| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* https://beagley-ai.org/ |
| 4 |
* |
| 5 |
* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
* Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/net/ti-dp83867.h> |
| 13 |
#include "k3-j722s.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
compatible = "beagle,am67a-beagley-ai", "ti,j722s"; |
| 17 |
model = "BeagleBoard.org BeagleY-AI"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &wkup_uart0; |
| 21 |
serial2 = &main_uart0; |
| 22 |
mmc1 = &sdhci1; |
| 23 |
rtc0 = &rtc; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = &main_uart0; |
| 28 |
}; |
| 29 |
|
| 30 |
memory@80000000 { |
| 31 |
/* 4G RAM */ |
| 32 |
reg = <0x00000000 0x80000000 0x00000000 0x80000000>, |
| 33 |
<0x00000008 0x80000000 0x00000000 0x80000000>; |
| 34 |
device_type = "memory"; |
| 35 |
bootph-pre-ram; |
| 36 |
}; |
| 37 |
|
| 38 |
reserved_memory: reserved-memory { |
| 39 |
#address-cells = <2>; |
| 40 |
#size-cells = <2>; |
| 41 |
ranges; |
| 42 |
|
| 43 |
secure_tfa_ddr: tfa@9e780000 { |
| 44 |
reg = <0x00 0x9e780000 0x00 0x80000>; |
| 45 |
no-map; |
| 46 |
}; |
| 47 |
|
| 48 |
secure_ddr: optee@9e800000 { |
| 49 |
reg = <0x00 0x9e800000 0x00 0x01800000>; |
| 50 |
no-map; |
| 51 |
}; |
| 52 |
|
| 53 |
wkup_r5fss0_core0_dma_memory_region: memory@a0000000 { |
| 54 |
compatible = "shared-dma-pool"; |
| 55 |
reg = <0x00 0xa0000000 0x00 0x100000>; |
| 56 |
no-map; |
| 57 |
}; |
| 58 |
|
| 59 |
wkup_r5fss0_core0_memory_region: memory@a0100000 { |
| 60 |
compatible = "shared-dma-pool"; |
| 61 |
reg = <0x00 0xa0100000 0x00 0xf00000>; |
| 62 |
no-map; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
vsys_5v0: regulator-1 { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
regulator-name = "vsys_5v0"; |
| 69 |
regulator-min-microvolt = <5000000>; |
| 70 |
regulator-max-microvolt = <5000000>; |
| 71 |
regulator-always-on; |
| 72 |
regulator-boot-on; |
| 73 |
bootph-all; |
| 74 |
}; |
| 75 |
|
| 76 |
vdd_3v3: regulator-2 { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "vdd_3v3"; |
| 79 |
regulator-min-microvolt = <3300000>; |
| 80 |
regulator-max-microvolt = <3300000>; |
| 81 |
vin-supply = <&vsys_5v0>; |
| 82 |
regulator-always-on; |
| 83 |
regulator-boot-on; |
| 84 |
}; |
| 85 |
|
| 86 |
vdd_mmc1: regulator-3 { |
| 87 |
compatible = "regulator-fixed"; |
| 88 |
regulator-name = "vdd_mmc1"; |
| 89 |
pinctrl-names = "default"; |
| 90 |
pinctrl-0 = <&vdd_3v3_sd_pins_default>; |
| 91 |
regulator-min-microvolt = <3300000>; |
| 92 |
regulator-max-microvolt = <3300000>; |
| 93 |
regulator-boot-on; |
| 94 |
enable-active-high; |
| 95 |
gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; |
| 96 |
bootph-all; |
| 97 |
}; |
| 98 |
|
| 99 |
vdd_sd_dv: regulator-4 { |
| 100 |
compatible = "regulator-gpio"; |
| 101 |
regulator-name = "tlv71033"; |
| 102 |
pinctrl-names = "default"; |
| 103 |
pinctrl-0 = <&vdd_sd_dv_pins_default>; |
| 104 |
regulator-min-microvolt = <1800000>; |
| 105 |
regulator-max-microvolt = <3300000>; |
| 106 |
regulator-boot-on; |
| 107 |
vin-supply = <&vsys_5v0>; |
| 108 |
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; |
| 109 |
states = <1800000 0x0>, |
