Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am642-phyboard-electra-rdk.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com
4 * Author: Matt McKee <[email protected]>
5 *
6 * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
7 * Author: Wadim Egorov <[email protected]>
8 *
9 * Product homepage:
10 * https://www.phytec.com/product/phyboard-am64x
11 */
12
13 /dts-v1/;
14
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
17 #include <dt-bindings/leds/common.h>
18 #include <dt-bindings/leds/leds-pca9532.h>
19 #include <dt-bindings/phy/phy.h>
20 #include "k3-am642.dtsi"
21 #include "k3-am64-phycore-som.dtsi"
22
23 #include "k3-serdes.h"
24
25 / {
26 compatible = "phytec,am642-phyboard-electra-rdk",
27 "phytec,am64-phycore-som", "ti,am642";
28 model = "PHYTEC phyBOARD-Electra-AM64x RDK";
29
30 aliases {
31 ethernet1 = &icssg0_emac0;
32 ethernet2 = &icssg0_emac1;
33 mmc1 = &sdhci1;
34 serial2 = &main_uart0;
35 serial3 = &main_uart1;
36 };
37
38 chosen {
39 stdout-path = &main_uart0;
40 };
41
42 can_tc1: can-phy0 {
43 compatible = "ti,tcan1042";
44 pinctrl-names = "default";
45 pinctrl-0 = <&can_tc1_pins_default>;
46 #phy-cells = <0>;
47 max-bitrate = <8000000>;
48 standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
49 };
50
51 can_tc2: can-phy1 {
52 compatible = "ti,tcan1042";
53 pinctrl-names = "default";
54 pinctrl-0 = <&can_tc2_pins_default>;
55 #phy-cells = <0>;
56 max-bitrate = <8000000>;
57 standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
58 };
59
60 /* Dual Ethernet application node on PRU-ICSSG0 */
61 ethernet {
62 compatible = "ti,am642-icssg-prueth";
63 pinctrl-names = "default";
64 pinctrl-0 = <&icssg0_rgmii1_pins_default>, <&icssg0_rgmii2_pins_default>;
65
66 interrupt-parent = <&icssg0_intc>;
67 interrupts = <24 0 2>, <25 1 3>;
68 interrupt-names = "tx_ts0", "tx_ts1";
69
70 sram = <&oc_sram>;
71 firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
72 "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
73 "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
74 "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
75 "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
76 "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
77
78 dmas = <&main_pktdma 0xc100 15>, /* egress slice 0 */
79 <&main_pktdma 0xc101 15>, /* egress slice 0 */
80 <&main_pktdma 0xc102 15>, /* egress slice 0 */
81 <&main_pktdma 0xc103 15>, /* egress slice 0 */
82 <&main_pktdma 0xc104 15>, /* egress slice 1 */
83 <&main_pktdma 0xc105 15>, /* egress slice 1 */
84 <&main_pktdma 0xc106 15>, /* egress slice 1 */
85 <&main_pktdma 0xc107 15>, /* egress slice 1 */
86 <&main_pktdma 0x4100 15>, /* ingress slice 0 */
87 <&main_pktdma 0x4101 15>; /* ingress slice 1 */
88 dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
89 "tx1-0", "tx1-1", "tx1-2", "tx1-3",
90 "rx0", "rx1";
91
92 ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
93 ti,pruss-gp-mux-sel = <2>, /* MII mode */
94 <2>,
95 <2>,
96 <2>, /* MII mode */
97 <2>,
98 <2>;
99
100 ti,mii-g-rt = <&icssg0_mii_g_rt>;
101 ti,mii-rt = <&icssg0_mii_rt>;
102 ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
103 ti,pa-stats = <&icssg0_pa_stats>;
104
105 ethernet-ports {
106 #address-cells = <1>;
107 #size-cells = <0>;
108 icssg0_emac0: port@0 {
109 reg = <0>;
110 phy-handle = <&icssg0_phy1>;
111 phy-mode = "rgmii-id";
112 /* Filled in by bootloader */
113 local-mac-address = [00 00 00 00 00 00];
114 ti,syscon-rgmii-delay = <&main_conf 0x4100>;
115 };
116
117 icssg0_emac1: port@1 {
118 reg = <1>;
119 phy-handle = <&icssg0_phy2>;
120 phy-mode = "rgmii-id";
121 /* Filled in by bootloader */
