| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
* |
| 5 |
* J721E SK URL: https://www.ti.com/tool/SK-TDA4VM |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "k3-j721e.dtsi" |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/net/ti-dp83867.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
compatible = "ti,j721e-sk", "ti,j721e"; |
| 17 |
model = "Texas Instruments J721E SK"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &wkup_uart0; |
| 21 |
serial1 = &mcu_uart0; |
| 22 |
serial2 = &main_uart0; |
| 23 |
serial3 = &main_uart1; |
| 24 |
ethernet0 = &cpsw_port1; |
| 25 |
mmc1 = &main_sdhci1; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
stdout-path = "serial2:115200n8"; |
| 30 |
}; |
| 31 |
|
| 32 |
memory@80000000 { |
| 33 |
device_type = "memory"; |
| 34 |
bootph-all; |
| 35 |
/* 4G RAM */ |
| 36 |
reg = <0x00000000 0x80000000 0x00000000 0x80000000>, |
| 37 |
<0x00000008 0x80000000 0x00000000 0x80000000>; |
| 38 |
}; |
| 39 |
|
| 40 |
reserved_memory: reserved-memory { |
| 41 |
#address-cells = <2>; |
| 42 |
#size-cells = <2>; |
| 43 |
ranges; |
| 44 |
|
| 45 |
secure_ddr: optee@9e800000 { |
| 46 |
reg = <0x00 0x9e800000 0x00 0x01800000>; |
| 47 |
alignment = <0x1000>; |
| 48 |
no-map; |
| 49 |
}; |
| 50 |
|
| 51 |
mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { |
| 52 |
compatible = "shared-dma-pool"; |
| 53 |
reg = <0x00 0xa0000000 0x00 0x100000>; |
| 54 |
no-map; |
| 55 |
}; |
| 56 |
|
| 57 |
mcu_r5fss0_core0_memory_region: memory@a0100000 { |
| 58 |
compatible = "shared-dma-pool"; |
| 59 |
reg = <0x00 0xa0100000 0x00 0xf00000>; |
| 60 |
no-map; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
vusb_main: fixedregulator-vusb-main5v0 { |
| 65 |
/* USB MAIN INPUT 5V DC */ |
| 66 |
compatible = "regulator-fixed"; |
| 67 |
regulator-name = "vusb-main5v0"; |
| 68 |
regulator-min-microvolt = <5000000>; |
| 69 |
regulator-max-microvolt = <5000000>; |
| 70 |
regulator-always-on; |
| 71 |
regulator-boot-on; |
| 72 |
}; |
| 73 |
|
| 74 |
vsys_3v3: fixedregulator-vsys3v3 { |
| 75 |
/* Output of LM5141 */ |
| 76 |
compatible = "regulator-fixed"; |
| 77 |
regulator-name = "vsys_3v3"; |
| 78 |
regulator-min-microvolt = <3300000>; |
| 79 |
regulator-max-microvolt = <3300000>; |
| 80 |
vin-supply = <&vusb_main>; |
| 81 |
regulator-always-on; |
| 82 |
regulator-boot-on; |
| 83 |
}; |
| 84 |
|
| 85 |
vsys_5v0: fixedregulator-vsys5v0 { |
| 86 |
/* Output of LM61460 */ |
| 87 |
compatible = "regulator-fixed"; |
| 88 |
regulator-name = "vsys_5v0"; |
| 89 |
regulator-min-microvolt = <5000000>; |
| 90 |
regulator-max-microvolt = <5000000>; |
| 91 |
vin-supply = <&vusb_main>; |
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
}; |
| 95 |
|
| 96 |
vdd_mmc1: fixedregulator-sd { |
| 97 |
compatible = "regulator-fixed"; |
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&vdd_mmc1_en_pins_default>; |
| 100 |
regulator-name = "vdd_mmc1"; |
| 101 |
regulator-min-microvolt = <3300000>; |
| 102 |
regulator-max-microvolt = <3300000>; |
| 103 |
regulator-boot-on; |
| 104 |
enable-active-high; |
| 105 |
vin-supply = <&vsys_3v3>; |
| 106 |
gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>; |
| 107 |
}; |
| 108 |
|
| 109 |
vdd_sd_dv_alt: gpio-regulator-tps659411 { |
| 110 |
compatible = "regulator-gpio"; |
| 111 |
pinctrl-names = "default"; |
| 112 |
pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; |
| 113 |
regulator-name = "tps659411"; |
| 114 |
regulator-min-microvolt = <1800000>; |
| 115 |
regulator-max-microvolt = <3300000>; |
| 116 |
regulator-boot-on; |
| 117 |
vin-supply = <&vsys_3v3>; |
| 118 |
gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>; |
| 119 |
states = <1800000 0x0>, |
| 120 |
<3300000 0x1>; |
| 121 |
}; |
| 122 |
|
| 123 |
vdd_sd_dv: gpio-regulator-TLV71033 { |
| 124 |
compatible = "regulator-gpio"; |
| 125 |
pinctrl-names = "default"; |
| 126 |
pinctrl-0 = <&vdd_sd_dv_pins_default>; |
| 127 |
regulator-name = "tlv71033"; |
| 128 |
regulator-min-microvolt = <1800000>; |
| 129 |
regulator-max-microvolt = <3300000>; |
| 130 |
regulator-boot-on; |
| 131 |
vin-supply = <&vsys_5v0>; |
| 132 |
gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>; |
| 133 |
states = <1800000 0x0>, |
| 134 |
<3300000 0x1>; |
| 135 |
}; |
| 136 |
|
| 137 |
transceiver1: can-phy1 { |
| 138 |
compatible = "ti,tcan1042"; |
| 139 |
#phy-cells = <0>; |
| 140 |
max-bitrate = <5000000>; |
| 141 |
pinctrl-names = "default"; |
| 142 |
pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; |
| 143 |
standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>; |
| 144 |
}; |
| 145 |
|
| 146 |
transceiver2: can-phy2 { |
| 147 |
compatible = "ti,tcan1042"; |
| 148 |
#phy-cells = <0>; |
| 149 |
max-bitrate = <5000000>; |
| 150 |
pinctrl-names = "default"; |
| 151 |
pinctrl-0 = <&main_mcan0_gpio_pins_default>; |
| 152 |
standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>; |
