| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* dts file for Xilinx ZynqMP zc1751-xm015-dc1 |
| 4 |
* |
| 5 |
* (C) Copyright 2015 - 2022, Xilinx, Inc. |
| 6 |
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. |
| 7 |
* |
| 8 |
* Michal Simek <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include "zynqmp.dtsi" |
| 14 |
#include "zynqmp-clk-ccf.dtsi" |
| 15 |
#include <dt-bindings/phy/phy.h> |
| 16 |
#include <dt-bindings/gpio/gpio.h> |
| 17 |
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| 18 |
|
| 19 |
/ { |
| 20 |
model = "ZynqMP zc1751-xm015-dc1 RevA"; |
| 21 |
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; |
| 22 |
|
| 23 |
aliases { |
| 24 |
ethernet0 = &gem3; |
| 25 |
i2c0 = &i2c1; |
| 26 |
mmc0 = &sdhci0; |
| 27 |
mmc1 = &sdhci1; |
| 28 |
rtc0 = &rtc; |
| 29 |
serial0 = &uart0; |
| 30 |
spi0 = &qspi; |
| 31 |
usb0 = &usb0; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
bootargs = "earlycon"; |
| 36 |
stdout-path = "serial0:115200n8"; |
| 37 |
}; |
| 38 |
|
| 39 |
memory@0 { |
| 40 |
device_type = "memory"; |
| 41 |
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; |
| 42 |
}; |
| 43 |
|
| 44 |
clock_si5338_0: clk27 { /* u55 SI5338-GM */ |
| 45 |
compatible = "fixed-clock"; |
| 46 |
#clock-cells = <0>; |
| 47 |
clock-frequency = <27000000>; |
| 48 |
}; |
| 49 |
|
| 50 |
clock_si5338_2: clk26 { |
| 51 |
compatible = "fixed-clock"; |
| 52 |
#clock-cells = <0>; |
| 53 |
clock-frequency = <26000000>; |
| 54 |
}; |
| 55 |
|
| 56 |
clock_si5338_3: clk150 { |
| 57 |
compatible = "fixed-clock"; |
| 58 |
#clock-cells = <0>; |
| 59 |
clock-frequency = <150000000>; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
&fpd_dma_chan1 { |
| 64 |
status = "okay"; |
| 65 |
}; |
| 66 |
|
| 67 |
&fpd_dma_chan2 { |
| 68 |
status = "okay"; |
| 69 |
}; |
| 70 |
|
| 71 |
&fpd_dma_chan3 { |
| 72 |
status = "okay"; |
| 73 |
}; |
| 74 |
|
| 75 |
&fpd_dma_chan4 { |
| 76 |
status = "okay"; |
| 77 |
}; |
| 78 |
|
| 79 |
&fpd_dma_chan5 { |
| 80 |
status = "okay"; |
| 81 |
}; |
| 82 |
|
| 83 |
&fpd_dma_chan6 { |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
&fpd_dma_chan7 { |
| 88 |
status = "okay"; |
| 89 |
}; |
| 90 |
|
| 91 |
&fpd_dma_chan8 { |
| 92 |
status = "okay"; |
| 93 |
}; |
| 94 |
|
| 95 |
&gem3 { |
| 96 |
status = "okay"; |
| 97 |
phy-handle = <&phy0>; |
| 98 |
phy-mode = "rgmii-id"; |
| 99 |
pinctrl-names = "default"; |
| 100 |
pinctrl-0 = <&pinctrl_gem3_default>; |
| 101 |
mdio: mdio { |
| 102 |
#address-cells = <1>; |
| 103 |
#size-cells = <0>; |
| 104 |
phy0: ethernet-phy@0 { |
| 105 |
reg = <0>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
&gpio { |
| 111 |
status = "okay"; |
| 112 |
pinctrl-names = "default"; |
| 113 |
pinctrl-0 = <&pinctrl_gpio_default>; |
| 114 |
}; |
| 115 |
|
| 116 |
&gpu { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&i2c1 { |
| 121 |
status = "okay"; |
| 122 |
clock-frequency = <400000>; |
