| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) Siemens AG, 2018-2024 |
| 4 |
* |
| 5 |
* Authors: |
| 6 |
* Le Jin <[email protected]> |
| 7 |
* Jan Kiszka <[email protected]> |
| 8 |
* |
| 9 |
* Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 |
| 10 |
*/ |
| 11 |
|
| 12 |
#include <dt-bindings/leds/common.h> |
| 13 |
#include <dt-bindings/phy/phy.h> |
| 14 |
#include <dt-bindings/net/ti-dp83867.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
aliases { |
| 18 |
serial0 = &wkup_uart0; |
| 19 |
serial1 = &mcu_uart0; |
| 20 |
serial2 = &main_uart0; |
| 21 |
serial3 = &main_uart1; |
| 22 |
i2c0 = &wkup_i2c0; |
| 23 |
i2c1 = &mcu_i2c0; |
| 24 |
i2c2 = &main_i2c0; |
| 25 |
i2c3 = &main_i2c1; |
| 26 |
i2c4 = &main_i2c2; |
| 27 |
i2c5 = &main_i2c3; |
| 28 |
spi0 = &mcu_spi0; |
| 29 |
mmc0 = &sdhci1; |
| 30 |
mmc1 = &sdhci0; |
| 31 |
ethernet1 = &icssg0_emac0; |
| 32 |
ethernet2 = &icssg0_emac1; |
| 33 |
}; |
| 34 |
|
| 35 |
chosen { |
| 36 |
stdout-path = "serial3:115200n8"; |
| 37 |
}; |
| 38 |
|
| 39 |
reserved_memory: reserved-memory { |
| 40 |
#address-cells = <2>; |
| 41 |
#size-cells = <2>; |
| 42 |
ranges; |
| 43 |
|
| 44 |
secure_ddr: secure-ddr@9e800000 { |
| 45 |
reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ |
| 46 |
alignment = <0x1000>; |
| 47 |
no-map; |
| 48 |
}; |
| 49 |
|
| 50 |
mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { |
| 51 |
compatible = "shared-dma-pool"; |
| 52 |
reg = <0 0xa0000000 0 0x100000>; |
| 53 |
no-map; |
| 54 |
}; |
| 55 |
|
| 56 |
mcu_r5fss0_core0_memory_region: memory@a0100000 { |
| 57 |
compatible = "shared-dma-pool"; |
| 58 |
reg = <0 0xa0100000 0 0xf00000>; |
| 59 |
no-map; |
| 60 |
}; |
| 61 |
|
| 62 |
/* To reserve the power-on(PON) reason for watchdog reset */ |
| 63 |
wdt_reset_memory_region: wdt-memory@a2200000 { |
| 64 |
reg = <0x00 0xa2200000 0x00 0x1000>; |
| 65 |
no-map; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
leds { |
| 70 |
compatible = "gpio-leds"; |
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&leds_pins_default>; |
| 73 |
|
| 74 |
led-0 { |
| 75 |
color = <LED_COLOR_ID_RED>; |
| 76 |
function = LED_FUNCTION_STATUS; |
| 77 |
label = "status-led-red"; |
| 78 |
gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>; |
| 79 |
panic-indicator; |
| 80 |
}; |
| 81 |
|
| 82 |
led-1 { |
| 83 |
color = <LED_COLOR_ID_GREEN>; |
| 84 |
function = LED_FUNCTION_STATUS; |
| 85 |
label = "status-led-green"; |
| 86 |
gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>; |
| 87 |
}; |
| 88 |
|
| 89 |
led-2 { |
| 90 |
color = <LED_COLOR_ID_RED>; |
| 91 |
function = LED_FUNCTION_INDICATOR; |
| 92 |
label = "user-led1-red"; |
| 93 |
gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>; |
| 94 |
}; |
| 95 |
|
| 96 |
led-3 { |
| 97 |
color = <LED_COLOR_ID_GREEN>; |
| 98 |
function = LED_FUNCTION_INDICATOR; |
| 99 |
label = "user-led1-green"; |
| 100 |
gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>; |
| 101 |
}; |
| 102 |
|
| 103 |
led-4 { |
| 104 |
color = <LED_COLOR_ID_RED>; |
| 105 |
function = LED_FUNCTION_INDICATOR; |
| 106 |
label = "user-led2-red"; |
| 107 |
gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>; |
| 108 |
}; |
| 109 |
|
| 110 |
led-5 { |
| 111 |
color = <LED_COLOR_ID_RED>; |
| 112 |
function = LED_FUNCTION_INDICATOR; |
| 113 |
label = "user-led2-green"; |
| 114 |
gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>; |
| 115 |
}; |
| 116 |
}; |
| 117 |
|
| 118 |
dp_refclk: clock { |
| 119 |
compatible = "fixed-clock"; |
| 120 |
#clock-cells = <0>; |
| 121 |
