Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am642-tqma64xxl.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
4 * Copyright (c) 2022-2024 TQ-Systems GmbH <[email protected]>, D-82229 Seefeld, Germany.
5 */
6
7 #include "k3-am642.dtsi"
8
9 / {
10 aliases {
11 i2c0 = &main_i2c0;
12 mmc0 = &sdhci0;
13 spi0 = &ospi0;
14 };
15
16 memory@80000000 {
17 device_type = "memory";
18 /* 1G RAM - default variant */
19 reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
20 bootph-pre-ram;
21 };
22
23 reserved_memory: reserved-memory {
24 #address-cells = <2>;
25 #size-cells = <2>;
26 ranges;
27
28 secure_ddr: optee@9e800000 {
29 reg = <0x00 0x9e800000 0x00 0x01800000>;
30 alignment = <0x1000>;
31 no-map;
32 };
33
34 main_r5fss0_core0_dma_memory_region: memory@a0000000 {
35 compatible = "shared-dma-pool";
36 reg = <0x00 0xa0000000 0x00 0x100000>;
37 no-map;
38 };
39
40 main_r5fss0_core0_memory_region: memory@a0100000 {
41 compatible = "shared-dma-pool";
42 reg = <0x00 0xa0100000 0x00 0xf00000>;
43 no-map;
44 };
45 };
46
47 reg_1v8: regulator-1v8 {
48 compatible = "regulator-fixed";
49 regulator-name = "V_1V8";
50 regulator-min-microvolt = <1800000>;
51 regulator-max-microvolt = <1800000>;
52 regulator-always-on;
53 regulator-boot-on;
54 };
55 };
56
57 &fss {
58 bootph-all;
59 };
60
61 &main_i2c0 {
62 pinctrl-names = "default";
63 pinctrl-0 = <&main_i2c0_pins>;
64 clock-frequency = <400000>;
65 bootph-pre-ram;
66 status = "okay";
67
68 tmp1075: temperature-sensor@4a {
69 compatible = "ti,tmp1075";
70 reg = <0x4a>;
71 vs-supply = <&reg_1v8>;
72 };
73
74 eeprom0: eeprom@50 {
75 compatible = "st,24c02", "atmel,24c02";
76 reg = <0x50>;
77 vcc-supply = <&reg_1v8>;
78 pagesize = <16>;
79 read-only;
80 bootph-pre-ram;
81 };
82
83 pcf85063: rtc@51 {
84 compatible = "nxp,pcf85063a";
85 reg = <0x51>;
86 quartz-load-femtofarads = <12500>;
87 };
88
89 eeprom1: eeprom@54 {
90 compatible = "st,24c64", "atmel,24c64";
91 reg = <0x54>;
92 vcc-supply = <&reg_1v8>;
93 pagesize = <32>;
94 };
95 };
96
97 &ospi0 {
98 pinctrl-names = "default";
99 pinctrl-0 = <&ospi0_pins>;
100 bootph-all;
101 status = "okay";
102
103 flash@0 {
104 compatible = "jedec,spi-nor";
105 reg = <0>;
106 spi-tx-bus-width = <8>;
107 spi-rx-bus-width = <8>;
108 spi-max-frequency = <84000000>;
109 bootph-all;
110 cdns,tshsl-ns = <60>;
111 cdns,tsd2d-ns = <60>;
112 cdns,tchsh-ns = <60>;
113 cdns,tslch-ns = <60>;
114 cdns,read-delay = <2>;
115
116 partitions {
117 compatible = "fixed-partitions";
118 #address-cells = <1>;
119 #size-cells = <1>;
120
121 /* Filled by bootloader */
122 };
123 };
124 };
125
126 &sdhci0 {
127 status = "okay";
128 non-removable;
129 disable-wp;
130 no-sdio;
131 no-sd;
132 bootph-all;
133 ti,driver-strength-ohm = <50>;
134 };
135
136 &main_pmx0 {
137 main_i2c0_pins: main-i2c0-pins {
138 pinctrl-single,pins = <
139 /* (A18) I2C0_SCL */
140 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0)
141 /* (B18) I2C0_SDA */
142 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0)
143 >;
144 bootph-pre-ram;
145 };
146
147 ospi0_pins: ospi0-pins {
148 pinctrl-single,pins = <
149 /* (N20) OSPI0_CLK */
150 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0)
151 /* (L19) OSPI0_CSn0 */
152 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)
153 /* (M19) OSPI0_D0 */
154 AM64X_IOPAD(0x000c, PIN_INPUT, 0)
155 /* (M18) OSPI0_D1 */
156 AM64X_IOPAD(0x0010, PIN_INPUT, 0)
157 /* (M20) OSPI0_D2 */
158 AM64X_IOPAD(0x0014, PIN_INPUT, 0)
159 /* (M21) OSPI0_D3 */
160 AM64X_IOPAD(0x0018, PIN_INPUT, 0)
161 /* (P21) OSPI0_D4 */
162 AM64X_IOPAD(0x001c, PIN_INPUT, 0)
163 /* (P20) OSPI0_D5 */
164 AM64X_IOPAD(0x0020, PIN_INPUT, 0)
165 /* (N18) OSPI0_D6 */
166 AM64X_IOPAD(0x0024, PIN_INPUT, 0)
167 /* (M17) OSPI0_D7 */
168 AM64X_IOPAD(0x0028, PIN_INPUT, 0)
169 /* (N19) OSPI0_DQS */
170 AM64X_IOPAD(0x0008, PIN_INPUT, 0)
171 >;
172 bootph-all;
173 };
174 };
175
176 #include "k3-am64-ti-ipc-firmware.dtsi"