Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am62x-phyboard-lyra.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
4 * Author: Wadim Egorov <[email protected]>
5 *
6 */
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/net/ti-dp83867.h>
12
13 / {
14 aliases {
15 serial2 = &main_uart0;
16 serial3 = &main_uart1;
17 mmc1 = &sdhci1;
18 usb0 = &usb0;
19 usb1 = &usb1;
20 ethernet1 = &cpsw_port2;
21 };
22
23 can_tc1: can-phy0 {
24 compatible = "ti,tcan1042";
25 #phy-cells = <0>;
26 max-bitrate = <8000000>;
27 standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
28 };
29
30 hdmi0: connector-hdmi {
31 compatible = "hdmi-connector";
32 label = "hdmi";
33 type = "a";
34
35 port {
36 hdmi_connector_in: endpoint {
37 remote-endpoint = <&sii9022_out>;
38 };
39 };
40 };
41
42 keys {
43 compatible = "gpio-keys";
44 autorepeat;
45 pinctrl-names = "default";
46 pinctrl-0 = <&gpio_keys_pins_default>;
47
48 key-home {
49 label = "home";
50 linux,code = <KEY_HOME>;
51 gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
52 };
53
54 key-menu {
55 label = "menu";
56 linux,code = <KEY_MENU>;
57 gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
58 };
59 };
60
61 sound {
62 compatible = "simple-audio-card";
63 simple-audio-card,name = "phyBOARD-Lyra";
64 simple-audio-card,widgets =
65 "Microphone", "Mic Jack",
66 "Headphone", "Headphone Jack",
67 "Speaker", "External Speaker";
68 simple-audio-card,routing =
69 "MIC3R", "Mic Jack",
70 "Mic Jack", "Mic Bias",
71 "Headphone Jack", "HPLOUT",
72 "Headphone Jack", "HPROUT",
73 "External Speaker", "SPOP",
74 "External Speaker", "SPOM";
75 simple-audio-card,format = "dsp_b";
76 simple-audio-card,bitclock-master = <&sound_master>;
77 simple-audio-card,frame-master = <&sound_master>;
78 simple-audio-card,bitclock-inversion;
79
80 simple-audio-card,cpu {
81 sound-dai = <&mcasp2>;
82 };
83
84 sound_master: simple-audio-card,codec {
85 sound-dai = <&audio_codec>;
86 clocks = <&audio_refclk1>;
87 };
88 };
89
90 leds {
91 compatible = "gpio-leds";
92 pinctrl-names = "default";
93 pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
94
95 led-1 {
96 gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
97 linux,default-trigger = "mmc0";
98 };
99
100 led-2 {
101 gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
102 linux,default-trigger = "mmc1";
103 };
104 };
105
106 vcc_1v8: regulator-vcc-1v8 {
107 compatible = "regulator-fixed";
108 regulator-name = "VCC_1V8";
109 regulator-min-microvolt = <1800000>;
110 regulator-max-microvolt = <1800000>;
111 regulator-always-on;
112 regulator-boot-on;
113 };
114
115 vcc_3v3_hdmi: regulator-vcc-3v3-hdmi {
116 compatible = "regulator-fixed";
117 regulator-name = "VCC_3V3_HDMI";
118 regulator-min-microvolt = <3300000>;
119 regulator-max-microvolt = <3300000>;
120 vin-supply = <&vcc_3v3_sw>;
121 regulator-always-on;
122 regulator-boot-on;
123 };
124
125 vcc_1v2_hdmi: regulator-vcc-1v2-hdmi {
126 compatible = "regulator-fixed";
127 regulator-name = "HDMI_CVCC";
128 regulator-min-microvolt = <1200000>;
129 regulator-max-microvolt = <1200000>;
130 regulator-always-on;
131 regulator-boot-on;
132 };
133
134 vcc_3v3_mmc: regulator-vcc-3v3-mmc {
135 compatible = "regulator-fixed";
136 regulator-name = "VCC_3V3_MMC";
137 regulator-min-microvolt = <3300000>;
138 regulator-max-microvolt = <3300000>;
139 regulator-always-on;
140 regulator-boot-on;
141 bootph-all;
142 };
143
144 vcc_3v3_sw: regulator-vcc-3v3-sw {
145 compatible = "regulator-fixed";
146 regulator-name = "VCC_3V3_SW";
147 regulator-min-microvolt = <3300000>;
148 regulator-max-microvolt = <3300000>;
149 regulator-always-on;
150 regulator-boot-on;
151 };
152 };
153
154 &main_pmx0 {
155 audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
156 pinctrl-single,pins = <
157 AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
158 >;
159 };
160
161 gpio_keys_pins_default: gpio-keys-default-pins {
162 pinctrl-single,pins = <
163 AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
164 >;
165 };
166
167 gpio_exp_int_pins_default: gpio-exp-int-default-pins {
168 pinctrl-single,pins = <
169 AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
170 >;
171 };
172
173 hdmi_int_pins_default: hdmi-int-default-pins {
174 pinctrl-single,pins = <
175 AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
176 >;
177 };
178
179 main_dss0_pins_default: main-dss0-default-pins {