clock-frequency = <19200000>; |
| 122 |
}; |
| 123 |
|
| 124 |
/* Dual Ethernet application node on PRU-ICSSG0 */ |
| 125 |
icssg0_eth: icssg0-eth { |
| 126 |
compatible = "ti,am654-icssg-prueth"; |
| 127 |
pinctrl-names = "default"; |
| 128 |
pinctrl-0 = <&icssg0_rgmii_pins_default>; |
| 129 |
sram = <&msmc_ram>; |
| 130 |
|
| 131 |
ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, |
| 132 |
<&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; |
| 133 |
firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", |
| 134 |
"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", |
| 135 |
"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", |
| 136 |
"ti-pruss/am65x-sr2-pru1-prueth-fw.elf", |
| 137 |
"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", |
| 138 |
"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; |
| 139 |
|
| 140 |
ti,pruss-gp-mux-sel = <2>, /* MII mode */ |
| 141 |
<2>, |
| 142 |
<2>, |
| 143 |
<2>, /* MII mode */ |
| 144 |
<2>, |
| 145 |
<2>; |
| 146 |
|
| 147 |
ti,mii-g-rt = <&icssg0_mii_g_rt>; |
| 148 |
ti,mii-rt = <&icssg0_mii_rt>; |
| 149 |
ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; |
| 150 |
|
| 151 |
interrupt-parent = <&icssg0_intc>; |
| 152 |
interrupts = <24 0 2>, <25 1 3>; |
| 153 |
interrupt-names = "tx_ts0", "tx_ts1"; |
| 154 |
|
| 155 |
dmas = <&main_udmap 0xc100>, /* egress slice 0 */ |
| 156 |
<&main_udmap 0xc101>, /* egress slice 0 */ |
| 157 |
<&main_udmap 0xc102>, /* egress slice 0 */ |
| 158 |
<&main_udmap 0xc103>, /* egress slice 0 */ |
| 159 |
<&main_udmap 0xc104>, /* egress slice 1 */ |
| 160 |
<&main_udmap 0xc105>, /* egress slice 1 */ |
| 161 |
<&main_udmap 0xc106>, /* egress slice 1 */ |
| 162 |
<&main_udmap 0xc107>, /* egress slice 1 */ |
| 163 |
<&main_udmap 0x4100>, /* ingress slice 0 */ |
| 164 |
<&main_udmap 0x4101>; /* ingress slice 1 */ |
| 165 |
dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", |
| 166 |
"tx1-0", "tx1-1", "tx1-2", "tx1-3", |
| 167 |
"rx0", "rx1"; |
| 168 |
|
| 169 |
ethernet-ports { |
| 170 |
#address-cells = <1>; |
| 171 |
#size-cells = <0>; |
| 172 |
icssg0_emac0: port@0 { |
| 173 |
reg = <0>; |
| 174 |
phy-handle = <&icssg0_eth0_phy>; |
| 175 |
phy-mode = "rgmii-id"; |
| 176 |
ti,syscon-rgmii-delay = <&scm_conf 0x4100>; |
| 177 |
ti,half-duplex-capable; |
| 178 |
/* Filled in by bootloader */ |
| 179 |
local-mac-address = [00 00 00 00 00 00]; |
| 180 |
}; |
| 181 |
|
| 182 |
icssg0_emac1: port@1 { |
| 183 |
reg = <1>; |
| 184 |
phy-handle = <&icssg0_eth1_phy>; |
| 185 |
phy-mode = "rgmii-id"; |
| 186 |
ti,syscon-rgmii-delay = <&scm_conf 0x4104>; |
| 187 |
ti,half-duplex-capable; |
| 188 |
/* Filled in by bootloader */ |
| 189 |
local-mac-address = [00 00 00 00 00 00]; |
| 190 |
}; |
| 191 |
}; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&wkup_pmx0 { |
| 196 |
mcu_i2c0_pins_default: mcu-i2c0-default-pins { |
| 197 |
pinctrl-single,pins = < |
| 198 |
/* (AD8) MCU_I2C0_SCL */ |
| 199 |
AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) |
| 200 |
/* (AD7) MCU_I2C0_SDA */ |
| 201 |
AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) |
| 202 |
>; |
| 203 |
}; |
| 204 |
|
| 205 |
push_button_pins_default: push-button-default-pins { |
| 206 |
pinctrl-single,pins = < |
| 207 |
/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ |
| 208 |
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) |
| 209 |
>; |
| 210 |
}; |
| 211 |
|
| 212 |
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { |
| 213 |
pinctrl-single,pins = < |
| 214 |
/* (V1) MCU_OSPI0_CLK */ |
| 215 |