| 123 |
pinctrl-names = "default", "gpio"; |
| 124 |
pinctrl-0 = <&pinctrl_i2c1_default>; |
| 125 |
pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 126 |
scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 127 |
sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 128 |
|
| 129 |
eeprom: eeprom@55 { |
| 130 |
compatible = "atmel,24c64"; /* 24AA64 */ |
| 131 |
reg = <0x55>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
&pinctrl0 { |
| 136 |
status = "okay"; |
| 137 |
pinctrl_i2c1_default: i2c1-default { |
| 138 |
mux { |
| 139 |
groups = "i2c1_9_grp"; |
| 140 |
function = "i2c1"; |
| 141 |
}; |
| 142 |
|
| 143 |
conf { |
| 144 |
groups = "i2c1_9_grp"; |
| 145 |
bias-pull-up; |
| 146 |
slew-rate = <SLEW_RATE_SLOW>; |
| 147 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
pinctrl_i2c1_gpio: i2c1-gpio-grp { |
| 152 |
mux { |
| 153 |
groups = "gpio0_36_grp", "gpio0_37_grp"; |
| 154 |
function = "gpio0"; |
| 155 |
}; |
| 156 |
|
| 157 |
conf { |
| 158 |
groups = "gpio0_36_grp", "gpio0_37_grp"; |
| 159 |
slew-rate = <SLEW_RATE_SLOW>; |
| 160 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
pinctrl_uart0_default: uart0-default { |
| 165 |
mux { |
| 166 |
groups = "uart0_8_grp"; |
| 167 |
function = "uart0"; |
| 168 |
}; |
| 169 |
|
| 170 |
conf { |
| 171 |
groups = "uart0_8_grp"; |
| 172 |
slew-rate = <SLEW_RATE_SLOW>; |
| 173 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 174 |
}; |
| 175 |
|
| 176 |
conf-rx { |
| 177 |
pins = "MIO34"; |
| 178 |
bias-high-impedance; |
| 179 |
}; |
| 180 |
|
| 181 |
conf-tx { |
| 182 |
pins = "MIO35"; |
| 183 |
bias-disable; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
pinctrl_usb0_default: usb0-default { |
| 188 |
mux { |
| 189 |
groups = "usb0_0_grp"; |
| 190 |
function = "usb0"; |
| 191 |
}; |
| 192 |
|
| 193 |
conf { |
| 194 |
groups = "usb0_0_grp"; |
| 195 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 196 |
}; |
| 197 |
|
| 198 |
conf-rx { |
| 199 |
pins = "MIO52", "MIO53", "MIO55"; |
| 200 |
bias-high-impedance; |
| 201 |
drive-strength = <12>; |
| 202 |
slew-rate = <SLEW_RATE_FAST>; |
| 203 |
}; |
| 204 |
|
| 205 |
conf-tx { |
| 206 |
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", |
| 207 |
"MIO60", "MIO61", "MIO62", "MIO63"; |
| 208 |
bias-disable; |
| 209 |
drive-strength = <4>; |
| 210 |
slew-rate = <SLEW_RATE_SLOW>; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
pinctrl_gem3_default: gem3-default { |
| 215 |
mux { |
| 216 |
function = "ethernet3"; |
| 217 |
groups = "ethernet3_0_grp"; |
| 218 |
}; |
| 219 |
|
| 220 |
conf { |
| 221 |
groups = "ethernet3_0_grp"; |
| 222 |
slew-rate = <SLEW_RATE_SLOW>; |
| 223 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 224 |
}; |
| 225 |
|
| 226 |
conf-rx { |
| 227 |
pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", |
| 228 |
"MIO75"; |
| 229 |
bias-high-impedance; |
| 230 |
low-power-disable; |