| 110 |
<3300000 0x1>; |
| 111 |
bootph-all; |
| 112 |
}; |
| 113 |
|
| 114 |
vsys_io_1v8: regulator-5 { |
| 115 |
compatible = "regulator-fixed"; |
| 116 |
regulator-name = "vsys_io_1v8"; |
| 117 |
regulator-min-microvolt = <1800000>; |
| 118 |
regulator-max-microvolt = <1800000>; |
| 119 |
regulator-always-on; |
| 120 |
regulator-boot-on; |
| 121 |
}; |
| 122 |
|
| 123 |
vsys_io_1v2: regulator-6 { |
| 124 |
compatible = "regulator-fixed"; |
| 125 |
regulator-name = "vsys_io_1v2"; |
| 126 |
regulator-min-microvolt = <1200000>; |
| 127 |
regulator-max-microvolt = <1200000>; |
| 128 |
regulator-always-on; |
| 129 |
regulator-boot-on; |
| 130 |
}; |
| 131 |
|
| 132 |
leds { |
| 133 |
compatible = "gpio-leds"; |
| 134 |
pinctrl-names = "default"; |
| 135 |
pinctrl-0 = <&led_pins_default>; |
| 136 |
|
| 137 |
led-0 { |
| 138 |
gpios = <&main_gpio0 11 GPIO_ACTIVE_LOW>; |
| 139 |
default-state = "off"; |
| 140 |
}; |
| 141 |
|
| 142 |
led-1 { |
| 143 |
gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; |
| 144 |
linux,default-trigger = "heartbeat"; |
| 145 |
function = LED_FUNCTION_HEARTBEAT; |
| 146 |
default-state = "on"; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&main_pmx0 { |
| 152 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 153 |
pinctrl-single,pins = < |
| 154 |
J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ |
| 155 |
J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ |
| 156 |
>; |
| 157 |
bootph-all; |
| 158 |
}; |
| 159 |
|
| 160 |
main_uart0_pins_default: main-uart0-default-pins { |
| 161 |
pinctrl-single,pins = < |
| 162 |
J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ |
| 163 |
J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ |
| 164 |
>; |
| 165 |
bootph-all; |
| 166 |
}; |
| 167 |
|
| 168 |
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { |
| 169 |
pinctrl-single,pins = < |
| 170 |
J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ |
| 171 |
>; |
| 172 |
bootph-all; |
| 173 |
}; |
| 174 |
|
| 175 |
main_mmc1_pins_default: main-mmc1-default-pins { |
| 176 |
pinctrl-single,pins = < |
| 177 |
J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ |
| 178 |
J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ |
| 179 |
J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ |
| 180 |
J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ |
| 181 |
J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ |
| 182 |
J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ |
| 183 |
J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD.GPIO1_48 */ |
| 184 |
>; |
| 185 |
bootph-all; |
| 186 |
}; |
| 187 |
|
| 188 |
mdio_pins_default: mdio-default-pins { |
| 189 |
pinctrl-single,pins = < |
| 190 |
J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ |
| 191 |
J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ |
| 192 |
>; |
| 193 |
}; |
| 194 |
|
| 195 |
rgmii1_pins_default: rgmii1-default-pins { |
| 196 |
pinctrl-single,pins = < |
| 197 |
J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ |
| 198 |
J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ |
| 199 |
J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ |
| 200 |
J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ |
| 201 |
J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ |
| 202 |
J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ |
| 203 |
J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ |
| 204 |
J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ |
| 205 |
J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ |
| 206 |
J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ |
| 207 |
J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ |
| 208 |
J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ |
| 209 |
>; |
| 210 |
}; |
| 211 |
|
| 212 |
led_pins_default: led-default-pins { |
| 213 |
pinctrl-single,pins = < |
| 214 |
J722S_IOPAD(0x002c, PIN_OUTPUT, 7) /* (K26) OSPI0_CSn0.GPIO0_11 */ |
| 215 |
J722S_IOPAD(0x0030, PIN_OUTPUT, 7) /* (K23) OSPI0_CSn1.GPIO0_12 */ |
| 216 |
>; |
| 217 |
}; |
| 218 |
|
| 219 |
pmic_irq_pins_default: pmic-irq-default-pins { |
| 220 |
pinctrl-single,pins = < |
| 221 |
J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ |
| 222 |
>; |
| 223 |
}; |
| 224 |
|
| 225 |
vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { |
| 226 |
pinctrl-single,pins = < |
| 227 |
J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ |
| 228 |
>; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
&cpsw3g { |
| 233 |
pinctrl-names = "default"; |
| 234 |
pinctrl-0 = <&rgmii1_pins_default>; |
| 235 |
status = "okay"; |
| 236 |
}; |
| 237 |
|
| 238 |
&cpsw3g_mdio { |
| 239 |
pinctrl-names = "default"; |
| 240 |
pinctrl-0 = <&mdio_pins_default>; |
| 241 |
status = "okay"; |
| 242 |
|
| 243 |
cpsw3g_phy0: ethernet-phy@0 { |
| 244 |
reg = <0>; |
| 245 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 246 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 247 |
ti,min-output-impedance; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
&cpsw_port1 { |
| 252 |
phy-mode = "rgmii-id"; |
| 253 |
phy-handle = <&cpsw3g_phy0>; |
| 254 |
status = "okay"; |
| 255 |
}; |
| 256 |
|
| 257 |
&main_gpio1 { |
| 258 |
bootph-all; |
| 259 |
status = "okay"; |
| 260 |
}; |
| 261 |
|
| 262 |
&main_uart0 { |
| 263 |
pinctrl-names = "default"; |
| 264 |
pinctrl-0 = <&main_uart0_pins_default>; |
| 265 |
bootph-all; |
| 266 |
status = "okay"; |
| 267 |
}; |
| 268 |
|
| 269 |
&mcu_pmx0 { |
| 270 |
wkup_uart0_pins_default: wkup-uart0-default-pins { |
| 271 |
pinctrl-single,pins = < |
| 272 |
J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ |
| 273 |
J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ |
| 274 |
J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ |
| 275 |
J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ |
| 276 |
>; |
| 277 |
bootph-all; |
| 278 |
}; |
| 279 |
|
| 280 |
wkup_i2c0_pins_default: wkup-i2c0-default-pins { |
| 281 |
pinctrl-single,pins = < |
| 282 |
J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ |
| 283 |
J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ |
| 284 |
>; |
| 285 |
bootph-all; |
| 286 |
}; |
| 287 |
}; |
| 288 |
|
| 289 |
&wkup_uart0 { |
| 290 |
/* WKUP UART0 is used by Device Manager firmware */ |
| 291 |
pinctrl-names = "default"; |
| 292 |
pinctrl-0 = <&wkup_uart0_pins_default>; |
| 293 |
bootph-all; |
| 294 |
status = "reserved"; |
| 295 |
