| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* dts file for Xilinx ZynqMP zc1751-xm016-dc2 |
| 4 |
* |
| 5 |
* (C) Copyright 2015 - 2022, Xilinx, Inc. |
| 6 |
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. |
| 7 |
* |
| 8 |
* Michal Simek <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include "zynqmp.dtsi" |
| 14 |
#include "zynqmp-clk-ccf.dtsi" |
| 15 |
#include <dt-bindings/gpio/gpio.h> |
| 16 |
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "ZynqMP zc1751-xm016-dc2 RevA"; |
| 20 |
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
ethernet0 = &gem2; |
| 24 |
i2c0 = &i2c0; |
| 25 |
rtc0 = &rtc; |
| 26 |
serial0 = &uart0; |
| 27 |
serial1 = &uart1; |
| 28 |
spi0 = &spi0; |
| 29 |
spi1 = &spi1; |
| 30 |
usb0 = &usb1; |
| 31 |
}; |
| 32 |
|
| 33 |
chosen { |
| 34 |
bootargs = "earlycon"; |
| 35 |
stdout-path = "serial0:115200n8"; |
| 36 |
}; |
| 37 |
|
| 38 |
memory@0 { |
| 39 |
device_type = "memory"; |
| 40 |
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
&can0 { |
| 45 |
status = "okay"; |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&pinctrl_can0_default>; |
| 48 |
}; |
| 49 |
|
| 50 |
&can1 { |
| 51 |
status = "okay"; |
| 52 |
pinctrl-names = "default"; |
| 53 |
pinctrl-0 = <&pinctrl_can1_default>; |
| 54 |
}; |
| 55 |
|
| 56 |
&fpd_dma_chan1 { |
| 57 |
status = "okay"; |
| 58 |
}; |
| 59 |
|
| 60 |
&fpd_dma_chan2 { |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
|
| 64 |
&fpd_dma_chan3 { |
| 65 |
status = "okay"; |
| 66 |
}; |
| 67 |
|
| 68 |
&fpd_dma_chan4 { |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
&fpd_dma_chan5 { |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&fpd_dma_chan6 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
&fpd_dma_chan7 { |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
&fpd_dma_chan8 { |
| 85 |
status = "okay"; |
| 86 |
}; |
| 87 |
|
| 88 |
&gem2 { |
| 89 |
status = "okay"; |
| 90 |
phy-handle = <&phy0>; |
| 91 |
phy-mode = "rgmii-id"; |
| 92 |
pinctrl-names = "default"; |
| 93 |
pinctrl-0 = <&pinctrl_gem2_default>; |
| 94 |
mdio: mdio { |
| 95 |
#address-cells = <1>; |
| 96 |
#size-cells = <0>; |
| 97 |
phy0: ethernet-phy@5 { |
| 98 |
reg = <5>; |
| 99 |
ti,rx-internal-delay = <0x8>; |
| 100 |
ti,tx-internal-delay = <0xa>; |
| 101 |
ti,fifo-depth = <0x1>; |
| 102 |
ti,dp83867-rxctrl-strap-quirk; |
| 103 |
}; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&gpio { |
| 108 |
status = "okay"; |
| 109 |
}; |
| 110 |
|
| 111 |
&i2c0 { |
| 112 |
status = "okay"; |
| 113 |
clock-frequency = <400000>; |
| 114 |
pinctrl-names = "default", "gpio"; |
| 115 |
pinctrl-0 = <&pinctrl_i2c0_default>; |
| 116 |
pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| 117 |
scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 118 |
sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 119 |
|
| 120 |
tca6416_u26: gpio@20 { |
| 121 |
compatible = "ti,tca6416"; |
| 122 |
reg = <0x20>; |
| 123 |
gpio-controller; |
| 124 |
#gpio-cells = <2>; |
| 125 |
/* IRQ not connected */ |
| 126 |
}; |
| 127 |
|
| 128 |
rtc@68 { |
| 129 |
compatible = "dallas,ds1339"; |
