| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com |
| 4 |
* Author: Matt McKee <[email protected]> |
| 5 |
* |
| 6 |
* Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH |
| 7 |
* Author: Wadim Egorov <[email protected]> |
| 8 |
* |
| 9 |
* Product homepage: |
| 10 |
* https://www.phytec.com/product/phycore-am64x |
| 11 |
*/ |
| 12 |
|
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
#include <dt-bindings/net/ti-dp83867.h> |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "PHYTEC phyCORE-AM64x"; |
| 19 |
compatible = "phytec,am64-phycore-som", "ti,am642"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
ethernet0 = &cpsw_port1; |
| 23 |
mmc0 = &sdhci0; |
| 24 |
rtc0 = &i2c_som_rtc; |
| 25 |
}; |
| 26 |
|
| 27 |
memory@80000000 { |
| 28 |
device_type = "memory"; |
| 29 |
reg = <0x00000000 0x80000000 0x00000000 0x80000000>; |
| 30 |
bootph-all; |
| 31 |
}; |
| 32 |
|
| 33 |
reserved_memory: reserved-memory { |
| 34 |
#address-cells = <2>; |
| 35 |
#size-cells = <2>; |
| 36 |
ranges; |
| 37 |
|
| 38 |
secure_ddr: optee@9e800000 { |
| 39 |
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ |
| 40 |
alignment = <0x1000>; |
| 41 |
no-map; |
| 42 |
}; |
| 43 |
|
| 44 |
main_r5fss0_core0_dma_memory_region: memory@a0000000 { |
| 45 |
compatible = "shared-dma-pool"; |
| 46 |
reg = <0x00 0xa0000000 0x00 0x100000>; |
| 47 |
no-map; |
| 48 |
}; |
| 49 |
|
| 50 |
main_r5fss0_core0_memory_region: memory@a0100000 { |
| 51 |
compatible = "shared-dma-pool"; |
| 52 |
reg = <0x00 0xa0100000 0x00 0xf00000>; |
| 53 |
no-map; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
leds { |
| 58 |
compatible = "gpio-leds"; |
| 59 |
pinctrl-names = "default"; |
| 60 |
pinctrl-0 = <&leds_pins_default>; |
| 61 |
|
| 62 |
led-0 { |
| 63 |
color = <LED_COLOR_ID_GREEN>; |
| 64 |
gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; |
| 65 |
linux,default-trigger = "heartbeat"; |
| 66 |
function = LED_FUNCTION_HEARTBEAT; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
vcc_5v0_som: regulator-vcc-5v0-som { |
| 71 |
/* VIN / VCC_5V0_SOM */ |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-name = "VCC_5V0_SOM"; |
| 74 |
regulator-min-microvolt = <5000000>; |
| 75 |
regulator-max-microvolt = <5000000>; |
| 76 |
regulator-always-on; |
| 77 |
regulator-boot-on; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
&main_pmx0 { |
| 82 |
cpsw_mdio_pins_default: cpsw-mdio-default-pins { |
| 83 |
pinctrl-single,pins = < |
| 84 |
AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ |
| 85 |
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ |
| 86 |
AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */ |
| 87 |
>; |
| 88 |
bootph-all; |
| 89 |
}; |
| 90 |
|
| 91 |
cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins { |
| 92 |
pinctrl-single,pins = < |
| 93 |
AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ |
| 94 |
AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ |
| 95 |
AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ |
| 96 |
AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ |
| 97 |
AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ |
| 98 |
AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ |
| 99 |
AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ |
| 100 |
AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ |
| 101 |
AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ |
| 102 |
AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ |
| 103 |
AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ |
| 104 |
AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ |
| 105 |
AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */ |
| 106 |
>; |
| 107 |
bootph-all; |
| 108 |
}; |
| 109 |
|
| 110 |
eeprom_wp_pins_default: eeprom-wp-default-pins { |
| 111 |
pinctrl-single,pins = < |
| 112 |
AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */ |
| 113 |
>; |
| 114 |
}; |
| 115 |
|
| 116 |
leds_pins_default: leds-default-pins { |
| 117 |
pinctrl-single,pins = < |
| 118 |
AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */ |
| 119 |
>; |
| 120 |
}; |
| 121 |
|
| 122 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 123 |
pinctrl-single,pins = < |
| 124 |
AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ |
| 125 |
AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ |
| 126 |
>; |
| 127 |
bootph-all; |
| 128 |
}; |
| 129 |
|
| 130 |
ospi0_pins_default: ospi0-default-pins { |
| 131 |
pinctrl-single,pins = < |
| 132 |
AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ |
| 133 |
AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ |
| 134 |
AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ |
| 135 |
AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ |
| 136 |
AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ |
| 137 |
AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ |
| 138 |
AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ |
| 139 |
AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ |
| 140 |
AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ |
| 141 |
AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ |
| 142 |
AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ |
| 143 |
>; |
| 144 |
bootph-all; |
| 145 |
}; |
| 146 |
|
| 147 |
rtc_pins_default: rtc-defaults-pins { |
| 148 |
pinctrl-single,pins = < |
| 149 |
AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* (C19) EXTINTn.GPIO1_70 */ |
| 150 |
>; |
| 151 |
}; |
| 152 |
}; |
| 153 |
|
| 154 |
&cpsw3g { |
| 155 |
pinctrl-names = "default"; |
| 156 |
pinctrl-0 = <&cpsw_rgmii1_pins_default>; |
| 157 |
status = "okay"; |
| 158 |
}; |
| 159 |
|
| 160 |
&cpsw3g_mdio { |
| 161 |
pinctrl-names = "default"; |
| 162 |
pinctrl-0 = <&cpsw_mdio_pins_default>; |
| 163 |
bootph-all; |
| 164 |
status = "okay"; |
| 165 |
|
| 166 |
cpsw3g_phy1: ethernet-phy@1 { |
| 167 |
compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; |
| 168 |
reg = <1>; |
| 169 |
interrupt-parent = <&main_gpio0>; |
| 170 |
interrupts = <84 IRQ_TYPE_EDGE_FALLING>; |
| 171 |
reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>; |
| 172 |
reset-assert-us = <1000>; |
| 173 |
reset-deassert-us = <1000>; |
| 174 |
bootph-all; |
| 175 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 176 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
&cpsw_port1 { |
| 181 |
phy-mode = "rgmii-id"; |
| 182 |
phy-handle = <&cpsw3g_phy1>; |
| 183 |
bootph-all; |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
&main_i2c0 { |
| 188 |
pinctrl-names = "default"; |
| 189 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 190 |
clock-frequency = <400000>; |
| 191 |
bootph-all; |
| 192 |
status = "okay"; |
| 193 |
|
| 194 |
eeprom@50 { |
| 195 |
compatible = "atmel,24c32"; |
| 196 |
pinctrl-names = "default"; |
| 197 |
pinctrl-0 = <&eeprom_wp_pins_default>; |
| 198 |
pagesize = <32>; |
| 199 |
reg = <0x50>; |
| 200 |
}; |
| 201 |
|
| 202 |
i2c_som_rtc: rtc@52 { |
| 203 |
compatible = "microcrystal,rv3028"; |
| 204 |
reg = <0x52>; |
| 205 |
pinctrl-names = "default"; |
| 206 |
pinctrl-0 = <&rtc_pins_default>; |
| 207 |
interrupt-parent = <&main_gpio1>; |
| 208 |
interrupts = <70 IRQ_TYPE_EDGE_FALLING>; |
| 209 |
wakeup-source; |
| 210 |
}; |
| 211 |
|
| 212 |
pmic@61 { |
| 213 |
compatible = "ti,lp8733"; |
| 214 |
reg = <0x61>; |
| 215 |
|
| 216 |
buck0-in-supply = <&vcc_5v0_som>; |
| 217 |
buck1-in-supply = <&vcc_5v0_som>; |
| 218 |
ldo0-in-supply = <&vdd_3v3>; |
| 219 |
ldo1-in-supply = <&vdd_3v3>; |
| 220 |
|
| 221 |
regulators { |
| 222 |
vdd_core: buck0 { |
| 223 |
regulator-name = "VDD_CORE"; |
| 224 |
regulator-min-microvolt = <750000>; |
| 225 |
regulator-max-microvolt = <750000>; |
| 226 |
regulator-always-on; |
| 227 |
regulator-boot-on; |
| 228 |
}; |
| 229 |
|
| 230 |
vdd_3v3: buck1 { |
| 231 |
regulator-name = "VDD_3V3"; |
| 232 |
regulator-min-microvolt = <3300000>; |
| 233 |
regulator-max-microvolt = <3300000>; |
| 234 |
regulator-always-on; |
| 235 |
regulator-boot-on; |
| 236 |
}; |
| 237 |
|
| 238 |
vdd_1v8_ldo0: ldo0 { |
| 239 |
regulator-name = "VDD_1V8_LDO0"; |
| 240 |
regulator-min-microvolt = <1800000>; |
| 241 |
regulator-max-microvolt = <1800000>; |
| 242 |
regulator-always-on; |
| 243 |
regulator-boot-on; |
| 244 |
}; |
| 245 |
|
| 246 |
vdda_1v8: ldo1 { |
| 247 |
regulator-name = "VDDA_1V8"; |
| 248 |
regulator-min-microvolt = <1800000>; |
| 249 |
regulator-max-microvolt = <1800000>; |
| 250 |
regulator-always-on; |
| 251 |
regulator-boot-on; |
| 252 |
}; |
| 253 |
}; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
&main_pktdma { |
| 258 |
bootph-all; |
| 259 |
}; |
| 260 |
|
| 261 |
&ospi0 { |
| 262 |
pinctrl-names = "default"; |
| 263 |
pinctrl-0 = <&ospi0_pins_default>; |
| 264 |
status = "okay"; |
| 265 |
|
| 266 |
serial_flash: flash@0 { |
| 267 |
compatible = "jedec,spi-nor"; |
| 268 |
reg = <0x0>; |
| 269 |
spi-tx-bus-width = <8>; |
| 270 |
spi-rx-bus-width = <8>; |
| 271 |
spi-max-frequency = <25000000>; |
| 272 |
cdns,tshsl-ns = <60>; |
| 273 |
cdns,tsd2d-ns = <60>; |
| 274 |
cdns,tchsh-ns = <60>; |
| 275 |
cdns,tslch-ns = <60>; |
| 276 |
cdns,read-delay = <0>; |
| 277 |
bootph-all; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
&sdhci0 { |
| 282 |
non-removable; |
| 283 |
ti,driver-strength-ohm = <50>; |
| 284 |
disable-wp; |
| 285 |
keep-power-in-suspend; |
| 286 |
bootph-all; |
| 287 |
status = "okay"; |
| 288 |
}; |
| 289 |
|
| 290 |
&tscadc0 { |
| 291 |
status = "okay"; |
| 292 |
adc { |
| 293 |
ti,adc-channels = <0 1 2 3 4 5 6 7>; |
| 294 |
}; |
| 295 |
}; |
| 296 |
|
| 297 |
#include "k3-am64-ti-ipc-firmware.dtsi" |