| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2025 Toradex |
| 4 |
* |
| 5 |
* https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 |
| 6 |
* https://www.toradex.com/products/carrier-board/aquila-development-board-kit |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/pwm/pwm.h> |
| 12 |
#include "k3-am69-aquila.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Toradex Aquila AM69 on Aquila Development Board"; |
| 16 |
compatible = "toradex,aquila-am69-dev", |
| 17 |
"toradex,aquila-am69", |
| 18 |
"ti,j784s4"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
eeprom1 = &carrier_eeprom; |
| 22 |
}; |
| 23 |
|
| 24 |
reg_1v8_sw: regulator-1v8-sw { |
| 25 |
compatible = "regulator-fixed"; |
| 26 |
regulator-max-microvolt = <1800000>; |
| 27 |
regulator-min-microvolt = <1800000>; |
| 28 |
regulator-name = "Carrier_1V8"; |
| 29 |
}; |
| 30 |
|
| 31 |
reg_3v3_dp: regulator-3v3-dp { |
| 32 |
compatible = "regulator-fixed"; |
| 33 |
pinctrl-names = "default"; |
| 34 |
pinctrl-0 = <&pinctrl_gpio_21_dp>; |
| 35 |
/* Aquila GPIO_21_DP (AQUILA B57) */ |
| 36 |
gpio = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; |
| 37 |
enable-active-high; |
| 38 |
regulator-max-microvolt = <3300000>; |
| 39 |
regulator-min-microvolt = <3300000>; |
| 40 |
regulator-name = "DP_3V3"; |
| 41 |
startup-delay-us = <10000>; |
| 42 |
}; |
| 43 |
|
| 44 |
dp0-connector { |
| 45 |
compatible = "dp-connector"; |
| 46 |
dp-pwr-supply = <®_3v3_dp>; |
| 47 |
label = "Display Port"; |
| 48 |
type = "full-size"; |
| 49 |
|
| 50 |
port { |
| 51 |
dp0_connector_in: endpoint { |
| 52 |
remote-endpoint = <&dp0_out>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
sound { |
| 58 |
compatible = "simple-audio-card"; |
| 59 |
simple-audio-card,bitclock-master = <&codec_dai>; |
| 60 |
simple-audio-card,format = "i2s"; |
| 61 |
simple-audio-card,frame-master = <&codec_dai>; |
| 62 |
simple-audio-card,name = "aquila-wm8904"; |
| 63 |
simple-audio-card,mclk-fs = <256>; |
| 64 |
simple-audio-card,routing = |
| 65 |
"Headphone Jack", "HPOUTL", |
| 66 |
"Headphone Jack", "HPOUTR", |
| 67 |
"IN2L", "Line In Jack", |
| 68 |
"IN2R", "Line In Jack", |
| 69 |
"Microphone Jack", "MICBIAS", |
| 70 |
"IN1L", "Microphone Jack", |
| 71 |
"IN1R", "Digital Mic"; |
| 72 |
simple-audio-card,widgets = |
| 73 |
"Microphone", "Microphone Jack", |
| 74 |
"Microphone", "Digital Mic", |
| 75 |
"Headphone", "Headphone Jack", |
| 76 |
"Line", "Line In Jack"; |
| 77 |
|
| 78 |
codec_dai: simple-audio-card,codec { |
| 79 |
sound-dai = <&wm8904_1a>; |
| 80 |
}; |
| 81 |
|
| 82 |
simple-audio-card,cpu { |
| 83 |
sound-dai = <&mcasp4>; |
| 84 |
}; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
/* Aquila CTRL_PWR_BTN_MICO# */ |
| 89 |
&aquila_key_power { |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
/* Aquila CTRL_WAKE1_MICO# */ |
| 94 |
&aquila_key_wake { |
| 95 |
status = "okay"; |
| 96 |
