| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "k3-j7200-som-p0.dtsi" |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/net/ti-dp83867.h> |
| 11 |
#include <dt-bindings/phy/phy.h> |
| 12 |
|
| 13 |
#include "k3-serdes.h" |
| 14 |
|
| 15 |
/ { |
| 16 |
compatible = "ti,j7200-evm", "ti,j7200"; |
| 17 |
model = "Texas Instruments J7200 EVM"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &wkup_uart0; |
| 21 |
serial1 = &mcu_uart0; |
| 22 |
serial2 = &main_uart0; |
| 23 |
serial3 = &main_uart1; |
| 24 |
serial5 = &main_uart3; |
| 25 |
mmc0 = &main_sdhci0; |
| 26 |
mmc1 = &main_sdhci1; |
| 27 |
}; |
| 28 |
|
| 29 |
chosen { |
| 30 |
stdout-path = "serial2:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
evm_12v0: fixedregulator-evm12v0 { |
| 34 |
/* main supply */ |
| 35 |
compatible = "regulator-fixed"; |
| 36 |
regulator-name = "evm_12v0"; |
| 37 |
regulator-min-microvolt = <12000000>; |
| 38 |
regulator-max-microvolt = <12000000>; |
| 39 |
regulator-always-on; |
| 40 |
regulator-boot-on; |
| 41 |
}; |
| 42 |
|
| 43 |
vsys_3v3: fixedregulator-vsys3v3 { |
| 44 |
/* Output of LM5140 */ |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
regulator-name = "vsys_3v3"; |
| 47 |
regulator-min-microvolt = <3300000>; |
| 48 |
regulator-max-microvolt = <3300000>; |
| 49 |
vin-supply = <&evm_12v0>; |
| 50 |
regulator-always-on; |
| 51 |
regulator-boot-on; |
| 52 |
}; |
| 53 |
|
| 54 |
vsys_5v0: fixedregulator-vsys5v0 { |
| 55 |
/* Output of LM5140 */ |
| 56 |
compatible = "regulator-fixed"; |
| 57 |
regulator-name = "vsys_5v0"; |
| 58 |
regulator-min-microvolt = <5000000>; |
| 59 |
regulator-max-microvolt = <5000000>; |
| 60 |
vin-supply = <&evm_12v0>; |
| 61 |
regulator-always-on; |
| 62 |
regulator-boot-on; |
| 63 |
}; |
| 64 |
|
| 65 |
vdd_mmc1: fixedregulator-sd { |
| 66 |
/* Output of TPS22918 */ |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
regulator-name = "vdd_mmc1"; |
| 69 |
regulator-min-microvolt = <3300000>; |
| 70 |
regulator-max-microvolt = <3300000>; |
| 71 |
regulator-boot-on; |
| 72 |
enable-active-high; |
| 73 |
vin-supply = <&vsys_3v3>; |
| 74 |
gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; |
| 75 |
}; |
| 76 |
|
| 77 |
vdd_sd_dv: gpio-regulator-TLV71033 { |
| 78 |
/* Output of TLV71033 */ |
| 79 |
compatible = "regulator-gpio"; |
| 80 |
regulator-name = "tlv71033"; |
| 81 |
pinctrl-names = "default"; |
| 82 |
pinctrl-0 = <&vdd_sd_dv_pins_default>; |
| 83 |
regulator-min-microvolt = <1800000>; |
| 84 |
regulator-max-microvolt = <3300000>; |
| 85 |
regulator-boot-on; |
| 86 |
vin-supply = <&vsys_5v0>; |
| 87 |
gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>; |
| 88 |
states = <1800000 0x0>, |
| 89 |
<3300000 0x1>; |
| 90 |
}; |
| 91 |
|
| 92 |
transceiver1: can-phy1 { |
| 93 |
compatible = "ti,tcan1043"; |
| 94 |
#phy-cells = <0>; |
| 95 |
max-bitrate = <5000000>; |
| 96 |
pinctrl-names = "default"; |
| 97 |
pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; |
| 98 |
standby-gpios = <&wkup_gpio0 58 GPIO_ACTIVE_LOW>; |
| 99 |
enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>; |
| 100 |
}; |
| 101 |
|
| 102 |
transceiver2: can-phy2 { |
| 103 |
