| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/** |
| 3 |
* DT overlay for HSE NAND expansion card on AM642 EVM |
| 4 |
* |
| 5 |
* Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
/plugin/; |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include "k3-pinctrl.h" |
| 13 |
|
| 14 |
&main_pmx0 { |
| 15 |
gpmc0_default_pins: gpmc0-default-pins { |
| 16 |
bootph-all; |
| 17 |
pinctrl-single,pins = < |
| 18 |
AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */ |
| 19 |
AM64X_IOPAD(0x003c, PIN_INPUT, 0) /* (T20) GPMC0_AD0 */ |
| 20 |
AM64X_IOPAD(0x0040, PIN_INPUT, 0) /* (U21) GPMC0_AD1 */ |
| 21 |
AM64X_IOPAD(0x0064, PIN_INPUT, 0) /* (R16) GPMC0_AD10 */ |
| 22 |
AM64X_IOPAD(0x0068, PIN_INPUT, 0) /* (W20) GPMC0_AD11 */ |
| 23 |
AM64X_IOPAD(0x006c, PIN_INPUT, 0) /* (W21) GPMC0_AD12 */ |
| 24 |
AM64X_IOPAD(0x0070, PIN_INPUT, 0) /* (V18) GPMC0_AD13 */ |
| 25 |
AM64X_IOPAD(0x0074, PIN_INPUT, 0) /* (Y21) GPMC0_AD14 */ |
| 26 |
AM64X_IOPAD(0x0078, PIN_INPUT, 0) /* (Y20) GPMC0_AD15 */ |
| 27 |
AM64X_IOPAD(0x0044, PIN_INPUT, 0) /* (T18) GPMC0_AD2 */ |
| 28 |
AM64X_IOPAD(0x0048, PIN_INPUT, 0) /* (U20) GPMC0_AD3 */ |
| 29 |
AM64X_IOPAD(0x004c, PIN_INPUT, 0) /* (U18) GPMC0_AD4 */ |
| 30 |
AM64X_IOPAD(0x0050, PIN_INPUT, 0) /* (U19) GPMC0_AD5 */ |
| 31 |
AM64X_IOPAD(0x0054, PIN_INPUT, 0) /* (V20) GPMC0_AD6 */ |
| 32 |
AM64X_IOPAD(0x0058, PIN_INPUT, 0) /* (V21) GPMC0_AD7 */ |
| 33 |
AM64X_IOPAD(0x005c, PIN_INPUT, 0) /* (V19) GPMC0_AD8 */ |
| 34 |
AM64X_IOPAD(0x0060, PIN_INPUT, 0) /* (T17) GPMC0_AD9 */ |
| 35 |
AM64X_IOPAD(0x0098, PIN_INPUT_PULLUP, 0) /* (W19) GPMC0_WAIT0 */ |
| 36 |
AM64X_IOPAD(0x009c, PIN_INPUT_PULLUP, 0) /* (Y18) GPMC0_WAIT1 */ |
| 37 |
AM64X_IOPAD(0x00a8, PIN_OUTPUT_PULLUP, 0) /* (R19) GPMC0_CSn0 */ |
| 38 |
AM64X_IOPAD(0x00ac, PIN_OUTPUT_PULLUP, 0) /* (R20) GPMC0_CSn1 */ |
| 39 |
AM64X_IOPAD(0x00b0, PIN_OUTPUT_PULLUP, 0) /* (P19) GPMC0_CSn2 */ |
| 40 |
AM64X_IOPAD(0x00b4, PIN_OUTPUT_PULLUP, 0) /* (R21) GPMC0_CSn3 */ |
| 41 |
AM64X_IOPAD(0x007c, PIN_OUTPUT, 0) /* (R17) GPMC0_CLK */ |
| 42 |
AM64X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (P16) GPMC0_ADVn_ALE */ |
| 43 |
AM64X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (R18) GPMC0_OEn_REn */ |
| 44 |
AM64X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (T21) GPMC0_WEn */ |
| 45 |
AM64X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (P17) GPMC0_BE0n_CLE */ |
| 46 |
AM64X_IOPAD(0x00a0, PIN_OUTPUT_PULLUP, 0) /* (N16) GPMC0_WPn */ |
| 47 |
AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */ |
| 48 |
>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
&main_gpio0 { |
| 53 |
gpmc0-hog { |
| 54 |
bootph-all; |
| 55 |
gpio-hog; |
| 56 |
gpios = <36 0>; |
| 57 |
input; |
| 58 |
line-name = "GPMC0_MUX_DIR"; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