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) |
| 216 |
/* (U2) MCU_OSPI0_DQS */ |
| 217 |
AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) |
| 218 |
/* (U4) MCU_OSPI0_D0 */ |
| 219 |
AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) |
| 220 |
/* (U5) MCU_OSPI0_D1 */ |
| 221 |
AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) |
| 222 |
/* (R4) MCU_OSPI0_CSn0 */ |
| 223 |
AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) |
| 224 |
>; |
| 225 |
}; |
| 226 |
|
| 227 |
db9_com_mode_pins_default: db9-com-mode-default-pins { |
| 228 |
pinctrl-single,pins = < |
| 229 |
/* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */ |
| 230 |
AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7) |
| 231 |
/* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */ |
| 232 |
AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7) |
| 233 |
/* (AC1) WKUP_GPIO0_7, used as uart0 term */ |
| 234 |
AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7) |
| 235 |
/* (AC2) WKUP_GPIO0_6, used as uart0 en */ |
| 236 |
AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7) |
| 237 |
>; |
| 238 |
}; |
| 239 |
|
| 240 |
leds_pins_default: leds-default-pins { |
| 241 |
pinctrl-single,pins = < |
| 242 |
/* (T2) WKUP_GPIO0_17, used as user led1 red */ |
| 243 |
AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7) |
| 244 |
/* (R3) WKUP_GPIO0_22, used as user led1 green */ |
| 245 |
AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7) |
| 246 |
/* (R5) WKUP_GPIO0_24, used as status led red */ |
| 247 |
AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7) |
| 248 |
/* (N2) WKUP_GPIO0_32, used as status led green */ |
| 249 |
AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7) |
| 250 |
>; |
| 251 |
}; |
| 252 |
|
| 253 |
mcu_spi0_pins_default: mcu-spi0-default-pins { |
| 254 |
pinctrl-single,pins = < |
| 255 |
/* (Y1) MCU_SPI0_CLK */ |
| 256 |
AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) |
| 257 |
/* (Y3) MCU_SPI0_D0 */ |
| 258 |
AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) |
| 259 |
/* (Y2) MCU_SPI0_D1 */ |
| 260 |
AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) |
| 261 |
/* (Y4) MCU_SPI0_CS0 */ |
| 262 |
AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) |
| 263 |
>; |
| 264 |
}; |
| 265 |
|
| 266 |
minipcie_pins_default: minipcie-default-pins { |
| 267 |
pinctrl-single,pins = < |
| 268 |
/* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */ |
| 269 |
AM65X_WKUP_IOPAD(0x003c, PIN_OUTPUT, 7) |
| 270 |
>; |
| 271 |
}; |
| 272 |
}; |
| 273 |
|
| 274 |
&main_pmx0 { |
| 275 |
main_pcie_enable_pins_default: main-pcie-enable-default-pins { |
| 276 |
pinctrl-single,pins = < |
| 277 |
AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ |
| 278 |
>; |
| 279 |
}; |
| 280 |
|
| 281 |
main_uart1_pins_default: main-uart1-default-pins { |
| 282 |
pinctrl-single,pins = < |
| 283 |
AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ |
| 284 |
AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */ |
| 285 |
AM65X_IOPAD(0x0178, PIN_INPUT, 6) /* (AD22) UART1_CTSn */ |
| 286 |
AM65X_IOPAD(0x017c, PIN_OUTPUT, 6) /* (AC21) UART1_RTSn */ |
| 287 |
>; |
| 288 |
}; |
| 289 |
|
| 290 |
main_i2c3_pins_default: main-i2c3-default-pins { |
| 291 |
pinctrl-single,pins = < |
| 292 |
AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */ |
| 293 |
AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */ |
| 294 |
>; |
| 295 |
}; |
| 296 |
|
| 297 |
main_mmc1_pins_default: main-mmc1-default-pins { |
| 298 |
pinctrl-single,pins = < |
| 299 |