compatible = "ti,tcan1042"; |
| 104 |
#phy-cells = <0>; |
| 105 |
max-bitrate = <5000000>; |
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; |
| 108 |
standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; |
| 109 |
}; |
| 110 |
|
| 111 |
transceiver3: can-phy3 { |
| 112 |
compatible = "ti,tcan1043"; |
| 113 |
#phy-cells = <0>; |
| 114 |
max-bitrate = <5000000>; |
| 115 |
standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>; |
| 116 |
enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; |
| 117 |
mux-states = <&mux0 1>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
&wkup_pmx0 { |
| 122 |
}; |
| 123 |
|
| 124 |
&wkup_pmx2 { |
| 125 |
mcu_uart0_pins_default: mcu-uart0-default-pins { |
| 126 |
pinctrl-single,pins = < |
| 127 |
J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ |
| 128 |
J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ |
| 129 |
J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ |
| 130 |
J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ |
| 131 |
>; |
| 132 |
bootph-all; |
| 133 |
}; |
| 134 |
|
| 135 |
wkup_uart0_pins_default: wkup-uart0-default-pins { |
| 136 |
pinctrl-single,pins = < |
| 137 |
J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ |
| 138 |
J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ |
| 139 |
>; |
| 140 |
bootph-all; |
| 141 |
}; |
| 142 |
|
| 143 |
mcu_cpsw_pins_default: mcu-cpsw-default-pins { |
| 144 |
pinctrl-single,pins = < |
| 145 |
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ |
| 146 |
J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ |
| 147 |
J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ |
| 148 |
J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ |
| 149 |
J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ |
| 150 |
J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ |
| 151 |
J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ |
| 152 |
J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ |
| 153 |
J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ |
| 154 |
J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ |
| 155 |
J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ |
| 156 |
J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ |
| 157 |
>; |
| 158 |
}; |
| 159 |
|
| 160 |
wkup_gpio_pins_default: wkup-gpio-default-pins { |
| 161 |
pinctrl-single,pins = < |
| 162 |
J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */ |
| 163 |
>; |
| 164 |
}; |
| 165 |
|
| 166 |
mcu_mdio_pins_default: mcu-mdio1-default-pins { |
| 167 |
pinctrl-single,pins = < |
| 168 |
J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ |
| 169 |
J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ |
| 170 |
>; |
| 171 |
}; |
| 172 |
|
| 173 |
mcu_mcan0_pins_default: mcu-mcan0-default-pins { |
| 174 |
pinctrl-single,pins = < |
| 175 |
J721E_WKUP_IOPAD(0x54, PIN_INPUT, 0) /* (A17) MCU_MCAN0_RX */ |
| 176 |
J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (A16) MCU_MCAN0_TX */ |
| 177 |
>; |
| 178 |
}; |
| 179 |
|
| 180 |
mcu_mcan1_pins_default: mcu-mcan1-default-pins { |
| 181 |
pinctrl-single,pins = < |
| 182 |
J721E_WKUP_IOPAD(0x6c, PIN_INPUT, 0) /* (B16) WKUP_GPIO0_5.MCU_MCAN1_RX */ |
