481 |
drive-strength = <12>; |
| 482 |
slew-rate = <SLEW_RATE_FAST>; |
| 483 |
}; |
| 484 |
|
| 485 |
conf-tx { |
| 486 |
pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", |
| 487 |
"MIO72", "MIO73", "MIO74", "MIO75"; |
| 488 |
bias-disable; |
| 489 |
drive-strength = <4>; |
| 490 |
slew-rate = <SLEW_RATE_SLOW>; |
| 491 |
}; |
| 492 |
}; |
| 493 |
}; |
| 494 |
|
| 495 |
&psgtr { |
| 496 |
status = "okay"; |
| 497 |
/* usb3, dp */ |
| 498 |
clocks = <&si5335_0>, <&si5335_1>; |
| 499 |
clock-names = "ref0", "ref1"; |
| 500 |
}; |
| 501 |
|
| 502 |
&rtc { |
| 503 |
status = "okay"; |
| 504 |
}; |
| 505 |
|
| 506 |
/* SD0 only supports 3.3V, no level shifter */ |
| 507 |
&sdhci0 { |
| 508 |
status = "okay"; |
| 509 |
no-1-8-v; |
| 510 |
disable-wp; |
| 511 |
pinctrl-names = "default"; |
| 512 |
pinctrl-0 = <&pinctrl_sdhci0_default>; |
| 513 |
xlnx,mio-bank = <0>; |
| 514 |
}; |
| 515 |
|
| 516 |
&sdhci1 { |
| 517 |
status = "okay"; |
| 518 |
bus-width = <0x4>; |
| 519 |
pinctrl-names = "default"; |
| 520 |
pinctrl-0 = <&pinctrl_sdhci1_default>; |
| 521 |
xlnx,mio-bank = <0>; |
| 522 |
non-removable; |
| 523 |
disable-wp; |
| 524 |
no-sd; |
| 525 |
no-sdio; |
| 526 |
cap-mmc-hw-reset; |
| 527 |
cap-power-off-card; |
| 528 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 529 |
vqmmc-supply = <&wmmcsdio_fixed>; |
| 530 |
#address-cells = <1>; |
| 531 |
#size-cells = <0>; |
| 532 |
wlcore: wifi@2 { |
| 533 |
compatible = "ti,wl1831"; |
| 534 |
reg = <2>; |
| 535 |
interrupt-parent = <&gpio>; |
| 536 |
interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */ |
| 537 |
}; |
| 538 |
}; |
| 539 |
|
| 540 |
&spi0 { /* Low Speed connector */ |
| 541 |
status = "okay"; |
| 542 |
label = "LS-SPI0"; |
| 543 |
num-cs = <1>; |
| 544 |
pinctrl-names = "default"; |
| 545 |
pinctrl-0 = <&pinctrl_spi0_default>; |
| 546 |
}; |
| 547 |
|
| 548 |
&spi1 { /* High Speed connector */ |
| 549 |
status = "okay"; |
| 550 |
label = "HS-SPI1"; |
| 551 |
num-cs = <1>; |
| 552 |
pinctrl-names = "default"; |
| 553 |
pinctrl-0 = <&pinctrl_spi1_default>; |
| 554 |
}; |
| 555 |
|
| 556 |
&uart0 { |
| 557 |
status = "okay"; |
| 558 |
pinctrl-names = "default"; |
| 559 |
pinctrl-0 = <&pinctrl_uart0_default>; |
| 560 |
bluetooth { |
| 561 |
compatible = "ti,wl1831-st"; |
| 562 |
enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; |
| 563 |
}; |
| 564 |
}; |
| 565 |
|
| 566 |
&uart1 { |
| 567 |
status = "okay"; |
| 568 |
pinctrl-names = "default"; |
| 569 |
pinctrl-0 = <&pinctrl_uart1_default>; |
| 570 |
}; |
| 571 |
|
| 572 |
/* ULPI SMSC USB3320 */ |
| 573 |
&usb0 { |
| 574 |
status = "okay"; |
| 575 |
pinctrl-names = "default"; |
| 576 |
pinctrl-0 = <&pinctrl_usb0_default>; |
| 577 |
phy-names = "usb3-phy"; |
| 578 |
phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; |
| 579 |
/delete-property/ reset-gpios; |
| 580 |
}; |
| 581 |
|
| 582 |
&dwc3_0 { |
| 583 |
status = "okay"; |
| 584 |
dr_mode = "peripheral"; |
| 585 |
maximum-speed = "super-speed"; |
| 586 |
}; |
| 587 |
|
| 588 |
/* ULPI SMSC USB3320 */ |
| 589 |
&usb1 { |
| 590 |
status = "okay"; |
| 591 |
pinctrl-names = "default"; |
| 592 |
pinctrl-0 = <&pinctrl_usb1_default>; |
| 593 |
phy-names = "usb3-phy"; |
| 594 |
phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; |
| 595 |
reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>; |
| 596 |
}; |
| 597 |
|
| 598 |
&dwc3_1 { |
| 599 |
status = "okay"; |
| 600 |
dr_mode = "host"; |
| 601 |
maximum-speed = "super-speed"; |
| 602 |
}; |
| 603 |
|
| 604 |
&watchdog0 { |
| 605 |
status = "okay"; |
| 606 |
}; |
| 607 |
|
| 608 |
&ams_ps { |
| 609 |
status = "okay"; |
| 610 |
}; |
| 611 |
|
| 612 |
&zynqmp_dpdma { |
| 613 |
status = "okay"; |
| 614 |
}; |
| 615 |
|
| 616 |
&zynqmp_dpsub { |
| 617 |
status = "okay"; |
| 618 |
phy-names = "dp-phy0", "dp-phy1"; |
| 619 |
phys = <&psgtr 1 PHY_TYPE_DP 0 1>, |
| 620 |
<&psgtr 0 PHY_TYPE_DP 1 1>; |
| 621 |
}; |
| 622 |
|
| 623 |
&out_dp { |
| 624 |
dpsub_dp_out: endpoint { |
| 625 |
remote-endpoint = <&dpcon_in>; |
| 626 |
}; |
| 627 |
}; |