}; |
| 97 |
|
| 98 |
/* On-module ETH_1 MDIO */ |
| 99 |
&davinci_mdio { |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&dp0_ports { |
| 104 |
port@4 { |
| 105 |
reg = <4>; |
| 106 |
dp0_out: endpoint { |
| 107 |
remote-endpoint = <&dp0_connector_in>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
}; |
| 111 |
|
| 112 |
&dss { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&main0_thermal { |
| 117 |
cooling-maps { |
| 118 |
map0 { |
| 119 |
cooling-device = <&fan 1 1>; |
| 120 |
trip = <&main0_alert0>; |
| 121 |
}; |
| 122 |
|
| 123 |
map1 { |
| 124 |
cooling-device = <&fan 2 2>; |
| 125 |
trip = <&main0_alert1>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
&main1_thermal { |
| 131 |
cooling-maps { |
| 132 |
map0 { |
| 133 |
cooling-device = <&fan 1 1>; |
| 134 |
trip = <&main1_alert0>; |
| 135 |
}; |
| 136 |
|
| 137 |
map1 { |
| 138 |
cooling-device = <&fan 2 2>; |
| 139 |
trip = <&main1_alert1>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
&main2_thermal { |
| 145 |
cooling-maps { |
| 146 |
map0 { |
| 147 |
cooling-device = <&fan 1 1>; |
| 148 |
trip = <&main2_alert0>; |
| 149 |
}; |
| 150 |
|
| 151 |
map1 { |
| 152 |
cooling-device = <&fan 2 2>; |
| 153 |
trip = <&main2_alert1>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
&main3_thermal { |
| 159 |
cooling-maps { |
| 160 |
map0 { |
| 161 |
cooling-device = <&fan 1 1>; |
| 162 |
trip = <&main3_alert0>; |
| 163 |
}; |
| 164 |
|
| 165 |
map1 { |
| 166 |
cooling-device = <&fan 2 2>; |
| 167 |
trip = <&main3_alert1>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
&main4_thermal { |
| 173 |
cooling-maps { |
| 174 |
map0 { |
| 175 |
cooling-device = <&fan 1 1>; |
| 176 |
trip = <&main4_alert0>; |
| 177 |
}; |
| 178 |
|
| 179 |
map1 { |
| 180 |
cooling-device = <&fan 2 2>; |
| 181 |
trip = <&main4_alert1>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
/* Aquila ETH_2 */ |
| 187 |
&main_cpsw0 { |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
|
| 191 |
/* Aquila ETH_2 SGMII PHY */ |
| 192 |
&main_cpsw0_port8 { |
| 193 |
phy-handle = <&cpsw0_port8_phy4>; |
| 194 |
status = "okay"; |
| 195 |
}; |
| 196 |
|
| 197 |
/* Aquila ETH_2_XGMII_MDIO */ |
| 198 |
&main_cpsw0_mdio { |
| 199 |
status = "okay"; |
| 200 |
|
| 201 |
cpsw0_port8_phy4: ethernet-phy@4 { |
| 202 |
reg = <4>; |
| 203 |
pinctrl-names = "default"; |
| 204 |
pinctrl-0 = <&pinctrl_eth2_int>; |
| 205 |
interrupt-parent = <&main_gpio0>; |
| 206 |
interrupts = <44 IRQ_TYPE_EDGE_FALLING>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
/* Aquila PWM_1 */ |
| 211 |
&main_ehrpwm0 { |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
/* Aquila PWM_4_DP */ |
| 216 |
&main_ehrpwm2 { |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
/* Aquila PWM_2 */ |
| 221 |
&main_ehrpwm1 { |
| 222 |
status = "okay"; |
| 223 |
}; |
| 224 |
|
| 225 |
/* Aquila PWM_3_DSI */ |
| 226 |
&main_ehrpwm5 { |
| 227 |