| 231 |
}; |
| 232 |
|
| 233 |
conf-tx { |
| 234 |
pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", |
| 235 |
"MIO69"; |
| 236 |
bias-disable; |
| 237 |
low-power-enable; |
| 238 |
}; |
| 239 |
|
| 240 |
mux-mdio { |
| 241 |
function = "mdio3"; |
| 242 |
groups = "mdio3_0_grp"; |
| 243 |
}; |
| 244 |
|
| 245 |
conf-mdio { |
| 246 |
groups = "mdio3_0_grp"; |
| 247 |
slew-rate = <SLEW_RATE_SLOW>; |
| 248 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 249 |
bias-disable; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
pinctrl_sdhci0_default: sdhci0-default { |
| 254 |
mux { |
| 255 |
groups = "sdio0_0_grp"; |
| 256 |
function = "sdio0"; |
| 257 |
}; |
| 258 |
|
| 259 |
conf { |
| 260 |
groups = "sdio0_0_grp"; |
| 261 |
slew-rate = <SLEW_RATE_SLOW>; |
| 262 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 263 |
bias-disable; |
| 264 |
}; |
| 265 |
|
| 266 |
mux-cd { |
| 267 |
groups = "sdio0_cd_0_grp"; |
| 268 |
function = "sdio0_cd"; |
| 269 |
}; |
| 270 |
|
| 271 |
conf-cd { |
| 272 |
groups = "sdio0_cd_0_grp"; |
| 273 |
bias-high-impedance; |
| 274 |
bias-pull-up; |
| 275 |
slew-rate = <SLEW_RATE_SLOW>; |
| 276 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 277 |
}; |
| 278 |
|
| 279 |
mux-wp { |
| 280 |
groups = "sdio0_wp_0_grp"; |
| 281 |
function = "sdio0_wp"; |
| 282 |
}; |
| 283 |
|
| 284 |
conf-wp { |
| 285 |
groups = "sdio0_wp_0_grp"; |
| 286 |
bias-high-impedance; |
| 287 |
bias-pull-up; |
| 288 |
slew-rate = <SLEW_RATE_SLOW>; |
| 289 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
pinctrl_sdhci1_default: sdhci1-default { |
| 294 |
mux { |
| 295 |
groups = "sdio1_0_grp"; |
| 296 |
function = "sdio1"; |
| 297 |
}; |
| 298 |
|
| 299 |
conf { |
| 300 |
groups = "sdio1_0_grp"; |
| 301 |
slew-rate = <SLEW_RATE_SLOW>; |
| 302 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 303 |
bias-disable; |
| 304 |
}; |
| 305 |
|
| 306 |
mux-cd { |
| 307 |
groups = "sdio1_cd_0_grp"; |
| 308 |
function = "sdio1_cd"; |
| 309 |
}; |
| 310 |
|
| 311 |
conf-cd { |
| 312 |
groups = "sdio1_cd_0_grp"; |
| 313 |
bias-high-impedance; |
| 314 |
bias-pull-up; |
| 315 |
slew-rate = <SLEW_RATE_SLOW>; |
| 316 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 317 |
}; |
| 318 |
|
| 319 |
mux-wp { |
| 320 |
groups = "sdio1_wp_0_grp"; |
| 321 |
function = "sdio1_wp"; |
| 322 |
}; |
| 323 |
|
| 324 |
conf-wp { |
| 325 |
groups = "sdio1_wp_0_grp"; |
| 326 |
bias-high-impedance; |
| 327 |
bias-pull-up; |
| 328 |
slew-rate = <SLEW_RATE_SLOW>; |
| 329 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 330 |
}; |
| 331 |
}; |
| 332 |
|
| 333 |
pinctrl_gpio_default: gpio-default { |
| 334 |
mux { |
| 335 |
function = "gpio0"; |
| 336 |
groups = "gpio0_38_grp"; |
| 337 |
}; |
| 338 |
|
| 339 |
conf { |
| 340 |
groups = "gpio0_38_grp"; |
| 341 |
bias-disable; |
| 342 |
slew-rate = <SLEW_RATE_SLOW>; |
| 343 |
power-source = <IO_STANDARD_LVCMOS18>; |