| 153 |
}; |
| 154 |
|
| 155 |
transceiver3: can-phy3 { |
| 156 |
compatible = "ti,tcan1042"; |
| 157 |
#phy-cells = <0>; |
| 158 |
max-bitrate = <5000000>; |
| 159 |
pinctrl-names = "default"; |
| 160 |
pinctrl-0 = <&main_mcan5_gpio_pins_default>; |
| 161 |
standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>; |
| 162 |
}; |
| 163 |
|
| 164 |
transceiver4: can-phy4 { |
| 165 |
compatible = "ti,tcan1042"; |
| 166 |
#phy-cells = <0>; |
| 167 |
max-bitrate = <5000000>; |
| 168 |
pinctrl-names = "default"; |
| 169 |
pinctrl-0 = <&main_mcan9_gpio_pins_default>; |
| 170 |
standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>; |
| 171 |
}; |
| 172 |
|
| 173 |
dp_pwr_3v3: fixedregulator-dp-prw { |
| 174 |
compatible = "regulator-fixed"; |
| 175 |
regulator-name = "dp-pwr"; |
| 176 |
regulator-min-microvolt = <3300000>; |
| 177 |
regulator-max-microvolt = <3300000>; |
| 178 |
pinctrl-names = "default"; |
| 179 |
pinctrl-0 = <&dp_pwr_en_pins_default>; |
| 180 |
gpio = <&main_gpio0 111 0>; /* DP0_3V3 _EN */ |
| 181 |
enable-active-high; |
| 182 |
}; |
| 183 |
|
| 184 |
dp0: connector { |
| 185 |
compatible = "dp-connector"; |
| 186 |
label = "DP0"; |
| 187 |
type = "full-size"; |
| 188 |
dp-pwr-supply = <&dp_pwr_3v3>; |
| 189 |
|
| 190 |
port { |
| 191 |
dp_connector_in: endpoint { |
| 192 |
remote-endpoint = <&dp0_out>; |
| 193 |
}; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
hdmi-connector { |
| 198 |
compatible = "hdmi-connector"; |
| 199 |
label = "hdmi"; |
| 200 |
type = "a"; |
| 201 |
|
| 202 |
pinctrl-names = "default"; |
| 203 |
pinctrl-0 = <&hdmi_hpd_pins_default>; |
| 204 |
|
| 205 |
ddc-i2c-bus = <&main_i2c1>; |
| 206 |
|
| 207 |
/* HDMI_HPD */ |
| 208 |
hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>; |
| 209 |
|
| 210 |
port { |
| 211 |
hdmi_connector_in: endpoint { |
| 212 |
remote-endpoint = <&tfp410_out>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
dvi-bridge { |
| 218 |
compatible = "ti,tfp410"; |
| 219 |
|
| 220 |
pinctrl-names = "default"; |
| 221 |
pinctrl-0 = <&hdmi_pdn_pins_default>; |
| 222 |
|
| 223 |
powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>; |
| 224 |
ti,deskew = <0>; |
| 225 |
|
| 226 |
ports { |
| 227 |
#address-cells = <1>; |
| 228 |
#size-cells = <0>; |
| 229 |
|
| 230 |
port@0 { |
| 231 |
reg = <0>; |
| 232 |
|
| 233 |
tfp410_in: endpoint { |
| 234 |
remote-endpoint = <&dpi1_out>; |
| 235 |
pclk-sample = <1>; |
| 236 |
}; |
| 237 |
}; |
| 238 |
|
| 239 |
port@1 { |
| 240 |
reg = <1>; |
| 241 |
|
| 242 |
tfp410_out: endpoint { |
| 243 |
remote-endpoint = |
| 244 |
<&hdmi_connector_in>; |
| 245 |
}; |
| 246 |
}; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
csi_mux: mux-controller { |
| 251 |
compatible = "gpio-mux"; |
| 252 |
#mux-state-cells = <1>; |
| 253 |
mux-gpios = <&main_gpio0 88 GPIO_ACTIVE_HIGH>; |
| 254 |
idle-state = <0>; |
| 255 |
pinctrl-names = "default"; |
| 256 |
pinctrl-0 = <&main_csi_mux_sel_pins_default>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
&main_pmx0 { |
| 261 |
main_mmc1_pins_default: main-mmc1-default-pins { |
| 262 |
pinctrl-single,pins = < |
| 263 |
J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ |
| 264 |
J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ |
| 265 |
J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ |
| 266 |
J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ |
| 267 |
J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ |
| 268 |
J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ |
| 269 |
J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ |
| 270 |
J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ |
| 271 |
>; |
| 272 |
bootph-all; |
| 273 |
}; |
| 274 |
|
| 275 |
main_uart0_pins_default: main-uart0-default-pins { |
| 276 |
pinctrl-single,pins = < |
| 277 |
J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ |
| 278 |
J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ |
| 279 |
J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ |
| 280 |
J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ |
| 281 |
>; |
| 282 |
bootph-all; |
| 283 |
}; |
| 284 |
|
| 285 |
main_uart1_pins_default: main-uart1-default-pins { |
| 286 |
pinctrl-single,pins = < |
| 287 |
J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ |
| 288 |
J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ |
| 289 |
>; |
| 290 |
}; |
| 291 |
|
| 292 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 293 |
pinctrl-single,pins = < |
| 294 |
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ |
| 295 |
J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ |
| 296 |
>; |
| 297 |
}; |
| 298 |
|
| 299 |
main_i2c1_pins_default: main-i2c1-default-pins { |
| 300 |
pinctrl-single,pins = < |
| 301 |
J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ |
| 302 |
J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ |
| 303 |
>; |
