| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/phy/phy.h> |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/net/ti-dp83867.h> |
| 12 |
#include "k3-am642.dtsi" |
| 13 |
|
| 14 |
#include "k3-serdes.h" |
| 15 |
|
| 16 |
/ { |
| 17 |
compatible = "ti,am642-evm", "ti,am642"; |
| 18 |
model = "Texas Instruments AM642 EVM"; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = &main_uart0; |
| 22 |
}; |
| 23 |
|
| 24 |
aliases { |
| 25 |
serial0 = &mcu_uart0; |
| 26 |
serial1 = &main_uart1; |
| 27 |
serial2 = &main_uart0; |
| 28 |
serial3 = &main_uart3; |
| 29 |
i2c0 = &main_i2c0; |
| 30 |
i2c1 = &main_i2c1; |
| 31 |
mmc0 = &sdhci0; |
| 32 |
mmc1 = &sdhci1; |
| 33 |
ethernet0 = &cpsw_port1; |
| 34 |
ethernet1 = &cpsw_port2; |
| 35 |
ethernet2 = &icssg1_emac0; |
| 36 |
}; |
| 37 |
|
| 38 |
memory@80000000 { |
| 39 |
bootph-all; |
| 40 |
device_type = "memory"; |
| 41 |
/* 2G RAM */ |
| 42 |
reg = <0x00000000 0x80000000 0x00000000 0x80000000>; |
| 43 |
}; |
| 44 |
|
| 45 |
reserved_memory: reserved-memory { |
| 46 |
#address-cells = <2>; |
| 47 |
#size-cells = <2>; |
| 48 |
ranges; |
| 49 |
|
| 50 |
secure_ddr: optee@9e800000 { |
| 51 |
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ |
| 52 |
alignment = <0x1000>; |
| 53 |
no-map; |
| 54 |
}; |
| 55 |
|
| 56 |
main_r5fss0_core0_dma_memory_region: memory@a0000000 { |
| 57 |
compatible = "shared-dma-pool"; |
| 58 |
reg = <0x00 0xa0000000 0x00 0x100000>; |
| 59 |
no-map; |
| 60 |
}; |
| 61 |
|
| 62 |
main_r5fss0_core0_memory_region: memory@a0100000 { |
| 63 |
compatible = "shared-dma-pool"; |
| 64 |
reg = <0x00 0xa0100000 0x00 0xf00000>; |
| 65 |
no-map; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
evm_12v0: regulator-0 { |
| 70 |
/* main DC jack */ |
| 71 |
bootph-all; |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-name = "evm_12v0"; |
| 74 |
regulator-min-microvolt = <12000000>; |
| 75 |
regulator-max-microvolt = <12000000>; |
| 76 |
regulator-always-on; |
| 77 |
regulator-boot-on; |
| 78 |
}; |
| 79 |
|
| 80 |
vsys_5v0: regulator-1 { |
| 81 |
/* output of LM5140 */ |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "vsys_5v0"; |
| 84 |
regulator-min-microvolt = <5000000>; |
| 85 |
regulator-max-microvolt = <5000000>; |
| 86 |
vin-supply = <&evm_12v0>; |
| 87 |
regulator-always-on; |
| 88 |
regulator-boot-on; |
| 89 |
}; |
| 90 |
|
| 91 |
vsys_3v3: regulator-2 { |
| 92 |
/* output of LM5140 */ |
| 93 |
bootph-all; |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
regulator-name = "vsys_3v3"; |
| 96 |
regulator-min-microvolt = <3300000>; |
| 97 |
regulator-max-microvolt = <3300000>; |
| 98 |
vin-supply = <&evm_12v0>; |
| 99 |
regulator-always-on; |
| 100 |
regulator-boot-on; |
| 101 |
}; |
| 102 |
|
| 103 |
vdd_mmc1: regulator-3 { |
| 104 |
/* TPS2051BD */ |
| 105 |
bootph-all; |
| 106 |
compatible = "regulator-fixed"; |
| 107 |
regulator-name = "vdd_mmc1"; |
| 108 |
regulator-min-microvolt = <3300000>; |
| 109 |
regulator-max-microvolt = <3300000>; |
| 110 |
regulator-boot-on; |
| 111 |
enable-active-high; |
| 112 |
vin-supply = <&vsys_3v3>; |
| 113 |
gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; |
| 114 |
}; |
| 115 |
|
| 116 |
vddb: regulator-4 { |
| 117 |
compatible = "regulator-fixed"; |
| 118 |
regulator-name = "vddb_3v3_display"; |
| 119 |
regulator-min-microvolt = <3300000>; |
| 120 |
regulator-max-microvolt = <3300000>; |
| 121 |
vin-supply = <&vsys_3v3>; |
| 122 |
regulator-always-on; |
| 123 |
regulator-boot-on; |
