Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am642-sr-som.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2023 Josua Mayer <[email protected]>
4 *
5 */
6
7 #include <dt-bindings/net/ti-dp83869.h>
8
9 / {
10 model = "SolidRun AM642 SoM";
11 compatible = "solidrun,am642-sr-som", "ti,am642";
12
13 aliases {
14 ethernet0 = &cpsw_port1;
15 ethernet1 = &icssg1_emac0;
16 ethernet2 = &icssg1_emac1;
17 mmc0 = &sdhci0;
18 mmc1 = &sdhci1;
19 serial2 = &main_uart0;
20 };
21
22 chosen {
23 /* SoC default UART console */
24 stdout-path = "serial2:115200n8";
25 };
26
27 /* PRU Ethernet Controller */
28 ethernet {
29 compatible = "ti,am642-icssg-prueth";
30 pinctrl-names = "default";
31 pinctrl-0 = <&pru_rgmii1_default_pins>, <&pru_rgmii2_default_pins>;
32
33 sram = <&oc_sram>;
34 ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
35 firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
36 "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
37 "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
38 "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
39 "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
40 "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
41
42 /* configure internal pinmux for mii mode */
43 ti,pruss-gp-mux-sel = <2>, <2>, <2>, <2>, <2>, <2>;
44
45 ti,mii-g-rt = <&icssg1_mii_g_rt>;
46 ti,mii-rt = <&icssg1_mii_rt>;
47 ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
48
49 /*
50 * Configure icssg interrupt controller to map pru-internal
51 * interrupts 8/9 via channels 0/1 to host interrupts 0/1.
52 *
53 * For details see interrupt controller documentation:
54 * Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
55 */
56 interrupt-parent = <&icssg1_intc>;
57 interrupts = <24 0 2>, <25 1 3>;
58 interrupt-names = "tx_ts0", "tx_ts1";
59
60 dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
61 <&main_pktdma 0xc201 15>, /* egress slice 0 */
62 <&main_pktdma 0xc202 15>, /* egress slice 0 */
63 <&main_pktdma 0xc203 15>, /* egress slice 0 */
64 <&main_pktdma 0xc204 15>, /* egress slice 1 */
65 <&main_pktdma 0xc205 15>, /* egress slice 1 */
66 <&main_pktdma 0xc206 15>, /* egress slice 1 */
67 <&main_pktdma 0xc207 15>, /* egress slice 1 */
68 <&main_pktdma 0x4200 15>, /* ingress slice 0 */
69 <&main_pktdma 0x4201 15>; /* ingress slice 1 */
70 dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
71 "tx1-0", "tx1-1", "tx1-2", "tx1-3",
72 "rx0", "rx1";
73
74 ethernet-ports {
75 #address-cells = <1>;
76 #size-cells = <0>;
77
78 icssg1_emac0: port@0 {
79 reg = <0>;
80 ti,syscon-rgmii-delay = <&main_conf 0x4110>;
81 /* Filled in by bootloader */
82 local-mac-address = [00 00 00 00 00 00];
83 phy-handle = <&ethernet_phy2>;
84 phy-mode = "rgmii-id";
85 };
86
87 icssg1_emac1: port@1 {
88 reg = <1>;
89 ti,syscon-rgmii-delay = <&main_conf 0x4114>;
90 /* Filled in by bootloader */
91 local-mac-address = [00 00 00 00 00 00];
92 phy-handle = <&ethernet_phy1>;
93 phy-mode = "rgmii-id";
94 };
95 };
96 };
97
98 /* DDR16SS0:
99 * - Bank 1 @ 0x080000000-0x0FFFFFFFF: max. 2GB in 32-bit address space
100 * - Bank 2 @ 0x880000000-0x9FFFFFFFF: max. 6GB in 64-bit address space
101 */
102 memory@80000000 {
103 reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
104 <0x00000008 0x80000000 0x00000001 0x80000000>;
105 device_type = "memory";
106 };
107
108 reserved_memory: reserved-memory {
109 #address-cells = <2>;
110 #size-cells = <2>;
111 ranges;
112
113 secure_ddr: optee@9e800000 {
114 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
115 no-map;
116 };
117
118 main_r5fss0_core0_dma_memory_region: memory@a0000000 {
119 compatible = "shared-dma-pool";
120 reg = <0x00 0xa0000000 0x00 0x100000>;
121 no-map;
122 };
123
124 main_r5fss0_core0_memory_region: memory@a0100000 {
125 compatible = "shared-dma-pool";
126 reg = <0x00 0xa0100000 0x00 0xf00000>;
127 no-map;
128 };
129 };
130
131 vdd_mmc0: regulator-vdd-mmc0 {
132 compatible = "regulator-fixed";
133 regulator-name = "vdd-mmc0";
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <1800000>;
136 regulator-always-on;
137 regulator-boot-on;
138 };
139 };
140
141 &cpsw3g {
142 pinctrl-names = "default";
143 pinctrl-0 = <&rgmii1_default_pins>;
144 status = "okay";
145 };
146
147 &cpsw3g_mdio {
148 pinctrl-names = "default";
