| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2019-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
* |
| 5 |
* Product Link: https://www.ti.com/tool/J721EXSOMXEVM |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "k3-j721e.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
memory@80000000 { |
| 14 |
device_type = "memory"; |
| 15 |
bootph-all; |
| 16 |
/* 4G RAM */ |
| 17 |
reg = <0x00000000 0x80000000 0x00000000 0x80000000>, |
| 18 |
<0x00000008 0x80000000 0x00000000 0x80000000>; |
| 19 |
}; |
| 20 |
|
| 21 |
reserved_memory: reserved-memory { |
| 22 |
#address-cells = <2>; |
| 23 |
#size-cells = <2>; |
| 24 |
ranges; |
| 25 |
|
| 26 |
secure_ddr: optee@9e800000 { |
| 27 |
reg = <0x00 0x9e800000 0x00 0x01800000>; |
| 28 |
alignment = <0x1000>; |
| 29 |
no-map; |
| 30 |
}; |
| 31 |
|
| 32 |
mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { |
| 33 |
compatible = "shared-dma-pool"; |
| 34 |
reg = <0x00 0xa0000000 0x00 0x100000>; |
| 35 |
no-map; |
| 36 |
}; |
| 37 |
|
| 38 |
mcu_r5fss0_core0_memory_region: memory@a0100000 { |
| 39 |
compatible = "shared-dma-pool"; |
| 40 |
reg = <0x00 0xa0100000 0x00 0xf00000>; |
| 41 |
no-map; |
| 42 |
}; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
&wkup_pmx0 { |
| 47 |
wkup_i2c0_pins_default: wkup-i2c0-default-pins { |
| 48 |
pinctrl-single,pins = < |
| 49 |
J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ |
| 50 |
J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ |
| 51 |
>; |
| 52 |
bootph-all; |
| 53 |
}; |
| 54 |
|
| 55 |
pmic_irq_pins_default: pmic-irq-default-pins { |
| 56 |
pinctrl-single,pins = < |
| 57 |
J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */ |
| 58 |
>; |
| 59 |
}; |
| 60 |
|
| 61 |
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { |
| 62 |
pinctrl-single,pins = < |
| 63 |
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ |
| 64 |
J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ |
| 65 |
J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */ |
| 66 |
J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */ |
| 67 |
J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */ |
| 68 |
J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */ |
| 69 |
J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */ |
| 70 |
J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */ |
| 71 |
J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ |
| 72 |
J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ |
| 73 |
J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ |
| 74 |
>; |
| 75 |
bootph-all; |
| 76 |
}; |
| 77 |
|
| 78 |
mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { |
| 79 |
pinctrl-single,pins = < |
| 80 |
J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CK */ |
| 81 |
J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CKn */ |
| 82 |
J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CSn0 */ |
| 83 |
J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* MCU_HYPERBUS0_CSn1 */ |
| 84 |
J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_RESETn */ |
