| 1 |
/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ |
| 2 |
/** |
| 3 |
* DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with |
| 4 |
* J784S4 EVM. The Add-On Ethernet Card has to be connected to ENET Expansion 1 slot on the |
| 5 |
* board. |
| 6 |
* |
| 7 |
* Product Datasheet: https://www.ti.com/lit/ug/spruj74/spruj74.pdf |
| 8 |
* |
| 9 |
* Link to QSGMII Daughtercard: https://www.ti.com/tool/J721EXENETXPANEVM |
| 10 |
* |
| 11 |
* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 12 |
*/ |
| 13 |
|
| 14 |
/dts-v1/; |
| 15 |
/plugin/; |
| 16 |
|
| 17 |
#include <dt-bindings/gpio/gpio.h> |
| 18 |
#include <dt-bindings/phy/phy-cadence.h> |
| 19 |
#include <dt-bindings/phy/phy.h> |
| 20 |
|
| 21 |
#include "k3-pinctrl.h" |
| 22 |
#include "k3-serdes.h" |
| 23 |
|
| 24 |
&{/} { |
| 25 |
aliases { |
| 26 |
ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@5"; |
| 27 |
ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@6"; |
| 28 |
ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@7"; |
| 29 |
ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@8"; |
| 30 |
ethernet5 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1"; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
&main_cpsw0 { |
| 35 |
status = "okay"; |
| 36 |
}; |
| 37 |
|
| 38 |
&main_cpsw0_port5 { |
| 39 |
phy-handle = <&cpsw9g_phy1>; |
| 40 |
phy-mode = "qsgmii"; |
| 41 |
mac-address = [00 00 00 00 00 00]; |
| 42 |
phys = <&cpsw0_phy_gmii_sel 5>, <&serdes2_qsgmii_link>; |
| 43 |
phy-names = "mac", "serdes"; |
| 44 |
status = "okay"; |
| 45 |
}; |
| 46 |
|
| 47 |
&main_cpsw0_port6 { |
| 48 |
phy-handle = <&cpsw9g_phy2>; |
| 49 |
phy-mode = "qsgmii"; |
| 50 |
mac-address = [00 00 00 00 00 00]; |
| 51 |
phys = <&cpsw0_phy_gmii_sel 6>, <&serdes2_qsgmii_link>; |
| 52 |
phy-names = "mac", "serdes"; |
| 53 |
status = "okay"; |
| 54 |
}; |
| 55 |
|
| 56 |
&main_cpsw0_port7 { |
| 57 |
phy-handle = <&cpsw9g_phy0>; |
| 58 |
phy-mode = "qsgmii"; |
| 59 |
mac-address = [00 00 00 00 00 00]; |
| 60 |
phys = <&cpsw0_phy_gmii_sel 7>, <&serdes2_qsgmii_link>; |
| 61 |
phy-names = "mac", "serdes"; |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
|
| 65 |
&main_cpsw0_port8 { |
| 66 |
phy-handle = <&cpsw9g_phy3>; |
| 67 |
phy-mode = "qsgmii"; |
| 68 |
mac-address = [00 00 00 00 00 00]; |
| 69 |
phys = <&cpsw0_phy_gmii_sel 8>, <&serdes2_qsgmii_link>; |
| 70 |
phy-names = "mac", "serdes"; |
| 71 |
status = "okay"; |
| 72 |
}; |
| 73 |
|
| 74 |
&main_cpsw0_mdio { |
| 75 |
pinctrl-names = "default"; |
| 76 |
pinctrl-0 = <&mdio0_default_pins>; |
| 77 |
bus_freq = <1000000>; |
| 78 |
reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>; |
| 79 |
reset-post-delay-us = <120000>; |
| 80 |
#address-cells = <1>; |
| 81 |
#size-cells = <0>; |
| 82 |
status = "okay"; |
| 83 |
|
| 84 |
cpsw9g_phy0: ethernet-phy@16 { |
| 85 |
reg = <16>; |
| 86 |
}; |
| 87 |
cpsw9g_phy1: ethernet-phy@17 { |
| 88 |
reg = <17>; |
| 89 |
}; |
| 90 |
cpsw9g_phy2: ethernet-phy@18 { |
| 91 |
reg = <18>; |
| 92 |
}; |
| 93 |
cpsw9g_phy3: ethernet-phy@19 { |
| 94 |
reg = <19>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
&exp2 { |
| 99 |
/* Power-up ENET1 EXPANDER PHY. */ |
| 100 |
qsgmii-line-hog { |
| 101 |
gpio-hog; |
| 102 |
gpios = <16 GPIO_ACTIVE_HIGH>; |
| 103 |
output-low; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&main_pmx0 { |
| 108 |
mdio0_default_pins: mdio0-default-pins { |
| 109 |
pinctrl-single,pins = < |
| 110 |
J784S4_IOPAD(0x05c, PIN_INPUT, 4) /* (AC36) MCASP2_AXR0.MDIO1_MDIO */ |
| 111 |
J784S4_IOPAD(0x058, PIN_INPUT, 4) /* (AE37) MCASP2_AFSX.MDIO1_MDC */ |
| 112 |
>; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
&serdes_ln_ctrl { |
| 117 |
idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, |
| 118 |
<J784S4_SERDES0_LANE2_IP3_UNUSED>, <J784S4_SERDES0_LANE3_USB>, |
| 119 |
<J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, |
| 120 |
<J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>, |
| 121 |
<J784S4_SERDES2_LANE0_QSGMII_LANE5>, <J784S4_SERDES2_LANE1_QSGMII_LANE6>, |
| 122 |
<J784S4_SERDES2_LANE2_QSGMII_LANE7>, <J784S4_SERDES2_LANE3_QSGMII_LANE8>; |
| 123 |
}; |
| 124 |
|
| 125 |
&serdes_wiz2 { |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&serdes2 { |
| 130 |
#address-cells = <1>; |
| 131 |
#size-cells = <0>; |
| 132 |
status = "okay"; |
| 133 |
serdes2_qsgmii_link: phy@0 { |
| 134 |
reg = <2>; |
| 135 |
cdns,num-lanes = <1>; |
| 136 |
#phy-cells = <0>; |
| 137 |
cdns,phy-type = <PHY_TYPE_QSGMII>; |
| 138 |
resets = <&serdes_wiz2 3>; |
| 139 |
}; |
| 140 |
}; |