| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Copyright (C) 2023 Josua Mayer <[email protected]> |
| 4 |
* |
| 5 |
* DTS for SolidRun AM642 HummingBoard-T, |
| 6 |
* running on Cortex A53. |
| 7 |
* |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
|
| 12 |
#include <dt-bindings/leds/common.h> |
| 13 |
#include <dt-bindings/phy/phy.h> |
| 14 |
|
| 15 |
#include "k3-am642.dtsi" |
| 16 |
#include "k3-am642-sr-som.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "SolidRun AM642 HummingBoard-T"; |
| 20 |
compatible = "solidrun,am642-hummingboard-t", "solidrun,am642-sr-som", "ti,am642"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
serial5 = &main_uart3; |
| 24 |
}; |
| 25 |
|
| 26 |
leds { |
| 27 |
compatible = "gpio-leds"; |
| 28 |
pinctrl-names = "default"; |
| 29 |
pinctrl-0 = <&leds_default_pins>; |
| 30 |
|
| 31 |
/* D24 */ |
| 32 |
led1: led-1 { |
| 33 |
label = "led1"; |
| 34 |
gpios = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; |
| 35 |
color = <LED_COLOR_ID_GREEN>; |
| 36 |
}; |
| 37 |
|
| 38 |
/* D25 */ |
| 39 |
led2: led-2 { |
| 40 |
label = "led2"; |
| 41 |
gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; |
| 42 |
color = <LED_COLOR_ID_GREEN>; |
| 43 |
}; |
| 44 |
|
| 45 |
/* D26 */ |
| 46 |
led3: led-3 { |
| 47 |
label = "led3"; |
| 48 |
gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>; |
| 49 |
color = <LED_COLOR_ID_GREEN>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
regulator-m2-3v3 { |
| 54 |
compatible = "regulator-fixed"; |
| 55 |
pinctrl-names = "default"; |
| 56 |
pinctrl-0 = <®ulator_pcie_3v3_default_pins>; |
| 57 |
regulator-name = "m2-3v3"; |
| 58 |
regulator-min-microvolt = <3300000>; |
| 59 |
regulator-max-microvolt = <3300000>; |
| 60 |
gpio = <&main_gpio1 17 GPIO_ACTIVE_HIGH>; |
| 61 |
enable-active-high; |
| 62 |
regulator-always-on; |
| 63 |
}; |
| 64 |
|
| 65 |
regulator-vpp-1v8 { |
| 66 |
compatible = "regulator-fixed"; |
| 67 |
pinctrl-names = "default"; |
| 68 |
pinctrl-0 = <®ulator_vpp_1v8_default_pins>; |
| 69 |
regulator-name = "vpp-1v8"; |
| 70 |
regulator-min-microvolt = <1800000>; |
| 71 |
regulator-max-microvolt = <1800000>; |
| 72 |
gpio = <&main_gpio1 78 GPIO_ACTIVE_HIGH>; |
| 73 |
enable-active-high; |
| 74 |
}; |
| 75 |
|
| 76 |
serdes_mux: mux-controller { |
| 77 |
compatible = "gpio-mux"; |
| 78 |
pinctrl-names = "default"; |
| 79 |
pinctrl-0 = <&serdes_mux_default_pins>; |
| 80 |
#mux-control-cells = <0>; |
| 81 |
/* |
| 82 |
* Mux has 2 IOs: |
| 83 |
* - select: 0 = USB-3 (M2); 1 = PCIE (M1) |
| 84 |
* - shutdown: 0 = active; 1 = disabled (high impedance) |
| 85 |
*/ |
| 86 |
mux-gpios = <&main_gpio1 40 GPIO_ACTIVE_HIGH>, <&main_gpio1 41 GPIO_ACTIVE_HIGH>; |
| 87 |
/* default disabled */ |
| 88 |
idle-state = <2>; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
&main_gpio0 { |
| 93 |
m2-reset-hog { |
| 94 |
gpio-hog; |
| 95 |
gpios = <12 GPIO_ACTIVE_LOW>; |
| 96 |
output-low; /* deasserted */ |
| 97 |
line-name = "m2-reset"; |
| 98 |
}; |
| 99 |
|
| 100 |
m1-m2-w-disable1-hog { |
| 101 |
gpio-hog; |
| 102 |
gpios = <32 GPIO_ACTIVE_LOW>; |
| 103 |
output-low; /* deasserted */ |
| 104 |
line-name = "m1-m2-pcie-w-disable1"; |
| 105 |
}; |
| 106 |
|
| 107 |
m1-m2-w-disable2-hog { |
| 108 |
gpio-hog; |
| 109 |
gpios = <34 GPIO_ACTIVE_LOW>; |
| 110 |
output-low; /* deasserted */ |
| 111 |
line-name = "m1-m2-pcie-w-disable2"; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
&main_gpio1 { |
| 116 |
m1-pcie-clkreq0-hog { |
| 117 |
gpio-hog; |
| 118 |
gpios = <11 GPIO_ACTIVE_LOW>; |
| 119 |
input; |
| 120 |
line-name = "m1-pcie-clkreq0"; |
| 121 |
}; |
| 122 |
|
| 123 |
m2-pcie-clkreq-hog { |
| 124 |
gpio-hog; |
| 125 |
gpios = <35 GPIO_ACTIVE_LOW>; |
| 126 |
input; |
| 127 |
line-name = "m2-pcie-clkreq"; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
&main_i2c0 { |
| 132 |
pinctrl-0 = <&main_i2c0_default_pins>, <&main_i2c0_int_default_pins>; |
| 133 |
|
| 134 |
humidity-sensor@41 { |
| 135 |
compatible = "ti,hdc2010"; |
| 136 |
reg = <0x41>; |
| 137 |
interrupt-parent = <&main_gpio0>; |
| 138 |
interrupts = <37 IRQ_TYPE_EDGE_FALLING>; |
| 139 |
}; |
| 140 |
|
| 141 |
light-sensor@44 { |
| 142 |
compatible = "ti,opt3001"; |
| 143 |
reg = <0x44>; |
| 144 |
interrupt-parent = <&main_gpio0>; |
| 145 |
interrupts = <37 IRQ_TYPE_EDGE_FALLING>; |
| 146 |
}; |
| 147 |
|
| 148 |
/* charger@6a */ |
| 149 |
}; |
| 150 |
|
| 151 |
&main_i2c1 { |
| 152 |
pinctrl-names = "default"; |
| 153 |
pinctrl-0 = <&main_i2c1_default_pins>; |
| 154 |
status = "okay"; |
| 155 |
|
| 156 |
rtc@69 { |
| 157 |
compatible = "abracon,abx80x"; |
| 158 |
reg = <0x69>; |
| 159 |
pinctrl-names = "default"; |
| 160 |
pinctrl-0 = <&rtc_int_default_pins>; |
| 161 |
abracon,tc-diode = "schottky"; |
| 162 |
abracon,tc-resistor = <3>; |
| 163 |
interrupt-parent = <&main_gpio0>; |
| 164 |
interrupts = <44 IRQ_TYPE_EDGE_FALLING>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&main_mcan0 { |
| 169 |
pinctrl-names = "default"; |
| 170 |
pinctrl-0 = <&main_mcan0_default_pins>; |
| 171 |
status = "okay"; |
| 172 |
|
| 173 |
can-transceiver { |
| 174 |
max-bitrate = <8000000>; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
&main_mcan1 { |
| 179 |
pinctrl-names = "default"; |
| 180 |
pinctrl-0 = <&main_mcan1_default_pins>; |
| 181 |
status = "okay"; |
| 182 |
|
| 183 |
can-transceiver { |
| 184 |
max-bitrate = <8000000>; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
&main_pmx0 { |
| 189 |
leds_default_pins: leds-default-pins { |
| 190 |
pinctrl-single,pins = < |
| 191 |
AM64X_IOPAD(0x0074, PIN_OUTPUT, 7) /* GPMC0_AD14.GPIO0_29 */ |
| 192 |
AM64X_IOPAD(0x0078, PIN_OUTPUT, 7) /* GPMC0_AD15.GPIO0_30 */ |
| 193 |
AM64X_IOPAD(0x0088, PIN_OUTPUT, 7) /* GPMC0_OEn_REn.GPIO0_33 */ |
| 194 |
>; |
| 195 |
}; |
| 196 |
|
| 197 |
main_i2c0_int_default_pins: main-i2c0-int-default-pins { |
| 198 |
pinctrl-single,pins = < |
| 199 |
/* external pull-up on Carrier */ |
| 200 |
AM64X_IOPAD(0x0098, PIN_INPUT, 7) /* GPMC0_WAIT0.GPIO0_37 */ |
| 201 |
>; |
| 202 |
}; |
| 203 |
|
| 204 |
main_i2c1_default_pins: main-i2c1-default-pins { |
| 205 |
pinctrl-single,pins = < |
| 206 |
/* external pull-up on SoM */ |
| 207 |
AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* I2C1_SCL.I2C1_SCL */ |
| 208 |
AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* I2C1_SDA.I2C1_SDA */ |
| 209 |
>; |
| 210 |
}; |
| 211 |
|
| 212 |
main_mcan0_default_pins: main-mcan0-default-pins { |
