| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Kontron SMARC-sa67 board on the Kontron Eval Carrier 2.2. |
| 4 |
* |
| 5 |
* Copyright (c) 2025 Kontron Europe GmbH |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
/plugin/; |
| 10 |
|
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include "k3-pinctrl.h" |
| 13 |
|
| 14 |
&{/} { |
| 15 |
pwm-fan { |
| 16 |
compatible = "pwm-fan"; |
| 17 |
pinctrl-names = "default"; |
| 18 |
pinctrl-0 = <&pwm_fan_pins_default>; |
| 19 |
interrupts-extended = <&main_gpio1 7 IRQ_TYPE_EDGE_FALLING>; |
| 20 |
#cooling-cells = <2>; |
| 21 |
pwms = <&epwm2 1 4000000 0>; |
| 22 |
cooling-levels = <1 128 192 255>; |
| 23 |
}; |
| 24 |
|
| 25 |
sound { |
| 26 |
compatible = "simple-audio-card"; |
| 27 |
simple-audio-card,widgets = |
| 28 |
"Headphone", "Headphone Jack", |
| 29 |
"Line", "Line Out Jack", |
| 30 |
"Microphone", "Microphone Jack", |
| 31 |
"Line", "Line In Jack"; |
| 32 |
simple-audio-card,routing = |
| 33 |
"Line Out Jack", "LINEOUTR", |
| 34 |
"Line Out Jack", "LINEOUTL", |
| 35 |
"Headphone Jack", "HPOUTR", |
| 36 |
"Headphone Jack", "HPOUTL", |
| 37 |
"IN1L", "Line In Jack", |
| 38 |
"IN1R", "Line In Jack", |
| 39 |
"Microphone Jack", "MICBIAS", |
| 40 |
"IN2L", "Microphone Jack", |
| 41 |
"IN2R", "Microphone Jack"; |
| 42 |
simple-audio-card,mclk-fs = <256>; |
| 43 |
simple-audio-card,format = "i2s"; |
| 44 |
simple-audio-card,bitclock-master = <&dailink0_master>; |
| 45 |
simple-audio-card,frame-master = <&dailink0_master>; |
| 46 |
|
| 47 |
simple-audio-card,cpu { |
| 48 |
sound-dai = <&mcasp0>; |
| 49 |
}; |
| 50 |
|
| 51 |
dailink0_master: simple-audio-card,codec { |
| 52 |
sound-dai = <&wm8904>; |
| 53 |
clocks = <&audio_refclk0>; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
cvcc_1p8v_i2s: regulator-carrier-0 { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "V_1V8_S0_I2S"; |
| 60 |
regulator-min-microvolt = <1800000>; |
| 61 |
regulator-max-microvolt = <1800000>; |
| 62 |
}; |
| 63 |
|
| 64 |
cvcc_1p8v_s0: regulator-carrier-1 { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "V_1V8_S0"; |
| 67 |
regulator-min-microvolt = <1800000>; |
| 68 |
regulator-max-microvolt = <1800000>; |
| 69 |
}; |
| 70 |
|
| 71 |
cvcc_3p3v_s0: regulator-carrier-2 { |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-name = "V_3V3_S0"; |
| 74 |
regulator-min-microvolt = <3300000>; |
| 75 |
regulator-max-microvolt = <3300000>; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
&audio_refclk0 { |
| 80 |
status = "okay"; |
| 81 |
}; |
| 82 |
|
| 83 |
&epwm2 { |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
&main_pmx0 { |
| 88 |
pwm_fan_pins_default: pwm-fan-default-pins { |
| 89 |
pinctrl-single,pins = < |
| 90 |
J722S_IOPAD(0x1ec, PIN_OUTPUT, 8) /* (A22) I2C1_SDA.EHRPWM2_B */ |
| 91 |
J722S_IOPAD(0x194, PIN_INPUT, 0) /* (A25) MCASP0_AXR3.GPIO1_7 */ |
| 92 |
>; |
| 93 |
}; |
| 94 |
}; |
| 95 |
|
| 96 |
&mcasp0 { |
| 97 |
#sound-dai-cells = <0>; |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
&mcu_i2c0 { |
| 102 |
status = "okay"; |
| 103 |
#address-cells = <1>; |
| 104 |
#size-cells = <0>; |
| 105 |
|
| 106 |
wm8904: audio-codec@1a { |
| 107 |
#sound-dai-cells = <0>; |
| 108 |
compatible = "wlf,wm8904"; |
| 109 |
reg = <0x1a>; |
| 110 |
clocks = <&audio_refclk0>; |
| 111 |
clock-names = "mclk"; |
| 112 |
AVDD-supply = <&cvcc_1p8v_i2s>; |
| 113 |
CPVDD-supply = <&cvcc_1p8v_i2s>; |
| 114 |
DBVDD-supply = <&cvcc_1p8v_i2s>; |
| 115 |
DCVDD-supply = <&cvcc_1p8v_i2s>; |
| 116 |
MICVDD-supply = <&cvcc_1p8v_i2s>; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
&mcu_spi0 { |
| 121 |
status = "okay"; |
| 122 |
#address-cells = <1>; |
| 123 |
#size-cells = <0>; |
| 124 |
|
| 125 |
flash@0 { |
| 126 |
compatible = "jedec,spi-nor"; |
| 127 |
reg = <0>; |
| 128 |
spi-max-frequency = <104000000>; |
| 129 |
m25p,fast-read; |
| 130 |
vcc-supply = <&cvcc_1p8v_s0>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
&wkup_i2c0 { |
| 135 |
status = "okay"; |
| 136 |
#address-cells = <1>; |
| 137 |
#size-cells = <0>; |
| 138 |
|
| 139 |
/* SMARC Carrier EEPROM */ |
| 140 |
eeprom@57 { |
| 141 |
compatible = "atmel,24c32"; |
| 142 |
reg = <0x57>; |
| 143 |
pagesize = <32>; |
| 144 |
vcc-supply = <&cvcc_3p3v_s0>; |
| 145 |
}; |
| 146 |
}; |