| 344 |
}; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
&psgtr { |
| 349 |
status = "okay"; |
| 350 |
/* dp, usb3, sata */ |
| 351 |
clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>; |
| 352 |
clock-names = "ref1", "ref2", "ref3"; |
| 353 |
}; |
| 354 |
|
| 355 |
&qspi { |
| 356 |
status = "okay"; |
| 357 |
flash@0 { |
| 358 |
compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */ |
| 359 |
#address-cells = <1>; |
| 360 |
#size-cells = <1>; |
| 361 |
reg = <0x0>; |
| 362 |
spi-tx-bus-width = <4>; |
| 363 |
spi-rx-bus-width = <4>; |
| 364 |
spi-max-frequency = <108000000>; /* Based on DC1 spec */ |
| 365 |
}; |
| 366 |
}; |
| 367 |
|
| 368 |
&rtc { |
| 369 |
status = "okay"; |
| 370 |
}; |
| 371 |
|
| 372 |
&sata { |
| 373 |
status = "okay"; |
| 374 |
/* SATA phy OOB timing settings */ |
| 375 |
ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; |
| 376 |
ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; |
| 377 |
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; |
| 378 |
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; |
| 379 |
ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; |
| 380 |
ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; |
| 381 |
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; |
| 382 |
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; |
| 383 |
phy-names = "sata-phy"; |
| 384 |
phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; |
| 385 |
}; |
| 386 |
|
| 387 |
/* eMMC */ |
| 388 |
&sdhci0 { |
| 389 |
status = "okay"; |
| 390 |
pinctrl-names = "default"; |
| 391 |
pinctrl-0 = <&pinctrl_sdhci0_default>; |
| 392 |
bus-width = <8>; |
| 393 |
xlnx,mio-bank = <0>; |
| 394 |
}; |
| 395 |
|
| 396 |
/* SD1 with level shifter */ |
| 397 |
&sdhci1 { |
| 398 |
status = "okay"; |
| 399 |
/* |
| 400 |
* This property should be removed for supporting UHS mode |
| 401 |
*/ |
| 402 |
no-1-8-v; |
| 403 |
pinctrl-names = "default"; |
| 404 |
pinctrl-0 = <&pinctrl_sdhci1_default>; |
| 405 |
xlnx,mio-bank = <1>; |
| 406 |
}; |
| 407 |
|
| 408 |
&uart0 { |
| 409 |
status = "okay"; |
| 410 |
pinctrl-names = "default"; |
| 411 |
pinctrl-0 = <&pinctrl_uart0_default>; |
| 412 |
}; |
| 413 |
|
| 414 |
/* ULPI SMSC USB3320 */ |
| 415 |
&usb0 { |
| 416 |
status = "okay"; |
| 417 |
pinctrl-names = "default"; |
| 418 |
pinctrl-0 = <&pinctrl_usb0_default>; |
| 419 |
phy-names = "usb3-phy"; |
| 420 |
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; |
| 421 |
}; |
| 422 |
|
| 423 |
&dwc3_0 { |
| 424 |
status = "okay"; |
| 425 |
dr_mode = "host"; |
| 426 |
snps,usb3_lpm_capable; |
| 427 |
maximum-speed = "super-speed"; |
| 428 |
}; |
| 429 |
|
| 430 |
&zynqmp_dpdma { |
| 431 |
status = "okay"; |
| 432 |
}; |
| 433 |
|
| 434 |
&zynqmp_dpsub { |
| 435 |
status = "okay"; |
| 436 |
phy-names = "dp-phy0", "dp-phy1"; |
| 437 |
phys = <&psgtr 1 PHY_TYPE_DP 0 0>, |
| 438 |
<&psgtr 0 PHY_TYPE_DP 1 1>; |
| 439 |
}; |