| 213 |
pinctrl-single,pins = < |
| 214 |
AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* MCAN0_RX.MCAN0_RX */ |
| 215 |
AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* MCAN0_TX.MCAN0_TX */ |
| 216 |
>; |
| 217 |
}; |
| 218 |
|
| 219 |
main_mcan1_default_pins: main-mcan1-default-pins { |
| 220 |
pinctrl-single,pins = < |
| 221 |
AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* MCAN1_RX.MCAN1_RX */ |
| 222 |
AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* MCAN1_TX.MCAN1_TX */ |
| 223 |
>; |
| 224 |
}; |
| 225 |
|
| 226 |
main_uart3_default_pins: main-uart3-default-pins { |
| 227 |
pinctrl-single,pins = < |
| 228 |
AM64X_IOPAD(0x016c, PIN_INPUT, 10) /* PRG0_PRU0_GPO3.UART3_CTSn */ |
| 229 |
AM64X_IOPAD(0x0170, PIN_OUTPUT, 10) /* PRG0_PRU0_GPO4.UART3_TXD */ |
| 230 |
AM64X_IOPAD(0x0174, PIN_OUTPUT, 10) /* PRG0_PRU0_GPO5.UART3_RTSn */ |
| 231 |
AM64X_IOPAD(0x01ac, PIN_INPUT, 10) /* PRG0_PRU0_GPO19.UART3_RXD */ |
| 232 |
>; |
| 233 |
}; |
| 234 |
|
| 235 |
pcie0_default_pins: pcie0-default-pins { |
| 236 |
pinctrl-single,pins = < |
| 237 |
/* connector M2 RESET */ |
| 238 |
AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* OSPI0_CSn1.GPIO0_12 */ |
| 239 |
/* connectors M1 & M2 W_DISABLE1 */ |
| 240 |
AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* GPMC0_ADVN_ALE.GPIO0_32 */ |
| 241 |
/* connectors M1 & M2 W_DISABLE2 */ |
| 242 |
AM64X_IOPAD(0x008c, PIN_OUTPUT, 7) /* GPMC0_WEN.GPIO0_34 */ |
| 243 |
/* connectors M1 & M2 PERST0 (PCI Reset) */ |
| 244 |
AM64X_IOPAD(0x019c, PIN_OUTPUT, 7) /* PRG0_PRU0_GPO15.GPIO1_15 */ |
| 245 |
/* connector M1 CLKREQ0 */ |
| 246 |
AM64X_IOPAD(0x018c, PIN_INPUT, 7) /* PRG0_PRU0_GPO11.GPIO1_11 */ |
| 247 |
/* connector M2 CLKREQ0 */ |
| 248 |
AM64X_IOPAD(0x01ec, PIN_INPUT, 7) /* PRG0_PRU1_GPO15.GPIO1_35 */ |
| 249 |
>; |
| 250 |
}; |
| 251 |
|
| 252 |
regulator_pcie_3v3_default_pins: regulator-pcie-3v3-default-pins { |
| 253 |
pinctrl-single,pins = < |
| 254 |
AM64X_IOPAD(0x01a4, PIN_OUTPUT, 7) /* PRG0_PRU0_GPO17.GPIO1_17 */ |
| 255 |
>; |
| 256 |
}; |
| 257 |
|
| 258 |
regulator_vpp_1v8_default_pins: regulator-vpp-1v8-default-pins { |
| 259 |
pinctrl-single,pins = < |
| 260 |
AM64X_IOPAD(0x029c, PIN_OUTPUT, 7) /* MMC1_SDWP.GPIO1_78 */ |
| 261 |
>; |
| 262 |
}; |
| 263 |
|
| 264 |
rtc_int_default_pins: rtc-int-default-pins { |
| 265 |
pinctrl-single,pins = < |
| 266 |
/* external pull-up on Carrier */ |
| 267 |
AM64X_IOPAD(0x00b4, PIN_INPUT, 7) /* GPMC0_CSn3.GPIO0_44 */ |
| 268 |
>; |
| 269 |
}; |
| 270 |
|
| 271 |
serdes_mux_default_pins: serdes-mux-default-pins { |
| 272 |
pinctrl-single,pins = < |
| 273 |
/* SEL, 10k pull-down on carrier, 2.2k pullup on SoM */ |
| 274 |
AM64X_IOPAD(0x0200, PIN_OUTPUT, 7) /* PRG0_MDIO0_MDIO.GPIO1_40 */ |
| 275 |
/* EN */ |
| 276 |
AM64X_IOPAD(0x0204, PIN_OUTPUT, 7) /* PRG0_MDIO0_MDC.GPIO1_41 */ |
| 277 |
>; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
&main_uart3 { |
| 282 |
pinctrl-names = "default"; |
| 283 |
pinctrl-0 = <&main_uart3_default_pins>; |
| 284 |
uart-has-rtscts; |
| 285 |
linux,rs485-enabled-at-boot-time; |
| 286 |
status = "okay"; |
| 287 |
}; |
| 288 |
|
| 289 |
&usb0 { |
| 290 |
dr_mode = "host"; |
| 291 |
}; |