status = "okay"; |
| 228 |
}; |
| 229 |
|
| 230 |
&main_gpio0 { |
| 231 |
pinctrl-names = "default"; |
| 232 |
pinctrl-0 = <&pinctrl_gpio_01>, /* Aquila GPIO_01 */ |
| 233 |
<&pinctrl_gpio_02>, /* Aquila GPIO_02 */ |
| 234 |
<&pinctrl_gpio_03>; /* Aquila GPIO_03 */ |
| 235 |
}; |
| 236 |
|
| 237 |
/* Aquila I2C_3_DSI1 */ |
| 238 |
&main_i2c0 { |
| 239 |
status = "okay"; |
| 240 |
|
| 241 |
i2c-mux@70 { |
| 242 |
compatible = "nxp,pca9543"; |
| 243 |
reg = <0x70>; |
| 244 |
#address-cells = <1>; |
| 245 |
#size-cells = <0>; |
| 246 |
|
| 247 |
/* I2C on DSI Connector Pin #4 and #6 */ |
| 248 |
i2c_dsi_0: i2c@0 { |
| 249 |
reg = <0>; |
| 250 |
#address-cells = <1>; |
| 251 |
#size-cells = <0>; |
| 252 |
}; |
| 253 |
|
| 254 |
/* I2C on DSI Connector Pin #52 and #54 */ |
| 255 |
i2c_dsi_1: i2c@1 { |
| 256 |
reg = <1>; |
| 257 |
#address-cells = <1>; |
| 258 |
#size-cells = <0>; |
| 259 |
}; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
/* Aquila I2C_4_CSI1 */ |
| 264 |
&main_i2c1 { |
| 265 |
status = "okay"; |
| 266 |
}; |
| 267 |
|
| 268 |
/* Aquila I2C_5_CSI2 */ |
| 269 |
&main_i2c2 { |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
/* Aquila I2C_6 */ |
| 274 |
&main_i2c5 { |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
/* Aquila CAN_1 */ |
| 279 |
&main_mcan10 { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
/* Aquila CAN_3 */ |
| 284 |
&main_mcan13 { |
| 285 |
status = "okay"; |
| 286 |
}; |
| 287 |
|
| 288 |
/* Aquila SD_1 */ |
| 289 |
&main_sdhci1 { |
| 290 |
status = "okay"; |
| 291 |
}; |
| 292 |
|
| 293 |
/* Aquila SPI_2 */ |
| 294 |
&main_spi0 { |
| 295 |
status = "okay"; |
| 296 |
}; |
| 297 |
|
| 298 |
/* Aquila SPI_1 */ |
| 299 |
&main_spi2 { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
/* Aquila UART_1 */ |
| 304 |
&main_uart4 { |
| 305 |
status = "okay"; |
| 306 |
}; |
| 307 |
|
| 308 |
/* Aquila UART_3, used as the Linux console */ |
| 309 |
&main_uart8 { |
| 310 |
status = "okay"; |
| 311 |
}; |
| 312 |
|
| 313 |
/* Aquila I2S_1 */ |
| 314 |
&mcasp4 { |
| 315 |
status = "okay"; |
| 316 |
}; |
| 317 |
|
| 318 |
&mcu_cpsw { |
| 319 |
status = "okay"; |
| 320 |
}; |
| 321 |
|
| 322 |
/* On-module ETH_1 RGMII */ |
| 323 |
&mcu_cpsw_port1 { |
| 324 |
status = "okay"; |
| 325 |
}; |
| 326 |
|
| 327 |
/* Aquila I2C_1 */ |
| 328 |
&mcu_i2c0 { |
| 329 |
clock-frequency = <100000>; |
| 330 |
status = "okay"; |
| 331 |
|
| 332 |
fan_controller: fan@18 { |
| 333 |
compatible = "ti,amc6821"; |
| 334 |
reg = <0x18>; |
| 335 |
#pwm-cells = <2>; |
| 336 |
|
| 337 |
fan: fan { |
| 338 |
cooling-levels = <102 179 255>; |
| 339 |
#cooling-cells = <2>; |
| 340 |
pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; |
| 341 |
}; |
| 342 |
}; |
| 343 |
|
| 344 |
wm8904_1a: audio-codec@1a { |
| 345 |
compatible = "wlf,wm8904"; |
| 346 |
reg = <0x1a>; |
| 347 |
pinctrl-names = "default"; |
| 348 |
pinctrl-0 = <&pinctrl_audio_extrefclk1>; |