&elm0 { |
| 63 |
bootph-all; |
| 64 |
status = "okay"; |
| 65 |
}; |
| 66 |
|
| 67 |
&gpmc0 { |
| 68 |
status = "okay"; |
| 69 |
pinctrl-names = "default"; |
| 70 |
pinctrl-0 = <&gpmc0_default_pins>; |
| 71 |
#address-cells = <2>; |
| 72 |
#size-cells = <1>; |
| 73 |
|
| 74 |
nand@0,0 { |
| 75 |
compatible = "ti,am64-nand"; |
| 76 |
reg = <0 0 64>; /* device IO registers */ |
| 77 |
interrupt-parent = <&gpmc0>; |
| 78 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 79 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 80 |
rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ |
| 81 |
ti,nand-xfer-type = "prefetch-polled"; |
| 82 |
ti,nand-ecc-opt = "bch8"; /* BCH8: Bootrom limitation */ |
| 83 |
ti,elm-id = <&elm0>; |
| 84 |
nand-bus-width = <8>; |
| 85 |
gpmc,device-width = <1>; |
| 86 |
gpmc,sync-clk-ps = <0>; |
| 87 |
gpmc,cs-on-ns = <0>; |
| 88 |
gpmc,cs-rd-off-ns = <40>; |
| 89 |
gpmc,cs-wr-off-ns = <40>; |
| 90 |
gpmc,adv-on-ns = <0>; |
| 91 |
gpmc,adv-rd-off-ns = <25>; |
| 92 |
gpmc,adv-wr-off-ns = <25>; |
| 93 |
gpmc,we-on-ns = <0>; |
| 94 |
gpmc,we-off-ns = <20>; |
| 95 |
gpmc,oe-on-ns = <3>; |
| 96 |
gpmc,oe-off-ns = <30>; |
| 97 |
gpmc,access-ns = <30>; |
| 98 |
gpmc,rd-cycle-ns = <40>; |
| 99 |
gpmc,wr-cycle-ns = <40>; |
| 100 |
gpmc,bus-turnaround-ns = <0>; |
| 101 |
gpmc,cycle2cycle-delay-ns = <0>; |
| 102 |
gpmc,clk-activation-ns = <0>; |
| 103 |
gpmc,wr-access-ns = <40>; |
| 104 |
gpmc,wr-data-mux-bus-ns = <0>; |
| 105 |
|
| 106 |
partitions { |
| 107 |
compatible = "fixed-partitions"; |
| 108 |
#address-cells = <1>; |
| 109 |
#size-cells = <1>; |
| 110 |
|
| 111 |
partition@0 { |
| 112 |
bootph-all; |
| 113 |
label = "NAND.tiboot3"; |
| 114 |
reg = <0x00000000 0x00200000>; /* 2M */ |
| 115 |
}; |
| 116 |
partition@200000 { |
| 117 |
bootph-all; |
| 118 |
label = "NAND.tispl"; |
| 119 |
reg = <0x00200000 0x00200000>; /* 2M */ |
| 120 |
}; |
| 121 |
partition@400000 { |
| 122 |
bootph-all; |
| 123 |
label = "NAND.tiboot3.backup"; /* 2M */ |
| 124 |
reg = <0x00400000 0x00200000>; /* BootROM looks at 4M */ |
| 125 |
}; |
| 126 |
partition@600000 { |
| 127 |
bootph-all; |
| 128 |
label = "NAND.u-boot"; |
| 129 |
reg = <0x00600000 0x00400000>; /* 4M */ |
| 130 |
}; |
| 131 |
partition@a00000 { |
| 132 |
bootph-all; |
| 133 |
label = "NAND.u-boot-env"; |
| 134 |
reg = <0x00a00000 0x00040000>; /* 256K */ |
| 135 |
}; |
| 136 |
partition@a40000 { |
| 137 |
bootph-all; |
| 138 |
label = "NAND.u-boot-env.backup"; |
| 139 |
reg = <0x00a40000 0x00040000>; /* 256K */ |
| 140 |
}; |
| 141 |
partition@a80000 { |
| 142 |
bootph-all; |
| 143 |
label = "NAND.file-system"; |
| 144 |
reg = <0x00a80000 0x3f580000>; |
| 145 |
}; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |