Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am654-base-board.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6 /dts-v1/;
7
8 #include "k3-am654.dtsi"
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/net/ti-dp83867.h>
11
12 / {
13 compatible = "ti,am654-evm", "ti,am654";
14 model = "Texas Instruments AM654 Base Board";
15
16 aliases {
17 serial0 = &wkup_uart0;
18 serial1 = &mcu_uart0;
19 serial2 = &main_uart0;
20 i2c0 = &wkup_i2c0;
21 i2c1 = &mcu_i2c0;
22 i2c2 = &main_i2c0;
23 i2c3 = &main_i2c1;
24 i2c4 = &main_i2c2;
25 ethernet0 = &cpsw_port1;
26 mmc0 = &sdhci0;
27 mmc1 = &sdhci1;
28 };
29
30 chosen {
31 stdout-path = "serial2:115200n8";
32 };
33
34 memory@80000000 {
35 device_type = "memory";
36 bootph-all;
37 /* 4G RAM */
38 reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
39 <0x00000008 0x80000000 0x00000000 0x80000000>;
40 };
41
42 reserved_memory: reserved-memory {
43 #address-cells = <2>;
44 #size-cells = <2>;
45 ranges;
46
47 secure_ddr: secure-ddr@9e800000 {
48 reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
49 alignment = <0x1000>;
50 no-map;
51 };
52
53 mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
54 compatible = "shared-dma-pool";
55 reg = <0 0xa0000000 0 0x100000>;
56 no-map;
57 };
58
59 mcu_r5fss0_core0_memory_region: memory@a0100000 {
60 compatible = "shared-dma-pool";
61 reg = <0 0xa0100000 0 0xf00000>;
62 no-map;
63 };
64 };
65
66 gpio-keys {
67 compatible = "gpio-keys";
68 autorepeat;
69 pinctrl-names = "default";
70 pinctrl-0 = <&push_button_pins_default>;
71
72 switch-5 {
73 label = "GPIO Key USER1";
74 linux,code = <BTN_0>;
75 gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
76 };
77
78 switch-6 {
79 label = "GPIO Key USER2";
80 linux,code = <BTN_1>;
81 gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
82 };
83 };
84
85 evm_12v0: regulator-0 {
86 /* main supply */
87 compatible = "regulator-fixed";
88 regulator-name = "evm_12v0";
89 regulator-min-microvolt = <12000000>;
90 regulator-max-microvolt = <12000000>;
91 regulator-always-on;
92 regulator-boot-on;
93 };
94
95 vcc3v3_io: regulator-1 {
96 /* Output of TPS54334 */
97 compatible = "regulator-fixed";
98 regulator-name = "vcc3v3_io";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
101 regulator-always-on;
102 regulator-boot-on;
103 vin-supply = <&evm_12v0>;
104 };
105
106 vdd_mmc1_sd: regulator-2 {
107 compatible = "regulator-fixed";
108 regulator-name = "vdd_mmc1_sd";
109 regulator-min-microvolt = <3300000>;
110 regulator-max-microvolt = <3300000>;
111 regulator-boot-on;
112 enable-active-high;
113 vin-supply = <&vcc3v3_io>;
114 gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
115 };
116
117 vtt_supply: regulator-3 {
118 compatible = "regulator-fixed";
119 regulator-name = "vtt";
120 pinctrl-names = "default";
121 pinctrl-0 = <&ddr_vtt_pins_default>;
122 regulator-min-microvolt = <3300000>;
123 regulator-max-microvolt = <3300000>;
124 enable-active-high;
125 regulator-always-on;
126 regulator-boot-on;
127 vin-supply = <&vcc3v3_io>;
128 gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
129 bootph-all;
130 };
131 };
132
133 &wkup_pmx0 {
134 wkup_uart0_pins_default: wkup-uart0-default-pins {
135 pinctrl-single,pins = <
136 AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */
137 AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */
138 AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
139 AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
140 >;
141 bootph-all;
142 };
143
144 ddr_vtt_pins_default: ddr-vtt-default-pins {
145 pinctrl-single,pins = <
146 AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */
147 >;
148 bootph-all;
149 };
150
151 wkup_i2c0_pins_default: wkup-i2c0-default-pins {
152 pinctrl-single,pins = <
153 AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
154 AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
155 >;
156 bootph-all;
157 };
158
159 push_button_pins_default: push-button-default-pins {
160 pinctrl-single,pins = <
161 AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
162 AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
163 >;
164 };
165
166 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
167 pinctrl-single,pins = <
168 AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
169 AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
170 AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
171 AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
172 AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
173 AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
174 AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
175 AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
176 AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
177 AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
178 AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
179 >;
180 bootph-all;
181 };
182
183 wkup_pca554_default: wkup-pca554-default-pins {
184 pinctrl-single,pins = <
185 AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
186 >;
187 };
188
189 mcu_uart0_pins_default: mcu-uart0-default-pins {
190 pinctrl-single,pins = <
191 AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