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ |
| 300 |
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ |
| 301 |
AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ |
| 302 |
AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ |
| 303 |
AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ |
| 304 |
AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ |
| 305 |
AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ |
| 306 |
AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP, 0) /* (C24) MMC1_SDWP */ |
| 307 |
>; |
| 308 |
}; |
| 309 |
|
| 310 |
usb0_pins_default: usb0-default-pins { |
| 311 |
pinctrl-single,pins = < |
| 312 |
AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ |
| 313 |
>; |
| 314 |
}; |
| 315 |
|
| 316 |
usb1_pins_default: usb1-default-pins { |
| 317 |
pinctrl-single,pins = < |
| 318 |
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ |
| 319 |
>; |
| 320 |
}; |
| 321 |
|
| 322 |
main_i2c2_pins_default: main-i2c2-default-pins { |
| 323 |
pinctrl-single,pins = < |
| 324 |
AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ |
| 325 |
AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ |
| 326 |
>; |
| 327 |
}; |
| 328 |
|
| 329 |
icssg0_mdio_pins_default: icssg0-mdio-default-pins { |
| 330 |
pinctrl-single,pins = < |
| 331 |
AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */ |
| 332 |
AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */ |
| 333 |
>; |
| 334 |
}; |
| 335 |
|
| 336 |
icssg0_rgmii_pins_default: icssg0-rgmii-default-pins { |
| 337 |
pinctrl-single,pins = < |
| 338 |
AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ |
| 339 |
AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ |
| 340 |
AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ |
| 341 |
AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ |
| 342 |
AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */ |
| 343 |
AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */ |
| 344 |
AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */ |
| 345 |
AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */ |
| 346 |
AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ |
| 347 |
AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */ |
| 348 |
AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ |
| 349 |
AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ |
| 350 |
|
| 351 |
AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ |
| 352 |
AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ |
| 353 |
AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ |
| 354 |
AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ |
| 355 |
AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */ |
| 356 |
AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */ |
| 357 |
AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */ |
| 358 |
AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */ |
| 359 |
AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ |
| 360 |
AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */ |
| 361 |
AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ |
| 362 |
AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ |
| 363 |
>; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
&main_pmx1 { |
| 368 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 369 |
pinctrl-single,pins = < |
| 370 |
AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ |
| 371 |
AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ |
| 372 |
>; |
| 373 |
}; |
| 374 |
|
| 375 |
main_i2c1_pins_default: main-i2c1-default-pins { |
| 376 |