| 304 |
}; |
| 305 |
|
| 306 |
main_i2c3_pins_default: main-i2c3-default-pins { |
| 307 |
pinctrl-single,pins = < |
| 308 |
J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ |
| 309 |
J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ |
| 310 |
>; |
| 311 |
}; |
| 312 |
|
| 313 |
main_usbss0_pins_default: main-usbss0-default-pins { |
| 314 |
pinctrl-single,pins = < |
| 315 |
J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ |
| 316 |
J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ |
| 317 |
>; |
| 318 |
bootph-all; |
| 319 |
}; |
| 320 |
|
| 321 |
main_usbss1_pins_default: main-usbss1-default-pins { |
| 322 |
pinctrl-single,pins = < |
| 323 |
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ |
| 324 |
>; |
| 325 |
bootph-all; |
| 326 |
}; |
| 327 |
|
| 328 |
main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { |
| 329 |
pinctrl-single,pins = < |
| 330 |
J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ |
| 331 |
>; |
| 332 |
}; |
| 333 |
|
| 334 |
main_mcan0_pins_default: main-mcan0-default-pins { |
| 335 |
pinctrl-single,pins = < |
| 336 |
J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ |
| 337 |
J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ |
| 338 |
>; |
| 339 |
}; |
| 340 |
|
| 341 |
main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins { |
| 342 |
pinctrl-single,pins = < |
| 343 |
J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */ |
| 344 |
>; |
| 345 |
}; |
| 346 |
|
| 347 |
main_mcan5_pins_default: main-mcan5-default-pins { |
| 348 |
pinctrl-single,pins = < |
| 349 |
J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */ |
| 350 |
J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */ |
| 351 |
>; |
| 352 |
}; |
| 353 |
|
| 354 |
main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins { |
| 355 |
pinctrl-single,pins = < |
| 356 |
J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */ |
| 357 |
>; |
| 358 |
}; |
| 359 |
|
| 360 |
main_mcan9_pins_default: main-mcan9-default-pins { |
| 361 |
pinctrl-single,pins = < |
| 362 |
J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */ |
| 363 |
J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */ |
| 364 |
>; |
| 365 |
}; |
| 366 |
|
| 367 |
main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins { |
| 368 |
pinctrl-single,pins = < |
| 369 |
J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */ |
| 370 |
>; |
| 371 |
}; |
| 372 |
|
| 373 |
dp0_pins_default: dp0-default-pins { |
| 374 |
pinctrl-single,pins = < |
| 375 |
J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ |
| 376 |
>; |
| 377 |
}; |
| 378 |
|
| 379 |
dp_pwr_en_pins_default: dp-pwr-en-default-pins { |
| 380 |
pinctrl-single,pins = < |
| 381 |
J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ |
| 382 |
>; |
| 383 |
}; |
| 384 |
|
| 385 |
dss_vout0_pins_default: dss-vout0-default-pins { |
| 386 |
pinctrl-single,pins = < |
| 387 |
J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ |
| 388 |
J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ |
| 389 |
J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */ |
| 390 |
J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */ |
| 391 |
J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */ |
| 392 |
J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */ |
| 393 |
J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */ |
| 394 |
J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */ |
| 395 |
J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */ |
| 396 |
J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */ |
| 397 |
J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */ |
| 398 |
J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */ |
| 399 |
J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */ |
| 400 |
J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */ |
| 401 |
J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */ |
| 402 |
J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */ |
| 403 |
J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */ |
| 404 |
J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */ |
| 405 |
J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */ |
| 406 |
J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */ |
| 407 |
J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */ |
| 408 |
J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */ |
| 409 |
J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */ |
| 410 |
J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */ |
| 411 |
J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */ |
| 412 |
J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */ |
| 413 |
J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */ |
| 414 |
J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */ |
| 415 |
>; |
| 416 |
}; |
| 417 |
|
| 418 |
hdmi_hpd_pins_default: hdmi-hpd-default-pins { |
| 419 |
pinctrl-single,pins = < |