| 183 |
J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (D13) WKUP_GPIO0_4.MCU_MCAN1_TX */ |
| 184 |
>; |
| 185 |
}; |
| 186 |
|
| 187 |
mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { |
| 188 |
pinctrl-single,pins = < |
| 189 |
J721E_WKUP_IOPAD(0x58, PIN_INPUT, 7) /* (B18) WKUP_GPIO0_0 */ |
| 190 |
J721E_WKUP_IOPAD(0x40, PIN_INPUT, 7) /* (B17) MCU_SPI0_D1 */ |
| 191 |
>; |
| 192 |
}; |
| 193 |
|
| 194 |
mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { |
| 195 |
pinctrl-single,pins = < |
| 196 |
J721E_WKUP_IOPAD(0x60, PIN_INPUT, 7) /* (D14) WKUP_GPIO0_2 */ |
| 197 |
>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
&main_pmx0 { |
| 202 |
main_uart0_pins_default: main-uart0-default-pins { |
| 203 |
pinctrl-single,pins = < |
| 204 |
J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ |
| 205 |
J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ |
| 206 |
J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ |
| 207 |
J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ |
| 208 |
>; |
| 209 |
bootph-all; |
| 210 |
}; |
| 211 |
|
| 212 |
main_uart1_pins_default: main-uart1-default-pins { |
| 213 |
pinctrl-single,pins = < |
| 214 |
J721E_IOPAD(0xb8, PIN_INPUT, 0) /* (T18) UART1_RXD */ |
| 215 |
J721E_IOPAD(0xbc, PIN_INPUT, 0) /* (T20) UART1_TXD */ |
| 216 |
>; |
| 217 |
}; |
| 218 |
|
| 219 |
main_uart3_pins_default: main-uart3-default-pins { |
| 220 |
pinctrl-single,pins = < |
| 221 |
J721E_IOPAD(0x60, PIN_INPUT, 11) /* (T15) MCAN8_TX.UART3_CTSn */ |
| 222 |
J721E_IOPAD(0x30, PIN_INPUT, 11) /* (Y18) MCAN2_TX.UART3_RXD */ |
| 223 |
>; |
| 224 |
}; |
| 225 |
|
| 226 |
main_i2c1_pins_default: main-i2c1-default-pins { |
| 227 |
pinctrl-single,pins = < |
| 228 |
J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ |
| 229 |
J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */ |
| 230 |
>; |
| 231 |
}; |
| 232 |
|
| 233 |
main_mmc1_pins_default: main-mmc1-default-pins { |
| 234 |
pinctrl-single,pins = < |
| 235 |
J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */ |
| 236 |
J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */ |
| 237 |
J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ |
| 238 |
J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */ |
| 239 |
J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */ |
| 240 |
J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */ |
| 241 |
J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */ |
| 242 |
J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */ |
| 243 |
>; |
| 244 |
bootph-all; |
| 245 |
}; |
| 246 |
|
| 247 |
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { |
| 248 |
pinctrl-single,pins = < |
| 249 |
J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ |
| 250 |
>; |
| 251 |
}; |
| 252 |
|
| 253 |
main_mcan3_pins_default: main-mcan3-default-pins { |
| 254 |
pinctrl-single,pins = < |
| 255 |
J721E_IOPAD(0x3c, PIN_INPUT, 0) /* (W16) MCAN3_RX */ |
| 256 |
J721E_IOPAD(0x38, PIN_OUTPUT, 0) /* (Y21) MCAN3_TX */ |
| 257 |
>; |
| 258 |
}; |
| 259 |
}; |
| 260 |
|
| 261 |
&main_pmx2 { |
| 262 |
main_usbss0_pins_default: main-usbss0-default-pins { |
| 263 |
pinctrl-single,pins = < |