| 349 |
#sound-dai-cells = <0>; |
| 350 |
clocks = <&audio_refclk1>; |
| 351 |
clock-names = "mclk"; |
| 352 |
AVDD-supply = <®_1v8_sw>; |
| 353 |
CPVDD-supply = <®_1v8_sw>; |
| 354 |
DBVDD-supply = <®_1v8_sw>; |
| 355 |
DCVDD-supply = <®_1v8_sw>; |
| 356 |
MICVDD-supply = <®_1v8_sw>; |
| 357 |
|
| 358 |
wlf,drc-cfg-names = "default", "peaklimiter"; |
| 359 |
/* |
| 360 |
* Config registers per name, respectively: |
| 361 |
* KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 |
| 362 |
* KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 |
| 363 |
*/ |
| 364 |
wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, |
| 365 |
/bits/ 16 <0x04af 0x324b 0x0010 0x0408>; |
| 366 |
|
| 367 |
/* GPIO1 = DMIC_CLK, don't touch others */ |
| 368 |
wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; |
| 369 |
|
| 370 |
wlf,in1r-as-dmicdat2; |
| 371 |
}; |
| 372 |
|
| 373 |
/* Current measurement into module VCC */ |
| 374 |
hwmon@41 { |
| 375 |
compatible = "ti,ina226"; |
| 376 |
reg = <0x41>; |
| 377 |
shunt-resistor = <5000>; |
| 378 |
}; |
| 379 |
|
| 380 |
temperature-sensor@4f { |
| 381 |
compatible = "ti,tmp1075"; |
| 382 |
reg = <0x4f>; |
| 383 |
}; |
| 384 |
|
| 385 |
/* USB-C OTG (TCPC USB PD PHY) */ |
| 386 |
tcpc@52 { |
| 387 |
compatible = "nxp,ptn5110", "tcpci"; |
| 388 |
reg = <0x52>; |
| 389 |
pinctrl-names = "default"; |
| 390 |
pinctrl-0 = <&pinctrl_usb1_int>; |
| 391 |
interrupt-parent = <&main_gpio0>; |
| 392 |
interrupts = <28 IRQ_TYPE_EDGE_FALLING>; |
| 393 |
|
| 394 |
connector { |
| 395 |
compatible = "usb-c-connector"; |
| 396 |
data-role = "dual"; |
| 397 |
label = "USB-C OTG"; |
| 398 |
power-role = "dual"; |
| 399 |
try-power-role = "sink"; |
| 400 |
self-powered; |
| 401 |
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| 402 |
sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>; |
| 403 |
op-sink-microwatt = <0>; |
| 404 |
|
| 405 |
ports { |
| 406 |
#address-cells = <1>; |
| 407 |
#size-cells = <0>; |
| 408 |
|
| 409 |
port@0 { |
| 410 |
reg = <0>; |
| 411 |
|
| 412 |
usb_1_con_hs: endpoint { |
| 413 |
remote-endpoint = <&usb0_hs>; |
| 414 |
}; |
| 415 |
}; |
| 416 |
|
| 417 |
port@1 { |
| 418 |
reg = <1>; |
| 419 |
|
| 420 |
usb_1_con_ss: endpoint { |
| 421 |
remote-endpoint = <&usb0_ss_mux>; |
| 422 |
}; |
| 423 |
}; |
| 424 |
}; |
| 425 |
}; |
| 426 |
}; |
| 427 |
|
| 428 |
carrier_eeprom: eeprom@57 { |
| 429 |
compatible = "st,24c02", "atmel,24c02"; |
| 430 |
reg = <0x57>; |
| 431 |
pagesize = <16>; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
/* Aquila I2C_2 */ |
| 436 |
&mcu_i2c1 { |
| 437 |
status = "okay"; |
| 438 |
}; |
| 439 |
|
| 440 |
/* Aquila CAN_2 */ |
| 441 |
&mcu_mcan0 { |
| 442 |
status = "okay"; |
| 443 |
}; |
| 444 |
|
| 445 |
/* Aquila CAN_4 */ |
| 446 |
&mcu_mcan1 { |
| 447 |
status = "okay"; |
| 448 |
}; |
| 449 |
|
| 450 |
/* Aquila UART_4 */ |
| 451 |
&mcu_uart0 { |
| 452 |
status = "okay"; |