192 AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
193 AM65X_WKUP_IOPAD(0x004c, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
194 AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
195 >;
196 bootph-all;
197 };
198
199 mcu_cpsw_pins_default: mcu-cpsw-default-pins {
200 pinctrl-single,pins = <
201 AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
202 AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
203 AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
204 AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
205 AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
206 AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
207 AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
208 AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
209 AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
210 AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
211 AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
212 AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
213 >;
214 };
215
216 mcu_mdio_pins_default: mcu-mdio1-default-pins {
217 pinctrl-single,pins = <
218 AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
219 AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
220 >;
221 };
222
223 mcu_i2c0_pins_default: mcu-i2c0-default-pins {
224 pinctrl-single,pins = <
225 AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */
226 AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */
227 >;
228 };
229 };
230
231 &main_pmx0 {
232 main_uart0_pins_default: main-uart0-default-pins {
233 pinctrl-single,pins = <
234 AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
235 AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
236 AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
237 AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
238 >;
239 bootph-all;
240 };
241
242 main_i2c2_pins_default: main-i2c2-default-pins {
243 pinctrl-single,pins = <
244 AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
245 AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
246 >;
247 };
248
249 main_spi0_pins_default: main-spi0-default-pins {
250 pinctrl-single,pins = <
251 AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
252 AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
253 AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
254 AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
255 >;
256 };
257
258 main_mmc0_pins_default: main-mmc0-default-pins {
259 pinctrl-single,pins = <
260 AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
261 AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
262 AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
263 AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
264 AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
265 AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
266 AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
267 AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
268 AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
269 AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
270 AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
271 AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
272 >;
273 bootph-all;
274 };
275
276 main_mmc1_pins_default: main-mmc1-default-pins {
277 pinctrl-single,pins = <
278 AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
279 AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
280 AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
281 AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
282 AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
283 AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
284 AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
285 AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
286 >;
287 bootph-all;
288 };
289
290 usb1_pins_default: usb1-default-pins {
291 pinctrl-single,pins = <
292 AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
293 >;
294 };
295 };
296
297 &main_pmx1 {
298 main_i2c0_pins_default: main-i2c0-default-pins {
299 pinctrl-single,pins = <
300 AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
301 AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
302 >;
303 };
304
305 main_i2c1_pins_default: main-i2c1-default-pins {
306 pinctrl-single,pins = <
307 AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
308 AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
309 >;
310 };
311
312 ecap0_pins_default: ecap0-default-pins {
313 pinctrl-single,pins = <
314 AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
315 >;
316 };
317 };
318
319 &wkup_uart0 {
320 /* Wakeup UART is used by System firmware */
321 status = "reserved";
322 pinctrl-names = "default";
323 pinctrl-0 = <&wkup_uart0_pins_default>;
324 };
325
326 &mcu_uart0 {
327 status = "okay";
328 pinctrl-names = "default";
329 pinctrl-0 = <&mcu_uart0_pins_default>;
330 };
331
332 &main_uart0 {
333 status = "okay";
334 pinctrl-names = "default";
335 pinctrl-0 = <&main_uart0_pins_default>;
336 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
337 bootph-all;
338 };
339
340 &wkup_i2c0 {
341 status = "okay";
342 pinctrl-names = "default";
343 pinctrl-0 = <&wkup_i2c0_pins_default>;
344 clock-frequency = <400000>;