149 pinctrl-0 = <&mdio0_default_pins>;
150 status = "okay";
151
152 ethernet_phy0: ethernet-phy@0 {
153 compatible = "ethernet-phy-id2000.a0f1";
154 reg = <0>;
155 pinctrl-names = "default";
156 pinctrl-0 = <&ethernet_phy0_default_pins>;
157 ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
158 ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
159 /*
160 * Disable interrupts because ISR never clears 0x0040
161 *
162 * interrupt-parent = <&main_gpio1>;
163 * interrupts = <70 IRQ_TYPE_LEVEL_LOW>;
164 */
165 /*
166 * Disable HW Reset because clock signal is daisy-chained
167 *
168 * reset-gpios = <&main_gpio0 84 GPIO_ACTIVE_LOW>;
169 * reset-assert-us = <1>;
170 * reset-deassert-us = <30>;
171 */
172 };
173 };
174
175 &cpsw_port1 {
176 phy-mode = "rgmii-id";
177 phy-handle = <&ethernet_phy0>;
178 status = "okay";
179 };
180
181 &icssg1_mdio {
182 pinctrl-names = "default";
183 pinctrl-0 = <&pru1_mdio0_default_pins>;
184 status = "okay";
185
186 ethernet_phy1: ethernet-phy@3 {
187 compatible = "ethernet-phy-id2000.a0f1";
188 reg = <3>;
189 pinctrl-names = "default";
190 pinctrl-0 = <&ethernet_phy1_default_pins>;
191 ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
192 ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
193 /*
194 * Disable interrupts because ISR never clears 0x0040
195 *
196 * interrupt-parent = <&main_gpio1>;
197 * interrupts = <70 IRQ_TYPE_LEVEL_LOW>;
198 */
199 /*
200 * Disable HW Reset because clock signal is daisy-chained
201 *
202 * reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>;
203 * reset-assert-us = <1>;
204 * reset-deassert-us = <30>;
205 */
206 };
207
208 ethernet_phy2: ethernet-phy@f {
209 compatible = "ethernet-phy-id2000.a0f1";
210 reg = <0xf>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&ethernet_phy2_default_pins>;
213 ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
214 /*
215 * Disable interrupts because ISR never clears 0x0040
216 *
217 * interrupt-parent = <&main_gpio1>;
218 * interrupts = <70 IRQ_TYPE_LEVEL_LOW>;
219 */
220 /*
221 * Disable HW Reset because clock signal is daisy-chained
222 *
223 * reset-gpios = <&main_gpio0 52 GPIO_ACTIVE_LOW>;
224 * reset-assert-us = <1>;
225 * reset-deassert-us = <30>;
226 */
227 };
228 };
229
230 &main_i2c0 {
231 pinctrl-names = "default";
232 pinctrl-0 = <&main_i2c0_default_pins>;
233 status = "okay";
234
235 som_eeprom: eeprom@50 {
236 compatible = "atmel,24c01";
237 reg = <0x50>;
238 pagesize = <8>;
239 };
240 };
241
242 &main_pmx0 {
243 /* hog global functions */
244 pinctrl-names = "default";
245 pinctrl-0 = <&ethernet_phy_default_pins>;
246
247 ethernet_phy_default_pins: ethernet-phy-default-pins {
248 pinctrl-single,pins = <
249 /* interrupt / power-down, external pull-up on SoM */
250 AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* EXTINTn.GPIO1_70 */
251 >;
252 };
253
254 ethernet_phy0_default_pins: ethernet-phy0-default-pins {
255 pinctrl-single,pins = <
256 /* reset */
257 AM64X_IOPAD(0x0154, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */
258 /* reference clock */
259 AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */
260 >;
261 };
262
263 ethernet_phy1_default_pins: ethernet-phy1-default-pins {
264 pinctrl-single,pins = <
265 /* reset */
266 AM64X_IOPAD(0x0150, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */
267 /* led0, external pull-down on SoM */
268 AM64X_IOPAD(0x0128, PIN_INPUT, 7) /* PRG1_PRU1_GPO8.GPIO0_73 */
269 /* led1/rxer */
270 AM64X_IOPAD(0x011c, PIN_INPUT, 7) /* PRG1_PRU1_GPO5.GPIO0_70 */
271 >;
272 };
273
274 ethernet_phy2_default_pins: ethernet-phy2-default-pins {
275 pinctrl-single,pins = <
276 /* reset */
277 AM64X_IOPAD(0x00d4, PIN_OUTPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */
278 /* led0, external pull-down on SoM */
279 AM64X_IOPAD(0x00d8, PIN_INPUT, 7) /* PRG1_PRU0_GPO8.GPIO0_53 */
280 /* led1/rxer */
281 AM64X_IOPAD(0x00cc, PIN_INPUT, 7) /* PRG1_PRU0_GPO5.GPIO0_50 */
282 >;
283 };
284
285 main_i2c0_default_pins: main-i2c0-default-pins {
286 pinctrl-single,pins = <
287 /* external pull-up on SoM */
288 AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* I2C0_SCL.I2C0_SCL */
289 AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* I2C0_SDA.I2C0_SDA */
290 >;
291 };
292
293 /*