pinctrl-single,pins = < |
| 377 |
AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ |
| 378 |
AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ |
| 379 |
>; |
| 380 |
}; |
| 381 |
}; |
| 382 |
|
| 383 |
&wkup_uart0 { |
| 384 |
/* Wakeup UART is used by System firmware */ |
| 385 |
status = "reserved"; |
| 386 |
}; |
| 387 |
|
| 388 |
&main_uart1 { |
| 389 |
status = "okay"; |
| 390 |
pinctrl-names = "default"; |
| 391 |
pinctrl-0 = <&main_uart1_pins_default>; |
| 392 |
}; |
| 393 |
|
| 394 |
&main_gpio1 { |
| 395 |
pinctrl-names = "default"; |
| 396 |
pinctrl-0 = <&main_pcie_enable_pins_default>; |
| 397 |
}; |
| 398 |
|
| 399 |
&mcu_i2c0 { |
| 400 |
status = "okay"; |
| 401 |
pinctrl-names = "default"; |
| 402 |
pinctrl-0 = <&mcu_i2c0_pins_default>; |
| 403 |
clock-frequency = <400000>; |
| 404 |
|
| 405 |
psu: regulator@60 { |
| 406 |
compatible = "ti,tps62363"; |
| 407 |
reg = <0x60>; |
| 408 |
regulator-name = "tps62363-vout"; |
| 409 |
regulator-min-microvolt = <500000>; |
| 410 |
regulator-max-microvolt = <1500000>; |
| 411 |
regulator-boot-on; |
| 412 |
ti,vsel0-state-high; |
| 413 |
ti,vsel1-state-high; |
| 414 |
ti,enable-vout-discharge; |
| 415 |
}; |
| 416 |
}; |
| 417 |
|
| 418 |
&main_i2c0 { |
| 419 |
status = "okay"; |
| 420 |
pinctrl-names = "default"; |
| 421 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 422 |
clock-frequency = <400000>; |
| 423 |
|
| 424 |
rtc: rtc@51 { |
| 425 |
compatible = "nxp,pcf8563"; |
| 426 |
reg = <0x51>; |
| 427 |
}; |
| 428 |
|
| 429 |
eeprom: eeprom@54 { |
| 430 |
compatible = "atmel,24c08"; |
| 431 |
reg = <0x54>; |
| 432 |
pagesize = <16>; |
| 433 |
}; |
| 434 |
}; |
| 435 |
|
| 436 |
&main_i2c1 { |
| 437 |
status = "okay"; |
| 438 |
pinctrl-names = "default"; |
| 439 |
pinctrl-0 = <&main_i2c1_pins_default>; |
| 440 |
clock-frequency = <400000>; |
| 441 |
}; |
| 442 |
|
| 443 |
&main_i2c2 { |
| 444 |
status = "okay"; |
| 445 |
pinctrl-names = "default"; |
| 446 |
pinctrl-0 = <&main_i2c2_pins_default>; |
| 447 |
clock-frequency = <400000>; |
| 448 |
}; |
| 449 |
|
| 450 |
&main_i2c3 { |
| 451 |
status = "okay"; |
| 452 |
pinctrl-names = "default"; |
| 453 |
pinctrl-0 = <&main_i2c3_pins_default>; |
| 454 |
clock-frequency = <400000>; |
| 455 |
|
| 456 |
#address-cells = <1>; |
| 457 |
#size-cells = <0>; |
| 458 |
}; |
| 459 |
|
| 460 |
&sdhci1 { |
| 461 |
status = "okay"; |
| 462 |
pinctrl-names = "default"; |
| 463 |
pinctrl-0 = <&main_mmc1_pins_default>; |
| 464 |
ti,driver-strength-ohm = <50>; |
| 465 |
disable-wp; |
| 466 |
}; |
| 467 |
|
| 468 |
&usb0 { |
| 469 |
pinctrl-names = "default"; |
| 470 |
pinctrl-0 = <&usb0_pins_default>; |
| 471 |
dr_mode = "host"; |
| 472 |
}; |
| 473 |
|
| 474 |
&usb1 { |
| 475 |
pinctrl-names = "default"; |
| 476 |
pinctrl-0 = <&usb1_pins_default>; |
| 477 |
dr_mode = "host"; |
| 478 |
}; |
| 479 |
|
| 480 |
&mcu_spi0 { |
| 481 |
status = "okay"; |
| 482 |
#address-cells = <1>; |
| 483 |
#size-cells = <0>; |
| 484 |
ti,pindir-d0-out-d1-in; |
| 485 |
}; |
| 486 |
|
| 487 |
&ospi0 { |
| 488 |
status = "okay"; |
| 489 |
pinctrl-names = "default"; |
| 490 |
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; |
| 491 |
|
| 492 |
flash@0 { |
| 493 |
compatible = "jedec,spi-nor"; |
| 494 |
reg = <0x0>; |
| 495 |
spi-tx-bus-width = <1>; |
| 496 |
spi-rx-bus-width = <1>; |
| 497 |
spi-max-frequency = <50000000>; |
| 498 |
cdns,tshsl-ns = <60>; |
| 499 |
cdns,tsd2d-ns = <60>; |
| 500 |
cdns,tchsh-ns = <60>; |
| 501 |
cdns,tslch-ns = <60>; |
| 502 |
cdns,read-delay = <2>; |
| 503 |
|
| 504 |