122 local-mac-address = [00 00 00 00 00 00];
123 ti,syscon-rgmii-delay = <&main_conf 0x4104>;
124 };
125 };
126 };
127
128 keys {
129 compatible = "gpio-keys";
130 autorepeat;
131 pinctrl-names = "default";
132 pinctrl-0 = <&gpio_keys_pins_default>;
133
134 key-home {
135 label = "home";
136 linux,code = <KEY_HOME>;
137 gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
138 };
139
140 key-menu {
141 label = "menu";
142 linux,code = <KEY_MENU>;
143 gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
144 };
145 };
146
147 leds {
148 compatible = "gpio-leds";
149 pinctrl-names = "default";
150 pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
151
152 led-1 {
153 color = <LED_COLOR_ID_RED>;
154 gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
155 linux,default-trigger = "mmc0";
156 function = LED_FUNCTION_DISK;
157 };
158
159 led-2 {
160 color = <LED_COLOR_ID_GREEN>;
161 gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>;
162 linux,default-trigger = "mmc1";
163 function = LED_FUNCTION_DISK;
164 };
165 };
166
167 vcc_3v3_mmc: regulator-sd {
168 /* TPS22963C */
169 compatible = "regulator-fixed";
170 regulator-name = "VCC_3V3_MMC";
171 regulator-min-microvolt = <3300000>;
172 regulator-max-microvolt = <3300000>;
173 regulator-boot-on;
174 regulator-always-on;
175 bootph-all;
176 };
177 };
178
179 &main_pmx0 {
180 can_tc1_pins_default: can-tc1-default-pins {
181 pinctrl-single,pins = <
182 AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */
183 >;
184 };
185
186 can_tc2_pins_default: can-tc2-default-pins {
187 pinctrl-single,pins = <
188 AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */
189 >;
190 };
191
192 clkout0_pins_default: clkout0-default-pins {
193 pinctrl-single,pins = <
194 AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* (A19) EXT_REFCLK1.CLKOUT0 */
195 >;
196 };
197
198 gpio_keys_pins_default: gpio-keys-default-pins {
199 pinctrl-single,pins = <
200 AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */
201 AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */
202 >;
203 };
204
205 icssg0_mdio_pins_default: icssg0-mdio-default-pins {
206 pinctrl-single,pins = <
207 AM64X_IOPAD(0x0200, PIN_INPUT, 0) /* (P2) PRG0_MDIO0_MDIO */
208 AM64X_IOPAD(0x0204, PIN_OUTPUT, 0) /* (P3) PRG0_MDIO0_MDC */
209 AM64X_IOPAD(0x01a8, PIN_OUTPUT, 7) /* (V1) PRG0_PRU0_GPO18.GPIO1_18 */
210 AM64X_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (W1) PRG0_PRU0_GPO19.GPIO1_19 */
211 >;
212 };
213
214 icssg0_rgmii1_pins_default: icssg0-rgmii1-default-pins {
215 pinctrl-single,pins = <
216 AM64X_IOPAD(0x0160, PIN_INPUT, 2) /* (Y1) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
217 AM64X_IOPAD(0x0164, PIN_INPUT, 2) /* (R4) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
218 AM64X_IOPAD(0x0168, PIN_INPUT, 2) /* (U2) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
219 AM64X_IOPAD(0x016c, PIN_INPUT, 2) /* (V2) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
220 AM64X_IOPAD(0x0170, PIN_INPUT, 2) /* (AA2) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
221 AM64X_IOPAD(0x0178, PIN_INPUT, 2) /* (T3) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
222 AM64X_IOPAD(0x018c, PIN_OUTPUT, 2) /* (Y3) PRG0_PRU0_GPO11.PRG0_RGMII1_TD0 */
223 AM64X_IOPAD(0x0190, PIN_OUTPUT, 2) /* (AA3) PRG0_PRU0_GPO12.PRG0_RGMII1_TD1 */
224 AM64X_IOPAD(0x0194, PIN_OUTPUT, 2) /* (R6) PRG0_PRU0_GPO13.PRG0_RGMII1_TD2 */
225 AM64X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (V4) PRG0_PRU0_GPO14.PRG0_RGMII1_TD3 */
226 AM64X_IOPAD(0x019c, PIN_OUTPUT, 2) /* (T5) PRG0_PRU0_GPO15.PRG0_RGMII1_TX_CTL */