| 124 |
}; |
| 125 |
|
| 126 |
vtt_supply: regulator-5 { |
| 127 |
bootph-all; |
| 128 |
compatible = "regulator-fixed"; |
| 129 |
regulator-name = "vtt"; |
| 130 |
pinctrl-names = "default"; |
| 131 |
pinctrl-0 = <&ddr_vtt_pins_default>; |
| 132 |
regulator-min-microvolt = <3300000>; |
| 133 |
regulator-max-microvolt = <3300000>; |
| 134 |
gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; |
| 135 |
vin-supply = <&vsys_3v3>; |
| 136 |
enable-active-high; |
| 137 |
regulator-always-on; |
| 138 |
regulator-boot-on; |
| 139 |
}; |
| 140 |
|
| 141 |
leds { |
| 142 |
compatible = "gpio-leds"; |
| 143 |
|
| 144 |
led-0 { |
| 145 |
label = "am64-evm:red:heartbeat"; |
| 146 |
gpios = <&exp1 16 GPIO_ACTIVE_HIGH>; |
| 147 |
linux,default-trigger = "heartbeat"; |
| 148 |
function = LED_FUNCTION_HEARTBEAT; |
| 149 |
default-state = "off"; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
mdio_mux: mux-controller { |
| 154 |
compatible = "gpio-mux"; |
| 155 |
#mux-control-cells = <0>; |
| 156 |
|
| 157 |
mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; |
| 158 |
}; |
| 159 |
|
| 160 |
mdio_mux_1: mdio-mux-1 { |
| 161 |
compatible = "mdio-mux-multiplexer"; |
| 162 |
mux-controls = <&mdio_mux>; |
| 163 |
mdio-parent-bus = <&cpsw3g_mdio>; |
| 164 |
#address-cells = <1>; |
| 165 |
#size-cells = <0>; |
| 166 |
|
| 167 |
mdio@1 { |
| 168 |
reg = <0x1>; |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <0>; |
| 171 |
|
| 172 |
cpsw3g_phy3: ethernet-phy@3 { |
| 173 |
reg = <3>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
transceiver1: can-phy0 { |
| 179 |
compatible = "ti,tcan1042"; |
| 180 |
#phy-cells = <0>; |
| 181 |
max-bitrate = <5000000>; |
| 182 |
standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; |
| 183 |
}; |
| 184 |
|
| 185 |
transceiver2: can-phy1 { |
| 186 |
compatible = "ti,tcan1042"; |
| 187 |
#phy-cells = <0>; |
| 188 |
max-bitrate = <5000000>; |
| 189 |
standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; |
| 190 |
}; |
| 191 |
|
| 192 |
icssg1_eth: icssg1-eth { |
| 193 |
compatible = "ti,am642-icssg-prueth"; |
| 194 |
pinctrl-names = "default"; |
| 195 |
pinctrl-0 = <&icssg1_rgmii1_pins_default>; |
| 196 |
sram = <&oc_sram>; |
| 197 |
ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; |
| 198 |
firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf", |
| 199 |
"ti-pruss/am64x-sr2-rtu0-prueth-fw.elf", |
| 200 |
"ti-pruss/am64x-sr2-txpru0-prueth-fw.elf", |
| 201 |
"ti-pruss/am64x-sr2-pru1-prueth-fw.elf", |
| 202 |
"ti-pruss/am64x-sr2-rtu1-prueth-fw.elf", |
| 203 |
"ti-pruss/am64x-sr2-txpru1-prueth-fw.elf"; |
| 204 |
|
| 205 |
ti,pruss-gp-mux-sel = <2>, /* MII mode */ |
| 206 |
<2>, |
| 207 |
<2>, |
| 208 |
<2>, /* MII mode */ |
| 209 |
<2>, |
| 210 |
<2>; |
| 211 |
ti,mii-g-rt = <&icssg1_mii_g_rt>; |
| 212 |
ti,mii-rt = <&icssg1_mii_rt>; |
| 213 |
ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; |
| 214 |
ti,pa-stats = <&icssg1_pa_stats>; |
| 215 |
interrupt-parent = <&icssg1_intc>; |
| 216 |
interrupts = <24 0 2>, <25 1 3>; |
| 217 |
interrupt-names = "tx_ts0", "tx_ts1"; |
| 218 |
dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ |
| 219 |
<&main_pktdma 0xc201 15>, /* egress slice 0 */ |
| 220 |
<&main_pktdma 0xc202 15>, /* egress slice 0 */ |
| 221 |
<&main_pktdma 0xc203 15>, /* egress slice 0 */ |
| 222 |
<&main_pktdma 0xc204 15>, /* egress slice 1 */ |
| 223 |
<&main_pktdma 0xc205 15>, /* egress slice 1 */ |
| 224 |
<&main_pktdma 0xc206 15>, /* egress slice 1 */ |