}; |
| 296 |
|
| 297 |
&wkup_i2c0 { |
| 298 |
pinctrl-names = "default"; |
| 299 |
pinctrl-0 = <&wkup_i2c0_pins_default>; |
| 300 |
clock-frequency = <100000>; |
| 301 |
bootph-all; |
| 302 |
status = "okay"; |
| 303 |
|
| 304 |
tps65219: pmic@30 { |
| 305 |
compatible = "ti,tps65219"; |
| 306 |
reg = <0x30>; |
| 307 |
buck1-supply = <&vsys_5v0>; |
| 308 |
buck2-supply = <&vsys_5v0>; |
| 309 |
buck3-supply = <&vsys_5v0>; |
| 310 |
ldo1-supply = <&vdd_3v3>; |
| 311 |
ldo3-supply = <&vdd_3v3>; |
| 312 |
ldo4-supply = <&vdd_3v3>; |
| 313 |
|
| 314 |
pinctrl-names = "default"; |
| 315 |
pinctrl-0 = <&pmic_irq_pins_default>; |
| 316 |
interrupt-parent = <&gic500>; |
| 317 |
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; |
| 318 |
interrupt-controller; |
| 319 |
#interrupt-cells = <1>; |
| 320 |
|
| 321 |
bootph-all; |
| 322 |
system-power-controller; |
| 323 |
ti,power-button; |
| 324 |
|
| 325 |
regulators { |
| 326 |
buck1_reg: buck1 { |
| 327 |
regulator-name = "VDD_3V3"; |
| 328 |
regulator-min-microvolt = <3300000>; |
| 329 |
regulator-max-microvolt = <3300000>; |
| 330 |
regulator-boot-on; |
| 331 |
regulator-always-on; |
| 332 |
}; |
| 333 |
|
| 334 |
buck2_reg: buck2 { |
| 335 |
regulator-name = "VDD_1V8"; |
| 336 |
regulator-min-microvolt = <1800000>; |
| 337 |
regulator-max-microvolt = <1800000>; |
| 338 |
regulator-boot-on; |
| 339 |
regulator-always-on; |
| 340 |
}; |
| 341 |
|
| 342 |
ldo1_reg: ldo1 { |
| 343 |
regulator-name = "VDDSHV5_SDIO"; |
| 344 |
regulator-min-microvolt = <3300000>; |
| 345 |
regulator-max-microvolt = <3300000>; |
| 346 |
regulator-allow-bypass; |
| 347 |
regulator-boot-on; |
| 348 |
regulator-always-on; |
| 349 |
}; |
| 350 |
|
| 351 |
ldo2_reg: ldo2 { |
| 352 |
regulator-name = "VDD_1V2"; |
| 353 |
regulator-min-microvolt = <1200000>; |
| 354 |
regulator-max-microvolt = <1200000>; |
| 355 |
regulator-boot-on; |
| 356 |
regulator-always-on; |
| 357 |
}; |
| 358 |
|
| 359 |
ldo3_reg: ldo3 { |
| 360 |
regulator-name = "VDDA_PHY_1V8"; |
| 361 |
regulator-min-microvolt = <1800000>; |
| 362 |
regulator-max-microvolt = <1800000>; |
| 363 |
regulator-boot-on; |
| 364 |
regulator-always-on; |
| 365 |
}; |
| 366 |
|
| 367 |
ldo4_reg: ldo4 { |
| 368 |
regulator-name = "VDDA_PLL_1V8"; |
| 369 |
regulator-min-microvolt = <1800000>; |
| 370 |
regulator-max-microvolt = <1800000>; |
| 371 |
regulator-boot-on; |
| 372 |
regulator-always-on; |
| 373 |
}; |
| 374 |
}; |
| 375 |
}; |
| 376 |
|
| 377 |
eeprom@50 { |
| 378 |
compatible = "atmel,24c32"; |
| 379 |
reg = <0x50>; |
| 380 |
}; |
| 381 |
|
| 382 |
rtc: rtc@68 { |
| 383 |
compatible = "dallas,ds1340"; |
| 384 |
reg = <0x68>; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
&sdhci1 { |
| 389 |
/* SD/MMC */ |
| 390 |
vmmc-supply = <&vdd_mmc1>; |
| 391 |
vqmmc-supply = <&vdd_sd_dv>; |
| 392 |
pinctrl-names = "default"; |
| 393 |
pinctrl-0 = <&main_mmc1_pins_default>; |
| 394 |
disable-wp; |
| 395 |
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; |
| 396 |
cd-debounce-delay-ms = <100>; |
| 397 |
bootph-all; |
| 398 |
ti,fails-without-test-cd; |
| 399 |
status = "okay"; |
| 400 |
}; |
| 401 |
|
| 402 |
#include "k3-j722s-ti-ipc-firmware.dtsi" |