345
346 eeprom@50 {
347 /* AT24CM01 */
348 compatible = "atmel,24c1024";
349 reg = <0x50>;
350 };
351
352 vdd_mpu: regulator@60 {
353 compatible = "ti,tps62363";
354 reg = <0x60>;
355 regulator-name = "VDD_MPU";
356 regulator-min-microvolt = <500000>;
357 regulator-max-microvolt = <1770000>;
358 regulator-always-on;
359 regulator-boot-on;
360 ti,vsel0-state-high;
361 ti,vsel1-state-high;
362 ti,enable-vout-discharge;
363 bootph-all;
364 };
365
366 gpio@38 {
367 compatible = "nxp,pca9554";
368 reg = <0x38>;
369 gpio-controller;
370 #gpio-cells = <2>;
371 };
372
373 pca9554: gpio@39 {
374 compatible = "nxp,pca9554";
375 reg = <0x39>;
376 gpio-controller;
377 #gpio-cells = <2>;
378 pinctrl-names = "default";
379 pinctrl-0 = <&wkup_pca554_default>;
380 interrupt-parent = <&wkup_gpio0>;
381 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
382 interrupt-controller;
383 #interrupt-cells = <2>;
384 };
385 };
386
387 &mcu_i2c0 {
388 status = "okay";
389 pinctrl-names = "default";
390 pinctrl-0 = <&mcu_i2c0_pins_default>;
391 clock-frequency = <400000>;
392 };
393
394 &main_i2c0 {
395 status = "okay";
396 pinctrl-names = "default";
397 pinctrl-0 = <&main_i2c0_pins_default>;
398 clock-frequency = <400000>;
399
400 pca9555: gpio@21 {
401 compatible = "nxp,pca9555";
402 reg = <0x21>;
403 gpio-controller;
404 #gpio-cells = <2>;
405 };
406 };
407
408 &main_i2c1 {
409 status = "okay";
410 pinctrl-names = "default";
411 pinctrl-0 = <&main_i2c1_pins_default>;
412 clock-frequency = <400000>;
413 };
414
415 &main_i2c2 {
416 status = "okay";
417 pinctrl-names = "default";
418 pinctrl-0 = <&main_i2c2_pins_default>;
419 clock-frequency = <400000>;
420 };
421
422 &ecap0 {
423 status = "okay";
424 pinctrl-names = "default";
425 pinctrl-0 = <&ecap0_pins_default>;
426 };
427
428 &main_spi0 {
429 status = "okay";
430 pinctrl-names = "default";
431 pinctrl-0 = <&main_spi0_pins_default>;
432 #address-cells = <1>;
433 #size-cells = <0>;
434 ti,pindir-d0-out-d1-in;
435
436 flash@0 {
437 compatible = "jedec,spi-nor";
438 reg = <0x0>;
439 spi-tx-bus-width = <1>;
440 spi-rx-bus-width = <1>;
441 spi-max-frequency = <48000000>;
442 };
443 };
444
445 &sdhci0 {
446 status = "okay";
447 pinctrl-names = "default";
448 pinctrl-0 = <&main_mmc0_pins_default>;
449 bus-width = <8>;
450 non-removable;
451 ti,driver-strength-ohm = <50>;
452 bootph-all;
453 };
454
455 /*
456 * Because of erratas i2025 and i2026 for silicon revision 1.0, the
457 * SD card interface might fail. Boards with sr1.0 are recommended to
458 * disable sdhci1
459 */
460 &sdhci1 {
461 status = "okay";
462 vmmc-supply = <&vdd_mmc1_sd>;
463 pinctrl-names = "default";
464 pinctrl-0 = <&main_mmc1_pins_default>;
465 ti,driver-strength-ohm = <50>;
466 disable-wp;
467 bootph-all;
468 };
469
470 &usb1 {
471 pinctrl-names = "default";
472 pinctrl-0 = <&usb1_pins_default>;
473 dr_mode = "otg";
474 };
475
476 &dwc3_0 {
477 status = "disabled";
478 };
479
480 &usb0_phy {
481 status = "disabled";
482 };
483
484 &tscadc0 {
485 status = "okay";
486 adc {
487 ti,adc-channels = <0 1 2 3 4 5 6 7>;
488 };
489 };
490
491 &tscadc1 {
492 status = "okay";
493 adc {
494 ti,adc-channels = <0 1 2 3 4 5 6 7>;
495 };
496 };
497
498 &serdes0 {
499 status = "disabled";
500 };
501
502 &serdes1 {
503 status = "disabled";
504 };
505
506 &ospi0 {
507 status = "okay";
508 pinctrl-names = "default";
509 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
510
511 flash@0 {
512 compatible = "jedec,spi-nor";
513 reg = <0x0>;
514 spi-tx-bus-width = <8>;
515 spi-rx-bus-width = <8>;
516 spi-max-frequency = <25000000>;
517 cdns,tshsl-ns = <60>;
518 cdns,tsd2d-ns = <60>;
519 cdns,tchsh-ns = <60>;
520 cdns,tslch-ns = <60>;
521 cdns,read-delay = <0>;
522
523 partitions {
524 compatible = "fixed-partitions";
525 #address-cells = <1>;
526 #size-cells = <1>;
527
528 partition@0 {
529 label = "ospi.tiboot3";
530 reg = <0x0 0x80000>;
531 };
532
533 partition@80000 {
534 label = "ospi.tispl";
535 reg = <0x80000 0x200000>;
536 };
537
538 partition@280000 {
539 label = "ospi.u-boot";
540 reg = <0x280000 0x400000>;
541 };
542
543 partition@680000 {
544 label = "ospi.env";
545 reg = <0x680000 0x20000>;
546 };
547
548 partition@6a0000 {
549 label = "ospi.env.backup";
550 reg = <0x6a0000 0x20000>;
551 };
552
553 partition@6c0000 {
554 label = "ospi.sysfw";
555 reg = <0x6c0000 0x100000>;
556 };
557
558 partition@800000 {
559 label = "ospi.rootfs";
560 reg = <0x800000 0x37c0000>;
561 };
562
563 partition@3fe0000 {
564 label = "ospi.phypattern";
565 reg = <0x3fe0000 0x20000>;
566 };
567 };
568 };
569 };
570
571 &mcu_cpsw {
572 pinctrl-names = "default";
573 pinctrl-0 = <&mcu_cpsw_pins_default>;
574 status = "okay";
575 };
576
577 &davinci_mdio {
578 status = "okay";
579 pinctrl-names = "default";
580 pinctrl-0 = <&mcu_mdio_pins_default>;
581
582 phy0: ethernet-phy@0 {
583 reg = <0>;
584 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
585 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
586 };
587 };
588
589 &cpsw_port1 {
590 phy-mode = "rgmii-id";
591 phy-handle = <&phy0>;
592 };
593
594 &dss {
595 status = "disabled";
596 };
597
598 &wkup_gpio0 {
599 bootph-all;
600 };
601
602 #include "k3-am65-ti-ipc-firmware.dtsi"