| 225 |
<&main_pktdma 0xc207 15>, /* egress slice 1 */ |
| 226 |
<&main_pktdma 0x4200 15>, /* ingress slice 0 */ |
| 227 |
<&main_pktdma 0x4201 15>; /* ingress slice 1 */ |
| 228 |
dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", |
| 229 |
"tx1-0", "tx1-1", "tx1-2", "tx1-3", |
| 230 |
"rx0", "rx1"; |
| 231 |
|
| 232 |
ethernet-ports { |
| 233 |
#address-cells = <1>; |
| 234 |
#size-cells = <0>; |
| 235 |
icssg1_emac0: port@0 { |
| 236 |
reg = <0>; |
| 237 |
phy-handle = <&icssg1_phy1>; |
| 238 |
phy-mode = "rgmii-id"; |
| 239 |
/* Filled in by bootloader */ |
| 240 |
local-mac-address = [00 00 00 00 00 00]; |
| 241 |
}; |
| 242 |
icssg1_emac1: port@1 { |
| 243 |
reg = <1>; |
| 244 |
/* Filled in by bootloader */ |
| 245 |
local-mac-address = [00 00 00 00 00 00]; |
| 246 |
status = "disabled"; |
| 247 |
}; |
| 248 |
}; |
| 249 |
}; |
| 250 |
}; |
| 251 |
|
| 252 |
&main_pmx0 { |
| 253 |
main_mmc1_pins_default: main-mmc1-default-pins { |
| 254 |
pinctrl-single,pins = < |
| 255 |
AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ |
| 256 |
AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ |
| 257 |
AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ |
| 258 |
AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ |
| 259 |
AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ |
| 260 |
AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ |
| 261 |
AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ |
| 262 |
AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */ |
| 263 |
AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ |
| 264 |
>; |
| 265 |
}; |
| 266 |
|
| 267 |
main_uart1_pins_default: main-uart1-default-pins { |
| 268 |
pinctrl-single,pins = < |
| 269 |
AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ |
| 270 |
AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ |
| 271 |
AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ |
| 272 |
AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ |
| 273 |
>; |
| 274 |
}; |
| 275 |
|
| 276 |
main_uart0_pins_default: main-uart0-default-pins { |
| 277 |
bootph-all; |
| 278 |
pinctrl-single,pins = < |
| 279 |
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ |
| 280 |
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ |
| 281 |
AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ |
| 282 |
AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ |
| 283 |
>; |
| 284 |
}; |
| 285 |
|
| 286 |
main_spi0_pins_default: main-spi0-default-pins { |
| 287 |
pinctrl-single,pins = < |
| 288 |
AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ |
| 289 |
AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ |
| 290 |
AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ |
| 291 |
AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ |
| 292 |
>; |
| 293 |
}; |
| 294 |
|
| 295 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 296 |
bootph-all; |
| 297 |
pinctrl-single,pins = < |
| 298 |
AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ |
| 299 |
AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ |
| 300 |
>; |
| 301 |
}; |
| 302 |
|
| 303 |
main_i2c1_pins_default: main-i2c1-default-pins { |
| 304 |
bootph-all; |
| 305 |
pinctrl-single,pins = < |
| 306 |
AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ |
| 307 |
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ |
| 308 |
>; |
| 309 |
}; |
| 310 |
|
| 311 |
mdio1_pins_default: mdio1-default-pins { |
| 312 |
bootph-all; |
| 313 |
pinctrl-single,pins = < |