| 420 |
J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ |
| 421 |
>; |
| 422 |
}; |
| 423 |
|
| 424 |
hdmi_pdn_pins_default: hdmi-pdn-default-pins { |
| 425 |
pinctrl-single,pins = < |
| 426 |
J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ |
| 427 |
>; |
| 428 |
}; |
| 429 |
|
| 430 |
/* Reset for M.2 E Key slot on PCIe0 */ |
| 431 |
ekey_reset_pins_default: ekey-reset-pns-default-pins { |
| 432 |
pinctrl-single,pins = < |
| 433 |
J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ |
| 434 |
>; |
| 435 |
}; |
| 436 |
|
| 437 |
main_i2c5_pins_default: main-i2c5-default-pins { |
| 438 |
pinctrl-single,pins = < |
| 439 |
J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ |
| 440 |
J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ |
| 441 |
>; |
| 442 |
}; |
| 443 |
|
| 444 |
rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { |
| 445 |
pinctrl-single,pins = < |
| 446 |
J721E_IOPAD(0x01c, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */ |
| 447 |
J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */ |
| 448 |
J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */ |
| 449 |
J721E_IOPAD(0x02c, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */ |
| 450 |
J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */ |
| 451 |
J721E_IOPAD(0x1b0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */ |
| 452 |
J721E_IOPAD(0x1a0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */ |
| 453 |
J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */ |
| 454 |
J721E_IOPAD(0x1d0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */ |
| 455 |
J721E_IOPAD(0x11c, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */ |
| 456 |
J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */ |
| 457 |
J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */ |
| 458 |
J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */ |
| 459 |
J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */ |
| 460 |
J721E_IOPAD(0x19c, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */ |
| 461 |
J721E_IOPAD(0x1b4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */ |
| 462 |
J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */ |
| 463 |
J721E_IOPAD(0x00c, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */ |
| 464 |
J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */ |
| 465 |
J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */ |
| 466 |
J721E_IOPAD(0x17c, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */ |
| 467 |
J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */ |
| 468 |
J721E_IOPAD(0x18c, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */ |
| 469 |
>; |
| 470 |
}; |
| 471 |
|
| 472 |
rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins { |
| 473 |
pinctrl-single,pins = < |
| 474 |
J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ |
| 475 |
>; |
| 476 |
}; |
| 477 |
|
| 478 |
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { |
| 479 |
pinctrl-single,pins = < |
| 480 |
J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */ |
| 481 |
>; |
| 482 |
}; |
| 483 |
}; |
| 484 |
|
| 485 |
&wkup_pmx0 { |
| 486 |
pmic_irq_pins_default: pmic-irq-default-pins { |
| 487 |
pinctrl-single,pins = < |
| 488 |
J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ |
| 489 |
>; |
| 490 |
}; |
| 491 |
|
| 492 |
mcu_cpsw_pins_default: mcu-cpsw-default-pins { |
| 493 |
pinctrl-single,pins = < |
| 494 |
J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ |
| 495 |
J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ |
| 496 |
J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */ |
| 497 |
J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */ |
| 498 |
J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */ |
| 499 |
J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */ |
| 500 |
J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */ |
| 501 |
J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */ |
| 502 |
J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */ |
| 503 |
J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */ |
| 504 |
J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */ |
| 505 |
J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */ |
| 506 |
>; |
| 507 |
}; |
| 508 |
|
| 509 |
mcu_mdio_pins_default: mcu-mdio1-default-pins { |
| 510 |
pinctrl-single,pins = < |
| 511 |
J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ |
| 512 |
J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ |
| 513 |
>; |
| 514 |
}; |
| 515 |
|
| 516 |
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { |
| 517 |
pinctrl-single,pins = < |
| 518 |
J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ |
| 519 |
J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ |
| 520 |
J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */ |
| 521 |
J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */ |
| 522 |