180 pinctrl-single,pins = <
181 AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
182 AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
183 AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
184 AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
185 AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
186 AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
187 AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
188 AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
189 AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
190 AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
191 AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
192 AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
193 AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
194 AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
195 AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
196 AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
197 AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
198 AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
199 AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
200 AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
201 >;
202 };
203
204 main_i2c1_pins_default: main-i2c1-default-pins {
205 pinctrl-single,pins = <
206 AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
207 AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
208 >;
209 };
210
211 main_mcan0_pins_default: main-mcan0-default-pins {
212 pinctrl-single,pins = <
213 AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
214 AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
215 >;
216 };
217
218 main_mcasp2_pins_default: main-mcasp2-default-pins {
219 pinctrl-single,pins = <
220 AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */
221 AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */
222 AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */
223 AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
224 >;
225 };
226
227 main_mmc1_pins_default: main-mmc1-default-pins {
228 pinctrl-single,pins = <
229 AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
230 AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
231 AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
232 AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
233 AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
234 AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
235 AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
236 >;
237 bootph-all;
238 };
239
240 main_rgmii2_pins_default: main-rgmii2-default-pins {
241 pinctrl-single,pins = <
242 AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
243 AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
244 AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
245 AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
246 AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
247 AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
248 AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
249 AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
250 AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
251 AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
252 AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
253 AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
254 >;
255 };
256
257 main_uart0_pins_default: main-uart0-default-pins {
258 pinctrl-single,pins = <
259 AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
260 AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
261 >;
262 bootph-all;
263 };
264
265 main_uart1_pins_default: main-uart1-default-pins {
266 pinctrl-single,pins = <
267 AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
268 AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
269 AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
270 AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
271 >;
272 bootph-pre-ram;
273 };
274
275 main_usb1_pins_default: main-usb1-default-pins {
276 pinctrl-single,pins = <
277 AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
278 >;
279 };
280
281 user_leds_pins_default: user-leds-default-pins {
282 pinctrl-single,pins = <
283 AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
284 >;
285 };
286 };
287
288 &cpsw3g {
289 pinctrl-names = "default";
290 pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
291 };
292
293 &cpsw_port2 {