| 314 |
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ |
| 315 |
AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ |
| 316 |
>; |
| 317 |
}; |
| 318 |
|
| 319 |
rgmii1_pins_default: rgmii1-default-pins { |
| 320 |
bootph-all; |
| 321 |
pinctrl-single,pins = < |
| 322 |
AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ |
| 323 |
AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ |
| 324 |
AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ |
| 325 |
AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ |
| 326 |
AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ |
| 327 |
AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ |
| 328 |
AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ |
| 329 |
AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ |
| 330 |
AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ |
| 331 |
AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ |
| 332 |
AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ |
| 333 |
AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ |
| 334 |
>; |
| 335 |
}; |
| 336 |
|
| 337 |
rgmii2_pins_default: rgmii2-default-pins { |
| 338 |
bootph-all; |
| 339 |
pinctrl-single,pins = < |
| 340 |
AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ |
| 341 |
AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ |
| 342 |
AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ |
| 343 |
AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ |
| 344 |
AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ |
| 345 |
AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ |
| 346 |
AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ |
| 347 |
AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ |
| 348 |
AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ |
| 349 |
AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ |
| 350 |
AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ |
| 351 |
AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ |
| 352 |
>; |
| 353 |
}; |
| 354 |
|
| 355 |
main_usb0_pins_default: main-usb0-default-pins { |
| 356 |
bootph-all; |
| 357 |
pinctrl-single,pins = < |
| 358 |
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ |
| 359 |
>; |
| 360 |
}; |
| 361 |
|
| 362 |
ospi0_pins_default: ospi0-default-pins { |
| 363 |
pinctrl-single,pins = < |
| 364 |
AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ |
| 365 |
AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ |
| 366 |
AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ |
| 367 |
AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ |
| 368 |
AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ |
| 369 |
AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ |
| 370 |
AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ |
| 371 |
AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ |
| 372 |
AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ |
| 373 |
AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ |
| 374 |
AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ |
| 375 |
>; |
| 376 |
}; |
| 377 |
|
| 378 |
main_ecap0_pins_default: main-ecap0-default-pins { |
| 379 |
pinctrl-single,pins = < |
| 380 |
AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ |
| 381 |
>; |
| 382 |
}; |
| 383 |
|
| 384 |
main_mcan0_pins_default: main-mcan0-default-pins { |
| 385 |
pinctrl-single,pins = < |
| 386 |
AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ |
| 387 |
AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ |
| 388 |
>; |
| 389 |
}; |
| 390 |
|
| 391 |
main_mcan1_pins_default: main-mcan1-default-pins { |
| 392 |
pinctrl-single,pins = < |
| 393 |
AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ |
| 394 |
AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ |
| 395 |
>; |
| 396 |
}; |
| 397 |
|
| 398 |
ddr_vtt_pins_default: ddr-vtt-default-pins { |
| 399 |
bootph-all; |
| 400 |
pinctrl-single,pins = < |
| 401 |
AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ |
| 402 |
>; |
| 403 |
}; |
| 404 |
|
| 405 |
icssg1_mdio1_pins_default: icssg1-mdio1-default-pins { |
| 406 |
pinctrl-single,pins = < |
| 407 |
AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */ |
| 408 |
AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */ |
| 409 |
>; |
| 410 |
}; |
| 411 |
|
| 412 |
icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins { |
| 413 |
pinctrl-single,pins = < |
| 414 |
AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */ |
| 415 |
AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */ |
| 416 |
AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */ |
| 417 |
AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */ |
| 418 |
AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */ |
| 419 |
AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */ |
| 420 |
AM64X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */ |
| 421 |
AM64X_IOPAD(0x00e8, PIN_INPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */ |
| 422 |
AM64X_IOPAD(0x00ec, PIN_INPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */ |
| 423 |
AM64X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */ |
| 424 |
AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */ |
| 425 |
AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */ |
| 426 |
>; |
| 427 |
}; |
| 428 |
|
| 429 |
icssg1_iep0_pins_default: icssg1-iep0-default-pins { |
| 430 |
pinctrl-single,pins = < |
| 431 |
AM64X_IOPAD(0x0104, PIN_OUTPUT, 2) /* (W7) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */ |
| 432 |
>; |
| 433 |
}; |
| 434 |
}; |
| 435 |
|
| 436 |
&main_uart0 { |
| 437 |
bootph-all; |
| 438 |
status = "okay"; |
| 439 |
pinctrl-names = "default"; |
| 440 |
pinctrl-0 = <&main_uart0_pins_default>; |
| 441 |
}; |
| 442 |
|
| 443 |
/* main_uart1 is reserved for firmware usage */ |
| 444 |
&main_uart1 { |
| 445 |
status = "reserved"; |
| 446 |
pinctrl-names = "default"; |
| 447 |
pinctrl-0 = <&main_uart1_pins_default>; |
| 448 |
}; |
| 449 |
|
| 450 |
&main_i2c0 { |
| 451 |
bootph-all; |
| 452 |
status = "okay"; |
| 453 |
pinctrl-names = "default"; |
| 454 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 455 |
clock-frequency = <400000>; |
| 456 |
|
| 457 |
gpio@38 { |
| 458 |
/* TCA9554 */ |
| 459 |
compatible = "nxp,pca9554"; |
| 460 |
reg = <0x38>; |
| 461 |
gpio-controller; |
| 462 |
#gpio-cells = <2>; |
| 463 |
gpio-line-names = "HSE_DETECT"; |
| 464 |
}; |
| 465 |
|
| 466 |
eeprom@50 { |
| 467 |
/* AT24CM01 */ |
| 468 |
compatible = "atmel,24c1024"; |
| 469 |
reg = <0x50>; |
| 470 |
}; |
| 471 |
}; |
| 472 |
|
| 473 |
&main_i2c1 { |
| 474 |
bootph-all; |
| 475 |
status = "okay"; |
| 476 |
pinctrl-names = "default"; |
| 477 |
pinctrl-0 = <&main_i2c1_pins_default>; |
| 478 |
clock-frequency = <400000>; |
| 479 |
|
| 480 |
exp1: gpio@22 { |
| 481 |
bootph-all; |
| 482 |
compatible = "ti,tca6424"; |
| 483 |
reg = <0x22>; |
| 484 |
gpio-controller; |
| 485 |
#gpio-cells = <2>; |
| 486 |
gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL", |
| 487 |