J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */ |
| 523 |
J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */ |
| 524 |
J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */ |
| 525 |
J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */ |
| 526 |
J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ |
| 527 |
J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ |
| 528 |
J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ |
| 529 |
>; |
| 530 |
bootph-all; |
| 531 |
}; |
| 532 |
|
| 533 |
vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { |
| 534 |
pinctrl-single,pins = < |
| 535 |
J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ |
| 536 |
>; |
| 537 |
}; |
| 538 |
|
| 539 |
vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { |
| 540 |
pinctrl-single,pins = < |
| 541 |
J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ |
| 542 |
>; |
| 543 |
}; |
| 544 |
|
| 545 |
wkup_uart0_pins_default: wkup-uart0-default-pins { |
| 546 |
pinctrl-single,pins = < |
| 547 |
J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ |
| 548 |
J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ |
| 549 |
>; |
| 550 |
}; |
| 551 |
|
| 552 |
mcu_uart0_pins_default: mcu-uart0-default-pins { |
| 553 |
pinctrl-single,pins = < |
| 554 |
J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */ |
| 555 |
J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ |
| 556 |
J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ |
| 557 |
J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ |
| 558 |
>; |
| 559 |
bootph-all; |
| 560 |
}; |
| 561 |
|
| 562 |
wkup_i2c0_pins_default: wkup-i2c0-default-pins { |
| 563 |
pinctrl-single,pins = < |
| 564 |
J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ |
| 565 |
J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ |
| 566 |
>; |
| 567 |
bootph-all; |
| 568 |
}; |
| 569 |
|
| 570 |
mcu_mcan0_pins_default: mcu-mcan0-default-pins { |
| 571 |
pinctrl-single,pins = < |
| 572 |
J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ |
| 573 |
J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ |
| 574 |
>; |
| 575 |
}; |
| 576 |
|
| 577 |
mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { |
| 578 |
pinctrl-single,pins = < |
| 579 |
J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */ |
| 580 |
>; |
| 581 |
}; |
| 582 |
|
| 583 |
/* Reset for M.2 M Key slot on PCIe1 */ |
| 584 |
mkey_reset_pins_default: mkey-reset-pns-default-pins { |
| 585 |
pinctrl-single,pins = < |
| 586 |
J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ |
| 587 |
>; |
| 588 |
}; |
| 589 |
}; |
| 590 |
|
| 591 |
&wkup_uart0 { |
| 592 |
/* Wakeup UART is used by System firmware */ |
| 593 |
status = "reserved"; |
| 594 |
pinctrl-names = "default"; |
| 595 |
pinctrl-0 = <&wkup_uart0_pins_default>; |
| 596 |
bootph-all; |
| 597 |
}; |
| 598 |
|
| 599 |
&wkup_i2c0 { |
| 600 |
status = "okay"; |
| 601 |
pinctrl-names = "default"; |
| 602 |
pinctrl-0 = <&wkup_i2c0_pins_default>; |
| 603 |
clock-frequency = <400000>; |
| 604 |
|
| 605 |
eeprom@51 { |
| 606 |
/* AT24C512C-MAHM-T */ |
| 607 |
compatible = "atmel,24c512"; |
| 608 |
reg = <0x51>; |
| 609 |
}; |
| 610 |
|
| 611 |
tps659413: pmic@48 { |
| 612 |
compatible = "ti,tps6594-q1"; |
| 613 |
reg = <0x48>; |
| 614 |
system-power-controller; |
| 615 |
pinctrl-names = "default"; |
| 616 |
pinctrl-0 = <&pmic_irq_pins_default>; |
| 617 |
interrupt-parent = <&wkup_gpio0>; |
| 618 |
interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| 619 |
gpio-controller; |
| 620 |
#gpio-cells = <2>; |
| 621 |
ti,primary-pmic; |
| 622 |
buck123-supply = <&vsys_3v3>; |
| 623 |
buck4-supply = <&vsys_3v3>; |
| 624 |
buck5-supply = <&vsys_3v3>; |
| 625 |
ldo1-supply = <&vsys_3v3>; |
| 626 |
ldo2-supply = <&vsys_3v3>; |
| 627 |
ldo3-supply = <&vsys_3v3>; |
| 628 |
ldo4-supply = <&vsys_3v3>; |
| 629 |
|
| 630 |
regulators { |
| 631 |
bucka123: buck123 { |
| 632 |
regulator-name = "vdd_cpu_avs"; |
| 633 |
regulator-min-microvolt = <600000>; |
| 634 |
regulator-max-microvolt = <900000>; |
| 635 |
regulator-boot-on; |
| 636 |
regulator-always-on; |
| 637 |
bootph-pre-ram; |
| 638 |
}; |
| 639 |
|
| 640 |
bucka4: buck4 { |
| 641 |
regulator-name = "vdd_mcu_0v85"; |
| 642 |
regulator-min-microvolt = <850000>; |
| 643 |
regulator-max-microvolt = <850000>; |
| 644 |
regulator-boot-on; |
| 645 |
regulator-always-on; |
| 646 |
}; |
| 647 |
|
| 648 |
bucka5: buck5 { |
| 649 |
regulator-name = "vdd_phyio_1v8"; |
| 650 |
regulator-min-microvolt = <1800000>; |
| 651 |
regulator-max-microvolt = <1800000>; |
| 652 |
regulator-boot-on; |
| 653 |
regulator-always-on; |
| 654 |
}; |
| 655 |
|
| 656 |
ldoa1: ldo1 { |
| 657 |
regulator-name = "vdd1_lpddr4_1v8"; |
| 658 |
regulator-min-microvolt = <1800000>; |
| 659 |
regulator-max-microvolt = <1800000>; |
| 660 |
regulator-boot-on; |
| 661 |
regulator-always-on; |
| 662 |
}; |
| 663 |
|
| 664 |