294 * main_mmc0_default_pins: main-mmc0-default-pins
295 *
296 * MMC0_CMD: no padconfig
297 * MMC0_CLK: no padconfig, external pull-up on SoM
298 * MMC0_DAT0: no padconfig
299 * MMC0_DAT1: no padconfig
300 * MMC0_DAT2: no padconfig
301 * MMC0_DAT3: no padconfig
302 * MMC0_DAT4: no padconfig
303 * MMC0_DAT5: no padconfig
304 * MMC0_DAT6: no padconfig
305 * MMC0_DAT7: no padconfig
306 * MMC0_DS: no padconfig, external pull-down on SoM
307 */
308
309 main_mmc1_default_pins: main-mmc1-default-pins {
310 pinctrl-single,pins = <
311 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
312 AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* MMC1_CLK.MMC1_CLK */
313 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* MMC1_DAT0.MMC1_DAT0 */
314 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* MMC1_DAT1.MMC1_DAT1 */
315 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* MMC1_DAT2.MMC1_DAT2 */
316 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* MMC1_DAT3.MMC1_DAT3 */
317 /* external pull-down on SoM & Carrier */
318 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* MMC1_SDCD.MMC1_SDCD */
319 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB: clock loopback */
320 >;
321 };
322
323 main_uart0_default_pins: main-uart0-default-pins {
324 pinctrl-single,pins = <
325 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* UART0_RXD.UART0_RXD */
326 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* UART0_TXD.UART0_TXD */
327 >;
328 };
329
330 mdio0_default_pins: mdio0-default-pins {
331 pinctrl-single,pins = <
332 AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* PRG0_PRU1_GPO19.MDIO0_MDC */
333 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* PRG0_PRU1_GPO18.MDIO0_MDIO */
334 >;
335 };
336
337 ospi0_default_pins: ospi0-default-pins {
338 pinctrl-single,pins = <
339 /* external pull-down on SoM */
340 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* OSPI0_CLK.OSPI0_CLK */
341 AM64X_IOPAD(0x0008, PIN_OUTPUT, 0) /* OSPI0_DQS.OSPI0_DQS */
342 /* external pull-up on SoM */
343 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* OSPI0_CSn0.OSPI0_CSn0 */
344 AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* OSPI0_D0.OSPI0_D0 */
345 AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* OSPI0_D1.OSPI0_D1 */
346 AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* OSPI0_D2.OSPI0_D2 */
347 AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* OSPI0_D3.OSPI0_D3 */
348 AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* OSPI0_D4.OSPI0_D4 */
349 AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* OSPI0_D5.OSPI0_D5 */
350 AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* OSPI0_D6.OSPI0_D6 */
351 AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* OSPI0_D7.OSPI0_D7 */
352 >;
353 };
354
355 ospi0_flash0_default_pins: ospi0-flash0-default-pins {
356 pinctrl-single,pins = <
357 AM64X_IOPAD(0x0034, PIN_OUTPUT, 7) /* OSPI0_CSn2.GPIO0_13 */
358 AM64X_IOPAD(0x0038, PIN_INPUT, 7) /* OSPI0_CSn3.GPIO0_14 */
359 >;
360 };
361
362 pru1_mdio0_default_pins: pru1-mdio0-default-pins {
363 pinctrl-single,pins = <
364 AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* PRG1_MDIO0_MDC.PRG1_MDIO0_MDC */
365 AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* PRG1_MDIO0_MDIO.PRG1_MDIO0_MDIO */
366 >;
367 };
368
369 pru_rgmii1_default_pins: pru-rgmii1-default-pins {
370 pinctrl-single,pins = <
371 AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
372 AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
373 AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
374 AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
375 AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
376 AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
377 AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
378 AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
379 AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
380 AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
381 AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
382 AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
383 >;
384 };
385
386 pru_rgmii2_default_pins: pru-rgmii2-default-pins {
387 pinctrl-single,pins = <
388 AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* PRG1_PRU1_GPO0.RGMII2_RD0 */