"GPIO_CPSW1_RST", "GPIO_RGMII1_RST", |
| 488 |
"GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT", |
| 489 |
"MMC1_SD_EN", "FSI_FET_SEL", |
| 490 |
"MCAN0_STB_3V3", "MCAN1_STB_3V3", |
| 491 |
"CPSW_FET_SEL", "CPSW_FET2_SEL", |
| 492 |
"PRG1_RGMII2_FET_SEL", "TEST_GPIO2", |
| 493 |
"GPIO_OLED_RESETn", "VPP_LDO_EN", |
| 494 |
"TEST_LED1", "TP92", "TP90", "TP88", |
| 495 |
"TP87", "TP86", "TP89", "TP91"; |
| 496 |
}; |
| 497 |
|
| 498 |
/* osd9616p0899-10 */ |
| 499 |
display@3c { |
| 500 |
compatible = "solomon,ssd1306fb-i2c"; |
| 501 |
reg = <0x3c>; |
| 502 |
reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>; |
| 503 |
vbat-supply = <&vddb>; |
| 504 |
solomon,height = <16>; |
| 505 |
solomon,width = <96>; |
| 506 |
solomon,com-seq; |
| 507 |
solomon,com-invdir; |
| 508 |
solomon,page-offset = <0>; |
| 509 |
solomon,prechargep1 = <2>; |
| 510 |
solomon,prechargep2 = <13>; |
| 511 |
}; |
| 512 |
}; |
| 513 |
|
| 514 |
&main_gpio0 { |
| 515 |
bootph-all; |
| 516 |
}; |
| 517 |
|
| 518 |
/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ |
| 519 |
&mcu_gpio0 { |
| 520 |
status = "reserved"; |
| 521 |
}; |
| 522 |
|
| 523 |
&mcu_gpio_intr { |
| 524 |
status = "reserved"; |
| 525 |
}; |
| 526 |
|
| 527 |
&main_spi0 { |
| 528 |
status = "okay"; |
| 529 |
pinctrl-names = "default"; |
| 530 |
pinctrl-0 = <&main_spi0_pins_default>; |
| 531 |
ti,pindir-d0-out-d1-in; |
| 532 |
eeprom@0 { |
| 533 |
compatible = "microchip,93lc46b"; |
| 534 |
reg = <0>; |
| 535 |
spi-max-frequency = <1000000>; |
| 536 |
spi-cs-high; |
| 537 |
data-size = <16>; |
| 538 |
}; |
| 539 |
}; |
| 540 |
|
| 541 |
/* eMMC */ |
| 542 |
&sdhci0 { |
| 543 |
status = "okay"; |
| 544 |
non-removable; |
| 545 |
ti,driver-strength-ohm = <50>; |
| 546 |
bootph-all; |
| 547 |
}; |
| 548 |
|
| 549 |
/* SD/MMC */ |
| 550 |
&sdhci1 { |
| 551 |
bootph-all; |
| 552 |
status = "okay"; |
| 553 |
vmmc-supply = <&vdd_mmc1>; |
| 554 |
pinctrl-names = "default"; |
| 555 |
pinctrl-0 = <&main_mmc1_pins_default>; |
| 556 |
disable-wp; |
| 557 |
}; |
| 558 |
|
| 559 |
&usbss0 { |
| 560 |
bootph-all; |
| 561 |
ti,vbus-divider; |
| 562 |
ti,usb2-only; |
| 563 |
}; |
| 564 |
|
| 565 |
&usb0 { |
| 566 |
bootph-all; |
| 567 |
dr_mode = "otg"; |
| 568 |
maximum-speed = "high-speed"; |
| 569 |
pinctrl-names = "default"; |
| 570 |
pinctrl-0 = <&main_usb0_pins_default>; |
| 571 |
}; |
| 572 |
|
| 573 |
&cpsw3g { |
| 574 |
bootph-all; |
| 575 |
pinctrl-names = "default"; |
| 576 |
pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; |
| 577 |
status = "okay"; |
| 578 |
}; |
| 579 |
|
| 580 |
&cpsw_port1 { |
| 581 |
bootph-all; |
| 582 |
phy-mode = "rgmii-id"; |
| 583 |
phy-handle = <&cpsw3g_phy0>; |
| 584 |
status = "okay"; |
| 585 |
}; |
| 586 |
|
| 587 |
&cpsw_port2 { |
| 588 |
phy-mode = "rgmii-id"; |
| 589 |
phy-handle = <&cpsw3g_phy3>; |
| 590 |
status = "okay"; |
| 591 |
}; |
| 592 |
|
| 593 |
&cpsw3g_mdio { |
| 594 |
bootph-all; |
| 595 |
status = "okay"; |
| 596 |
pinctrl-names = "default"; |
| 597 |
pinctrl-0 = <&mdio1_pins_default>; |
| 598 |
|
| 599 |
cpsw3g_phy0: ethernet-phy@0 { |
| 600 |
bootph-all; |
| 601 |
reg = <0>; |
| 602 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 603 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 604 |
}; |
| 605 |
}; |
| 606 |
|
| 607 |
&tscadc0 { |
| 608 |
/* ADC is reserved for R5 usage */ |
| 609 |
status = "reserved"; |
| 610 |
|
| 611 |
dmas = <&main_bcdma 0 0x440f 0>, <&main_bcdma 0 0x4410 0>; |
| 612 |