227 AM64X_IOPAD(0x01a0, PIN_OUTPUT, 2) /* (U4) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
228 >;
229 };
230
231 icssg0_rgmii2_pins_default: icssg0-rgmii2-default-pins {
232 pinctrl-single,pins = <
233 AM64X_IOPAD(0x01b0, PIN_INPUT, 2) /* (Y2) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
234 AM64X_IOPAD(0x01b4, PIN_INPUT, 2) /* (W2) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
235 AM64X_IOPAD(0x01b8, PIN_INPUT, 2) /* (V3) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
236 AM64X_IOPAD(0x01bc, PIN_INPUT, 2) /* (T4) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
237 AM64X_IOPAD(0x01c0, PIN_INPUT, 2) /* (W3) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
238 AM64X_IOPAD(0x01c8, PIN_INPUT, 2) /* (R5) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
239 AM64X_IOPAD(0x01dc, PIN_OUTPUT, 2) /* (W4) PRG0_PRU1_GPO11.PRG0_RGMII2_TD0 */
240 AM64X_IOPAD(0x01e0, PIN_OUTPUT, 2) /* (Y4) PRG0_PRU1_GPO12.PRG0_RGMII2_TD1 */
241 AM64X_IOPAD(0x01e4, PIN_OUTPUT, 2) /* (T6) PRG0_PRU1_GPO13.PRG0_RGMII2_TD2 */
242 AM64X_IOPAD(0x01e8, PIN_OUTPUT, 2) /* (U6) PRG0_PRU1_GPO14.PRG0_RGMII2_TD3 */
243 AM64X_IOPAD(0x01ec, PIN_OUTPUT, 2) /* (U5) PRG0_PRU1_GPO15.PRG0_RGMII2_TX_CTL */
244 AM64X_IOPAD(0x01f0, PIN_OUTPUT, 2) /* (AA4) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
245 >;
246 };
247
248 main_i2c1_pins_default: main-i2c1-default-pins {
249 pinctrl-single,pins = <
250 AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */
251 AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */
252 >;
253 };
254
255 main_mcan0_pins_default: main-mcan0-default-pins {
256 pinctrl-single,pins = <
257 AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
258 AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
259 >;
260 };
261
262 main_mcan1_pins_default: main-mcan1-default-pins {
263 pinctrl-single,pins = <
264 AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
265 AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
266 >;
267 };
268
269 main_mmc1_pins_default: main-mmc1-default-pins {
270 pinctrl-single,pins = <
271 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
272 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
273 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
274 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
275 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
276 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
277 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
278 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
279 >;
280 bootph-all;
281 };
282
283 main_spi0_pins_default: main-spi0-default-pins {
284 pinctrl-single,pins = <
285 AM64X_IOPAD(0x020c, PIN_OUTPUT, 7) /* (C13) SPI0_CS1.GPIO1_43 */
286 AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */
287 AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */
288 AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */
289 >;
290 };
291
292 main_uart0_pins_default: main-uart0-default-pins {
293 pinctrl-single,pins = <
294 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
295 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
296 >;
297 bootph-all;
298 };
299
300 main_uart1_pins_default: main-uart1-default-pins {
301 pinctrl-single,pins = <
302 AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
303 AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
304 AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
305 AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
306 >;
307 };
308
309 main_usb0_pins_default: main-usb0-default-pins {
310 pinctrl-single,pins = <
311 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