ldoa2: ldo2 { |
| 665 |
regulator-name = "vdd_mcuio_1v8"; |
| 666 |
regulator-min-microvolt = <1800000>; |
| 667 |
regulator-max-microvolt = <1800000>; |
| 668 |
regulator-boot-on; |
| 669 |
regulator-always-on; |
| 670 |
}; |
| 671 |
|
| 672 |
ldoa3: ldo3 { |
| 673 |
regulator-name = "vdda_dll_0v8"; |
| 674 |
regulator-min-microvolt = <800000>; |
| 675 |
regulator-max-microvolt = <800000>; |
| 676 |
regulator-boot-on; |
| 677 |
regulator-always-on; |
| 678 |
}; |
| 679 |
|
| 680 |
ldoa4: ldo4 { |
| 681 |
regulator-name = "vda_mcu_1v8"; |
| 682 |
regulator-min-microvolt = <1800000>; |
| 683 |
regulator-max-microvolt = <1800000>; |
| 684 |
regulator-boot-on; |
| 685 |
regulator-always-on; |
| 686 |
}; |
| 687 |
}; |
| 688 |
}; |
| 689 |
|
| 690 |
tps659411: pmic@4c { |
| 691 |
compatible = "ti,tps6594-q1"; |
| 692 |
reg = <0x4c>; |
| 693 |
system-power-controller; |
| 694 |
interrupt-parent = <&wkup_gpio0>; |
| 695 |
interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| 696 |
gpio-controller; |
| 697 |
#gpio-cells = <2>; |
| 698 |
buck1234-supply = <&vsys_3v3>; |
| 699 |
buck5-supply = <&vsys_3v3>; |
| 700 |
ldo1-supply = <&vsys_3v3>; |
| 701 |
ldo2-supply = <&vsys_3v3>; |
| 702 |
ldo3-supply = <&vsys_3v3>; |
| 703 |
ldo4-supply = <&vsys_3v3>; |
| 704 |
|
| 705 |
regulators { |
| 706 |
buckb1234: buck1234 { |
| 707 |
regulator-name = "vdd_core_0v8"; |
| 708 |
regulator-min-microvolt = <800000>; |
| 709 |
regulator-max-microvolt = <800000>; |
| 710 |
regulator-boot-on; |
| 711 |
regulator-always-on; |
| 712 |
}; |
| 713 |
|
| 714 |
buckb5: buck5 { |
| 715 |
regulator-name = "vdd_ram_0v85"; |
| 716 |
regulator-min-microvolt = <850000>; |
| 717 |
regulator-max-microvolt = <850000>; |
| 718 |
regulator-boot-on; |
| 719 |
regulator-always-on; |
| 720 |
}; |
| 721 |
|
| 722 |
ldob1: ldo1 { |
| 723 |
regulator-name = "vdd_sd_dv"; |
| 724 |
regulator-min-microvolt = <1800000>; |
| 725 |
regulator-max-microvolt = <3300000>; |
| 726 |
regulator-boot-on; |
| 727 |
regulator-always-on; |
| 728 |
}; |
| 729 |
|
| 730 |
ldob2: ldo2 { |
| 731 |
regulator-name = "vdd_usb_3v3"; |
| 732 |
regulator-min-microvolt = <3300000>; |
| 733 |
regulator-max-microvolt = <3300000>; |
| 734 |
regulator-boot-on; |
| 735 |
regulator-always-on; |
| 736 |
}; |
| 737 |
|
| 738 |
ldob3: ldo3 { |
| 739 |
regulator-name = "vdd_io_1v8"; |
| 740 |
regulator-min-microvolt = <1800000>; |
| 741 |
regulator-max-microvolt = <1800000>; |
| 742 |
regulator-boot-on; |
| 743 |
regulator-always-on; |
| 744 |
}; |
| 745 |
|
| 746 |
ldob4: ldo4 { |
| 747 |
regulator-name = "vda_pll_1v8"; |
| 748 |
regulator-min-microvolt = <1800000>; |
| 749 |
regulator-max-microvolt = <1800000>; |
| 750 |
regulator-boot-on; |
| 751 |
regulator-always-on; |
| 752 |
}; |
| 753 |
}; |
| 754 |
}; |
| 755 |
}; |
| 756 |
|
| 757 |
&mcu_uart0 { |
| 758 |
status = "okay"; |
| 759 |
pinctrl-names = "default"; |
| 760 |
pinctrl-0 = <&mcu_uart0_pins_default>; |
| 761 |
bootph-all; |
| 762 |
}; |
| 763 |
|
| 764 |
&main_uart0 { |
| 765 |
status = "okay"; |
| 766 |
pinctrl-names = "default"; |
| 767 |
pinctrl-0 = <&main_uart0_pins_default>; |
| 768 |
/* Shared with ATF on this platform */ |
| 769 |
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; |
| 770 |
bootph-all; |
| 771 |
}; |
| 772 |
|
| 773 |
&main_uart1 { |
| 774 |
status = "okay"; |
| 775 |
pinctrl-names = "default"; |
| 776 |
pinctrl-0 = <&main_uart1_pins_default>; |
| 777 |
}; |
| 778 |
|
| 779 |
&main_sdhci1 { |
| 780 |
/* SD Card */ |
| 781 |
status = "okay"; |
| 782 |
vmmc-supply = <&vdd_mmc1>; |
| 783 |
vqmmc-supply = <&vdd_sd_dv_alt>; |
| 784 |
pinctrl-names = "default"; |
| 785 |
pinctrl-0 = <&main_mmc1_pins_default>; |
| 786 |
bootph-all; |
| 787 |
ti,driver-strength-ohm = <50>; |
| 788 |
disable-wp; |
| 789 |
}; |
| 790 |
|
| 791 |
&ospi0 { |
| 792 |
status = "okay"; |
| 793 |
pinctrl-names = "default"; |
| 794 |
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; |
| 795 |
|
| 796 |
flash@0 { |
| 797 |
compatible = "jedec,spi-nor"; |
| 798 |
reg = <0x0>; |
| 799 |
spi-tx-bus-width = <8>; |
| 800 |
spi-rx-bus-width = <8>; |
| 801 |
spi-max-frequency = <25000000>; |
| 802 |
cdns,tshsl-ns = <60>; |
| 803 |
cdns,tsd2d-ns = <60>; |
| 804 |
cdns,tchsh-ns = <60>; |
| 805 |
cdns,tslch-ns = <60>; |
| 806 |
cdns,read-delay = <4>; |
| 807 |
|
| 808 |
partitions { |
| 809 |
compatible = "fixed-partitions"; |
| 810 |
#address-cells = <1>; |
| 811 |
#size-cells = <1>; |
| 812 |
|
| 813 |
partition@0 { |
| 814 |
label = "ospi.tiboot3"; |
| 815 |
reg = <0x0 0x80000>; |
| 816 |
}; |
| 817 |
|
| 818 |
partition@80000 { |
| 819 |
label = "ospi.tispl"; |
| 820 |
reg = <0x80000 0x200000>; |
| 821 |
}; |
| 822 |
|
| 823 |
partition@280000 { |
| 824 |
label = "ospi.u-boot"; |
| 825 |
reg = <0x280000 0x400000>; |
| 826 |
}; |
| 827 |
|
| 828 |
partition@680000 { |
| 829 |
label = "ospi.env"; |
| 830 |