dma-names = "fifo0", "fifo1"; |
| 613 |
|
| 614 |
adc { |
| 615 |
ti,adc-channels = <0 1 2 3 4 5 6 7>; |
| 616 |
}; |
| 617 |
}; |
| 618 |
|
| 619 |
&ospi0 { |
| 620 |
status = "okay"; |
| 621 |
pinctrl-names = "default"; |
| 622 |
pinctrl-0 = <&ospi0_pins_default>; |
| 623 |
|
| 624 |
flash@0 { |
| 625 |
compatible = "jedec,spi-nor"; |
| 626 |
reg = <0x0>; |
| 627 |
spi-tx-bus-width = <8>; |
| 628 |
spi-rx-bus-width = <8>; |
| 629 |
spi-max-frequency = <25000000>; |
| 630 |
cdns,tshsl-ns = <60>; |
| 631 |
cdns,tsd2d-ns = <60>; |
| 632 |
cdns,tchsh-ns = <60>; |
| 633 |
cdns,tslch-ns = <60>; |
| 634 |
cdns,read-delay = <4>; |
| 635 |
|
| 636 |
partitions { |
| 637 |
compatible = "fixed-partitions"; |
| 638 |
#address-cells = <1>; |
| 639 |
#size-cells = <1>; |
| 640 |
|
| 641 |
partition@0 { |
| 642 |
label = "ospi.tiboot3"; |
| 643 |
reg = <0x0 0x100000>; |
| 644 |
}; |
| 645 |
|
| 646 |
partition@100000 { |
| 647 |
label = "ospi.tispl"; |
| 648 |
reg = <0x100000 0x200000>; |
| 649 |
}; |
| 650 |
|
| 651 |
partition@300000 { |
| 652 |
label = "ospi.u-boot"; |
| 653 |
reg = <0x300000 0x400000>; |
| 654 |
}; |
| 655 |
|
| 656 |
partition@700000 { |
| 657 |
label = "ospi.env"; |
| 658 |
reg = <0x700000 0x40000>; |
| 659 |
}; |
| 660 |
|
| 661 |
partition@740000 { |
| 662 |
label = "ospi.env.backup"; |
| 663 |
reg = <0x740000 0x40000>; |
| 664 |
}; |
| 665 |
|
| 666 |
partition@800000 { |
| 667 |
label = "ospi.rootfs"; |
| 668 |
reg = <0x800000 0x37c0000>; |
| 669 |
}; |
| 670 |
|
| 671 |
partition@3fc0000 { |
| 672 |
label = "ospi.phypattern"; |
| 673 |
reg = <0x3fc0000 0x40000>; |
| 674 |
}; |
| 675 |
}; |
| 676 |
}; |
| 677 |
}; |
| 678 |
|
| 679 |
&serdes_ln_ctrl { |
| 680 |
idle-states = <AM64_SERDES0_LANE0_PCIE0>; |
| 681 |
}; |
| 682 |
|
| 683 |
&serdes0 { |
| 684 |
serdes0_pcie_link: phy@0 { |
| 685 |
reg = <0>; |
| 686 |
cdns,num-lanes = <1>; |
| 687 |
#phy-cells = <0>; |
| 688 |
cdns,phy-type = <PHY_TYPE_PCIE>; |
| 689 |
resets = <&serdes_wiz0 1>; |
| 690 |
}; |
| 691 |
}; |
| 692 |
|
| 693 |
&pcie0_rc { |
| 694 |
status = "okay"; |
| 695 |
reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; |
| 696 |
phys = <&serdes0_pcie_link>; |
| 697 |
phy-names = "pcie-phy"; |
| 698 |
num-lanes = <1>; |
| 699 |
}; |
| 700 |
|
| 701 |
&ecap0 { |
| 702 |
status = "okay"; |
| 703 |
/* PWM is available on Pin 1 of header J12 */ |
| 704 |
pinctrl-names = "default"; |
| 705 |
pinctrl-0 = <&main_ecap0_pins_default>; |
| 706 |
}; |
| 707 |
|
| 708 |
&main_mcan0 { |
| 709 |
status = "okay"; |
| 710 |
pinctrl-names = "default"; |
| 711 |
pinctrl-0 = <&main_mcan0_pins_default>; |
| 712 |
phys = <&transceiver1>; |
| 713 |
}; |
| 714 |
|
| 715 |
&main_mcan1 { |
| 716 |
status = "okay"; |
| 717 |
pinctrl-names = "default"; |
| 718 |
pinctrl-0 = <&main_mcan1_pins_default>; |
| 719 |
phys = <&transceiver2>; |
| 720 |
}; |
| 721 |
|
| 722 |
&icssg1_mdio { |
| 723 |
status = "okay"; |
| 724 |
pinctrl-names = "default"; |
| 725 |
pinctrl-0 = <&icssg1_mdio1_pins_default>; |
| 726 |
|
| 727 |
icssg1_phy1: ethernet-phy@f { |
| 728 |
reg = <0xf>; |
| 729 |
tx-internal-delay-ps = <250>; |
| 730 |
rx-internal-delay-ps = <2000>; |
| 731 |
}; |
| 732 |
}; |
| 733 |
|
| 734 |
&gpmc0 { |
| 735 |
ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ |
| 736 |
}; |
| 737 |
|
| 738 |
&icssg1_iep0 { |
| 739 |
pinctrl-names = "default"; |
| 740 |
pinctrl-0 = <&icssg1_iep0_pins_default>; |
| 741 |
}; |
| 742 |
|
| 743 |
#include "k3-am64-ti-ipc-firmware.dtsi" |