| 85 |
J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* MCU_HYPERBUS0_RWDS */ |
| 86 |
J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ0 */ |
| 87 |
J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ1 */ |
| 88 |
J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ2 */ |
| 89 |
J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ3 */ |
| 90 |
J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ4 */ |
| 91 |
J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ5 */ |
| 92 |
J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ6 */ |
| 93 |
J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ7 */ |
| 94 |
>; |
| 95 |
bootph-all; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
&wkup_i2c0 { |
| 100 |
status = "okay"; |
| 101 |
pinctrl-names = "default"; |
| 102 |
pinctrl-0 = <&wkup_i2c0_pins_default>; |
| 103 |
clock-frequency = <400000>; |
| 104 |
|
| 105 |
eeprom@50 { |
| 106 |
/* CAV24C256WE-GT3 */ |
| 107 |
compatible = "atmel,24c256"; |
| 108 |
reg = <0x50>; |
| 109 |
}; |
| 110 |
|
| 111 |
tps659413: pmic@48 { |
| 112 |
compatible = "ti,tps6594-q1"; |
| 113 |
reg = <0x48>; |
| 114 |
system-power-controller; |
| 115 |
pinctrl-names = "default"; |
| 116 |
pinctrl-0 = <&pmic_irq_pins_default>; |
| 117 |
interrupt-parent = <&wkup_gpio0>; |
| 118 |
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; |
| 119 |
gpio-controller; |
| 120 |
#gpio-cells = <2>; |
| 121 |
ti,primary-pmic; |
| 122 |
buck12-supply = <&vsys_3v3>; |
| 123 |
buck3-supply = <&vsys_3v3>; |
| 124 |
buck4-supply = <&vsys_3v3>; |
| 125 |
buck5-supply = <&vsys_3v3>; |
| 126 |
ldo1-supply = <&vsys_3v3>; |
| 127 |
ldo2-supply = <&vsys_3v3>; |
| 128 |
ldo3-supply = <&vsys_3v3>; |
| 129 |
ldo4-supply = <&vsys_3v3>; |
| 130 |
|
| 131 |
regulators { |
| 132 |
bucka12: buck12 { |
| 133 |
regulator-name = "vdd_cpu_avs"; |
| 134 |
regulator-min-microvolt = <600000>; |
| 135 |
regulator-max-microvolt = <900000>; |
| 136 |
regulator-boot-on; |
| 137 |
regulator-always-on; |
| 138 |
bootph-pre-ram; |
| 139 |
}; |
| 140 |
|
| 141 |
bucka3: buck3 { |
| 142 |
regulator-name = "vdd_mcu_0v85"; |
| 143 |
regulator-min-microvolt = <850000>; |
| 144 |
regulator-max-microvolt = <850000>; |
| 145 |
regulator-boot-on; |
| 146 |
regulator-always-on; |
| 147 |
}; |
| 148 |
|
| 149 |
bucka4: buck4 { |
| 150 |
regulator-name = "vdd_ddr_1v1"; |
| 151 |
regulator-min-microvolt = <1100000>; |
| 152 |
regulator-max-microvolt = <1100000>; |
| 153 |
regulator-boot-on; |
| 154 |
regulator-always-on; |
| 155 |
}; |
| 156 |
|
| 157 |
bucka5: buck5 { |
| 158 |
regulator-name = "vdd_phyio_1v8"; |
| 159 |
regulator-min-microvolt = <1800000>; |
| 160 |
regulator-max-microvolt = <1800000>; |
| 161 |
regulator-boot-on; |
| 162 |
regulator-always-on; |
| 163 |
}; |
| 164 |
|
| 165 |
ldoa1: ldo1 { |
| 166 |
regulator-name = "vdd1_lpddr4_1v8"; |
| 167 |
regulator-min-microvolt = <1800000>; |
| 168 |
regulator-max-microvolt = <1800000>; |
| 169 |
regulator-boot-on; |
| 170 |
regulator-always-on; |
| 171 |
}; |
| 172 |
|
| 173 |
ldoa2: ldo2 { |
| 174 |
regulator-name = "vdd_mcuio_1v8"; |
| 175 |
regulator-min-microvolt = <1800000>; |
| 176 |
regulator-max-microvolt = <1800000>; |
| 177 |
regulator-boot-on; |
| 178 |
regulator-always-on; |
| 179 |
}; |
| 180 |
|
| 181 |
ldoa3: ldo3 { |
| 182 |
regulator-name = "vdda_dll_0v8"; |
| 183 |
regulator-min-microvolt = <800000>; |
| 184 |
regulator-max-microvolt = <800000>; |
| 185 |
regulator-boot-on; |
| 186 |
regulator-always-on; |
| 187 |
}; |
| 188 |
|
| 189 |
ldoa4: ldo4 { |
| 190 |
regulator-name = "vda_mcu_1v8"; |
| 191 |
regulator-min-microvolt = <1800000>; |
| 192 |
regulator-max-microvolt = <1800000>; |
| 193 |
regulator-boot-on; |
| 194 |
regulator-always-on; |
| 195 |
}; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
tps659411: pmic@4c { |
| 200 |
compatible = "ti,tps6594-q1"; |
| 201 |
reg = <0x4c>; |
| 202 |
system-power-controller; |
| 203 |
interrupt-parent = <&wkup_gpio0>; |
| 204 |
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; |
| 205 |
gpio-controller; |
| 206 |
#gpio-cells = <2>; |
| 207 |
buck1234-supply = <&vsys_3v3>; |
| 208 |
buck5-supply = <&vsys_3v3>; |
| 209 |
ldo1-supply = <&vsys_3v3>; |
| 210 |
ldo2-supply = <&vsys_3v3>; |
| 211 |
ldo3-supply = <&vsys_3v3>; |
| 212 |
ldo4-supply = <&vsys_3v3>; |
| 213 |
|
| 214 |
regulators { |
| 215 |
buckb1234: buck1234 { |
| 216 |
regulator-name = "vdd_core_0v8"; |
| 217 |
regulator-min-microvolt = <800000>; |
| 218 |
regulator-max-microvolt = <800000>; |
| 219 |
regulator-boot-on; |
| 220 |
regulator-always-on; |
| 221 |
}; |
| 222 |
|
| 223 |
buckb5: buck5 { |
| 224 |
regulator-name = "vdd_ram_0v85"; |
| 225 |
regulator-min-microvolt = <850000>; |
| 226 |
regulator-max-microvolt = <850000>; |
| 227 |
regulator-boot-on; |
| 228 |
regulator-always-on; |
| 229 |
}; |
| 230 |
|
| 231 |
ldob1: ldo1 { |
| 232 |
regulator-name = "vdd_sd_dv"; |
| 233 |
regulator-min-microvolt = <1800000>; |
| 234 |
regulator-max-microvolt = <3300000>; |
| 235 |
regulator-boot-on; |
| 236 |
regulator-always-on; |
| 237 |
}; |
| 238 |
|
| 239 |
ldob2: ldo2 { |
| 240 |
regulator-name = "vdd_usb_3v3"; |
| 241 |
regulator-min-microvolt = <3300000>; |
| 242 |
regulator-max-microvolt = <3300000>; |
| 243 |
regulator-boot-on; |
| 244 |
regulator-always-on; |
| 245 |
}; |
| 246 |
|
| 247 |
ldob3: ldo3 { |
| 248 |
regulator-name = "vdd_io_1v8"; |
| 249 |
regulator-min-microvolt = <1800000>; |
| 250 |
regulator-max-microvolt = <1800000>; |
| 251 |
regulator-boot-on; |
| 252 |
regulator-always-on; |
| 253 |
}; |
| 254 |
|
| 255 |
ldob4: ldo4 { |
| 256 |
regulator-name = "vda_pll_1v8"; |
| 257 |
regulator-min-microvolt = <1800000>; |
| 258 |
regulator-max-microvolt = <1800000>; |
| 259 |
regulator-boot-on; |
| 260 |
regulator-always-on; |
| 261 |
}; |
| 262 |
}; |
| 263 |
}; |
| 264 |
}; |
| 265 |
|
| 266 |
&ospi0 { |
| 267 |
status = "okay"; |
| 268 |
pinctrl-names = "default"; |
| 269 |
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; |
| 270 |
|
| 271 |
flash@0 { |
| 272 |