reg = <0x680000 0x40000>; |
| 831 |
}; |
| 832 |
|
| 833 |
partition@6c0000 { |
| 834 |
label = "ospi.sysfw"; |
| 835 |
reg = <0x6c0000 0x100000>; |
| 836 |
}; |
| 837 |
|
| 838 |
partition@7c0000 { |
| 839 |
label = "ospi.env.backup"; |
| 840 |
reg = <0x7c0000 0x40000>; |
| 841 |
}; |
| 842 |
|
| 843 |
partition@800000 { |
| 844 |
label = "ospi.rootfs"; |
| 845 |
reg = <0x800000 0x37c0000>; |
| 846 |
}; |
| 847 |
|
| 848 |
partition@3fc0000 { |
| 849 |
label = "ospi.phypattern"; |
| 850 |
reg = <0x3fc0000 0x40000>; |
| 851 |
bootph-all; |
| 852 |
}; |
| 853 |
}; |
| 854 |
}; |
| 855 |
}; |
| 856 |
|
| 857 |
&main_i2c0 { |
| 858 |
status = "okay"; |
| 859 |
pinctrl-names = "default"; |
| 860 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 861 |
clock-frequency = <400000>; |
| 862 |
|
| 863 |
i2c-mux@71 { |
| 864 |
compatible = "nxp,pca9543"; |
| 865 |
#address-cells = <1>; |
| 866 |
#size-cells = <0>; |
| 867 |
reg = <0x71>; |
| 868 |
|
| 869 |
/* PCIe1 M.2 M Key I2C */ |
| 870 |
i2c@0 { |
| 871 |
#address-cells = <1>; |
| 872 |
#size-cells = <0>; |
| 873 |
reg = <0>; |
| 874 |
}; |
| 875 |
|
| 876 |
/* PCIe0 M.2 E Key I2C */ |
| 877 |
i2c@1 { |
| 878 |
#address-cells = <1>; |
| 879 |
#size-cells = <0>; |
| 880 |
reg = <1>; |
| 881 |
}; |
| 882 |
}; |
| 883 |
}; |
| 884 |
|
| 885 |
&main_i2c1 { |
| 886 |
status = "okay"; |
| 887 |
pinctrl-names = "default"; |
| 888 |
pinctrl-0 = <&main_i2c1_pins_default>; |
| 889 |
/* i2c1 is used for DVI DDC, so we need to use 100kHz */ |
| 890 |
clock-frequency = <100000>; |
| 891 |
}; |
| 892 |
|
| 893 |
&main_i2c3 { |
| 894 |
status = "okay"; |
| 895 |
pinctrl-names = "default"; |
| 896 |
pinctrl-0 = <&main_i2c3_pins_default>; |
| 897 |
clock-frequency = <400000>; |
| 898 |
|
| 899 |
i2c-mux@70 { |
| 900 |
compatible = "nxp,pca9543"; |
| 901 |
#address-cells = <1>; |
| 902 |
#size-cells = <0>; |
| 903 |
reg = <0x70>; |
| 904 |
|
| 905 |
/* CSI0 I2C */ |
| 906 |
cam0_i2c: i2c@0 { |
| 907 |
#address-cells = <1>; |
| 908 |
#size-cells = <0>; |
| 909 |
reg = <0>; |
| 910 |
}; |
| 911 |
|
| 912 |
/* CSI1 I2C */ |
| 913 |
cam1_i2c: i2c@1 { |
| 914 |
#address-cells = <1>; |
| 915 |
#size-cells = <0>; |
| 916 |
reg = <1>; |
| 917 |
}; |
| 918 |
}; |
| 919 |
}; |
| 920 |
|
| 921 |
&main_i2c5 { |
| 922 |
/* Brought out on RPi Header */ |
| 923 |
status = "okay"; |
| 924 |
pinctrl-names = "default"; |
| 925 |
pinctrl-0 = <&main_i2c5_pins_default>; |
| 926 |
clock-frequency = <400000>; |
| 927 |
}; |
| 928 |
|
| 929 |
&main_gpio0 { |
| 930 |
status = "okay"; |
| 931 |
pinctrl-names = "default"; |
| 932 |
pinctrl-0 = <&rpi_header_gpio0_pins_default>; |
| 933 |
}; |
| 934 |
|
| 935 |
&main_gpio1 { |
| 936 |
status = "okay"; |
| 937 |
pinctrl-names = "default"; |
| 938 |
pinctrl-0 = <&rpi_header_gpio1_pins_default>; |
| 939 |
}; |
| 940 |
|
| 941 |
&wkup_gpio0 { |
| 942 |
status = "okay"; |
| 943 |
}; |
| 944 |
|
| 945 |
&usb_serdes_mux { |
| 946 |
idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ |
| 947 |
bootph-all; |
| 948 |
}; |
| 949 |
|
| 950 |
&serdes_ln_ctrl { |
| 951 |
idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>, |
| 952 |
<J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, |
| 953 |
<J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>, |
| 954 |
<J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, |
| 955 |
<J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, |
| 956 |
<J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; |
| 957 |
bootph-all; |
| 958 |
}; |
| 959 |
|
| 960 |
&serdes_wiz3 { |
| 961 |
typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; |
| 962 |
typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ |
| 963 |
}; |
| 964 |
|
| 965 |
&serdes3 { |
| 966 |
serdes3_usb_link: phy@0 { |
| 967 |
reg = <0>; |
| 968 |
cdns,num-lanes = <2>; |
| 969 |
#phy-cells = <0>; |
| 970 |
cdns,phy-type = <PHY_TYPE_USB3>; |
| 971 |
resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; |
| 972 |
bootph-all; |
| 973 |
}; |
| 974 |
}; |
| 975 |
|
| 976 |
&serdes4 { |
| 977 |
torrent_phy_dp: phy@0 { |
| 978 |
reg = <0>; |
| 979 |
resets = <&serdes_wiz4 1>; |
| 980 |
cdns,phy-type = <PHY_TYPE_DP>; |
| 981 |
cdns,num-lanes = <4>; |
| 982 |
cdns,max-bit-rate = <5400>; |
| 983 |
#phy-cells = <0>; |
| 984 |
}; |
| 985 |
}; |
| 986 |
|
| 987 |
&mhdp { |
| 988 |
phys = <&torrent_phy_dp>; |
| 989 |
phy-names = "dpphy"; |
| 990 |
pinctrl-names = "default"; |
| 991 |
pinctrl-0 = <&dp0_pins_default>; |
| 992 |
}; |
| 993 |
|
| 994 |
&usbss0 { |
| 995 |
pinctrl-names = "default"; |
| 996 |
pinctrl-0 = <&main_usbss0_pins_default>; |
| 997 |
bootph-all; |
| 998 |
ti,vbus-divider; |
| 999 |
}; |
| 1000 |
|
| 1001 |
&usb0 { |
| 1002 |
dr_mode = "otg"; |
| 1003 |
maximum-speed = "super-speed"; |
| 1004 |
phys = <&serdes3_usb_link>; |
| 1005 |
phy-names = "cdns3,usb3-phy"; |
| 1006 |
bootph-all; |
| 1007 |
}; |
| 1008 |
|
| 1009 |