294 phy-mode = "rgmii-id";
295 phy-handle = <&cpsw3g_phy3>;
296 };
297
298 &cpsw3g_mdio {
299 cpsw3g_phy3: ethernet-phy@3 {
300 compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
301 reg = <3>;
302 ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
303 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
304 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
305 };
306 };
307
308 &dss {
309 pinctrl-names = "default";
310 pinctrl-0 = <&main_dss0_pins_default>;
311 status = "okay";
312 };
313
314 &dss_ports {
315 #address-cells = <1>;
316 #size-cells = <0>;
317
318 /* VP2: DPI/HDMI Output */
319 port@1 {
320 reg = <1>;
321
322 dpi1_out: endpoint {
323 remote-endpoint = <&sii9022_in>;
324 };
325 };
326 };
327
328 &main_i2c1 {
329 pinctrl-names = "default";
330 pinctrl-0 = <&main_i2c1_pins_default>;
331 clock-frequency = <100000>;
332 status = "okay";
333
334 audio_codec: audio-codec@18 {
335 pinctrl-names = "default";
336 pinctrl-0 = <&audio_ext_refclk1_pins_default>;
337
338 #sound-dai-cells = <0>;
339 compatible = "ti,tlv320aic3007";
340 reg = <0x18>;
341 ai3x-micbias-vg = <2>;
342
343 AVDD-supply = <&vcc_3v3_sw>;
344 IOVDD-supply = <&vcc_3v3_sw>;
345 DRVDD-supply = <&vcc_3v3_sw>;
346 DVDD-supply = <&vcc_1v8>;
347 };
348
349 gpio_exp: gpio-expander@21 {
350 pinctrl-names = "default";
351 pinctrl-0 = <&gpio_exp_int_pins_default>;
352 compatible = "nxp,pcf8574";
353 reg = <0x21>;
354 interrupt-parent = <&main_gpio1>;
355 interrupts = <49 0>;
356 #gpio-cells = <2>;
357 gpio-controller;
358 interrupt-controller;
359 #interrupt-cells = <2>;
360 gpio-line-names = "", "GPIO1_CAN0_nEN",
361 "GPIO2_LED2", "GPIO3_LVDS_GPIO",
362 "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
363 "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
364 };
365
366 usb-pd@22 {
367 compatible = "ti,tps6598x";
368 reg = <0x22>;
369
370 connector {
371 compatible = "usb-c-connector";
372 label = "USB-C";
373 self-powered;
374 data-role = "dual";
375 power-role = "sink";
376 port {
377 usb_con_hs: endpoint {
378 remote-endpoint = <&typec_hs>;
379 };
380 };
381 };
382 };
383
384 sii9022: bridge-hdmi@39 {
385 compatible = "sil,sii9022";
386 reg = <0x39>;
387
388 interrupt-parent = <&main_gpio0>;
389 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
390 pinctrl-names = "default";
391 pinctrl-0 = <&hdmi_int_pins_default>;
392
393 iovcc-supply = <&vcc_3v3_hdmi>;
394 cvcc12-supply = <&vcc_1v2_hdmi>;
395
396 ports {
397 #address-cells = <1>;
398 #size-cells = <0>;
399
400 port@0 {
401 reg = <0>;
402
403 sii9022_in: endpoint {
404 remote-endpoint = <&dpi1_out>;
405 bus-width = <16>;
406 };
407 };
408
409 port@1 {
410 reg = <1>;
411
412 sii9022_out: endpoint {
413 remote-endpoint = <&hdmi_connector_in>;
414 };
415 };
416 };
417 };
418
419 eeprom@51 {
420 compatible = "atmel,24c02";
421 pagesize = <16>;
422 reg = <0x51>;
423 vcc-supply = <&vcc_3v3_mmc>;
424 };
425 };
426
427 &main_mcan0 {
428 pinctrl-names = "default";
429 pinctrl-0 = <&main_mcan0_pins_default>;
430 phys = <&can_tc1>;
431 status = "okay";
432 };
433
434 &main_uart0 {
435 pinctrl-names = "default";
436 pinctrl-0 = <&main_uart0_pins_default>;
437 bootph-all;
438 status = "okay";
439 };
440
441 &main_uart1 {
442 pinctrl-names = "default";
443 pinctrl-0 = <&main_uart1_pins_default>;
444 bootph-pre-ram;
445 /* Main UART1 may be used by TIFS firmware */
446 status = "okay";
447 };
448
449 &mcasp2 {
450 #sound-dai-cells = <0>;
451
452 pinctrl-names = "default";
453 pinctrl-0 = <&main_mcasp2_pins_default>;
454
455 /* MCASP_IIS_MODE */
456 op-mode = <0>;
457 tdm-slots = <2>;
458
459 /* 0: INACTIVE, 1: TX, 2: RX */
460 serial-dir = <
461 0 0 1 2
462 0 0 0 0
463 0 0 0 0
464 0 0 0 0
465 >;
466 status = "okay";
467 };
468
469 &sdhci1 {
470 vmmc-supply = <&vcc_3v3_mmc>;
471 vqmmc-supply = <&vddshv5_sdio>;
472 pinctrl-names = "default";
473 pinctrl-0 = <&main_mmc1_pins_default>;
474 disable-wp;
475 no-1-8-v;
476 bootph-all;
477 status = "okay";
478 };
479
480 &usbss0 {
481 ti,vbus-divider;
482 bootph-all;
483 status = "okay";
484 };
485
486 &usbss1 {
487 ti,vbus-divider;
488 status = "okay";
489 };
490
491 &usb0 {
492 usb-role-switch;
493 bootph-all;
494
495 port {
496 typec_hs: endpoint {
497 remote-endpoint = <&usb_con_hs>;
498 };
499 };
500 };
501
502 &usb1 {
503 dr_mode = "host";
504 pinctrl-names = "default";
505 pinctrl-0 = <&main_usb1_pins_default>;
506 };