compatible = "jedec,spi-nor"; |
| 273 |
reg = <0x0>; |
| 274 |
spi-tx-bus-width = <8>; |
| 275 |
spi-rx-bus-width = <8>; |
| 276 |
spi-max-frequency = <25000000>; |
| 277 |
cdns,tshsl-ns = <60>; |
| 278 |
cdns,tsd2d-ns = <60>; |
| 279 |
cdns,tchsh-ns = <60>; |
| 280 |
cdns,tslch-ns = <60>; |
| 281 |
cdns,read-delay = <0>; |
| 282 |
|
| 283 |
partitions { |
| 284 |
compatible = "fixed-partitions"; |
| 285 |
#address-cells = <1>; |
| 286 |
#size-cells = <1>; |
| 287 |
|
| 288 |
partition@0 { |
| 289 |
label = "ospi.tiboot3"; |
| 290 |
reg = <0x0 0x80000>; |
| 291 |
}; |
| 292 |
|
| 293 |
partition@80000 { |
| 294 |
label = "ospi.tispl"; |
| 295 |
reg = <0x80000 0x200000>; |
| 296 |
}; |
| 297 |
|
| 298 |
partition@280000 { |
| 299 |
label = "ospi.u-boot"; |
| 300 |
reg = <0x280000 0x400000>; |
| 301 |
}; |
| 302 |
|
| 303 |
partition@680000 { |
| 304 |
label = "ospi.env"; |
| 305 |
reg = <0x680000 0x20000>; |
| 306 |
}; |
| 307 |
|
| 308 |
partition@6a0000 { |
| 309 |
label = "ospi.env.backup"; |
| 310 |
reg = <0x6a0000 0x20000>; |
| 311 |
}; |
| 312 |
|
| 313 |
partition@6c0000 { |
| 314 |
label = "ospi.sysfw"; |
| 315 |
reg = <0x6c0000 0x100000>; |
| 316 |
}; |
| 317 |
|
| 318 |
partition@800000 { |
| 319 |
label = "ospi.rootfs"; |
| 320 |
reg = <0x800000 0x37c0000>; |
| 321 |
}; |
| 322 |
|
| 323 |
partition@3fe0000 { |
| 324 |
label = "ospi.phypattern"; |
| 325 |
reg = <0x3fe0000 0x20000>; |
| 326 |
bootph-all; |
| 327 |
}; |
| 328 |
}; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
&hbmc { |
| 333 |
/* OSPI and HBMC are muxed inside FSS, Bootloader will enable |
| 334 |
* appropriate node based on board detection |
| 335 |
*/ |
| 336 |
status = "disabled"; |
| 337 |
pinctrl-names = "default"; |
| 338 |
pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; |
| 339 |
ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */ |
| 340 |
<0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */ |
| 341 |
|
| 342 |
flash@0,0 { |
| 343 |
compatible = "cypress,hyperflash", "cfi-flash"; |
| 344 |
reg = <0x00 0x00 0x4000000>; |
| 345 |
bootph-all; |
| 346 |
|
| 347 |
partitions { |
| 348 |
compatible = "fixed-partitions"; |
| 349 |
#address-cells = <1>; |
| 350 |
#size-cells = <1>; |
| 351 |
|
| 352 |
partition@0 { |
| 353 |
label = "hbmc.tiboot3"; |
| 354 |
reg = <0x0 0x80000>; |
| 355 |
}; |
| 356 |
|
| 357 |
partition@80000 { |
| 358 |
label = "hbmc.tispl"; |
| 359 |
reg = <0x80000 0x200000>; |
| 360 |
}; |
| 361 |
|
| 362 |
partition@280000 { |
| 363 |
label = "hbmc.u-boot"; |
| 364 |
reg = <0x280000 0x400000>; |
| 365 |
}; |
| 366 |
|
| 367 |
partition@680000 { |
| 368 |
label = "hbmc.env"; |
| 369 |
reg = <0x680000 0x40000>; |
| 370 |
}; |
| 371 |
|
| 372 |
partition@6c0000 { |
| 373 |
label = "hbmc.sysfw"; |
| 374 |
reg = <0x6c0000 0x100000>; |
| 375 |
}; |
| 376 |
|
| 377 |
partition@800000 { |
| 378 |
label = "hbmc.rootfs"; |
| 379 |
reg = <0x800000 0x3800000>; |
| 380 |
}; |
| 381 |
}; |
| 382 |
}; |
| 383 |
}; |
| 384 |
|
| 385 |
#include "k3-j721e-ti-ipc-firmware.dtsi" |