| 130 |
reg = <0x68>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
&nand0 { |
| 135 |
status = "okay"; |
| 136 |
pinctrl-names = "default"; |
| 137 |
pinctrl-0 = <&pinctrl_nand0_default>; |
| 138 |
|
| 139 |
nand@0 { |
| 140 |
reg = <0x0>; |
| 141 |
#address-cells = <0x2>; |
| 142 |
#size-cells = <0x1>; |
| 143 |
nand-ecc-mode = "soft"; |
| 144 |
nand-ecc-algo = "bch"; |
| 145 |
nand-rb = <0>; |
| 146 |
label = "main-storage-0"; |
| 147 |
}; |
| 148 |
nand@1 { |
| 149 |
reg = <0x1>; |
| 150 |
#address-cells = <0x2>; |
| 151 |
#size-cells = <0x1>; |
| 152 |
nand-ecc-mode = "soft"; |
| 153 |
nand-ecc-algo = "bch"; |
| 154 |
nand-rb = <0>; |
| 155 |
label = "main-storage-1"; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
&pinctrl0 { |
| 160 |
status = "okay"; |
| 161 |
pinctrl_can0_default: can0-default { |
| 162 |
mux { |
| 163 |
function = "can0"; |
| 164 |
groups = "can0_9_grp"; |
| 165 |
}; |
| 166 |
|
| 167 |
conf { |
| 168 |
groups = "can0_9_grp"; |
| 169 |
slew-rate = <SLEW_RATE_SLOW>; |
| 170 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 171 |
}; |
| 172 |
|
| 173 |
conf-rx { |
| 174 |
pins = "MIO38"; |
| 175 |
bias-high-impedance; |
| 176 |
}; |
| 177 |
|
| 178 |
conf-tx { |
| 179 |
pins = "MIO39"; |
| 180 |
bias-disable; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
pinctrl_can1_default: can1-default { |
| 185 |
mux { |
| 186 |
function = "can1"; |
| 187 |
groups = "can1_8_grp"; |
| 188 |
}; |
| 189 |
|
| 190 |
conf { |
| 191 |
groups = "can1_8_grp"; |
| 192 |
slew-rate = <SLEW_RATE_SLOW>; |
| 193 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 194 |
}; |
| 195 |
|
| 196 |
conf-rx { |
| 197 |
pins = "MIO33"; |
| 198 |
bias-high-impedance; |
| 199 |
}; |
| 200 |
|
| 201 |
conf-tx { |
| 202 |
pins = "MIO32"; |
| 203 |
bias-disable; |
| 204 |
}; |
| 205 |
}; |
| 206 |
|
| 207 |
pinctrl_i2c0_default: i2c0-default { |
| 208 |
mux { |
| 209 |
groups = "i2c0_1_grp"; |
| 210 |
function = "i2c0"; |
| 211 |
}; |
| 212 |
|
| 213 |
conf { |
| 214 |
groups = "i2c0_1_grp"; |
| 215 |
bias-pull-up; |
| 216 |
slew-rate = <SLEW_RATE_SLOW>; |
| 217 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
pinctrl_i2c0_gpio: i2c0-gpio-grp { |
| 222 |
mux { |
| 223 |
groups = "gpio0_6_grp", "gpio0_7_grp"; |
| 224 |
function = "gpio0"; |
| 225 |
}; |
| 226 |
|
| 227 |
conf { |
| 228 |
groups = "gpio0_6_grp", "gpio0_7_grp"; |
| 229 |
slew-rate = <SLEW_RATE_SLOW>; |
| 230 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
pinctrl_uart0_default: uart0-default { |
| 235 |
mux { |
| 236 |
groups = "uart0_10_grp"; |
| 237 |
function = "uart0"; |
| 238 |
}; |
| 239 |
|
| 240 |
conf { |
| 241 |
groups = "uart0_10_grp"; |
| 242 |
slew-rate = <SLEW_RATE_SLOW>; |
| 243 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 244 |
}; |
| 245 |
|
| 246 |
conf-rx { |
| 247 |
pins = "MIO42"; |
| 248 |
bias-high-impedance; |
| 249 |
}; |
| 250 |
|
| 251 |
conf-tx { |
| 252 |
pins = "MIO43"; |
| 253 |
bias-disable; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
pinctrl_uart1_default: uart1-default { |
| 258 |
mux { |
| 259 |