389 AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* PRG1_PRU1_GPO1.RGMII2_RD1 */
390 AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* PRG1_PRU1_GPO2.RGMII2_RD2 */
391 AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* PRG1_PRU1_GPO3.RGMII2_RD3 */
392 AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* PRG1_PRU1_GPO6.RGMII2_RXC */
393 AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* PRG1_PRU1_GPO4.RGMII2_RX_CTL */
394 AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO11.RGMII2_TD0 */
395 AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO12.RGMII2_TD1 */
396 AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO13.RGMII2_TD2 */
397 AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO14.RGMII2_TD3 */
398 AM64X_IOPAD(0x0148, PIN_INPUT, 2) /* PRG1_PRU1_GPO16.RGMII2_TXC */
399 AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO15.RGMII2_TX_CTL */
400 >;
401 };
402
403 rgmii1_default_pins: rgmii1-default-pins {
404 pinctrl-single,pins = <
405 AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* PRG0_PRU1_GPO7.RGMII1_RD0 */
406 AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* PRG0_PRU1_GPO9.RGMII1_RD1 */
407 AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* PRG0_PRU1_GPO10.RGMII1_RD2 */
408 AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* PRG0_PRU1_GPO17.RGMII1_RD3 */
409 AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* PRG0_PRU0_GPO10.RGMII1_RXC */
410 AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* PRG0_PRU0_GPO9.RGMII1_RX_CTL */
411 AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO7.RGMII1_TD0 */
412 AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO9.RGMII1_TD1 */
413 AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO10.RGMII1_TD2 */
414 AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO17.RGMII1_TD3 */
415 AM64X_IOPAD(0x00e0, PIN_INPUT, 4) /* PRG1_PRU0_GPO10.RGMII1_TXC */
416 AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* PRG1_PRU0_GPO9.RGMII1_TX_CTL */
417 >;
418 };
419
420 usb0_default_pins: usb0-default-pins {
421 pinctrl-single,pins = <
422 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* USB0_DRVVBUS.USB0_DRVVBUS */
423 >;
424 };
425 };
426
427 /* SoC default UART console */
428 &main_uart0 {
429 pinctrl-names = "default";
430 pinctrl-0 = <&main_uart0_default_pins>;
431 status = "okay";
432 };
433
434 &ospi0 {
435 pinctrl-names = "default";
436 pinctrl-0 = <&ospi0_default_pins>;
437 num-cs = <1>;
438 status = "okay";
439
440 flash@0 {
441 compatible = "jedec,spi-nor";
442 reg = <0>;
443 pinctrl-names = "default";
444 pinctrl-0 = <&ospi0_flash0_default_pins>;
445 spi-tx-bus-width = <8>;
446 spi-rx-bus-width = <8>;
447 spi-max-frequency = <200000000>;
448 cdns,tshsl-ns = <50>;
449 cdns,tsd2d-ns = <50>;
450 cdns,tchsh-ns = <4>;
451 cdns,tslch-ns = <4>;
452 cdns,read-delay = <0>;
453 interrupt-parent = <&main_gpio0>;
454 interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
455 reset-gpios = <&main_gpio0 13 GPIO_ACTIVE_LOW>;
456 };
457 };
458
459 &sdhci0 {
460 /* mmc0 pins have no padconfig */
461 bus-width = <8>;
462 ti,driver-strength-ohm = <50>;
463 disable-wp;
464 non-removable;
465 cap-mmc-hw-reset;
466 no-sd;
467 /*
468 * MMC controller supports switching between 1.8V and 3.3V signalling.
469 * However MMC0 (unlike MMC1) does not integrate an LDO.
470 * Explicitly link a regulator node for indicating to the driver which
471 * voltages are actually usable.
472 */
473 vqmmc-supply = <&vdd_mmc0>;
474 status = "okay";
475 };
476
477 /*
478 * microSD is on carrier - however since SoC can boot from it,
479 * configure it just in case.
480 */
481 &sdhci1 {
482 pinctrl-names = "default";
483 pinctrl-0 = <&main_mmc1_default_pins>;
484 bus-width = <4>;
485 ti,driver-strength-ohm = <50>;
486 disable-wp;
487 status = "okay";
488 };
489
490 /*
491 * USB settings are a carrier choice - however since SoC can boot from it,
492 * configure as USB-2.0 OTG here, keeping USB-3 serdes disabled.
493 */
494 &usb0 {
495 pinctrl-names = "default";
496 pinctrl-0 = <&usb0_default_pins>;
497 dr_mode = "otg";
498 maximum-speed = "high-speed";
499 };
500
501 &usbss0 {
502 ti,vbus-divider;
503 ti,usb2-only;
504 };
505
506 #include "k3-am64-ti-ipc-firmware.dtsi"