| 264 |
J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ |
| 265 |
>; |
| 266 |
bootph-all; |
| 267 |
}; |
| 268 |
}; |
| 269 |
|
| 270 |
&wkup_uart0 { |
| 271 |
/* Wakeup UART is used by System firmware */ |
| 272 |
status = "reserved"; |
| 273 |
pinctrl-names = "default"; |
| 274 |
pinctrl-0 = <&wkup_uart0_pins_default>; |
| 275 |
bootph-all; |
| 276 |
}; |
| 277 |
|
| 278 |
&mcu_uart0 { |
| 279 |
status = "okay"; |
| 280 |
pinctrl-names = "default"; |
| 281 |
pinctrl-0 = <&mcu_uart0_pins_default>; |
| 282 |
bootph-all; |
| 283 |
}; |
| 284 |
|
| 285 |
&main_uart0 { |
| 286 |
status = "okay"; |
| 287 |
/* Shared with ATF on this platform */ |
| 288 |
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; |
| 289 |
pinctrl-names = "default"; |
| 290 |
pinctrl-0 = <&main_uart0_pins_default>; |
| 291 |
bootph-all; |
| 292 |
}; |
| 293 |
|
| 294 |
&main_uart1 { |
| 295 |
status = "okay"; |
| 296 |
/* Default pinmux */ |
| 297 |
pinctrl-names = "default"; |
| 298 |
pinctrl-0 = <&main_uart1_pins_default>; |
| 299 |
}; |
| 300 |
|
| 301 |
&main_uart2 { |
| 302 |
/* MAIN UART 2 is used by R5F firmware */ |
| 303 |
status = "reserved"; |
| 304 |
}; |
| 305 |
|
| 306 |
&main_uart3 { |
| 307 |
/* Shared with MCAN Interface */ |
| 308 |
status = "okay"; |
| 309 |
pinctrl-names = "default"; |
| 310 |
pinctrl-0 = <&main_uart3_pins_default>; |
| 311 |
}; |
| 312 |
|
| 313 |
&main_gpio0 { |
| 314 |
status = "okay"; |
| 315 |
}; |
| 316 |
|
| 317 |
&wkup_gpio0 { |
| 318 |
status = "okay"; |
| 319 |
pinctrl-names = "default"; |
| 320 |
pinctrl-0 = <&wkup_gpio_pins_default>; |
| 321 |
}; |
| 322 |
|
| 323 |
&mcu_cpsw { |
| 324 |
pinctrl-names = "default"; |
| 325 |
pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; |
| 326 |
status = "okay"; |
| 327 |
}; |
| 328 |
|
| 329 |
&davinci_mdio { |
| 330 |
phy0: ethernet-phy@0 { |
| 331 |
reg = <0>; |
| 332 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 333 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 334 |
}; |
| 335 |
}; |
| 336 |
|
| 337 |
&cpsw_port1 { |
| 338 |
phy-mode = "rgmii-id"; |
| 339 |
phy-handle = <&phy0>; |
| 340 |
}; |
| 341 |
|
| 342 |
&main_i2c0 { |
| 343 |
status = "okay"; |
| 344 |
pinctrl-names = "default"; |
| 345 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 346 |
clock-frequency = <400000>; |
| 347 |
|
| 348 |
exp1: gpio@20 { |
| 349 |
compatible = "ti,tca6416"; |
| 350 |
reg = <0x20>; |
| 351 |
gpio-controller; |
| 352 |
#gpio-cells = <2>; |
| 353 |
}; |
| 354 |
|
| 355 |
exp2: gpio@22 { |
| 356 |
compatible = "ti,tca6424"; |
| 357 |
reg = <0x22>; |
| 358 |
gpio-controller; |
| 359 |
#gpio-cells = <2>; |
| 360 |
}; |
| 361 |
}; |
| 362 |
|
| 363 |
/* |
| 364 |
* The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be |
| 365 |
* swapped on the CPB. |
| 366 |
* |
| 367 |
* main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3. |
| 368 |
* The i2c1 of the CPB (as it is labeled) is not connected to j7200. |
| 369 |
*/ |
| 370 |
&main_i2c1 { |
| 371 |
status = "okay"; |
| 372 |
pinctrl-names = "default"; |
| 373 |
pinctrl-0 = <&main_i2c1_pins_default>; |
| 374 |
clock-frequency = <400000>; |
| 375 |
|
| 376 |
exp3: gpio@20 { |