312 >;
313 };
314
315 user_leds_pins_default: user-leds-default-pins {
316 pinctrl-single,pins = <
317 AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */
318 AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */
319 >;
320 };
321 };
322
323 &icssg0_mdio {
324 pinctrl-names = "default";
325 pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>;
326 assigned-clocks = <&k3_clks 157 123>;
327 assigned-clock-parents = <&k3_clks 157 125>;
328 status = "okay";
329
330 icssg0_phy1: ethernet-phy@1 {
331 compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
332 reg = <0x1>;
333 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
334 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
335 reset-gpios = <&main_gpio1 18 GPIO_ACTIVE_LOW>;
336 reset-assert-us = <1000>;
337 reset-deassert-us = <1000>;
338 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
339 };
340
341 icssg0_phy2: ethernet-phy@2 {
342 compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
343 reg = <0x2>;
344 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
345 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
346 reset-gpios = <&main_gpio1 19 GPIO_ACTIVE_LOW>;
347 reset-assert-us = <1000>;
348 reset-deassert-us = <1000>;
349 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
350 };
351 };
352
353 &i2c_som_rtc {
354 trickle-resistor-ohms = <3000>;
355 };
356
357 &main_i2c1 {
358 pinctrl-names = "default";
359 pinctrl-0 = <&main_i2c1_pins_default>;
360 clock-frequency = <400000>;
361 status = "okay";
362
363 eeprom@51 {
364 compatible = "atmel,24c02";
365 pagesize = <16>;
366 reg = <0x51>;
367 };
368
369 led-controller@62 {
370 compatible = "nxp,pca9533";
371 reg = <0x62>;
372
373 led-3 {
374 label = "red:user";
375 type = <PCA9532_TYPE_LED>;
376 };
377
378 led-4 {
379 label = "green:user";
380 type = <PCA9532_TYPE_LED>;
381 };
382
383 led-5 {
384 label = "blue:user";
385 type = <PCA9532_TYPE_LED>;
386 };
387 };
388 };
389
390 &main_mcan0 {
391 pinctrl-names = "default";
392 pinctrl-0 = <&main_mcan0_pins_default>;
393 phys = <&can_tc1>;
394 status = "okay";
395 };
396
397 &main_mcan1 {
398 pinctrl-names = "default";
399 pinctrl-0 = <&main_mcan1_pins_default>;
400 phys = <&can_tc2>;
401 status = "okay";
402 };
403
404 &main_spi0 {
405 pinctrl-names = "default";
406 pinctrl-0 = <&main_spi0_pins_default>;
407 cs-gpios = <0>, <&main_gpio1 43 GPIO_ACTIVE_LOW>;
408 ti,pindir-d0-out-d1-in;
409 status = "okay";
410
411 tpm@1 {
412 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
413 reg = <1>;
414 spi-max-frequency = <10000000>;
415 };
416 };
417
418 &main_uart0 {
419 pinctrl-names = "default";
420 pinctrl-0 = <&main_uart0_pins_default>;
421 bootph-all;
422 status = "okay";
423 };
424
425 &main_uart1 {
426 pinctrl-names = "default";
427 pinctrl-0 = <&main_uart1_pins_default>;
428 uart-has-rtscts;
429 status = "okay";
430 };
431
432 &sdhci1 {
433 vmmc-supply = <&vcc_3v3_mmc>;
434 pinctrl-names = "default";
435 pinctrl-0 = <&main_mmc1_pins_default>;
436 disable-wp;
437 no-1-8-v;
438 bootph-all;
439 status = "okay";
440 };
441
442 &serdes0 {
443 serdes0_pcie_usb_link: phy@0 {
444 reg = <0>;
445 cdns,num-lanes = <1>;
446 #phy-cells = <0>;
447 cdns,phy-type = <PHY_TYPE_USB3>;
448 resets = <&serdes_wiz0 1>;
449 };
450 };
451
452 &serdes_ln_ctrl {
453 idle-states = <AM64_SERDES0_LANE0_USB>;
454 };
455
456 &usbss0 {
457 ti,vbus-divider;
458 };
459
460 &usb0 {
461 pinctrl-names = "default";
462 pinctrl-0 = <&main_usb0_pins_default>;
463 dr_mode = "host";
464 maximum-speed = "super-speed";
465 phys = <&serdes0_pcie_usb_link>;
466 phy-names = "cdns3,usb3-phy";
467 };