&serdes2 { |
| 1010 |
serdes2_usb_link: phy@1 { |
| 1011 |
reg = <1>; |
| 1012 |
cdns,num-lanes = <1>; |
| 1013 |
#phy-cells = <0>; |
| 1014 |
cdns,phy-type = <PHY_TYPE_USB3>; |
| 1015 |
resets = <&serdes_wiz2 2>; |
| 1016 |
}; |
| 1017 |
}; |
| 1018 |
|
| 1019 |
&usbss1 { |
| 1020 |
pinctrl-names = "default"; |
| 1021 |
pinctrl-0 = <&main_usbss1_pins_default>; |
| 1022 |
bootph-all; |
| 1023 |
ti,vbus-divider; |
| 1024 |
}; |
| 1025 |
|
| 1026 |
&usb1 { |
| 1027 |
dr_mode = "host"; |
| 1028 |
maximum-speed = "super-speed"; |
| 1029 |
phys = <&serdes2_usb_link>; |
| 1030 |
phy-names = "cdns3,usb3-phy"; |
| 1031 |
bootph-all; |
| 1032 |
}; |
| 1033 |
|
| 1034 |
&mcu_cpsw { |
| 1035 |
pinctrl-names = "default"; |
| 1036 |
pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; |
| 1037 |
status = "okay"; |
| 1038 |
}; |
| 1039 |
|
| 1040 |
&davinci_mdio { |
| 1041 |
phy0: ethernet-phy@0 { |
| 1042 |
reg = <0>; |
| 1043 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 1044 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 1045 |
}; |
| 1046 |
}; |
| 1047 |
|
| 1048 |
&cpsw_port1 { |
| 1049 |
phy-mode = "rgmii-id"; |
| 1050 |
phy-handle = <&phy0>; |
| 1051 |
}; |
| 1052 |
|
| 1053 |
&dss { |
| 1054 |
pinctrl-names = "default"; |
| 1055 |
pinctrl-0 = <&dss_vout0_pins_default>; |
| 1056 |
|
| 1057 |
assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */ |
| 1058 |
<&k3_clks 152 4>, /* VP 2 pixel clock */ |
| 1059 |
<&k3_clks 152 9>, /* VP 3 pixel clock */ |
| 1060 |
<&k3_clks 152 13>; /* VP 4 pixel clock */ |
| 1061 |
assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */ |
| 1062 |
<&k3_clks 152 6>, /* DPI0_EXT_CLKSEL_OUT0 */ |
| 1063 |
<&k3_clks 152 11>, /* PLL18_HSDIV0 */ |
| 1064 |
<&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ |
| 1065 |
}; |
| 1066 |
|
| 1067 |
&dss_ports { |
| 1068 |
#address-cells = <1>; |
| 1069 |
#size-cells = <0>; |
| 1070 |
|
| 1071 |
port@0 { |
| 1072 |
reg = <0>; |
| 1073 |
|
| 1074 |
dpi0_out: endpoint { |
| 1075 |
remote-endpoint = <&dp0_in>; |
| 1076 |
}; |
| 1077 |
}; |
| 1078 |
|
| 1079 |
port@1 { |
| 1080 |
reg = <1>; |
| 1081 |
|
| 1082 |
dpi1_out: endpoint { |
| 1083 |
remote-endpoint = <&tfp410_in>; |
| 1084 |
}; |
| 1085 |
}; |
| 1086 |
}; |
| 1087 |
|
| 1088 |
&dp0_ports { |
| 1089 |
#address-cells = <1>; |
| 1090 |
#size-cells = <0>; |
| 1091 |
|
| 1092 |
port@0 { |
| 1093 |
reg = <0>; |
| 1094 |
dp0_in: endpoint { |
| 1095 |
remote-endpoint = <&dpi0_out>; |
| 1096 |
}; |
| 1097 |
}; |
| 1098 |
|
| 1099 |
port@4 { |
| 1100 |
reg = <4>; |
| 1101 |
dp0_out: endpoint { |
| 1102 |
remote-endpoint = <&dp_connector_in>; |
| 1103 |
}; |
| 1104 |
}; |
| 1105 |
}; |
| 1106 |
|
| 1107 |
&serdes0 { |
| 1108 |
serdes0_pcie_link: phy@0 { |
| 1109 |
reg = <0>; |
| 1110 |
cdns,num-lanes = <1>; |
| 1111 |
#phy-cells = <0>; |
| 1112 |
cdns,phy-type = <PHY_TYPE_PCIE>; |
| 1113 |
resets = <&serdes_wiz0 1>; |
| 1114 |
}; |
| 1115 |
}; |
| 1116 |
|
| 1117 |
&serdes1 { |
| 1118 |
serdes1_pcie_link: phy@0 { |
| 1119 |
reg = <0>; |
| 1120 |
cdns,num-lanes = <2>; |
| 1121 |
#phy-cells = <0>; |
| 1122 |
cdns,phy-type = <PHY_TYPE_PCIE>; |
| 1123 |
resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; |
| 1124 |
}; |
| 1125 |
}; |
| 1126 |
|
| 1127 |
&pcie0_rc { |
| 1128 |
status = "okay"; |
| 1129 |
pinctrl-names = "default"; |
| 1130 |
pinctrl-0 = <&ekey_reset_pins_default>; |
| 1131 |
reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; |
| 1132 |
|
| 1133 |
phys = <&serdes0_pcie_link>; |
| 1134 |
phy-names = "pcie-phy"; |
| 1135 |
num-lanes = <1>; |
| 1136 |
}; |
| 1137 |
|
| 1138 |
&pcie1_rc { |
| 1139 |
status = "okay"; |
| 1140 |
pinctrl-names = "default"; |
| 1141 |
pinctrl-0 = <&mkey_reset_pins_default>; |
| 1142 |
reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; |
| 1143 |
|
| 1144 |
phys = <&serdes1_pcie_link>; |
| 1145 |
phy-names = "pcie-phy"; |
| 1146 |
num-lanes = <2>; |
| 1147 |
}; |
| 1148 |
|
| 1149 |
&mcu_mcan0 { |
| 1150 |
pinctrl-names = "default"; |
| 1151 |
pinctrl-0 = <&mcu_mcan0_pins_default>; |
| 1152 |
phys = <&transceiver1>; |
| 1153 |
status = "okay"; |
| 1154 |
}; |
| 1155 |
|
| 1156 |
&main_mcan0 { |
| 1157 |
pinctrl-names = "default"; |
| 1158 |
pinctrl-0 = <&main_mcan0_pins_default>; |
| 1159 |
phys = <&transceiver2>; |
| 1160 |
status = "okay"; |
| 1161 |
}; |
| 1162 |
|
| 1163 |
&main_mcan5 { |
| 1164 |
pinctrl-names = "default"; |
| 1165 |
pinctrl-0 = <&main_mcan5_pins_default>; |
| 1166 |
phys = <&transceiver3>; |
| 1167 |
status = "okay"; |
| 1168 |
}; |
| 1169 |
|
| 1170 |
&main_mcan9 { |
| 1171 |
pinctrl-names = "default"; |
| 1172 |
pinctrl-0 = <&main_mcan9_pins_default>; |
| 1173 |
phys = <&transceiver4>; |
| 1174 |
status = "okay"; |
| 1175 |
}; |
| 1176 |
|
| 1177 |
&ufs_wrapper { |
| 1178 |
status = "disabled"; |
| 1179 |
}; |
| 1180 |
|
| 1181 |
#include "k3-j721e-ti-ipc-firmware.dtsi" |