| 377 |
compatible = "ti,tca6408"; |
| 378 |
reg = <0x20>; |
| 379 |
gpio-controller; |
| 380 |
#gpio-cells = <2>; |
| 381 |
gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn", |
| 382 |
"UB926_LOCK", "UB926_PWR_SW_CNTRL", |
| 383 |
"UB926_TUNER_RESET", "UB926_GPIO_SPARE", ""; |
| 384 |
}; |
| 385 |
}; |
| 386 |
|
| 387 |
&main_sdhci0 { |
| 388 |
/* eMMC */ |
| 389 |
status = "okay"; |
| 390 |
non-removable; |
| 391 |
bootph-all; |
| 392 |
ti,driver-strength-ohm = <50>; |
| 393 |
disable-wp; |
| 394 |
}; |
| 395 |
|
| 396 |
&main_sdhci1 { |
| 397 |
/* SD card */ |
| 398 |
status = "okay"; |
| 399 |
pinctrl-0 = <&main_mmc1_pins_default>; |
| 400 |
pinctrl-names = "default"; |
| 401 |
vmmc-supply = <&vdd_mmc1>; |
| 402 |
vqmmc-supply = <&vdd_sd_dv>; |
| 403 |
bootph-all; |
| 404 |
ti,driver-strength-ohm = <50>; |
| 405 |
disable-wp; |
| 406 |
}; |
| 407 |
|
| 408 |
&serdes_ln_ctrl { |
| 409 |
idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>, |
| 410 |
<J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>; |
| 411 |
}; |
| 412 |
|
| 413 |
&mcu_spi1 { |
| 414 |
mux-controls = <&spi1_linkdis 0>; |
| 415 |
}; |
| 416 |
|
| 417 |
&usb_serdes_mux { |
| 418 |
idle-states = <1>; /* USB0 to SERDES lane 3 */ |
| 419 |
bootph-all; |
| 420 |
}; |
| 421 |
|
| 422 |
&usbss0 { |
| 423 |
pinctrl-names = "default"; |
| 424 |
pinctrl-0 = <&main_usbss0_pins_default>; |
| 425 |
bootph-all; |
| 426 |
ti,vbus-divider; |
| 427 |
ti,usb2-only; |
| 428 |
}; |
| 429 |
|
| 430 |
&usb0 { |
| 431 |
dr_mode = "otg"; |
| 432 |
maximum-speed = "high-speed"; |
| 433 |
bootph-all; |
| 434 |
}; |
| 435 |
|
| 436 |
&tscadc0 { |
| 437 |
adc { |
| 438 |
ti,adc-channels = <0 1 2 3 4 5 6 7>; |
| 439 |
}; |
| 440 |
}; |
| 441 |
|
| 442 |
&serdes_refclk { |
| 443 |
clock-frequency = <100000000>; |
| 444 |
}; |
| 445 |
|
| 446 |
&serdes0 { |
| 447 |
serdes0_pcie_link: phy@0 { |
| 448 |
reg = <0>; |
| 449 |
cdns,num-lanes = <2>; |
| 450 |
#phy-cells = <0>; |
| 451 |
cdns,phy-type = <PHY_TYPE_PCIE>; |
| 452 |
resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; |
| 453 |
}; |
| 454 |
|
| 455 |
serdes0_qsgmii_link: phy@1 { |
| 456 |
reg = <2>; |
| 457 |
cdns,num-lanes = <1>; |
| 458 |
#phy-cells = <0>; |
| 459 |
cdns,phy-type = <PHY_TYPE_QSGMII>; |
| 460 |
resets = <&serdes_wiz0 3>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
|
| 464 |
&pcie1_rc { |
| 465 |
status = "okay"; |
| 466 |
reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; |
| 467 |
phys = <&serdes0_pcie_link>; |
| 468 |
phy-names = "pcie-phy"; |
| 469 |
num-lanes = <2>; |
| 470 |
}; |
| 471 |
|
| 472 |
&mcu_mcan0 { |
| 473 |
status = "okay"; |
| 474 |
pinctrl-names = "default"; |
| 475 |
pinctrl-0 = <&mcu_mcan0_pins_default>; |
| 476 |
phys = <&transceiver1>; |
| 477 |
}; |
| 478 |
|
| 479 |
&mcu_mcan1 { |
| 480 |
status = "okay"; |
| 481 |
pinctrl-names = "default"; |
| 482 |
pinctrl-0 = <&mcu_mcan1_pins_default>; |
| 483 |
phys = <&transceiver2>; |
| 484 |
}; |
| 485 |
|
| 486 |
&main_mcan3 { |
| 487 |
status = "okay"; |
| 488 |
pinctrl-names = "default"; |
| 489 |
pinctrl-0 = <&main_mcan3_pins_default>; |
| 490 |
phys = <&transceiver3>; |
| 491 |
}; |