groups = "uart1_10_grp"; |
| 260 |
function = "uart1"; |
| 261 |
}; |
| 262 |
|
| 263 |
conf { |
| 264 |
groups = "uart1_10_grp"; |
| 265 |
slew-rate = <SLEW_RATE_SLOW>; |
| 266 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 267 |
}; |
| 268 |
|
| 269 |
conf-rx { |
| 270 |
pins = "MIO41"; |
| 271 |
bias-high-impedance; |
| 272 |
}; |
| 273 |
|
| 274 |
conf-tx { |
| 275 |
pins = "MIO40"; |
| 276 |
bias-disable; |
| 277 |
}; |
| 278 |
}; |
| 279 |
|
| 280 |
pinctrl_usb1_default: usb1-default { |
| 281 |
mux { |
| 282 |
groups = "usb1_0_grp"; |
| 283 |
function = "usb1"; |
| 284 |
}; |
| 285 |
|
| 286 |
conf { |
| 287 |
groups = "usb1_0_grp"; |
| 288 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 289 |
}; |
| 290 |
|
| 291 |
conf-rx { |
| 292 |
pins = "MIO64", "MIO65", "MIO67"; |
| 293 |
bias-high-impedance; |
| 294 |
drive-strength = <12>; |
| 295 |
slew-rate = <SLEW_RATE_FAST>; |
| 296 |
}; |
| 297 |
|
| 298 |
conf-tx { |
| 299 |
pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", |
| 300 |
"MIO72", "MIO73", "MIO74", "MIO75"; |
| 301 |
bias-disable; |
| 302 |
drive-strength = <4>; |
| 303 |
slew-rate = <SLEW_RATE_SLOW>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
pinctrl_gem2_default: gem2-default { |
| 308 |
mux { |
| 309 |
function = "ethernet2"; |
| 310 |
groups = "ethernet2_0_grp"; |
| 311 |
}; |
| 312 |
|
| 313 |
conf { |
| 314 |
groups = "ethernet2_0_grp"; |
| 315 |
slew-rate = <SLEW_RATE_SLOW>; |
| 316 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 317 |
}; |
| 318 |
|
| 319 |
conf-rx { |
| 320 |
pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", |
| 321 |
"MIO63"; |
| 322 |
bias-high-impedance; |
| 323 |
low-power-disable; |
| 324 |
}; |
| 325 |
|
| 326 |
conf-tx { |
| 327 |
pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56", |
| 328 |
"MIO57"; |
| 329 |
bias-disable; |
| 330 |
low-power-enable; |
| 331 |
}; |
| 332 |
|
| 333 |
mux-mdio { |
| 334 |
function = "mdio2"; |
| 335 |
groups = "mdio2_0_grp"; |
| 336 |
}; |
| 337 |
|
| 338 |
conf-mdio { |
| 339 |
groups = "mdio2_0_grp"; |
| 340 |
slew-rate = <SLEW_RATE_SLOW>; |
| 341 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 342 |
bias-disable; |
| 343 |
}; |
| 344 |
}; |
| 345 |
|
| 346 |
pinctrl_nand0_default: nand0-default { |
| 347 |
mux { |
| 348 |
groups = "nand0_0_grp"; |
| 349 |
function = "nand0"; |
| 350 |
}; |
| 351 |
|
| 352 |
conf { |
| 353 |
groups = "nand0_0_grp"; |
| 354 |
bias-pull-up; |
| 355 |
}; |
| 356 |
|
| 357 |
mux-ce { |
| 358 |
groups = "nand0_ce_0_grp"; |
| 359 |
function = "nand0_ce"; |
| 360 |
}; |
| 361 |
|
| 362 |
conf-ce { |
| 363 |
groups = "nand0_ce_0_grp"; |
| 364 |
bias-pull-up; |
| 365 |
}; |
| 366 |
|
| 367 |
mux-rb { |
| 368 |
groups = "nand0_rb_0_grp"; |
| 369 |
function = "nand0_rb"; |
| 370 |
}; |
| 371 |
|
| 372 |
conf-rb { |
| 373 |
groups = "nand0_rb_0_grp"; |
| 374 |
bias-pull-up; |
| 375 |
}; |
| 376 |
|
| 377 |
mux-dqs { |
| 378 |
groups = "nand0_dqs_0_grp"; |
| 379 |
function = "nand0_dqs"; |
| 380 |
}; |
| 381 |
|
| 382 |
conf-dqs { |
| 383 |
groups = "nand0_dqs_0_grp"; |
| 384 |