| 453 |
}; |
| 454 |
|
| 455 |
&mhdp { |
| 456 |
status = "okay"; |
| 457 |
}; |
| 458 |
|
| 459 |
/* Aquila QSPI_1 */ |
| 460 |
&ospi0 { |
| 461 |
pinctrl-names = "default"; |
| 462 |
pinctrl-0 = <&pinctrl_mcu_ospi0_4bit>, <&pinctrl_mcu_ospi0_cs0>; |
| 463 |
status = "okay"; |
| 464 |
|
| 465 |
flash@0 { |
| 466 |
compatible = "jedec,spi-nor"; |
| 467 |
reg = <0x0>; |
| 468 |
spi-max-frequency = <66000000>; |
| 469 |
spi-rx-bus-width = <4>; |
| 470 |
spi-tx-bus-width = <4>; |
| 471 |
cdns,read-delay = <0>; |
| 472 |
cdns,tchsh-ns = <3>; |
| 473 |
cdns,tsd2d-ns = <10>; |
| 474 |
cdns,tshsl-ns = <30>; |
| 475 |
cdns,tslch-ns = <8>; |
| 476 |
}; |
| 477 |
}; |
| 478 |
|
| 479 |
/* Aquila PCIE_1 */ |
| 480 |
&pcie0_rc { |
| 481 |
status = "okay"; |
| 482 |
}; |
| 483 |
|
| 484 |
/* Aquila PCIE_2 */ |
| 485 |
&pcie1_rc { |
| 486 |
status = "okay"; |
| 487 |
}; |
| 488 |
|
| 489 |
&serdes2 { |
| 490 |
status = "okay"; |
| 491 |
}; |
| 492 |
|
| 493 |
&serdes4 { |
| 494 |
status = "okay"; |
| 495 |
}; |
| 496 |
|
| 497 |
&serdes_wiz2 { |
| 498 |
status = "okay"; |
| 499 |
}; |
| 500 |
|
| 501 |
&serdes_wiz4 { |
| 502 |
status = "okay"; |
| 503 |
}; |
| 504 |
|
| 505 |
/* Aquila ADC_[1-4] */ |
| 506 |
&tscadc0 { |
| 507 |
status = "okay"; |
| 508 |
}; |
| 509 |
|
| 510 |
&usbss0 { |
| 511 |
status = "okay"; |
| 512 |
}; |
| 513 |
|
| 514 |
&usb0ss_mux { |
| 515 |
status = "okay"; |
| 516 |
|
| 517 |
port { |
| 518 |
usb0_ss_mux: endpoint { |
| 519 |
remote-endpoint = <&usb_1_con_ss>; |
| 520 |
}; |
| 521 |
}; |
| 522 |
}; |
| 523 |
|
| 524 |
&usb0 { |
| 525 |
status = "okay"; |
| 526 |
|
| 527 |
port { |
| 528 |
usb0_hs: endpoint { |
| 529 |
remote-endpoint = <&usb_1_con_hs>; |
| 530 |
}; |
| 531 |
}; |
| 532 |
}; |
| 533 |
|
| 534 |
&wkup0_thermal { |
| 535 |
cooling-maps { |
| 536 |
map0 { |
| 537 |
cooling-device = <&fan 1 1>; |
| 538 |
trip = <&wkup0_alert0>; |
| 539 |
}; |
| 540 |
|
| 541 |
map1 { |
| 542 |
cooling-device = <&fan 2 2>; |
| 543 |
trip = <&wkup0_alert1>; |
| 544 |
}; |
| 545 |
}; |
| 546 |
}; |
| 547 |
|
| 548 |
&wkup1_thermal { |
| 549 |
cooling-maps { |
| 550 |
map0 { |
| 551 |
cooling-device = <&fan 1 1>; |
| 552 |
trip = <&wkup1_alert0>; |
| 553 |
}; |
| 554 |
|
| 555 |
map1 { |
| 556 |
cooling-device = <&fan 2 2>; |
| 557 |
trip = <&wkup1_alert1>; |
| 558 |
}; |
| 559 |
}; |
| 560 |
}; |
| 561 |
|
| 562 |
&wkup_gpio0 { |
| 563 |
pinctrl-names = "default"; |
| 564 |
pinctrl-0 = <&pinctrl_gpio_04>, /* Aquila GPIO_04 */ |
| 565 |
<&pinctrl_gpio_05>, /* Aquila GPIO_05 */ |
| 566 |
<&pinctrl_gpio_06>, /* Aquila GPIO_06 */ |
| 567 |
<&pinctrl_gpio_07>, /* Aquila GPIO_07 */ |
| 568 |
<&pinctrl_gpio_08>; /* Aquila GPIO_08 */ |
| 569 |
}; |
| 570 |
|
| 571 |
/* Aquila UART_2, through RS485 transceiver */ |
| 572 |
&wkup_uart0 { |
| 573 |
linux,rs485-enabled-at-boot-time; |
| 574 |
rs485-rx-during-tx; |
| 575 |
status = "okay"; |
| 576 |
}; |