partitions { |
| 505 |
compatible = "fixed-partitions"; |
| 506 |
#address-cells = <1>; |
| 507 |
#size-cells = <1>; |
| 508 |
|
| 509 |
seboot@0 { |
| 510 |
label = "seboot"; |
| 511 |
reg = <0x0 0x180000>; /* 1.5M */ |
| 512 |
}; |
| 513 |
|
| 514 |
tispl@180000 { |
| 515 |
label = "tispl"; |
| 516 |
reg = <0x180000 0x200000>; /* 2M */ |
| 517 |
}; |
| 518 |
|
| 519 |
u-boot@380000 { |
| 520 |
label = "u-boot"; |
| 521 |
reg = <0x380000 0x300000>; /* 3M */ |
| 522 |
}; |
| 523 |
|
| 524 |
env@680000 { |
| 525 |
label = "env"; |
| 526 |
reg = <0x680000 0x20000>; /* 128K */ |
| 527 |
}; |
| 528 |
|
| 529 |
env-backup@6a0000 { |
| 530 |
label = "env.backup"; |
| 531 |
reg = <0x6a0000 0x20000>; /* 128K */ |
| 532 |
}; |
| 533 |
|
| 534 |
otpcmd@6c0000 { |
| 535 |
label = "otpcmd"; |
| 536 |
reg = <0x6c0000 0x10000>; /* 64K */ |
| 537 |
}; |
| 538 |
|
| 539 |
unused@6d0000 { |
| 540 |
label = "unused"; |
| 541 |
reg = <0x6d0000 0x7b0000>; /* 7872K */ |
| 542 |
}; |
| 543 |
|
| 544 |
seboot-backup@e80000 { |
| 545 |
label = "seboot.backup"; |
| 546 |
reg = <0xe80000 0x180000>; /* 1.5M */ |
| 547 |
}; |
| 548 |
}; |
| 549 |
}; |
| 550 |
}; |
| 551 |
|
| 552 |
&pcie1_rc { |
| 553 |
status = "okay"; |
| 554 |
pinctrl-names = "default"; |
| 555 |
pinctrl-0 = <&minipcie_pins_default>; |
| 556 |
|
| 557 |
num-lanes = <1>; |
| 558 |
phys = <&serdes1 PHY_TYPE_PCIE 0>; |
| 559 |
phy-names = "pcie-phy0"; |
| 560 |
reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; |
| 561 |
}; |
| 562 |
|
| 563 |
&mcu_rti1 { |
| 564 |
memory-region = <&wdt_reset_memory_region>; |
| 565 |
}; |
| 566 |
|
| 567 |
&icssg0_mdio { |
| 568 |
status = "okay"; |
| 569 |
pinctrl-names = "default"; |
| 570 |
pinctrl-0 = <&icssg0_mdio_pins_default>; |
| 571 |
|
| 572 |
icssg0_eth0_phy: ethernet-phy@0 { |
| 573 |
reg = <0>; |
| 574 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 575 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 576 |
|
| 577 |
leds { |
| 578 |
#address-cells = <1>; |
| 579 |
#size-cells = <0>; |
| 580 |
|
| 581 |
led@0 { |
| 582 |
reg = <0>; |
| 583 |
color = <LED_COLOR_ID_GREEN>; |
| 584 |
function = LED_FUNCTION_LAN; |
| 585 |
}; |
| 586 |
|
| 587 |
led@1 { |
| 588 |
reg = <1>; |
| 589 |
color = <LED_COLOR_ID_GREEN>; |
| 590 |
function = LED_FUNCTION_SPEED_LAN; |
| 591 |
}; |
| 592 |
|
| 593 |
led@2 { |
| 594 |
reg = <2>; |
| 595 |
color = <LED_COLOR_ID_YELLOW>; |
| 596 |
function = LED_FUNCTION_SPEED_LAN; |
| 597 |
}; |
| 598 |
}; |
| 599 |
}; |
| 600 |
|
| 601 |
icssg0_eth1_phy: ethernet-phy@1 { |
| 602 |
reg = <1>; |
| 603 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 604 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 605 |
|
| 606 |
leds { |
| 607 |
#address-cells = <1>; |
| 608 |
#size-cells = <0>; |
| 609 |
|
| 610 |
led@0 { |
| 611 |
reg = <0>; |
| 612 |
color = <LED_COLOR_ID_GREEN>; |
| 613 |
function = LED_FUNCTION_LAN; |
| 614 |
}; |
| 615 |
|
| 616 |
led@1 { |
| 617 |
reg = <1>; |
| 618 |
color = <LED_COLOR_ID_GREEN>; |
| 619 |
function = LED_FUNCTION_SPEED_LAN; |
| 620 |
}; |
| 621 |
|
| 622 |
led@2 { |
| 623 |
reg = <2>; |
| 624 |
color = <LED_COLOR_ID_YELLOW>; |
| 625 |
function = LED_FUNCTION_SPEED_LAN; |
| 626 |
}; |
| 627 |
}; |
| 628 |
}; |
| 629 |
}; |
| 630 |
|
| 631 |
&mcu_r5fss0 { |
| 632 |
/* lock-step mode not supported on iot2050 boards */ |
| 633 |
ti,cluster-mode = <0>; |
| 634 |
}; |
| 635 |
|
| 636 |
#include "k3-am65-ti-ipc-firmware.dtsi" |
| 637 |
|
| 638 |
&rtos_ipc_memory_region { |
| 639 |
reg = <0x00 0xa2000000 0x00 0x00200000>; |
| 640 |
}; |