bias-pull-up; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
pinctrl_spi0_default: spi0-default { |
| 389 |
mux { |
| 390 |
groups = "spi0_0_grp"; |
| 391 |
function = "spi0"; |
| 392 |
}; |
| 393 |
|
| 394 |
conf { |
| 395 |
groups = "spi0_0_grp"; |
| 396 |
bias-disable; |
| 397 |
slew-rate = <SLEW_RATE_SLOW>; |
| 398 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 399 |
}; |
| 400 |
|
| 401 |
mux-cs { |
| 402 |
groups = "spi0_ss_0_grp", "spi0_ss_1_grp", |
| 403 |
"spi0_ss_2_grp"; |
| 404 |
function = "spi0_ss"; |
| 405 |
}; |
| 406 |
|
| 407 |
conf-cs { |
| 408 |
groups = "spi0_ss_0_grp", "spi0_ss_1_grp", |
| 409 |
"spi0_ss_2_grp"; |
| 410 |
bias-disable; |
| 411 |
}; |
| 412 |
}; |
| 413 |
|
| 414 |
pinctrl_spi1_default: spi1-default { |
| 415 |
mux { |
| 416 |
groups = "spi1_3_grp"; |
| 417 |
function = "spi1"; |
| 418 |
}; |
| 419 |
|
| 420 |
conf { |
| 421 |
groups = "spi1_3_grp"; |
| 422 |
bias-disable; |
| 423 |
slew-rate = <SLEW_RATE_SLOW>; |
| 424 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 425 |
}; |
| 426 |
|
| 427 |
mux-cs { |
| 428 |
groups = "spi1_ss_9_grp", "spi1_ss_10_grp", |
| 429 |
"spi1_ss_11_grp"; |
| 430 |
function = "spi1_ss"; |
| 431 |
}; |
| 432 |
|
| 433 |
conf-cs { |
| 434 |
groups = "spi1_ss_9_grp", "spi1_ss_10_grp", |
| 435 |
"spi1_ss_11_grp"; |
| 436 |
bias-disable; |
| 437 |
}; |
| 438 |
}; |
| 439 |
}; |
| 440 |
|
| 441 |
&rtc { |
| 442 |
status = "okay"; |
| 443 |
}; |
| 444 |
|
| 445 |
&spi0 { |
| 446 |
status = "okay"; |
| 447 |
num-cs = <1>; |
| 448 |
pinctrl-names = "default"; |
| 449 |
pinctrl-0 = <&pinctrl_spi0_default>; |
| 450 |
|
| 451 |
spi0_flash0: flash@0 { |
| 452 |
#address-cells = <1>; |
| 453 |
#size-cells = <1>; |
| 454 |
compatible = "sst,sst25wf080", "jedec,spi-nor"; |
| 455 |
spi-max-frequency = <50000000>; |
| 456 |
reg = <0>; |
| 457 |
|
| 458 |
partition@0 { |
| 459 |
label = "spi0-data"; |
| 460 |
reg = <0x0 0x100000>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
}; |
| 464 |
|
| 465 |
&spi1 { |
| 466 |
status = "okay"; |
| 467 |
num-cs = <1>; |
| 468 |
pinctrl-names = "default"; |
| 469 |
pinctrl-0 = <&pinctrl_spi1_default>; |
| 470 |
|
| 471 |
spi1_flash0: flash@0 { |
| 472 |
#address-cells = <1>; |
| 473 |
#size-cells = <1>; |
| 474 |
compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; |
| 475 |
spi-max-frequency = <20000000>; |
| 476 |
reg = <0>; |
| 477 |
|
| 478 |
partition@0 { |
| 479 |
label = "spi1-data"; |
| 480 |
reg = <0x0 0x84000>; |
| 481 |
}; |
| 482 |
}; |
| 483 |
}; |
| 484 |
|
| 485 |
/* ULPI SMSC USB3320 */ |
| 486 |
&usb1 { |
| 487 |
status = "okay"; |
| 488 |
pinctrl-names = "default"; |
| 489 |
pinctrl-0 = <&pinctrl_usb1_default>; |
| 490 |
}; |
| 491 |
|
| 492 |
&dwc3_1 { |
| 493 |
status = "okay"; |
| 494 |
dr_mode = "host"; |
| 495 |
}; |
| 496 |
|
| 497 |
&uart0 { |
| 498 |
status = "okay"; |
| 499 |
pinctrl-names = "default"; |
| 500 |
pinctrl-0 = <&pinctrl_uart0_default>; |
| 501 |
}; |
| 502 |
|
| 503 |
&uart1 { |
| 504 |
status = "okay"; |
| 505 |
pinctrl-names = "default"; |
| 506 |
pinctrl-0 = <&pinctrl_uart1_default>; |
| 507 |
}; |